For the manufacture of Portland cement, the proportions of raw materials used, are (A) Lime 63% ; silica 22% ; other ingredients 15% (B) Lime 22% ; silica 63% ; other ingredients 15% (C) Silica 40% ; lime 40% ; other ingredients 20% (D) Silica 70% ; lime 20% ; other ingredients 10%

For the manufacture of Portland cement, the proportions of raw materials used, are
(A) Lime 63% ; silica 22% ; other ingredients 15%
(B) Lime 22% ; silica 63% ; other ingredients 15%
(C) Silica 40% ; lime 40% ; other ingredients 20%
(D) Silica 70% ; lime 20% ; other ingredients 10%
by

1 Answer

Answer :

Answer: Option A
by

Related questions

Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Description : Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Last Answer : Option A

Pick up the correct proportions of chemical ingredients of cement (A) Lime : Silica : Alumina : Iron oxide : 63 : 22 : 6 : 3 (B) Silica : Lime : Alumina : Iron oxide : 63 : 22 : 6 : 3 (C) Alumina : Silica : Lime : Iron oxide : 63 : 22 : 6 : 3 (D) Iron oxide : Alumina : Silica : Lime : 63 : 22 : 6 : 3

Description : Pick up the correct proportions of chemical ingredients of cement (A) Lime : Silica : Alumina : Iron oxide : 63 : 22 : 6 : 3 (B) Silica : Lime : Alumina : Iron oxide : 63 : 22 : 6 : 3 (C) Alumina : Silica : ... oxide : 63 : 22 : 6 : 3 (D) Iron oxide : Alumina : Silica : Lime : 63 : 22 : 6 : 3

Last Answer : Answer: Option A

The main ingredients of Portland cement are (A) Lime and silica (B) Lime and alumina (C) Silica and alumina (D) Lime and iron

Description : The main ingredients of Portland cement are (A) Lime and silica (B) Lime and alumina (C) Silica and alumina (D) Lime and iron

Last Answer : Answer: Option A

The main ingredients of Portland cement are a) Lime and silica* b) Lime and Alumina c) Alumina magnesia d) Silica and Alumina

Description : The main ingredients of Portland cement are a) Lime and silica* b) Lime and Alumina c) Alumina magnesia d) Silica and Alumina

Last Answer : a) Lime and silica*

Pick out the wrong statement. (A) High early strength cement are made from materials having high silica to lime ratio (B) The function of gypsum in cement is to enhance its initial setting rate (C) Acid resistant cements are known as silicate cement (D) Major component of greyish Portland cement is tricalcium silicate

Description : Pick out the wrong statement. (A) High early strength cement are made from materials having high silica to lime ratio (B) The function of gypsum in cement is to enhance its initial ... cements are known as silicate cement (D) Major component of greyish Portland cement is tricalcium silicate

Last Answer : (A) High early strength cement are made from materials having high silica to lime ratio

The proportion of lime, silica, alumina and iron oxide in a Portland cement is (a) 63:22:6:3 (b) 63:22:3:6 (c) 22:63:6:3 (d) All the above

Description : The proportion of lime, silica, alumina and iron oxide in a Portland cement is (a) 63:22:6:3 (b) 63:22:3:6 (c) 22:63:6:3 (d) All the above

Last Answer : (a) 63:22:6:3

Radioactive iodine uptake by thyroid gland 24 hours of a test dose is (A) 1.5–15% of the test done (B) 15–20% of the test done (C) 20–40% of the test done (D) 50–70% of the test done

Description : Radioactive iodine uptake by thyroid gland 24 hours of a test dose is (A) 1.5–15% of the test done (B) 15–20% of the test done (C) 20–40% of the test done (D) 50–70% of the test done

Last Answer : Answer : C

Carbide tipped cutting tools are manufactured by powder metallurgy techniques and have a composition of (A) 90% tungsten carbide and 10% cobalt (B) 70% aluminium oxide & 30% silica (C) 30% nickel, 15% chromium & 55% tungsten (D) 65% tungsten & 35% zirconium

Description : Carbide tipped cutting tools are manufactured by powder metallurgy techniques and have a composition of (A) 90% tungsten carbide and 10% cobalt (B) 70% aluminium oxide & 30% silica (C) 30% nickel, 15% chromium & 55% tungsten (D) 65% tungsten & 35% zirconium

Last Answer : Option A

The strength of concrete using air entraining cement gets reduced by (a) 5 to 10% (b) 10 to 15% (c) 15 to 20% (d) 20 to 25%

