Description : If 50 kg of fine aggregates and 100 kg of coarse aggregates are mixed in a concrete whose water cement ratio is 0.6, the weight of water required for harsh mix, is (A) 8 kg (B) 10 kg (C) 12 kg (D) 14 kg
Last Answer : Answer: Option C
Description : For batching 1:3:6 concrete mix by volume, the ingredients required per bag of 50 kg cement, are: (A) 70 litres of sand and 120 litres of aggregates (B) 70 kg of sand and 140 litres of ... C) 105 litres of sand and 140 litres of aggregates (D) 105 litres of sand and 210 litres of aggregates
Last Answer : Answer: Option D
Description : Water required per bag of cement, is (A) 7 kg (B) 14 kg (C) 21 kg (D) 35 kg
Last Answer : (D) 35 kg
Description : Minimum number of 50 kg cement bags per cubic metre of concrete for a mix corresponding to crushing strength 280 kg/cm2 at 28 days, are (A) 5.0 (B) 6.5 (C) 7.0 (D) 7.5
Last Answer : Answer: Option B
Description : According to Water-Cement Ratio Law, the strength of workable plastic concrete (A) Depends upon the amount of water used in the mix (B) Does not depend upon the quality of cement mixed with aggregates (C) Does not depend upon the quantity of cement mixed with aggregates (D) All the above
Description : For a 50 kg cement bag water required, is (A) 16.5 litres (B) 18.5 litres (C) 20.5 litres (D) 22.5 litres
Description : Water cement ration is, usually, expressed in (a) Litres of water required per bag of cement (b) Litres of water required per kg of cement (c) Both (a) and (b) (d) None of these
Last Answer : (a) Litres of water required per bag of cement
Description : Maximum quantity of water needed per 50 kg of cement for M 15 grade of concrete is (A) 28 liters (B) 30 liters (C) 32 liters (D) 34 liters
Description : In what ratio must a person mix three kinds of dall costing him Rs 12.25,Rs 12.50 and Rs 12.75 per Kg so that the mixture may be worth Rs 12.65 per Kg? a) 11:7:1 b) 22:3:6 c) 14:3:4 d) 2:7:4 e) 3:12:32
Last Answer : E Step1: Mix dall of first and third kind to get a mixture worth Rs 12.25 per Kg. C.P of 1 Kg dall of 1st kind 1225p C.P of 1 Kg dall of 3rd kind 1275p So they must be mixed in the ... So the Mixed ratio = 3:8 Thus the quantities of dall 1st : 2nd : 3rd = 3:12:32
Description : A simply supported beam 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2 ... area of steel required, is (A) 14 cm (B) 15 cm2 (C) 16 cm2 (D) 17 cm
Description : For one bag of cement water required is (a) 10 kg (b) 30 kg (c) 35 kg (d) 39 kg
Last Answer : (c) 35 kg
Description : The ratio of differenct ingredients (cement, sand and aggregate) in concrete mix of grade M20 is. (a) 1:1:2 (b) 1:1.5:2 (c) 1:2:4 (d) 1:3:6
Last Answer : (b) 1:1.5:2
Description : Water cement ratio is generally expressed in volume of water required per (A) 10 kg (B) 20 kg (C) 30 kg (D) 50 kg
Description : The minimum quantity of cement to be used in controlled concrete is (a) 120kg/cm2 (b) 160 kg/cm2 (c) 220 kg/cm2 (d) 280 kg/cm2
Last Answer : (c) 220 kg/cm2
Description : For 100 sq. m cement concrete (1 : 2: 4) 4 cm thick floor, the quantity of cement required, is (A) 0.90 m3 (B) 0.94 m3 (C) 0.98 m3 (D) 1.00 m3
Last Answer : (B) 0.94 m3
Description : Calculate quantity of water to be added for casting cubes in laboratory by 12.5 kg cement if w/c ratio 0.45.
Last Answer : As w/c = (weight of water / weight of cement) w/c = (Ww / Wc) 0.45 = (Ww / 12.5) Ww = (0.45x12.5) Ww = 5.625 kg or 5.625 Litres
Description : Workability of concrete is inversely proportional to (A) Time of transit (B) water-cement ratio (C) The air in the mix (D) Size of aggregate
Last Answer : Answer: Option A
Description : Shrinkage in concrete can be reduced by using (A) Low water cement ratio (B) Less cement in the concrete (C) Proper concrete mix (D) All the above
Description : Workability of concrete mix with low water cement ratio is determined by (A) Tensile strength test (B) Slump test (C) Compaction factor test (D) Flexural strength test
Description : The factors which effects the design of concrete mix is (a) Fineness modulus (b) Water cement ratio (c) Slump (d) All of these
Last Answer : (d) All of these
Description : According to the rule of water cement ratio, the strength of concrete wholly depends upon. (a) The quality of cement. (b) The quality of cement mixed with aggregate. (c) The amount of water used in preparation of concrete mix. (d) All of the above
Last Answer : (c) The amount of water used in preparation of concrete mix.
