Calculate quantity of water to be added for casting cubes in laboratory by 12.5 kg cement if w/c ratio 0.45.

Calculate quantity of water to be added for casting cubes in laboratory by 12.5 kg cement if w/c ratio 0.45. 
by

1 Answer

Answer :

As w/c = (weight of water / weight of cement)

 w/c = (Ww / Wc)

 0.45 = (Ww / 12.5)

 Ww = (0.45x12.5)

 Ww = 5.625 kg or 5.625 Litres
by

Related questions

If P, Y and Z are the weights of cement, fine aggregates and coarse aggregates respectively and W/C is the water cement ratio, the minimum quantity of water to be added to first batch, is obtained by the equation (A) 0.1P + 0.3Y + 0.1Z = W/C × P (B) 0.3P + 0.1Y + 0.01Z = W/C × P (C) 0.4P + 0.2Y + 0.01Z = W/C × P (D) 0.5P + 0.3Y + 0.01Z = W/C × P

Description : If P, Y and Z are the weights of cement, fine aggregates and coarse aggregates respectively and W/C is the water cement ratio, the minimum quantity of water to be added to first batch, is obtained by the equation (A) 0.1P + 0.3Y + 0. ... + 0.2Y + 0.01Z = W/C P (D) 0.5P + 0.3Y + 0.01Z = W/C P

Last Answer : Answer: Option B

For a concrete mix 1:3:6 and water cement ratio 0.6 both by weight, the quantity of water required per bag, is (A) 10 kg (B) 12 kg (C) 14 kg (D) 16 k

Description : For a concrete mix 1:3:6 and water cement ratio 0.6 both by weight, the quantity of water required per bag, is (A) 10 kg (B) 12 kg (C) 14 kg (D) 16 kg

Last Answer : Answer: Option C

Explain the laboratory procedure to determine the compressive strength of concrete cubes as per IS-516-1959 with reference to following points: i. Preparation of test specimen ii. Procedure of testing iii. Interpretation of results

Description : Explain the laboratory procedure to determine the compressive strength of concrete cubes as per IS-516-1959 with reference to following points: i. Preparation of test specimen ii. Procedure of testing iii. Interpretation of results

Last Answer : Preparation of test specimen: i. Take three cubes of 15 cm sides and apply oil to its inner surface. ii. Prepare the concrete mixture of required grade and fill it in each mould in 3 layers. ... say 23N/mm 2) than the specified grade M20, then that concrete is safe and good for construction.

If 50 kg of fine aggregates and 100 kg of coarse aggregates are mixed in a concrete whose water cement ratio is 0.6, the weight of water required for harsh mix, is (A) 8 kg (B) 10 kg (C) 12 kg (D) 14 kg

Description : If 50 kg of fine aggregates and 100 kg of coarse aggregates are mixed in a concrete whose water cement ratio is 0.6, the weight of water required for harsh mix, is (A) 8 kg (B) 10 kg (C) 12 kg (D) 14 kg

Last Answer : Answer: Option C

Which of the following ingredient of cement when added in excess quantity, causes the cement to set slowly. (a) Lime (b) Silica (c) Alumina (d) Iron oxide

Description : Which of the following ingredient of cement when added in excess quantity, causes the cement to set slowly. (a) Lime (b) Silica (c) Alumina (d) Iron oxide

Last Answer : Lime is a common ingredient in cement. It is typically added in small amounts to help the cement set more quickly. Adding too much lime can cause the cement to set slowly. Alumina, silica, and iron oxide are also common ingredients in cement, but they do not have an effect on the setting time.

