Pick up the correct statement from the following: (A) The quality of water governs the strength of concrete (B) 10% excess of water reduces the strength of concrete by 15% (C) 30% excess of water reduces the strength of concrete by 50% (D) All the above

Pick up the correct statement from the following:
(A) The quality of water governs the strength of concrete
(B) 10% excess of water reduces the strength of concrete by 15%
(C) 30% excess of water reduces the strength of concrete by 50%
(D) All the above
by

1 Answer

Answer :

Answer: Option D
by

Related questions

The tensile strength of concrete is about ________ of its compressive strength [ A ] 10% to 15% [ B ] 30% to 40% [ C ] 50% [ D ] 60% to 75%

Description : The tensile strength of concrete is about ________ of its compressive strength [ A ] 10% to 15% [ B ] 30% to 40% [ C ] 50% [ D ] 60% to 75%

Last Answer : [ A ] 10% to 15%

If 30% excess water is added, the strength of concrete is reduced by (a) 30% (b) 40% (c) 50% (d) 60%

Description : If 30% excess water is added, the strength of concrete is reduced by (a) 30% (b) 40% (c) 50% (d) 60%

Last Answer : (c) 50%

The removal of excess air after placing concrete helps in increasing the strength of concrete by (a) 15 to 20% (b) 20 to 30% (c) 30 to 50% (d) 50 to 70%

Description : The removal of excess air after placing concrete helps in increasing the strength of concrete by (a) 15 to 20% (b) 20 to 30% (c) 30 to 50% (d) 50 to 70%

Last Answer : (a) 15 to 20%

Pick up the incorrect statement from the following: (A) With passage of time, the strength of cement increases (B) With passage of time, the strength of cement decreases (C) After a period of 24 months, the strength of cement reduces to 50% (D) The concrete made with storage deteriorated cement, gains strength with time

Description : Pick up the incorrect statement from the following: (A) With passage of time, the strength of cement increases (B) With passage of time, the strength of cement decreases (C) After a ... of cement reduces to 50% (D) The concrete made with storage deteriorated cement, gains strength with time

Last Answer : Answer: Option A

Normally, the tensile strength of concrete is about____________of its compressive strength (a) 10 to 15% (b) 15 to 20% (c) 20 to 25% (d) 25 to 30%

Description : Normally, the tensile strength of concrete is about____________of its compressive strength (a) 10 to 15% (b) 15 to 20% (c) 20 to 25% (d) 25 to 30%

Last Answer : (a) 10 to 15%

Pick up the correct statement from the following: (A) Lime in excess, causes the cement to expand and disintegrate (B) Silica in excess, causes the cement to set slowly (C) Alumina in excess, reduces the strength of the cement (D) All the above

Description : Pick up the correct statement from the following: (A) Lime in excess, causes the cement to expand and disintegrate (B) Silica in excess, causes the cement to set slowly (C) Alumina in excess, reduces the strength of the cement (D) All the above

Last Answer : Answer: Option D

Select incorrect statement from the following [ A ] With passage of time, the strength of cement decreases [ B ] With passage of time, the strength of cement increases [ C ] After a period of 24 months, the strength of cement reduces to 50% [ D ] The concrete made with storage deteriorated cement; gains strength with time.

Description : Select incorrect statement from the following [ A ] With passage of time, the strength of cement decreases [ B ] With passage of time, the strength of cement increases [ C ] After a period ... cement reduces to 50% [ D ] The concrete made with storage deteriorated cement; gains strength with time.

