Acrylic sheets (A) Possess 10 to 17 times greater breakage resistance than that of glass of equivalent thickness (B) Are generally unaffected by most household detergents (C) Possess the light transmission rate of 93% (D) All the above

Acrylic sheets
(A) Possess 10 to 17 times greater breakage resistance than that of glass of equivalent thickness
(B) Are generally unaffected by most household detergents
(C) Possess the light transmission rate of 93%
(D) All the above
by

1 Answer

Answer :

Answer: Option D
by

Related questions

The plywood (A) Has good strength along the panel only (B) Can be spilt in the plane of the panel (C) Has greater impact resistance to blows than ordinary wood (D) Cannot be bent more easily than ordinary wood of same thickness

Description : The plywood (A) Has good strength along the panel only (B) Can be spilt in the plane of the panel (C) Has greater impact resistance to blows than ordinary wood (D) Cannot be bent more easily than ordinary wood of same thickness

Last Answer : Answer: Option C

Gray King Assay and Swelling Index of a coal is a measure of its (A) Swelling characteristics (B) Abradability (C) Agglutinating properties (D) Resistance to impact breakage

Description : Gray King Assay and Swelling Index of a coal is a measure of its (A) Swelling characteristics (B) Abradability (C) Agglutinating properties (D) Resistance to impact breakage

Last Answer : (A) Swelling characteristics

In hydrodynamic lubrication, film thickness remains unaffected by change in speeds. a) True b) Increase with increase in speed c) Decrease with increase in speed d) Disappear as the speed tends to infinty

Description : In hydrodynamic lubrication, film thickness remains unaffected by change in speeds. a) True b) Increase with increase in speed c) Decrease with increase in speed d) Disappear as the speed tends to infinty

Last Answer : b) Increase with increase in speed

A steam carrying pipeline is insulated with two layers of insulating materials with the inferior insulation material forming the inner part. If the two insulating layers are interchanged, the heat conducted will (A) Increase (B) Decrease (C) Remain unaffected (D) May increase or decrease; depends on the thickness of each layer

Description : A steam carrying pipeline is insulated with two layers of insulating materials with the inferior insulation material forming the inner part. If the two insulating layers are interchanged, the heat conducted ... ) Remain unaffected (D) May increase or decrease; depends on the thickness of each layer

Last Answer : Option C

The plastics made from cellulose resin (A) Are as clear as glass (B) Are tough and strong (C) Possess excellent electrical properties (D) All the above

Description : The plastics made from cellulose resin (A) Are as clear as glass (B) Are tough and strong (C) Possess excellent electrical properties (D) All the above

Last Answer : Answer: Option D

Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads (D) Fanning friction factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads

Pick out the wrong statement. (A) Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre (B) Crimp is a measure of the difference between the length of the straightened and unstraightened fibre (C) Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning (D) Nylon fibres have greater water absorption capacity than polyester fibres

Description : Pick out the wrong statement. (A) Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre (B) ... fibres are all prepared by wet spinning (D) Nylon fibres have greater water absorption capacity than polyester fibres

Last Answer : (C) Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning

Pick up the correct statement from the following: (A) Corrugated sheet iron is made by passing plain sheets between grooved rollers (B) Strength and stiffness of corrugated sheets are considerably increased (C) Corrugated sheets are generally used on slanting roofs (D) All the above

Description : Pick up the correct statement from the following: (A) Corrugated sheet iron is made by passing plain sheets between grooved rollers (B) Strength and stiffness of corrugated sheets are considerably increased (C) Corrugated sheets are generally used on slanting roofs (D) All the above

Last Answer : Answer: Option D

Thickness of broken line markings on multi-lane road for lanes is generally kept (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Description : Thickness of broken line markings on multi-lane road for lanes is generally kept (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Last Answer : Answer: Option A

Thickness of broken centre line markings for a four lane road, is generally kept (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Description : Thickness of broken centre line markings for a four lane road, is generally kept (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Last Answer : Answer: Option C

The thickness of a reinforced brick partition wall, is generally kept (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

Description : The thickness of a reinforced brick partition wall, is generally kept (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