Description : The strength of concrete using air entraining cement gets reduced by (a) 5 to 10% (b) 10 to 15% (c) 15 to 20% (d) 20 to 25%

Last Answer : (b) 10 to 15%

In fineness test on cement, residue left on I.S. sieve no.9 shall not exceed __________ by weight of the sample of cement [ A ] 5% [ B ] 10% [ C ] 15% [ D ] 20%

Description : In fineness test on cement, residue left on I.S. sieve no.9 shall not exceed __________ by weight of the sample of cement [ A ] 5% [ B ] 10% [ C ] 15% [ D ] 20%

Last Answer : [ B ] 10%

Which of the following series of discounts is the best for a customer? (A) Successive discounts of 10% ,20%,30% (B) Successive discounts of 20%,20%,20% (C) Successive discounts of 15%,15%,15%,15% (D) Successive discounts of 20%,40% a) A b) B c) C d) D e) A and B

Description : Which of the following series of discounts is the best for a customer? (A) Successive discounts of 10% ,20%,30% (B) Successive discounts of 20%,20%,20% (C) Successive discounts of 15%,15%,15%,15% (D) Successive discounts of 20%,40% a) A b) B c) C d) D e) A and B

Last Answer : consider the price as 100 A = 100 × 0.9 × 0.8 × 0.7 =50.4 B = 100 × 0.8 × 0.8 × 0.8=51.2 C = 100 × 0.85 × 0.85 × 0.85 ×0.85 ~ =52.2 D = 100 × 0.8 × 0.6 =48 We see that the maximum discount of 52% (100-48) is on D, which is the best for a customer. Answer : d

Which of the following series of discounts is the best for a customer? (A) Successive discounts of 10% ,20%,30% (B) Successive discounts of 20%,20%,20% (C) Successive discounts of 15%,15%,15%,15% (D) Successive discounts of 20%,40% a) A b) B c) C d) D e) A and B

Description : Which of the following series of discounts is the best for a customer? (A) Successive discounts of 10% ,20%,30% (B) Successive discounts of 20%,20%,20% (C) Successive discounts of 15%,15%,15%,15% (D) Successive discounts of 20%,40% a) A b) B c) C d) D e) A and B

Last Answer : consider the price as 100 A = 100 × 0.9 × 0.8 × 0.7 =50.4 B = 100 × 0.8 × 0.8 × 0.8=51.2 C = 100 × 0.85 × 0.85 × 0.85 ×0.85 ~ =52.2 D = 100 × 0.8 × 0.6 =48 We see that the maximum discount of 52% (100-48) is on D, which is the best for a customer. Answer : d

The commonly used raw material in the manufacture of cement, is (A) Slate (B) Sand stone (C) Lime stone (D) Basalt

Description : The commonly used raw material in the manufacture of cement, is (A) Slate (B) Sand stone (C) Lime stone (D) Basalt

Last Answer : Answer: Option C

Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Description : Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Last Answer : (D) None of these

Pick up the incorrect statement from the following. While performing preliminary test on concrete (A) Proportions of the material and water should be the same as to be used at the work site (B) Cement should be mixed by hand in order to maintain uniformity (C) Concrete mix should be stored in air-tight containers (D) Concrete ingredients should be kept at a temperature of 37° ± 2°C

Description : Pick up the incorrect statement from the following. While performing preliminary test on concrete (A) Proportions of the material and water should be the same as to be used at the work site (B) ... in air-tight containers (D) Concrete ingredients should be kept at a temperature of 37° 2°C

Last Answer : Answer: Option D

In a system designed to work out the tax to be paid:An employee has £4000 of salary tax free. The next £1500 is taxed at 10% the next £28000 is taxed at 22%. Any further amount is taxed at 40% Which of these groups of numbers would fall into the same equivalence class? a) £4800; £14000; £28000 b) £5200; £5500; £28000 c) £28001; £32000; £35000 d) £5800; £28000; £32000

Description : In a system designed to work out the tax to be paid:An employee has £4000 of salary tax free. The next £1500 is taxed at 10% the next £28000 is taxed at 22%. Any further amount is taxed at 40% ... ) £4800; £14000; £28000 b) £5200; £5500; £28000 c) £28001; £32000; £35000 d) £5800; £28000; £32000

Last Answer : d) £5800; £28000; £32000

In a system designed to work out the tax to be paid: An employee has £4000 of salary tax free. The next £1500 is taxed at 10%. The next £28000 after that is taxed at 22%. Any further amount is taxed at 40%. To the nearest whole pound, which of these is a valid Boundary Value Analysis test case? A. £28000. B. £33501. C. £32001. D. £1500

Description : In a system designed to work out the tax to be paid: An employee has £4000 of salary tax free. The next £1500 is taxed at 10%. The next £28000 after that is taxed at 22%. Any further amount is taxed ... of these is a valid Boundary Value Analysis test case? A. £28000. B. £33501. C. £32001. D. £1500

Last Answer : B. £33501.