Last Answer : [ B ] With passage of time, the strength of cement increases

The strength of concrete after one year as compared to 28 days strength is about (A) 10 to 15% more (B) 15 to 20% more (C) 20 to 25% more (D) 25 to 50% more

Description : The strength of concrete after one year as compared to 28 days strength is about (A) 10 to 15% more (B) 15 to 20% more (C) 20 to 25% more (D) 25 to 50% more

Last Answer : Answer: Option C

A concrete mass containing 5% of voids [ A ] Increases its strength by 30% [ B ] Reduces its strength by 30% [ C ] Increases its strength by 5% [ D ] Reduces its strength by 5%

Description : A concrete mass containing 5% of voids [ A ] Increases its strength by 30% [ B ] Reduces its strength by 30% [ C ] Increases its strength by 5% [ D ] Reduces its strength by 5%

Last Answer : [ B ] Reduces its strength by 30%

A concrete using an air entrained cement (A) Has strength less than 10% to 15% (B) Has more resistance to weathering (C) Is more plastic and workable (D) Is free from segregation and bleeding

Description : A concrete using an air entrained cement (A) Has strength less than 10% to 15% (B) Has more resistance to weathering (C) Is more plastic and workable (D) Is free from segregation and bleeding

Last Answer : Answer: Option C

The strength of concrete using air entraining cement gets reduced by (a) 5 to 10% (b) 10 to 15% (c) 15 to 20% (d) 20 to 25%

Description : The strength of concrete using air entraining cement gets reduced by (a) 5 to 10% (b) 10 to 15% (c) 15 to 20% (d) 20 to 25%

Last Answer : (b) 10 to 15%

Pick up the correct statement from the following: (A) Domestic use of water is 50% of total consumption (B) Average consumption of commercial use of water is 25% of total consumption (C) Waste water and leakage is 15% of total consumption (D) All the above

Description : Pick up the correct statement from the following:  (A) Domestic use of water is 50% of total consumption  (B) Average consumption of commercial use of water is 25% of total consumption  (C) Waste water and leakage is 15% of total consumption  (D) All the above 

Last Answer : (D) All the above 

The percentage of water for normal consistency, is (A) 5% to 15% (B) 10% to 25% (C) 15% to 25% (D) 20% to 30%

Description : The percentage of water for normal consistency, is (A) 5% to 15% (B) 10% to 25% (C) 15% to 25% (D) 20% to 30%

Last Answer : Answer: Option C

By over-reinforcing a beam, the moment of resistance can be increased not more than [ A ] 10% [ B ] 15% [ C ] 25% [ D ] 50%

Description : By over-reinforcing a beam, the moment of resistance can be increased not more than [ A ] 10% [ B ] 15% [ C ] 25% [ D ] 50%

Last Answer : [ C ] 25%

Use of improved implements has potential to reduce the cost of cultivation up to a)10% b) 30% c) 20% d) 15%

Description : Use of improved implements has potential to reduce the cost of cultivation up to a)10% b) 30% c) 20% d) 15%

Last Answer : 20%

Use of improved implements has potential to increase productivity up to a)10% b) 30% c) 20% d) 15%

Description : . Use of improved implements has potential to increase productivity up to a)10% b) 30% c) 20% d) 15%

Last Answer : 30%

Carbide tipped cutting tools are manufactured by powder metallurgy techniques and have a composition of (A) 90% tungsten carbide and 10% cobalt (B) 70% aluminium oxide & 30% silica (C) 30% nickel, 15% chromium & 55% tungsten (D) 65% tungsten & 35% zirconium

Description : Carbide tipped cutting tools are manufactured by powder metallurgy techniques and have a composition of (A) 90% tungsten carbide and 10% cobalt (B) 70% aluminium oxide & 30% silica (C) 30% nickel, 15% chromium & 55% tungsten (D) 65% tungsten & 35% zirconium

Last Answer : Option A

Which of the following series of discounts is the best for a customer? (A) Successive discounts of 10% ,20%,30% (B) Successive discounts of 20%,20%,20% (C) Successive discounts of 15%,15%,15%,15% (D) Successive discounts of 20%,40% a) A b) B c) C d) D e) A and B

Description : Which of the following series of discounts is the best for a customer? (A) Successive discounts of 10% ,20%,30% (B) Successive discounts of 20%,20%,20% (C) Successive discounts of 15%,15%,15%,15% (D) Successive discounts of 20%,40% a) A b) B c) C d) D e) A and B