Last Answer : Answer: Option B

Interior thickness of concrete road slab for design wheel load 6300 kg and permissible flexural stress 21 kg/cm2 , is (A) 17.0 cm (B) 25.5 cm (C) 34.0 cm (D) 42.5 cm

Description : Interior thickness of concrete road slab for design wheel load 6300 kg and permissible flexural stress 21 kg/cm2 , is (A) 17.0 cm (B) 25.5 cm (C) 34.0 cm (D) 42.5 cm

Last Answer : Answer: Option B

The compressibility of clays is caused due to: (A) Expulsion of double layer water from in between the grains (B) Sliping of particles to new positions of greater density (C) Bending of particles as elastic sheets (D) All the above

Description : The compressibility of clays is caused due to: (A) Expulsion of double layer water from in between the grains (B) Sliping of particles to new positions of greater density (C) Bending of particles as elastic sheets (D) All the above

Last Answer : (D) All the above

If two wires of the same material have the same thickness but different length the blank wire will have greater resistance?

Description : If two wires of the same material have the same thickness but different length the blank wire will have greater resistance?

Last Answer : Materials

Pick up the correct statement from the following: (A) Plastics have generally low melting point (B) The coefficient of thermal expansion of plastics is about three times than that of steel (C) The acoustical boards prepared by impregnating fibre-glass with phenolic resins has absorption coefficient of about 0.67 (D) All the above

Description : Pick up the correct statement from the following: (A) Plastics have generally low melting point (B) The coefficient of thermal expansion of plastics is about three times than that of steel (C) ... fibre-glass with phenolic resins has absorption coefficient of about 0.67 (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following (A) The ratio of the up flux and down flux just above the snow surface, is called albedo (B) Spectral albedo of snow is calculated for the semi-infinite snow thickness (C) Water equivalent height of snow is the height of water column obtained by melting snow (D) All of these

Description : Pick up the correct statement from the following (A) The ratio of the up flux and down flux just above the snow surface, is called albedo (B) Spectral albedo of snow is calculated for the semi- ... equivalent height of snow is the height of water column obtained by melting snow (D) All of these

Last Answer : Answer: Option D

If d is the thickness of a concrete pavement, the equivalent radius b of resisting section for an interior loading, is (A) b = d 2 ) - 0.675 d (B) b = d 2 ) + 0.675 d (C) b = d 2 ) - 3.675 d (D) b = d 2 ) - 0.675 d

Description : If d is the thickness of a concrete pavement, the equivalent radius b of resisting section for an interior loading, is (A) b = d 2 ) - 0.675 d (B) b = d 2 ) + 0.675 d (C) b = d 2 ) - 3.675 d (D) b = d 2 ) - 0.675 d

Last Answer : Answer: Option D

Manganese steels (A) Are non-magnetic (B) Possess high electrical resistance (C) Possess low coefficient of expansion (D) All the above

Description : Manganese steels (A) Are non-magnetic (B) Possess high electrical resistance (C) Possess low coefficient of expansion (D) All the above

Last Answer : Answer: Option D

Which one of the following activities is not correct as applicable to brick corbels? (A) The maximum projection of the corbel should not be more than the thickness of the wall (B) The maximum projection of each corbel course should be limited to a quarter brick at a time (C) The discontinuous corbels are used to carry heavy concentrated loads (D) Stretcher bond is generally used for the construction of brick corbel

Description : Which one of the following activities is not correct as applicable to brick corbels? (A) The maximum projection of the corbel should not be more than the thickness of the wall (B) The ... to carry heavy concentrated loads (D) Stretcher bond is generally used for the construction of brick corbel

Last Answer : Answer: Option D

The coefficient of hardness of stones used in road work should be greater than (A) 10 (B) 12 (C) 15 (D) 17

Description : The coefficient of hardness of stones used in road work should be greater than (A) 10 (B) 12 (C) 15 (D) 17

Last Answer : Answer: Option D

The ratio of the thickness of web to that of flange of steel rolled structural beams and channels is (A) Less than 1 (B) Equal to 1 (C) Greater than 1 (D) Less than 1 in beams but greater than 1 in channels

Description : The ratio of the thickness of web to that of flange of steel rolled structural beams and channels is (A) Less than 1 (B) Equal to 1 (C) Greater than 1 (D) Less than 1 in beams but greater than 1 in channels

