The presence of lime in cement (a) Make s the cement sound and provides strength to the cement. (b) Prolong the setting time (c) Causes unsoundness in cement (d) All the above

The presence of lime in cement
(a) Make s the cement sound and provides strength to the cement.
(b) Prolong the setting time
(c) Causes unsoundness in cement
(d) All the above
by

1 Answer

Answer :

(a) Make s the cement sound and provides strength to the cement.
by

Related questions

Soundness test of cement determines (A) Quality of free lime (B) Ultimate strength (C) Durability (D) Initial setting

Description : Soundness test of cement determines (A) Quality of free lime (B) Ultimate strength (C) Durability (D) Initial setting

Last Answer : Answer: Option A

Pick up the correct statement from the following: (A) The lime in excess makes the cement unsound and causes the cement to expand and disintegrate (B) The silica in excess makes the cement stronger but its setting time also increases (C) The excess amount of alumina weakens the cement (D) All the above

Description : Pick up the correct statement from the following: (A) The lime in excess makes the cement unsound and causes the cement to expand and disintegrate (B) The silica in excess makes the cement stronger ... time also increases (C) The excess amount of alumina weakens the cement (D) All the above

Last Answer : Answer: Option D

Pick out the wrong statement. (A) High early strength cement are made from materials having high silica to lime ratio (B) The function of gypsum in cement is to enhance its initial setting rate (C) Acid resistant cements are known as silicate cement (D) Major component of greyish Portland cement is tricalcium silicate

Description : Pick out the wrong statement. (A) High early strength cement are made from materials having high silica to lime ratio (B) The function of gypsum in cement is to enhance its initial ... cements are known as silicate cement (D) Major component of greyish Portland cement is tricalcium silicate

Last Answer : (A) High early strength cement are made from materials having high silica to lime ratio

Pick up the correct statement from the following: (A) Lime in excess, causes the cement to expand and disintegrate (B) Silica in excess, causes the cement to set slowly (C) Alumina in excess, reduces the strength of the cement (D) All the above

Description : Pick up the correct statement from the following: (A) Lime in excess, causes the cement to expand and disintegrate (B) Silica in excess, causes the cement to set slowly (C) Alumina in excess, reduces the strength of the cement (D) All the above

Last Answer : Answer: Option D

Tricalcium aluminate (C3A) (A) Reacts fast with water (B) Generates less heat of hydration (C) Causes initial setting and early strength of cement (D) Does not contribute to develop ultimate strength

Description : Tricalcium aluminate (C3A) (A) Reacts fast with water (B) Generates less heat of hydration (C) Causes initial setting and early strength of cement (D) Does not contribute to develop ultimate strength

Last Answer : Answer: Option B

The cement becomes unsound by the presence of excess (A) Sulphur (B) Magnesia (C) Lime (D) All of these

Description : The cement becomes unsound by the presence of excess (A) Sulphur (B) Magnesia (C) Lime (D) All of these

Last Answer : Answer: Option D

Quick lime is (i) Slow in setting (ii) Rapid in slacking (iii) Good in strength The correct answer is (A) Only (i) (B) Only (ii) (C) Both (i) and (ii) (D) Both (ii) and (

Description : Quick lime is (i) Slow in setting (ii) Rapid in slacking (iii) Good in strength The correct answer is (A) Only (i) (B) Only (ii) (C) Both (i) and (ii) (D) Both (ii) and (

Last Answer : Answer: Option C

The high strength of rapid hardening cement at early stage, is due to its (A) Finer grinding (B) Burning at high temperature (C) Increased lime cement (D) Higher content of tricalcium

Description : The high strength of rapid hardening cement at early stage, is due to its (A) Finer grinding (B) Burning at high temperature (C) Increased lime cement (D) Higher content of tricalcium

Last Answer : Answer: Option C

Rapid hardening cement attains early strength due to (A) Larger proportion of lime grounded finer than normal cement (B) Lesser proportion of lime grounded coarser than normal cement (C) Lesser proportion of lime grounded finer than normal cement (D) Excess percentage of gypsum

Description : Rapid hardening cement attains early strength due to (A) Larger proportion of lime grounded finer than normal cement (B) Lesser proportion of lime grounded coarser than normal cement (C) Lesser proportion of lime grounded finer than normal cement (D) Excess percentage of gypsum