Maximum quantity of water needed per 50 kg of cement for M 15 grade of concrete is (A) 28 liters (B) 30 liters (C) 32 liters (D) 34 liters

Description : Maximum quantity of water needed per 50 kg of cement for M 15 grade of concrete is (A) 28 liters (B) 30 liters (C) 32 liters (D) 34 liters

Last Answer : Answer: Option C

Standard quantity of material per unit 5KG. Standard Price Rs 5 per KG. actual number of units 400 units. Actual quantity 2,200KG and price of material Rs 4.80 per kg. Calculate material price. a) 100(F) b) 500(A) c) 440(F) d) 600(F)

Description : Standard quantity of material per unit 5KG. Standard Price Rs 5 per KG. actual number of units 400 units. Actual quantity 2,200KG and price of material Rs 4.80 per kg. Calculate material price. a) 100(F) b) 500(A) c) 440(F) d) 600(F)

Last Answer : The standard quantity of material per unit is 5KG, so the standard quantity for 400 units would be: Standard quantity = 5KG/unit x 400 units = 2000KG The standard price per KG is Rs 5, so the ... material cost was lower than the standard material cost. Option (c) is the correct answer: 440(F).

The minimum quantity of cement to be used in controlled concrete is (a) 120kg/cm2 (b) 160 kg/cm2 (c) 220 kg/cm2 (d) 280 kg/cm2

Description : The minimum quantity of cement to be used in controlled concrete is (a) 120kg/cm2 (b) 160 kg/cm2 (c) 220 kg/cm2 (d) 280 kg/cm2

Last Answer : (c) 220 kg/cm2

In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right compensation, the trajectory of the cutter will be a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5) b.(0,-5), (55,-5), (55, 35), (-5, 35), (-5,-5) c.(5, 5), (5, 25), (45, 25), (45, 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Description : In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right ... , 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Last Answer : a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5)

What is the difference between the quantity of Guava available at vendor B and that at vendor A? 1) 90 kg 2) 45 kg 3) 85 kg 4) 80 kg 5) 60kg

Description : What is the difference between the quantity of Guava available at vendor B and that at vendor A? 1) 90 kg 2) 45 kg 3) 85 kg 4) 80 kg 5) 60kg

Last Answer : 4) 80 kg

If ‘W’ is the percentage of water required for normal consistency of cement, water to be added for determination of initial setting time is (a) 0.50 W (b) 0.62 W (c) 0.75 W (d) 0.85 W

Description : If ‘W’ is the percentage of water required for normal consistency of cement, water to be added for determination of initial setting time is (a) 0.50 W (b) 0.62 W (c) 0.75 W (d) 0.85 W

Last Answer : (d) 0.85 W

Pick up the incorrect statement from the following. For performing compressive strength test of cement (A) Cement and standard sand mortar are used in the ratio of 1 : 3 (B) Water is added at the rate of (P/4) + 3.0 percentage of water where P is the percentage of water for standard consistency (C) A cube mould of 10 cm × 10 cm × 10 cm is used (D) The prepared moulds are kept in a atmosphere of 50% relative humidity

Description : Pick up the incorrect statement from the following. For performing compressive strength test of cement (A) Cement and standard sand mortar are used in the ratio of 1 : 3 (B) Water is added at the ... cm 10 cm is used (D) The prepared moulds are kept in a atmosphere of 50% relative humidity

Last Answer : Answer: Option A

The average weight of 45 passenger on board an aircraft is 50 kg. If the weight of 5 members of the crew is added, the average is reduced by half kilogram . What is the average weight of the crew members?

Description : The average weight of 45 passenger on board an aircraft is 50 kg. If the weight of 5 members of the crew is added, the average is reduced by half kilogram . What is the average weight of the crew members?

Last Answer : Total weight of 45 passenger = 45 x 50 = 2250 kg Total weight of 45 passenger and 5 crews = 50 x 49.5 = 2475 kg Total weight of 5 crews = 2475-2250 = 225kg Average weight of 5 crews = 225/5 = 45kg.