Last Answer : Answer: Option A

A receiver connected to an antenna whose resistance is 50 Ω has an equivalent noise resistance of 30Ω. Calculate its equivalent noise temperature if the noise figure is equal to 1.6. A. 17.4 K B. 174K C. 1.74K D. 17K

Description : A receiver connected to an antenna whose resistance is 50 Ω has an equivalent noise resistance of 30Ω. Calculate its equivalent noise temperature if the noise figure is equal to 1.6. A. 17.4 K B. 174K C. 1.74K D. 17K

Last Answer : B. 174K

The major cause of jacket crown breakage is, A. Inclusion of platinum foil B. Use of weak cementum C. Voids of porcelain D. Porcelain is thinner than 1mm

Description : The major cause of jacket crown breakage is, A. Inclusion of platinum foil B. Use of weak cementum C. Voids of porcelain D. Porcelain is thinner than 1mm

Last Answer : D. Porcelain is thinner than 1mm

The thickness of base slab of a retaining wall generally provided, is (A) One half of the width of the stem at the bottom (B) One-third of the width of the stem at the bottom (C) One fourth of the width of the steam at the bottom (D) Width of the stem at the bottom

Description : The thickness of base slab of a retaining wall generally provided, is (A) One half of the width of the stem at the bottom (B) One-third of the width of the stem at the bottom (C) One fourth of the width of the steam at the bottom (D) Width of the stem at the bottom

Last Answer : Answer: Option D

Three charged cylindrical sheets are present in three spaces with σ = 5 at R = 2m, σ = - 2 at R = 4m and σ = -3 at R = 5m. Find the flux density at R = 6m. a) 17/6 b) -17/6 c) 13/6 d) -13/6

Description : Three charged cylindrical sheets are present in three spaces with σ = 5 at R = 2m, σ = - 2 at R = 4m and σ = -3 at R = 5m. Find the flux density at R = 6m. a) 17/6 b) -17/6 c) 13/6 d) -13/6

Last Answer : d) -13/6

Select the correct statement. (A) More the value of group index, less thickness of pavement will be required (B) More the value of CBR, greater thickness of pavement will be required (C) Minimum and maximum values of group index can be 0 and 20 respectively (D) All of the above

Description : Select the correct statement. (A) More the value of group index, less thickness of pavement will be required (B) More the value of CBR, greater thickness of pavement will be required (C) Minimum and maximum values of group index can be 0 and 20 respectively (D) All of the above

Last Answer : Answer: Option C

The maximum of spacing of side face reinforcement shall not exceed [ A ] 300 mm [ B ] Web thickness [ C ] Lesser of (a) and (b) [ D ] Greater of (a) and (b)

Description : The maximum of spacing of side face reinforcement shall not exceed [ A ] 300 mm [ B ] Web thickness [ C ] Lesser of (a) and (b) [ D ] Greater of (a) and (b)

Last Answer : [ C ] Lesser of (a) and (b)

How can I prevent hair breakage and hair color fading?

Description : How can I prevent hair breakage and hair color fading?

Last Answer : Your problem with your colored hair must be the lack of usage of perfect conditioner after hair coloring. You should use a high quality conditioner to retain your hair health which is already prone to breakage. Don't ... I will put my reviews here on this thread. It's worth to have a look onto it.

Earthquake is caused by – (1) disturbance of earth surface (2) adjustment of layers of earth's crust (3) breakage of rock system (4) upliftment of rocks

Description : Earthquake is caused by – (1) disturbance of earth surface (2) adjustment of layers of earth's crust (3) breakage of rock system (4) upliftment of rocks

Last Answer : (1) disturbance of earth surface Explanation: Most earthquakes are minor tremors. Larger earthquakes usually begin with slight tremors but rapidly take the form of one or more violent shocks, and end in ... is called its focus; the point on the surface directly above the focus is the epicenter.