The usual percentages of clay and metal in cermet are: (A) 50%, 50% (B) 60%, 40% (C) 70%, 30% (D) 80%, 20%

Description : The usual percentages of clay and metal in cermet are: (A) 50%, 50% (B) 60%, 40% (C) 70%, 30% (D) 80%, 20%

Last Answer : Answer: Option D

Calcareous and argillaceous materials used in manufacture of cement consists of (a) Lime stone (b) Chalk (c) Shales (d) All the above

Description : Calcareous and argillaceous materials used in manufacture of cement consists of (a) Lime stone (b) Chalk (c) Shales (d) All the above

Last Answer : (d) All the above

The sum of the percentage of tricalcium silicate and dicalcium silicate for Portland cement varies from. (a) 50 to 60% (b) 60 to 70% (c) 70 to 80% (d) 80 to 90%

Description : The sum of the percentage of tricalcium silicate and dicalcium silicate for Portland cement varies from. (a) 50 to 60% (b) 60 to 70% (c) 70 to 80% (d) 80 to 90%

Last Answer : (c) 70 to 80%

The tensile strength of concrete is about ________ of its compressive strength [ A ] 10% to 15% [ B ] 30% to 40% [ C ] 50% [ D ] 60% to 75%

Description : The tensile strength of concrete is about ________ of its compressive strength [ A ] 10% to 15% [ B ] 30% to 40% [ C ] 50% [ D ] 60% to 75%

Last Answer : [ A ] 10% to 15%

The percentage of water for normal consistency, is (A) 5% to 15% (B) 10% to 25% (C) 15% to 25% (D) 20% to 30%

Description : The percentage of water for normal consistency, is (A) 5% to 15% (B) 10% to 25% (C) 15% to 25% (D) 20% to 30%

Last Answer : Answer: Option C

A good brick earth should contain: (A) About 20% to 30% of alumina (B) About 50% to 60% of silica (C) Not more than 5% of lime (D) All the above

Description : A good brick earth should contain: (A) About 20% to 30% of alumina (B) About 50% to 60% of silica (C) Not more than 5% of lime (D) All the above

Last Answer : Answer: Option D

Ordinary Portland cement is manufactured from (A) Lime stone and clay (B) Gypsum and lime (C) Pozzolana (D) Lime, pozzolana and clay

Description : Ordinary Portland cement is manufactured from (A) Lime stone and clay (B) Gypsum and lime (C) Pozzolana (D) Lime, pozzolana and clay

Last Answer : Answer: Option B

Chief constituent of ordinary Portland cement is [ A ] Lime [ B ] Alumina [ C ] Magnesia [ D ] Iron oxide

Description : Chief constituent of ordinary Portland cement is [ A ] Lime [ B ] Alumina [ C ] Magnesia [ D ] Iron oxide

Last Answer : [ A ] Lime

When compared to ordinary Portland cement, Rapid hardening Portland cement contains ______________ amount of lime content [ A ] Equal [ B ] Greater [ C ] Lesser [ D ] Zero

Description : When compared to ordinary Portland cement, Rapid hardening Portland cement contains ______________ amount of lime content [ A ] Equal [ B ] Greater [ C ] Lesser [ D ] Zero

Last Answer : [ B ] Greater

Pick up the correct statement from the following: (A) A soil having pH value more than 7 is an acidic soil (B) A soil having pH value less than 7 is an acidic soil (C) A soil having pH value more than 7 is an alkaline soil (D) A soil containing chemicals for the manufacture of Portland cement is preferred

Description : Pick up the correct statement from the following: (A) A soil having pH value more than 7 is an acidic soil (B) A soil having pH value less than 7 is an acidic soil (C) A soil ... more than 7 is an alkaline soil (D) A soil containing chemicals for the manufacture of Portland cement is preferred

Last Answer : Answer: Option B

For an ordinary Portland cement (A) Residual does not exceed 10% when sieved through IS Sieve No. 9 (B) Soundness varies from 5 to 10 mm (C) Initial setting time is not less than 30 minutes (D) Compressive stress after 7 days, is not less than 175 kg/cm2

Description : For an ordinary Portland cement (A) Residual does not exceed 10% when sieved through IS Sieve No. 9 (B) Soundness varies from 5 to 10 mm (C) Initial setting time is not less than 30 minutes (D) Compressive stress after 7 days, is not less than 175 kg/cm2

Last Answer : (C) Initial setting time is not less than 30 minutes

According to IS Code , the requirement of an ordinary Portland cement is (a) The residue does not exceed 10% when sieved through is sieve no .9 (b) Its initial setting time is not less than 30 minutes. (c) its expansion is not morethan 10mm for unaerated cement (d) All the above.