A shopkeeper bought 30 kg of wheat at the rate of Rs 45 per Kg. He sold 40% of the total quantity at the rate of Rs 50 per Kg. Approximately, at what price per Kg should he sell the remaining quantity to make 25 per cent overall profit? 1. Rs 54 2. Rs 52 3. Rs 50 4. Rs 60

Description : A shopkeeper bought 30 kg of wheat at the rate of Rs 45 per Kg. He sold 40% of the total quantity at the rate of Rs 50 per Kg. Approximately, at what price per Kg should he sell the remaining quantity to make 25 per cent overall profit? 1. Rs 54 2. Rs 52 3. Rs 50 4. Rs 60

Last Answer : 4. Rs 60

Pick up the correct statement from the following: (A) For thin structures subjected to wetting and drying, the water cement ratio should be 0.45 (B) For mass concrete structures subjected to wetting and drying, the water ratio should be 0.55 (C) For thin structures which remain continuously under water, the water-cement ratio by weight should be 0.55 (D) All the above

Description : Pick up the correct statement from the following: (A) For thin structures subjected to wetting and drying, the water cement ratio should be 0.45 (B) For mass concrete structures subjected to wetting and ... under water, the water-cement ratio by weight should be 0.55 (D) All the above

Last Answer : Answer: Option D

In case of honey –comb structure, the water-cement ratio is (a) More than 0.35 (b) Less than 0.35 (c) More than 0.45 (d) Less than 0.45

Description : In case of honey –comb structure, the water-cement ratio is (a) More than 0.35 (b) Less than 0.35 (c) More than 0.45 (d) Less than 0.45

Last Answer : (b) Less than 0.35

The minimum water-cement ratio is (a) 0.35 (b) 0.45 (c) 0.50 (d) None of these

Description : The minimum water-cement ratio is (a) 0.35 (b) 0.45 (c) 0.50 (d) None of these

Last Answer : (a) 0.35

According to IS: 456, maximum water-cement ratio should be [ A ] 0.45 [ B ] 0.55 [ C ] 0.65 [ D ] 0.75

Description : According to IS: 456, maximum water-cement ratio should be [ A ] 0.45 [ B ] 0.55 [ C ] 0.65 [ D ] 0.75

Last Answer : [ B ] 0.55

According to IS: 456, maximum water-cement ratio should be [ A ] 0.45 [ B ] 0.55 [ C ] 0.65 [ D ] 0.75

Description : According to IS: 456, maximum water-cement ratio should be [ A ] 0.45 [ B ] 0.55 [ C ] 0.65 [ D ] 0.75

Last Answer : [ B ] 0.55

High strength of concrete requires a water cement ratio of [ A ] 0.10 to 0.15 [ B ] 0.25 to 0.30 [ C ] 0.45 to 0.60 [ D ] 0.75 to 0.90

Description : High strength of concrete requires a water cement ratio of [ A ] 0.10 to 0.15 [ B ] 0.25 to 0.30 [ C ] 0.45 to 0.60 [ D ] 0.75 to 0.90

Last Answer : [ B ] 0.25 to 0.30

For 12 mm thick cement plastering 1 : 6 on 100 sq.m new brick work, the quantity of cement required, is (A) 0.200 m3 (B) 0.247 m3 (C) 0.274 m3 (D) 0.295 m

Description : For 12 mm thick cement plastering 1 : 6 on 100 sq.m new brick work, the quantity of cement required, is (A) 0.200 m3 (B) 0.247 m3 (C) 0.274 m3 (D) 0.295 m

Last Answer : (C) 0.274 m3

Ice cubes are added to a glass of pure water and a glass of pure alcohol. The ice would be – (1) at a higher level in water (2) at a higher level in alcohol (3) at the same level in both (4) floating in alcohol and sinking in water

Description : Ice cubes are added to a glass of pure water and a glass of pure alcohol. The ice would be – (1) at a higher level in water (2) at a higher level in alcohol (3) at the same level in both (4) floating in alcohol and sinking in water

Last Answer : (1) at a higher level in water Explanation: Density of water is approx 1 g/ml; Density of Ice is approx 0.93g/ml; and Density of 100% pure ethanol is 0.79g/ml. So the density of ice cubes is lesser than water, but higher than alcohol. So it will float in water, but sink in alcohol.