Last Answer : Answer: Option A

In order to provide colour, hardness and strength to the cement, the ingredient used is (a) Lime (b) Solica (c) Alumina (d) Iron oxide

Description : In order to provide colour, hardness and strength to the cement, the ingredient used is (a) Lime (b) Solica (c) Alumina (d) Iron oxide

Last Answer : (d) Iron oxide

For quality control of Portland cement, the test essentially done is (A) Setting time (B) Tensile strength (C) Consistency (D) All the above

Description : For quality control of Portland cement, the test essentially done is (A) Setting time (B) Tensile strength (C) Consistency (D) All the above

Last Answer : D

Pick up the correct statement regarding low heat cement from the following: (A) It possesses less compressive strength (B) Its initial setting time is about one hour (C) Its final setting time is about 10 hours (D) All the above

Description : Pick up the correct statement regarding low heat cement from the following: (A) It possesses less compressive strength (B) Its initial setting time is about one hour (C) Its final setting time is about 10 hours (D) All the above

Last Answer : Answer: Option D

Le-Chatelier's device is used for determining the (A) Setting time of cement (B) Soundness of cement (C) Tensile strength of cement (D) Compressive strength of cement

Description : Le-Chatelier's device is used for determining the (A) Setting time of cement (B) Soundness of cement (C) Tensile strength of cement (D) Compressive strength of cement

Last Answer : Answer: Option B

The gypsum is added to the cement for (a) Providing high strength to the cement (b) Controlling the initial setting time of cement. (c) Lowering the clinkering temp of cement (d) All the above.

Description : The gypsum is added to the cement for (a) Providing high strength to the cement (b) Controlling the initial setting time of cement. (c) Lowering the clinkering temp of cement (d) All the above.

Last Answer : (b) Controlling the initial setting time of cement.

The deleterious materials present in the aggregate (a) Prevent normal hydration of cement (b) Reduce the strength and durability of concrete. (c) Modify the setting action and cause efloresecence. (d) All of the above

Description : The deleterious materials present in the aggregate (a) Prevent normal hydration of cement (b) Reduce the strength and durability of concrete. (c) Modify the setting action and cause efloresecence. (d) All of the above

Last Answer : (d) All of the above

Di-calcium silicate (C2S) (A) Hydrates rapidly (B) Generates less heat of hydration (C) Hardens rapidly (D) Provides less ultimate strength to cement

Description : Di-calcium silicate (C2S) (A) Hydrates rapidly (B) Generates less heat of hydration (C) Hardens rapidly (D) Provides less ultimate strength to cement

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) Water cement paste hardens due to hydration (B) During hardening cement binds the aggregates together (C) Cement provides strength, durability and water tightness to the concrete (D) All the above

Description : Pick up the correct statement from the following: (A) Water cement paste hardens due to hydration (B) During hardening cement binds the aggregates together (C) Cement provides strength, durability and water tightness to the concrete (D) All the above

Last Answer : Answer: Option D

Cement containing excess amount of lime – (1) cracks during setting (2) becomes more strong (3) is slow setting (4) is quick setting

Description : Cement containing excess amount of lime – (1) cracks during setting (2) becomes more strong (3) is slow setting (4) is quick setting

Last Answer : (1) cracks during setting Explanation: In cement almost entire amount of lime is present in combined state as calcium silicates and calcium aluminates. Cement containing excess amount of lime cracks during ... less amount of lime is weak in strength. Setting of cement is an exothermic process.