A breakable, mercury-filled thermometer should not be used in a lead-acid battery to measure electrolyte temperature, as an accidental breakage can cause ____________. A. severe sparking and explosions B. rapid oxidation of battery plates C. violent gassing at the positive plates D. corrosion on the battery terminals

Description : A breakable, mercury-filled thermometer should not be used in a lead-acid battery to measure electrolyte temperature, as an accidental breakage can cause ____________. A. severe sparking and explosions ... battery plates C. violent gassing at the positive plates D. corrosion on the battery terminals

Last Answer : Answer: A

Mercury filled thermometers should never be used to determine the temperature of the battery electrolyte because accidental breakage of the thermometer can cause __________________. A. severe sparking and explosions B. rapid oxidation of battery plates C. contamination of the electrolyte D. corrosion on the battery terminals

Description : Mercury filled thermometers should never be used to determine the temperature of the battery electrolyte because accidental breakage of the thermometer can cause __________________. A. severe sparking and ... of battery plates C. contamination of the electrolyte D. corrosion on the battery terminals

Last Answer : Answer: A

Duriron is (A) Acid resistant, brittle and very hard (B) High silicon iron (C) Prone to breakage due to thermal expansion because of its very high co￾efficient of thermal expansion (D) All (A), (B) and (C)

Description : Duriron is (A) Acid resistant, brittle and very hard (B) High silicon iron (C) Prone to breakage due to thermal expansion because of its very high co￾efficient of thermal expansion (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Lung cancer & DNA breakage are the major ill effects of excessive ozone exposure to human beings. Ozone layer depletion in the atmosphere is mainly caused by the presence of (A) CO2 (B) SO2 (C) Hydrocarbons (D) CFC (chloro fluoro carbon)

Description : Lung cancer & DNA breakage are the major ill effects of excessive ozone exposure to human beings. Ozone layer depletion in the atmosphere is mainly caused by the presence of (A) CO2 (B) SO2 (C) Hydrocarbons (D) CFC (chloro fluoro carbon)

Last Answer : (D) CFC (chloro fluoro carbon)

The elastic strain in copper is due to the (A) Motion of dislocations (B) Stretching of atomic bonds (C) Breakage of atomic bonds (D) None of the above

Description : The elastic strain in copper is due to the (A) Motion of dislocations (B) Stretching of atomic bonds (C) Breakage of atomic bonds (D) None of the above

Last Answer : Option A

It can be used in soil without much danger of breakage. a) Soft b) Dry c) Stumpy and Stony d) Wet

Description : It can be used in soil without much danger of breakage. a) Soft b) Dry c) Stumpy and Stony d) Wet

Last Answer : Stumpy and Stony

Alkylating agents exert cytotoxic action by inducing: A. Breakage of DNA strand B. Cross linking of DNA strands C. Abnormal pairing of purine and pyrimidine bases D. All of the above

Description : Alkylating agents exert cytotoxic action by inducing: A. Breakage of DNA strand B. Cross linking of DNA strands C. Abnormal pairing of purine and pyrimidine bases D. All of the above

Last Answer : D. All of the above

Earthquake is caused by (1) disturbance of earth surface (2) adjustment of layers of earth’s crust (3) breakage of rock system (4) upliftment of rocks

Description : Earthquake is caused by (1) disturbance of earth surface (2) adjustment of layers of earth’s crust (3) breakage of rock system (4) upliftment of rocks 

Last Answer : disturbance of earth surface

Acrylic is the name of (A) Cellulose resin (B) Alkyd resin (C) Methyl methacrylate (D) Cumarone-indene

Description : Acrylic is the name of (A) Cellulose resin (B) Alkyd resin (C) Methyl methacrylate (D) Cumarone-indene

Last Answer : Answer: Option C

Which of the following characteristics should the line supports for transmission lines possess ? (a) Low cost (b) High mechanical strength (c) Longer life (d) All of the above

Description : Which of the following characteristics should the line supports for transmission lines possess ? (a) Low cost (b) High mechanical strength (c) Longer life (d) All of the above

Last Answer : (d) All of the above

are the applications of cutting bar. a) Cutting metal sheets. b) Cutting glass type materials. c) Cutting grasses and forage. d) None of these

Description : are the applications of cutting bar. a) Cutting metal sheets. b) Cutting glass type materials. c) Cutting grasses and forage. d) None of these