Description : According to IS Code , the requirement of an ordinary Portland cement is (a) The residue does not exceed 10% when sieved through is sieve no .9 (b) Its initial setting time is not less than 30 minutes. (c) its expansion is not morethan 10mm for unaerated cement (d) All the above.

Last Answer : (d) All the above.

Volumetric efficiency of air compressor is of the order of A. 20% to 30 % B. 40% to 50% C. 60% to 70% D. 70% to 90%

Description : Volumetric efficiency of air compressor is of the order of A. 20% to 30 % B. 40% to 50% C. 60% to 70% D. 70% to 90%

Last Answer : ANSWER : D

Approximately how many businesses content marketing is used? A. 20% to 30% B. 40% to 50% C. 60% to 70% D. 80% to 90%

Description : Approximately how many businesses content marketing is used? A. 20% to 30% B. 40% to 50% C. 60% to 70% D. 80% to 90%

Last Answer : D. 80% to 90%

Pick up the correct statement from the following: (A) Cement should be mixed for at least one minute (B) 10% of water is placed in the rotating drum before adding dry material (C) 10% of water is added after placing the other ingredients in the drum (D) All the above

Description : Pick up the correct statement from the following: (A) Cement should be mixed for at least one minute (B) 10% of water is placed in the rotating drum before adding dry material (C) 10% of water is added after placing the other ingredients in the drum (D) All the above

Last Answer : Answer: Option D

Rankine cycle efficiency in a good steam power station may be in the range between........ a.15% - 20% b.35% - 40% c.50% - 60% d.90% - 95%

Description : Rankine cycle efficiency in a good steam power station may be in the range between........ a.15% - 20% b.35% - 40% c.50% - 60% d.90% - 95%

Last Answer : b.35% - 40%

Mr. Sachin spent 20% of his monthly income on food and 15% on children’s education. 40% of the remaining he spent on entertainment and transport together and 30% on the medical. He is left with an amount of Rs.8, 775/- after all these expenditures. What is Mr. Sachin’s monthly income ?

Description : Mr. Sachin spent 20% of his monthly income on food and 15% on children's education. 40% of the remaining he spent on entertainment and transport together and 30% on the medical. He is left with an amount of Rs.8, 775/- after ... 000/- b) Rs.46,000/- c) Rs.36, 000/- d) Rs.29,000/- e) None of these

Last Answer : Let the total income of Mr.Sachin be 100 According to question, 100 – 20 –15 = 65 × 60/100 × 70/100 = 27.3. 27.3 = 100 8775 = 100/27.3 × 8775 = Rs. 32142. Answer: e)

What is the starting awareness percentage of a new product? a. 15% b. 65% c. 40% d. 25% e. 20%

Description : What is the starting awareness percentage of a new product? a. 15% b. 65% c. 40% d. 25% e. 20%

Last Answer : d. 25%

Rate of depreciation in case of oil well: a. 40% b. 20% c. 15% d. 30%

Description : Rate of depreciation in case of oil well: a. 40% b. 20% c. 15% d. 30%

Last Answer : c. 15%

A concrete using an air entrained cement (A) Has strength less than 10% to 15% (B) Has more resistance to weathering (C) Is more plastic and workable (D) Is free from segregation and bleeding

Description : A concrete using an air entrained cement (A) Has strength less than 10% to 15% (B) Has more resistance to weathering (C) Is more plastic and workable (D) Is free from segregation and bleeding

Last Answer : Answer: Option C

The maximum percentage of chemical ingredient of cement is that of (A) Magnesium oxide (B) Iron oxide (C) Silica (D) Lime

Description : The maximum percentage of chemical ingredient of cement is that of (A) Magnesium oxide (B) Iron oxide (C) Silica (D) Lime

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Lime in excess, causes the cement to expand and disintegrate (B) Silica in excess, causes the cement to set slowly (C) Alumina in excess, reduces the strength of the cement (D) All the above