Last Answer : consider the price as 100 A = 100 × 0.9 × 0.8 × 0.7 =50.4 B = 100 × 0.8 × 0.8 × 0.8=51.2 C = 100 × 0.85 × 0.85 × 0.85 ×0.85 ~ =52.2 D = 100 × 0.8 × 0.6 =48 We see that the maximum discount of 52% (100-48) is on D, which is the best for a customer. Answer : d

Which of the following series of discounts is the best for a customer? (A) Successive discounts of 10% ,20%,30% (B) Successive discounts of 20%,20%,20% (C) Successive discounts of 15%,15%,15%,15% (D) Successive discounts of 20%,40% a) A b) B c) C d) D e) A and B

Description : Which of the following series of discounts is the best for a customer? (A) Successive discounts of 10% ,20%,30% (B) Successive discounts of 20%,20%,20% (C) Successive discounts of 15%,15%,15%,15% (D) Successive discounts of 20%,40% a) A b) B c) C d) D e) A and B

Last Answer : consider the price as 100 A = 100 × 0.9 × 0.8 × 0.7 =50.4 B = 100 × 0.8 × 0.8 × 0.8=51.2 C = 100 × 0.85 × 0.85 × 0.85 ×0.85 ~ =52.2 D = 100 × 0.8 × 0.6 =48 We see that the maximum discount of 52% (100-48) is on D, which is the best for a customer. Answer : d

By what percentage should V2 be greater than VMCA? a. 30% b. 10% c. 20% d. 15%

Description : By what percentage should V2 be greater than VMCA? a. 30% b. 10% c. 20% d. 15%

Last Answer : b. 10%

By what percentage should V2 be greater than VMCA? a. 30% b. 10% c. 20% d. 15%

Description : By what percentage should V2 be greater than VMCA? a. 30% b. 10% c. 20% d. 15%

Last Answer : b. 10%

Pick up the correct statement from the following: (A) A highly absorptive aggregate reduces the workability of concrete considerably (B) The specific gravity of aggregate is important for the determination of the moisture content (C) The absorption and porosity of an aggregate influence the property of the concrete (D) All the above

Description : Pick up the correct statement from the following: (A) A highly absorptive aggregate reduces the workability of concrete considerably (B) The specific gravity of aggregate is important for the determination ... and porosity of an aggregate influence the property of the concrete (D) All the above

Last Answer : Answer: Option D

For preparing ordinary concrete, the quantity of water used, is (A) 5% by weight of aggregates plus 20% of weight of cement (B) 10% by weight of aggregates plus 10% of weight of cement (C) 5% by weight of aggregates plus 30% of weight of cement (D) 30% by weight of aggregates plus 10% of weight of cement

Description : For preparing ordinary concrete, the quantity of water used, is (A) 5% by weight of aggregates plus 20% of weight of cement (B) 10% by weight of aggregates plus 10% of weight of cement (C) ... aggregates plus 30% of weight of cement (D) 30% by weight of aggregates plus 10% of weight of cement

Last Answer : Answer: Option C

An excess of flaky particles in concrete aggregates (A) Decreases the workability (B) Increases the quantity of water and sand (C) More than 15% are not desirable (D) All the above

Description : An excess of flaky particles in concrete aggregates (A) Decreases the workability (B) Increases the quantity of water and sand (C) More than 15% are not desirable (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Insufficient quantity of water makes the concrete mix harsh (B) Insufficient quantity of water makes the concrete unworkable (C) Excess quantity of water makes the concrete segregated (D) All the above

Description : Pick up the correct statement from the following: (A) Insufficient quantity of water makes the concrete mix harsh (B) Insufficient quantity of water makes the concrete unworkable (C) Excess quantity of water makes the concrete segregated (D) All the above

Last Answer : (D) All the above

It takes 6 hours to dry a wet solid from 50% moisture content to the critical moisture content of 15%. How much longer it will take to dry the solid to 10% moisture content, under the same drying conditions? (The equilibrium moisture content of the solid is 5%). (A) 15 min (B) 51 min (C) 71 min (D) 94 min

Description : It takes 6 hours to dry a wet solid from 50% moisture content to the critical moisture content of 15%. How much longer it will take to dry the solid to 10% moisture content, under the same drying conditions? (The ... 5%). (A) 15 min (B) 51 min (C) 71 min (D) 94 min

Last Answer : (C) 71 min

When estimating project time schedules using industry standards for a systems project, the following values are acceptable: 15% for planning, 25% for analysis, 50% for design, and 10% for implementation.