Cement containing excess amount of lime (1) cracks during setting (2) becomes more strong (3) is slow setting (4) is quick setting

Description : Cement containing excess amount of lime (1) cracks during setting (2) becomes more strong (3) is slow setting (4) is quick setting 

Last Answer :  cracks during setting

Excess lime when added (a) Makes the cement unsound (b) Causes the cement to expand and disintegrate (c) Lowering the clinkering temp of cement (d) Both ‘a’ and ‘b’

Description : Excess lime when added (a) Makes the cement unsound (b) Causes the cement to expand and disintegrate (c) Lowering the clinkering temp of cement (d) Both ‘a’ and ‘b’

Last Answer : (d) Both ‘a’ and ‘b’

Which of the following ingredient of cement when added in excess quantity, causes the cement to set slowly. (a) Lime (b) Silica (c) Alumina (d) Iron oxide

Description : Which of the following ingredient of cement when added in excess quantity, causes the cement to set slowly. (a) Lime (b) Silica (c) Alumina (d) Iron oxide

Last Answer : Lime is a common ingredient in cement. It is typically added in small amounts to help the cement set more quickly. Adding too much lime can cause the cement to set slowly. Alumina, silica, and iron oxide are also common ingredients in cement, but they do not have an effect on the setting time.

Pick up the incorrect statement from the following: (A) The degree of grinding of cement, is called fineness (B) The process of changing cement paste into hard mass, is known as setting of cement (C) The phenomenon by virtue of which cement does not allow transmission of sound, is known as soundness of cement (D) The heat generated during chemical reaction of cement with water, is known as heat of hydration

Description : Pick up the incorrect statement from the following: (A) The degree of grinding of cement, is called fineness (B) The process of changing cement paste into hard mass, is known as setting of ... (D) The heat generated during chemical reaction of cement with water, is known as heat of hydration

Last Answer : Answer: Option C

Much of the disciplinary and motivational difficulties experiences by teachers stem from Options: A) Personal mal adjustment on the part of teachers or pupils B) The failure of the curriculum to meet pupil's needs C) The theoretical unsoundness of progressive education D) The relatively greater appeal of other interests competing for the child's attention

Description : Much of the disciplinary and motivational difficulties experiences by teachers stem from Options: A) Personal mal adjustment on the part of teachers or pupils B) The failure of the curriculum ... education D) The relatively greater appeal of other interests competing for the child's attention

Last Answer : B) The failure of the curriculum to meet pupil's needs 

Le Chatelier apparatus is used to determine which of the following properties for cement A) Soundness* b) Initial setting time c) Compressive strength d) Tensile strength

Description : Le Chatelier apparatus is used to determine which of the following properties for cement A) Soundness* b) Initial setting time c) Compressive strength d) Tensile strength

Last Answer : A) Soundness*

The addition of gypsum to portland cement helps in : (1) increasing the strength of cement (2) rapid setting of cement (3) preventing rapid setting of cement (4) reduction in the cost of cement

Description : The addition of gypsum to portland cement helps in : (1) increasing the strength of cement (2) rapid setting of cement (3) preventing rapid setting of cement (4) reduction in the cost of cement

Last Answer : preventing rapid setting of cement

Addition of pozzolana to ordinary port land cement, causes (A) Decrease in early strength (B) Reduction in chemical action with sulphates (C) Increase in shrinkage (D) All the above

Description : Addition of pozzolana to ordinary port land cement, causes (A) Decrease in early strength (B) Reduction in chemical action with sulphates (C) Increase in shrinkage (D) All the above

Last Answer : Answer: Option D

The initial setting time of hydraulic lime, is (A) 30 minutes (B) 60 minutes (C) 90 minutes (D) 120 minutes

Description : The initial setting time of hydraulic lime, is (A) 30 minutes (B) 60 minutes (C) 90 minutes (D) 120 minutes

Last Answer : Answer: Option D

Pozzolana (or surkhi) is used in lime (A) To impart hydraulicity (B) To prevent shrinkage (C) To decrease the cost of construction (D) To decrease the setting time

Description : Pozzolana (or surkhi) is used in lime (A) To impart hydraulicity (B) To prevent shrinkage (C) To decrease the cost of construction (D) To decrease the setting time

Last Answer : Answer: Option A

The initial setting time of lime-pozzolana, is (A) 30 minutes (B) 60 minutes (C) 90 minutes (D) 120 minutes

Description : The initial setting time of lime-pozzolana, is (A) 30 minutes (B) 60 minutes (C) 90 minutes (D) 120 minutes

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The heating of a material to redness in contact with air, is known as calcination (B) The property of lime by which it sets or hardens in damp places having no free circulation of air is called setting (C) The product that remains after calcination of limestone, is called lime (D) All the above