Description : Pick up the correct statement from the following: (A) Lime in excess, causes the cement to expand and disintegrate (B) Silica in excess, causes the cement to set slowly (C) Alumina in excess, reduces the strength of the cement (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The lime in excess makes the cement unsound and causes the cement to expand and disintegrate (B) The silica in excess makes the cement stronger but its setting time also increases (C) The excess amount of alumina weakens the cement (D) All the above

Description : Pick up the correct statement from the following: (A) The lime in excess makes the cement unsound and causes the cement to expand and disintegrate (B) The silica in excess makes the cement stronger ... time also increases (C) The excess amount of alumina weakens the cement (D) All the above

Last Answer : Answer: Option D

Efflorescence is cement is caused due to the excess of (a) Lime (b) Silica (c) Alkalies (d) Iron oxide

Description : Efflorescence is cement is caused due to the excess of (a) Lime (b) Silica (c) Alkalies (d) Iron oxide

Last Answer : (c) Alkalies

Which of the following ingredient of cement when added in excess quantity, causes the cement to set slowly. (a) Lime (b) Silica (c) Alumina (d) Iron oxide

Description : Which of the following ingredient of cement when added in excess quantity, causes the cement to set slowly. (a) Lime (b) Silica (c) Alumina (d) Iron oxide

Last Answer : Lime is a common ingredient in cement. It is typically added in small amounts to help the cement set more quickly. Adding too much lime can cause the cement to set slowly. Alumina, silica, and iron oxide are also common ingredients in cement, but they do not have an effect on the setting time.

The maximum percentage of chemical ingredient of cement is (a) Alumina (b) Iron oxide (c) Lime (d) Silica

Description : The maximum percentage of chemical ingredient of cement is (a) Alumina (b) Iron oxide (c) Lime (d) Silica

Last Answer : (c) Lime

The minimum percentage of chemical ingredient of cement is [ A ] Iron oxide [ B ] Silica [ C ] Lime [ D ] Magnesium oxide

Description : The minimum percentage of chemical ingredient of cement is [ A ] Iron oxide [ B ] Silica [ C ] Lime [ D ] Magnesium oxide

Last Answer : [ D ] Magnesium oxide

The maximum percentage of chemical ingredient of cement is [ A ] Iron oxide [ B ] Silica [ C ] Lime [ D ] Magnesium oxide

Description : The maximum percentage of chemical ingredient of cement is [ A ] Iron oxide [ B ] Silica [ C ] Lime [ D ] Magnesium oxide

Last Answer : [ C ] Lime

White cement contains less amount of ___________ [ A ] Lime [ B ] Silica [ C ] Alumina [ D ] Iron oxide

Description : White cement contains less amount of ___________ [ A ] Lime [ B ] Silica [ C ] Alumina [ D ] Iron oxide

Last Answer : [ D ] Iron oxide

What is the rate of depreciation charged on Computer Software: a) 10% b) 60% c) 40% d) 15%

Description : What is the rate of depreciation charged on Computer Software: a) 10% b) 60% c) 40% d) 15%

Last Answer : b) 60%

125mL of 63% (w/v) `H_(2)C_(2)O_(4).2H_(2)O` solution is made to react with 125mL of a `40%` (w/v) `NaOH` solution. The resulting solution is : (ignor

Description : 125mL of 63% (w/v) `H_(2)C_(2)O_(4).2H_(2)O` solution is made to react with 125mL of a `40%` (w/v) `NaOH` solution. The resulting solution is : (ignor

Last Answer : 125mL of 63% (w/v) `H_(2)C_(2)O_(4).2H_(2)O` solution is made to react with 125mL of a ... ions) A. netural B. acidic C. strongly acidic D. alkaline

MALT constitutes about percent of the lymphoid tissue in human body. (a) 20% (b) 70% (c) 10% (d) 50%

Description : MALT constitutes about percent of the lymphoid tissue in human body. (a) 20% (b) 70% (c) 10% (d) 50%

Last Answer : d) 50%

Bronze is an alloy of copper, zinc , and tin having composition (A) 60% - 30% - 10% (B) 70% - 20% - 10% (C) 88% - 2% - 10% (D) 50% -30% - 20%

Description : Bronze is an alloy of copper, zinc , and tin having composition (A) 60% - 30% - 10% (B) 70% - 20% - 10% (C) 88% - 2% - 10% (D) 50% -30% - 20%

Last Answer : (C) 88% - 2% - 10%