Description : When estimating project time schedules using industry standards for a systems project,  the following values are acceptable: 15% for planning, 25% for analysis, 50% for design,  and 10% for implementation.

Last Answer : Ans: False

XYZ Co, is having 15% share capital held by X Company and 50% held by Central Government and 10% held by State Government and 25% held by other people then that company will be A. Government Company B. Private Company C. Public Company D. None of these

Description : XYZ Co, is having 15% share capital held by X Company and 50% held by Central Government and 10% held by State Government and 25% held by other people then that company will be A. Government Company B. Private Company C. Public Company D. None of these

Last Answer : C. Public Company

What percentage of world's freshwater is stored as glacial ice? (1) 50% (2) 10% (3) 70% (4) 30%

Description : What percentage of world's freshwater is stored as glacial ice? (1) 50% (2) 10% (3) 70% (4) 30%

Last Answer : (3) 70% Explanation: About 70% of the world's fresh water is stored as glacial ice. Only 3% water of the earth is fresh, rest 97% salted. Of that 3%, over 2% is frozen in ice sheets and glaciers. Means less than 1% fresh water is found in lakes, rivers and underground.

The top atmosphere of the Earth directly reflects back into space nearly what part of the total amount of sun’s energy coming to it? A. 10% B. 20% C. 30% (Answer) D. 50%

Description : The top atmosphere of the Earth directly reflects back into space nearly what part of the total amount of sun’s energy coming to it? A. 10% B. 20% C. 30% (Answer) D. 50%

Last Answer : C. 30% (Answer)

The calorific value of a gas of composition CO2 = 20%, H2 = 50%, CH4 = 30%, is y. If the composition of gas is changed to H2 = 50%, CH4 = 30%, CO2 = 10%, N2 = 10%, then the calorific value will be (A) y (B) 0.95 y (C) 1.05 y (D) 1.8 y

Description : The calorific value of a gas of composition CO2 = 20%, H2 = 50%, CH4 = 30%, is y. If the composition of gas is changed to H2 = 50%, CH4 = 30%, CO2 = 10%, N2 = 10%, then the calorific value will be (A) y (B) 0.95 y (C) 1.05 y (D) 1.8 y

Last Answer : (A) y

Bronze is an alloy of copper, zinc , and tin having composition (A) 60% - 30% - 10% (B) 70% - 20% - 10% (C) 88% - 2% - 10% (D) 50% -30% - 20%

Description : Bronze is an alloy of copper, zinc , and tin having composition (A) 60% - 30% - 10% (B) 70% - 20% - 10% (C) 88% - 2% - 10% (D) 50% -30% - 20%

Last Answer : (C) 88% - 2% - 10%

What percentage of world’s freshwater is stored as glacial ice ? (1) 50% (2) 10% (3) 70% (4) 30%

Description : What percentage of world’s freshwater is stored as glacial ice ? (1) 50% (2) 10% (3) 70% (4) 30%

Last Answer : 70%

Pick out the wrong statement. (A) Low intensity explosives are also called propellants, whereas high intensity explosive are called detonators (B) Gun powder comprises of 75% salt petre, 15% charcoal and 10% sulphur (C) Lead azide is a popular military explosive (D) TNT is a hygroscopic explosive having very high melting point and is non-toxic to human being

Description : Pick out the wrong statement. (A) Low intensity explosives are also called propellants, whereas high intensity explosive are called detonators (B) Gun powder comprises of 75% salt petre, 15% charcoal ... TNT is a hygroscopic explosive having very high melting point and is non-toxic to human being

Last Answer : (D) TNT is a hygroscopic explosive having very high melting point and is non-toxic to human being