Description : Pick up the correct statement from the following: (A) The heating of a material to redness in contact with air, is known as calcination (B) The property of lime by which it sets or hardens in ... (C) The product that remains after calcination of limestone, is called lime (D) All the above

Last Answer : Answer: Option D

The property by virtue of which lime sets under water, is known as (A) Slacking (B) Setting (C) Hydraulicity (D) Calcining

Description : The property by virtue of which lime sets under water, is known as (A) Slacking (B) Setting (C) Hydraulicity (D) Calcining

Last Answer : Answer: Option C

The binder normally used in flexible pavement construction is (A) Cement (B) Lime (C) Bitumen (D) None of the above

Description : The binder normally used in flexible pavement construction is (A) Cement (B) Lime (C) Bitumen (D) None of the above

Last Answer : Answer: Option C

Pavement is said to be flexible if it contains (A) Water bound macadam surface (B) Stabilised soil base constructed of lime cement or tar (C) Bitumen-bound stone layer of varying aggregates (D) All the above

Description : Pavement is said to be flexible if it contains (A) Water bound macadam surface (B) Stabilised soil base constructed of lime cement or tar (C) Bitumen-bound stone layer of varying aggregates (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Bricks are paid per thousand (B) Cement is paid per 50 kg bag (C) Lime is paid per quintal (D) All the above

Description : Pick up the correct statement from the following: (A) Bricks are paid per thousand (B) Cement is paid per 50 kg bag (C) Lime is paid per quintal (D) All the above

Last Answer : (D) All the above

The commonly used material in the manufacture of cement is (A) Sand stone (B) Slate (C) Lime stone (D) Graphite

Description : The commonly used material in the manufacture of cement is (A) Sand stone (B) Slate (C) Lime stone (D) Graphite

Last Answer : (C) Lime stone

To obtain cement dry powder, lime stones and shales or their slurry, is burnt in a rotary kiln at a temperature between (A) 1100° and 1200°C (B) 1200° and 1300°C (C) 1300° and 1400°C (D) 1400° and 1500°C

Description : To obtain cement dry powder, lime stones and shales or their slurry, is burnt in a rotary kiln at a temperature between (A) 1100° and 1200°C (B) 1200° and 1300°C (C) 1300° and 1400°C (D) 1400° and 1500°C

Last Answer : D

Ordinary Portland cement is manufactured from (A) Lime stone and clay (B) Gypsum and lime (C) Pozzolana (D) Lime, pozzolana and clay

Description : Ordinary Portland cement is manufactured from (A) Lime stone and clay (B) Gypsum and lime (C) Pozzolana (D) Lime, pozzolana and clay

Last Answer : Answer: Option B

The minimum percentage of chemical ingredient of cement is that of (A) Magnesium oxide (B) Iron oxide (C) Alumina (D) Lime

Description : The minimum percentage of chemical ingredient of cement is that of (A) Magnesium oxide (B) Iron oxide (C) Alumina (D) Lime

Last Answer : Answer: Option A

The maximum percentage of chemical ingredient of cement is that of (A) Magnesium oxide (B) Iron oxide (C) Silica (D) Lime

Description : The maximum percentage of chemical ingredient of cement is that of (A) Magnesium oxide (B) Iron oxide (C) Silica (D) Lime

Last Answer : Answer: Option D

Pick up the correct proportions of chemical ingredients of cement (A) Lime : Silica : Alumina : Iron oxide : 63 : 22 : 6 : 3 (B) Silica : Lime : Alumina : Iron oxide : 63 : 22 : 6 : 3 (C) Alumina : Silica : Lime : Iron oxide : 63 : 22 : 6 : 3 (D) Iron oxide : Alumina : Silica : Lime : 63 : 22 : 6 : 3

Description : Pick up the correct proportions of chemical ingredients of cement (A) Lime : Silica : Alumina : Iron oxide : 63 : 22 : 6 : 3 (B) Silica : Lime : Alumina : Iron oxide : 63 : 22 : 6 : 3 (C) Alumina : Silica : ... oxide : 63 : 22 : 6 : 3 (D) Iron oxide : Alumina : Silica : Lime : 63 : 22 : 6 : 3