Description : Workability of concrete mix with low water cement ratio is determined by [ A ] Tensile strength test [ B ] Slump cone test [ C ] Compaction factor test [ D ] Flexural strength test
Last Answer : [ C ] Compaction factor test
Description : For 12 mm thick cement plastering 1 : 6 on 100 sq.m new brick work, the quantity of cement required, is (A) 0.200 m3 (B) 0.247 m3 (C) 0.274 m3 (D) 0.295 m
Last Answer : (C) 0.274 m3
Description : If water required for 1 bag of cement is 30 litres, the water cement ratio is: (A) 0.40 (B) 0.50 (C) 0.60 (D) None of these
Description : Pick up the correct statement from the following: (A) The weight of ingredients of concrete mix, is taken in kilograms (B) Water and aggregates are measured in litres (C) 20 bags of cement make one tonne (D) All the above
Description : Pick up the correct statement from the following: (A) Bricks are paid per thousand (B) Cement is paid per 50 kg bag (C) Lime is paid per quintal (D) All the above
Last Answer : (D) All the above
Description : The specifications of a cement bag for storage, are (A) Weight 50 kg (B) Height 18 cm (C) Plan area 3000 sq. cm (D) All the above
Description : For preparing ordinary concrete, the quantity of water used, is (A) 5% by weight of aggregates plus 20% of weight of cement (B) 10% by weight of aggregates plus 10% of weight of cement (C) ... aggregates plus 30% of weight of cement (D) 30% by weight of aggregates plus 10% of weight of cement
Description : Minimum required water cement ratio for a workable concrete, is (A) 0.30 (B) 0.40 (C) 0.50 (D) 0.60
Description : Pick up the correct statement from the following: (A) For thin structures subjected to wetting and drying, the water cement ratio should be 0.45 (B) For mass concrete structures subjected to wetting and ... under water, the water-cement ratio by weight should be 0.55 (D) All the above
Description : Water cement ratio is (A) Volume of water to that of cement (B) Weight of water to that of cement (C) Weight of concrete to that of water (D) Both (a) and (b) of the above
Description : If the diameter of the main reinforcement in a slab is 16 mm, the concrete cover to main bars is (A) 10 mm (B) 12 mm (C) 14 mm (D) 16 mm
Description : Explain the importance of water/cement ratio in the concrete mix.
Last Answer : Importance of water/cement ratio in the concrete mix : i. The W/C ratio plays very vital role in concrete mixture. The improper or random selection of W/C ratio leads in ... opted out properly as mentioned above, then concrete possess good workability, compressive strength and durability ultimately.
Description : How many address bits are required to represent a 32 K memory (A) 10 bits. (B) 12 bits. (C) 14 bits. (D) 16 bits.
Last Answer : (D) 16 bits.
Description : For M 150 mix concrete, according to I.S. specifications, local bond stress, is (A) 5 kg/cm2 (B) 10 kg/cm2 (C) 15 kg/cm2 (D) 20 kg/cm
Description : The shrinkage of concrete (A) Is proportional to water content is the mix (B) Is proportional to cement concrete (C) Increases with age of concrete (D) All the above
Description : Inert material of a cement concrete mix, is (A) Water (B) Cement (C) Aggregate (D) None of these
Description : Pick up the incorrect statement from the following. While performing preliminary test on concrete (A) Proportions of the material and water should be the same as to be used at the work site (B) ... in air-tight containers (D) Concrete ingredients should be kept at a temperature of 37° 2°C
Description : Pick up the correct statement from the following: (A) An increase in water content must be accompanied by an increase in cement content (B) Angular and rough aggregates reduce the workability of the ... The slump of the concrete mix decreases due to an increase in temperature (D) All the above
Description : The basic purpose of a retarder in concrete is (A) To increase the initial setting time of cement paste in concrete (B) To decrease the initial setting time of cement paste in concrete (C) To render the concrete more water tight (D) To improve the workability of concrete mix
Description : Inert material of a cement concrete mix, is [ A ] Water [ B ] Aggregate [ C ] Cement [ D ] None of these
Last Answer : [ B ] Aggregate
Description : A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one- ... beam, the number of shear stirrups required, is (A) 30 (B) 35 (C) 40 (D) 45
Description : Pick up the correct statement from the following: (A) Insufficient quantity of water makes the concrete mix harsh (B) Insufficient quantity of water makes the concrete unworkable (C) Excess quantity of water makes the concrete segregated (D) All the above
Description : Excess quantity of water (a) Makes the concrete mix harsh (b) Makes the concrete mix unworkable (c) Causes segregation in concrete (d) Causes bleeding in concrete.
Last Answer : both c&d
Description : Insufficient quantity of water (a) Makes the concrete mix harsh (b) Makes the concrete mix unworkable (c) Causes segregation in concrete (d) Causes bleeding in concrete.
Last Answer : both a&b
Description : After casting, an ordinary cement concrete on drying (A) Expands (B) Mix (C) Shrinks (D) None of these
Last Answer : (C) Shrinks
Description : Modulus of elasticity of concrete is primarily influenced by [ A ] Elastic properties of aggregate [ B ] Curing of concrete [ C ] Age of concrete [ D ] Mix proportion and type of cement
Last Answer : [ A ] Elastic properties of aggregate
Description : High strength of concrete requires a water cement ratio of [ A ] 0.10 to 0.15 [ B ] 0.25 to 0.30 [ C ] 0.45 to 0.60 [ D ] 0.75 to 0.90
Last Answer : [ B ] 0.25 to 0.30
Description : Strength of cement concrete primarily depends upon (A) Quality of water (B) Quantity of aggregate (C) Quantity of cement (D) Water-cement
Description : Water cement ratio is (a) Weight of water to that of cement. (b) Weight of concrete to that of water. (c) Volume of concrete to that of water. (d) All the above.
Last Answer : (a) Weight of water to that of cement.