Pick out the wrong statement. (A) The annual depreciation rate for machinery and equipments in a chemical process plant is about 10% of the fixed capital investment (B) Annual depreciation rate of buildings in a chemical plant is about 3% of its initial cost (C) Insurance rates on annual basis in a chemical plant may be about 1% of the fixed capital investment (D) In a chemical industry, research and development cost amounts to about 15% of net sales realisation (NSR)

Description : Pick out the wrong statement. (A) The annual depreciation rate for machinery and equipments in a chemical process plant is about 10% of the fixed capital investment (B) Annual depreciation rate ... chemical industry, research and development cost amounts to about 15% of net sales realisation (NSR)

Last Answer : (D) In a chemical industry, research and development cost amounts to about 15% of net sales realisation (NSR)

Pick up the correct statement from the following: (A) Water enables chemical reaction to take place with cement (B) Water lubricates the mixture of gravel, sand and cement (C) Strength of concrete structure largely depends upon its workability (D) All the above

Description : Pick up the correct statement from the following: (A) Water enables chemical reaction to take place with cement (B) Water lubricates the mixture of gravel, sand and cement (C) Strength of concrete structure largely depends upon its workability (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) Water cement paste hardens due to hydration (B) During hardening cement binds the aggregates together (C) Cement provides strength, durability and water tightness to the concrete (D) All the above

Description : Pick up the correct statement from the following: (A) Water cement paste hardens due to hydration (B) During hardening cement binds the aggregates together (C) Cement provides strength, durability and water tightness to the concrete (D) All the above

Last Answer : Answer: Option D

If high yield strength deformed bars are used, the are of distribution reinforcement in slabs, should not less than. (a) 0.12% of the gross area of concrete (b) 0.15% of the gross area of concrete (c) 0.18% of the gross area of concrete (d) 0.20% of the gross area of concrete

Description : If high yield strength deformed bars are used, the are of distribution reinforcement in slabs, should not less than. (a) 0.12% of the gross area of concrete (b) 0.15% of the gross area of concrete (c) 0.18% of the gross area of concrete (d) 0.20% of the gross area of concrete

Last Answer : (a) 0.12% of the gross area of concrete

Pick up the incorrect statement from the following. For performing compressive strength test of cement (A) Cement and standard sand mortar are used in the ratio of 1 : 3 (B) Water is added at the rate of (P/4) + 3.0 percentage of water where P is the percentage of water for standard consistency (C) A cube mould of 10 cm × 10 cm × 10 cm is used (D) The prepared moulds are kept in a atmosphere of 50% relative humidity

Description : Pick up the incorrect statement from the following. For performing compressive strength test of cement (A) Cement and standard sand mortar are used in the ratio of 1 : 3 (B) Water is added at the ... cm 10 cm is used (D) The prepared moulds are kept in a atmosphere of 50% relative humidity

Last Answer : Answer: Option A

Pick up the correct statement from the following: (A) The concrete gains strength due to hydration of cement (B) The concrete does not set at freezing point (C) The strength of concrete increases with its age (D) All the above

Description : Pick up the correct statement from the following: (A) The concrete gains strength due to hydration of cement (B) The concrete does not set at freezing point (C) The strength of concrete increases with its age (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C) Curing of concrete is done for proper compaction of cement (D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Description : Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C ... D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Last Answer : Option D

Pick out the false statement pertaining to water treatment(A) Aeration of water is effective in CO2removal(B) The zeolite water softening process reduces the hardness of water by notmore than 50%(C) Sodium sulphate or sodium carbonate do not cause hardness in water(D) Water with pH value less than 7, is acidic.