Last Answer : Answer: Option A

The commonly used raw material in the manufacture of cement, is (A) Slate (B) Sand stone (C) Lime stone (D) Basalt

Description : The commonly used raw material in the manufacture of cement, is (A) Slate (B) Sand stone (C) Lime stone (D) Basalt

Last Answer : Answer: Option C

The base material for distemper, is (A) Chalk (B) Lime (C) Lime putty (D) Cement wash

Description : The base material for distemper, is (A) Chalk (B) Lime (C) Lime putty (D) Cement wash

Last Answer : Answer: Option A

Cement paints usually (A) Contain hydrated lime (B) Contain 5% to 10% colour pigments (C) Contain 5% sodium chloride (D) All the above

Description : Cement paints usually (A) Contain hydrated lime (B) Contain 5% to 10% colour pigments (C) Contain 5% sodium chloride (D) All the above

Last Answer : Answer: Option D

Which one of the following is an air binding material? (A) Gypsum (B) Acid-resistant cement (C) Quick lime (D) All of these

Description : Which one of the following is an air binding material? (A) Gypsum (B) Acid-resistant cement (C) Quick lime (D) All of these

Last Answer : Answer: Option D

For the manufacture of Portland cement, the proportions of raw materials used, are (A) Lime 63% ; silica 22% ; other ingredients 15% (B) Lime 22% ; silica 63% ; other ingredients 15% (C) Silica 40% ; lime 40% ; other ingredients 20% (D) Silica 70% ; lime 20% ; other ingredients 10%

Description : For the manufacture of Portland cement, the proportions of raw materials used, are (A) Lime 63% ; silica 22% ; other ingredients 15% (B) Lime 22% ; silica 63% ; other ingredients 15% (C) Silica 40% ; lime 40% ; other ingredients 20% (D) Silica 70% ; lime 20% ; other ingredients 10%

Last Answer : Answer: Option A

The main ingredients of Portland cement are (A) Lime and silica (B) Lime and alumina (C) Silica and alumina (D) Lime and iron

Description : The main ingredients of Portland cement are (A) Lime and silica (B) Lime and alumina (C) Silica and alumina (D) Lime and iron

Last Answer : Answer: Option A

The mortar in which both cement and lime are used as binding materials, is called (A) Cement mortar (B) Lime mortar (C) Fire resistant mortar (D) Gauged mortar

Description : The mortar in which both cement and lime are used as binding materials, is called (A) Cement mortar (B) Lime mortar (C) Fire resistant mortar (D) Gauged mortar

Last Answer : Answer: Option D

The stone masonry of finely dressed stones laid in cement or lime, is (A) Random rubble masonry (B) Coursed rubble masonry (C) Dry rubble masonry (D) Ashlar masonry

Description : The stone masonry of finely dressed stones laid in cement or lime, is (A) Random rubble masonry (B) Coursed rubble masonry (C) Dry rubble masonry (D) Ashlar masonry

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Lime mortar with cement in the ratio of in 10 is cheaper and better for outside plaster (B) For very cold or very hot climate, a compact and closed plan should be provided (C) On the sea coast, an exposed and open house is generally preferred (D) All the above

Description : Pick up the correct statement from the following: (A) Lime mortar with cement in the ratio of in 10 is cheaper and better for outside plaster (B) For very cold or very hot climate, a compact and closed ... (C) On the sea coast, an exposed and open house is generally preferred (D) All the above

Last Answer : Answer: Option D

Consider the following statements: Maximum slenderness ratio of load-bearing masonry walls for a dwelling having more than two storeys shall not exceed. 1. 12, if lime mortar is used 2. 18, if cement-lime mortar 1:2:9 is used 3. 24, if cement mortar 1:6 is used\ Which of these statements are correct? (a) 1 and 2 only b) 2 and 3 only c) 1 and 3 only d)1, 2 and 3

Description : Consider the following statements: Maximum slenderness ratio of load-bearing masonry walls for a dwelling having more than two storeys shall not exceed. 1. 12, if lime mortar is used 2. 18, if cement-lime mortar 1:2:9 is used 3. 24, ... ? (a) 1 and 2 only b) 2 and 3 only c) 1 and 3 only d)1, 2 and 3

Last Answer : b) 2 and 3 only