Last Answer : Cutting grasses and forage

Fluorescent dyes are added in detergents to (A) Act as fabric brightener (by converting ultraviolet light to visible light) thereby improving the whiteness appearance of white fabrics (B) Attain distinctiveness from other brands (C) Act as tarnish inhibitor for metals like German silver (D) None of these

Description : Fluorescent dyes are added in detergents to (A) Act as fabric brightener (by converting ultraviolet light to visible light) thereby improving the whiteness appearance of white fabrics (B) Attain distinctiveness ... brands (C) Act as tarnish inhibitor for metals like German silver (D) None of these

Last Answer : (A) Act as fabric brightener (by converting ultraviolet light to visible light) thereby improving the whiteness appearance of white fabrics

Transmission lines when connected to antenna have A. capacitive load B. resistive load whose resistance is less than characteristics impedance C. resistive load at the resonant frequency D. resistive load whose resistance is greater than the characteristic impedance of the line

Description : Transmission lines when connected to antenna have A. capacitive load B. resistive load whose resistance is less than characteristics impedance C. resistive load at the resonant frequency D. resistive load whose resistance is greater than the characteristic impedance of the line

Last Answer : C. resistive load at the resonant frequency

The expertise that distinguishes auditors from accountants is in the a. Ability to interpret PAS/PFRS. b. Accumulation and interpretation of evidence. c. Ability to interpret generally accepted accounting principles. d. Requirement to possess education beyond the bachelor's degree.

Description : The expertise that distinguishes auditors from accountants is in the a. Ability to interpret PAS/PFRS. b. Accumulation and interpretation of evidence. c. Ability to interpret generally accepted accounting principles. d. Requirement to possess education beyond the bachelor's degree.

Last Answer : Accumulation and interpretation of evidence.

The organisms attached to the substratum, generally, possess (a) one single opening of the digestive canal (b) cilia on the surface to create water current (c) radial symmetry (d) asymmetrical body

Description : The organisms attached to the substratum, generally, possess (a) one single opening of the digestive canal (b) cilia on the surface to create water current (c) radial symmetry (d) asymmetrical body

Last Answer : (c) radial symmetry

Generally it has been witnessed that the compulsion of writing a research paper has generated anomaly because Options: A) Every teacher does not possess the proper aptitude for writing a research paper B) Every teacher does not have desirable qualities for writing a research paper C) Each teacher does not possess the scientific attitude to carry out the research D) All the above statements are correct

Description : Generally it has been witnessed that the compulsion of writing a research paper has generated anomaly because Options: A) Every teacher does not possess the proper aptitude for writing a research ... possess the scientific attitude to carry out the research D) All the above statements are correct

Last Answer : D) All the above statements are correct 

Coating thickness in case of galvanising of steel sheet generally corresponds to the deposition of __________ gms of zinc per m2 of steel strip. (A) 5-10 (B) 1000-1500 (C) 120-500 (D) 1500-3000

Description : Coating thickness in case of galvanising of steel sheet generally corresponds to the deposition of __________ gms of zinc per m2 of steel strip. (A) 5-10 (B) 1000-1500 (C) 120-500 (D) 1500-3000

Last Answer : Option C

Do you generally spend a lot on food and household stuff?

Description : Do you generally spend a lot on food and household stuff?

Last Answer : I have to admit I do. More than I should really…

The width of the flange of a T-beam should be less than (A) One-third of the effective span of the T-beam (B) Distance between the centres of T-beam (C) Breadth of the rib plus twelve times the thickness of the slab (D) Least of the above

Description : The width of the flange of a T-beam should be less than (A) One-third of the effective span of the T-beam (B) Distance between the centres of T-beam (C) Breadth of the rib plus twelve times the thickness of the slab (D) Least of the above

Last Answer : Answer: Option D

The width of the flange of a L-beam, should be less than (A) One-sixth of the effective span (B) Breadth of the rib + four times thickness of the slab (C) Breadth of the rib + half clear distance between ribs (D) Least of the above

Description : The width of the flange of a L-beam, should be less than (A) One-sixth of the effective span (B) Breadth of the rib + four times thickness of the slab (C) Breadth of the rib + half clear distance between ribs (D) Least of the above

Last Answer : Answer: Option D