Description : Pick out the false statement pertaining to water treatment. (A) Aeration of water is effective in CO2 removal (B) The zeolite water softening process reduces the hardness of water by not more than 50% (C ... carbonate do not cause hardness in water (D) Water with pH value less than 7, is acidic

Last Answer : (B) The zeolite water softening process reduces the hardness of water by not more than 50%

Pick up the correct statement from the following: A. Hydrogen sulphide gas in excess, may cause corrosion of concrete sewers B. 4 ppm of Dissolved Oxygen (D.O.) is ensured before discharging the treated sewage in river C. Solubility of oxygen in sewage is 95% of that of distilled water D. All the above

Description : Pick up the correct statement from the following: A. Hydrogen sulphide gas in excess, may cause corrosion of concrete sewers B. 4 ppm of Dissolved Oxygen (D.O.) is ensured before discharging the treated ... river C. Solubility of oxygen in sewage is 95% of that of distilled water D. All the above

Last Answer : ANS: D

Increase in the moisture content in concrete (A) Reduces the strength (B) Increases the strength (C) Does not change the strength (D) All of the abo

Description : Increase in the moisture content in concrete (A) Reduces the strength (B) Increases the strength (C) Does not change the strength (D) All of the above

Last Answer : Answer: Option A

A concrete structure is set on fire and the temperature raises to 1000°C. The strength of concrete as compared to original strength reduces to (A) 10 % (B) 15 % (C) 20 % (D) 25 %

Description : A concrete structure is set on fire and the temperature raises to 1000°C. The strength of concrete as compared to original strength reduces to (A) 10 % (B) 15 % (C) 20 % (D) 25 %

Last Answer : Answer: Option C

When percentage of mica present in sand is large, it (a) Reduces the strength of mortar, or concrete (b) Increases the strength of mortar or concrete (c) Has no effect on mortar, or concrete strength (d) Enhances the strength of mortar, or concrete, but only marginally

Description : When percentage of mica present in sand is large, it (a) Reduces the strength of mortar, or concrete (b) Increases the strength of mortar or concrete (c) Has no effect on mortar, or concrete strength (d) Enhances the strength of mortar, or concrete, but only marginally

Last Answer : (c) Has no effect on mortar, or concrete strength

Pick up the correct statement from the following: (A) Acid test is done to find out the weathering quality of stones (B) Attrition test is done to find out the rate of wear of stones which are used in road construction (C) Crushing test is done to find out the compressive strength of the stone (D) All the above

Description : Pick up the correct statement from the following: (A) Acid test is done to find out the weathering quality of stones (B) Attrition test is done to find out the rate of wear of stones which are used ... (C) Crushing test is done to find out the compressive strength of the stone (D) All the above

Last Answer : Answer: Option D

The maximum amount of chlorides and sulphates should not be more than [ A ] 0.15% and 4% by mass of cement respectively [ B ] 4% and 0.15% by mass of cement respectively [ C ] 0.30% and 2% by mass of cement respectively [ D ] 2% and 0.30% by mass of cement respectively

Description : The maximum amount of chlorides and sulphates should not be more than [ A ] 0.15% and 4% by mass of cement respectively [ B ] 4% and 0.15% by mass of cement respectively [ C ] 0.30% and 2% by mass of cement respectively [ D ] 2% and 0.30% by mass of cement respectively

Last Answer : [ A ] 0.15% and 4% by mass of cement respectively

The maximum amount of chlorides and sulphates should not be more than [ A ] 0.15% and 4% by mass of cement respectively [ B ] 4% and 0.15% by mass of cement respectively [ C ] 0.30% and 2% by mass of cement respectively [ D ] 2% and 0.30% by mass of cement respectively

Description : The maximum amount of chlorides and sulphates should not be more than [ A ] 0.15% and 4% by mass of cement respectively [ B ] 4% and 0.15% by mass of cement respectively [ C ] 0.30% and 2% by mass of cement respectively [ D ] 2% and 0.30% by mass of cement respectively

Last Answer : [ A ] 0.15% and 4% by mass of cement respectively

Pick up the incorrect statement from the following. If water cement ratio is (A) Increased, strength of concrete increases (B) Decreased, strength of concrete increases(D) None of these (C) Increased, strength of concrete is not affected

Description : Pick up the incorrect statement from the following. If water cement ratio is (A) Increased, strength of concrete increases (B) Decreased, strength of concrete increases (C) Increased, strength of concrete is not affected (D) None of these

Last Answer : Answer: Option C