Ice cubes are added to a glass of pure water and a glass of pure alcohol. The ice would be (1) at a higher level in water (2) at a higher level in alcohol (3) at the same level in both (4) floating in alcohol and sinking in water

Description : Ice cubes are added to a glass of pure water and a glass of pure alcohol. The ice would be (1) at a higher level in water (2) at a higher level in alcohol (3) at the same level in both (4) floating in alcohol and sinking in water

Last Answer : at a higher level in water

A 4 cm cube is cut into 1 cm cubes. Calculate the total surface area of all the small cubes. -Maths 9th

Description : A 4 cm cube is cut into 1 cm cubes. Calculate the total surface area of all the small cubes. -Maths 9th

Last Answer : Side of cube = 4 cm But cutting into 1 cm cubes, we get = 4 x 4 x 4 = 64 Now surface area of one cube = 6 x (1)² = 6 x 1=6 cm² and surface area of 64 cubes = 6 x 64 cm² = 384 cm²

After casting, an ordinary cement concrete on drying (A) Expands (B) Mix (C) Shrinks (D) None of these

Description : After casting, an ordinary cement concrete on drying (A) Expands (B) Mix (C) Shrinks (D) None of these

Last Answer : (C) Shrinks

To make a solution for filling radiator one bag of washing soda and 0.5 kg of kerosene oil should be added in water amounting a) 6 kg b) 8 k8 c ) 10 kg d) 12 kg

Description : To make a solution for filling radiator one bag of washing soda and 0.5 kg of kerosene oil should be added in water amounting a) 6 kg b) 8 k8 c ) 10 kg d) 12 kg

Last Answer : c ) 10 kg

Four solid cubes of different metals, each one having a mass of one kg are weighed in water select the correct statement: (a) all cubes weigh equal (b) cube with minimum density weighs minimum (c) cube with minimum density weighs maximum (d) the mass of all cubes will be the same

Description : Four solid cubes of different metals, each one having a mass of one kg are weighed in water select the correct statement: (a) all cubes weigh equal (b) cube with minimum density weighs minimum (c) cube with minimum density weighs maximum (d) the mass of all cubes will be the same

Last Answer : Ans:(b)

Calculate the power output in horsepower of an 80-kg man that climbs a flight of stairs 3.8 m high in 4.0 s.  a) 744.8 hp  b) 0.998 hp  c) 746 hp  d) 1.998 hp Formula: Power = Fd/t = mgh/t F = W = mg d = h

Description : Calculate the power output in horsepower of an 80-kg man that climbs a flight of stairs 3.8 m high in 4.0 s.  a) 744.8 hp  b) 0.998 hp  c) 746 hp  d) 1.998 hp Formula: Power = Fd/t = mgh/t F = W = mg d = h

Last Answer : 0.998 hp

According to Water-Cement Ratio Law, the strength of workable plastic concrete (A) Depends upon the amount of water used in the mix (B) Does not depend upon the quality of cement mixed with aggregates (C) Does not depend upon the quantity of cement mixed with aggregates (D) All the above

Description : According to Water-Cement Ratio Law, the strength of workable plastic concrete (A) Depends upon the amount of water used in the mix (B) Does not depend upon the quality of cement mixed with aggregates (C) Does not depend upon the quantity of cement mixed with aggregates (D) All the above

Last Answer : Answer: Option D

Maintain 850 OC for 1 hour (soaking time).  Cool the material to 60 OC in 4 hours. a) Calculate the efficiency of the furnace, if the specific heat of steel is 0.12 kcal/kgOC and fuel oil consumption per batch is 1400 litres.  GCV of fuel oil - 10200 kcal/kg,  Cost of fuel oil - Rs. 46,000/kL,  Sp. gr. of fuel oil - 0.92. b) Due to high cost of oil, the plant management decides to convert to a lower operating cost LPG fired furnace lined on the inside with ceramic fibre insulation and with an operating efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50 lakhs. Calculate the Return on Investment, if the plant operates two batches per day and 250 days in a year.  Cost of LPG - Rs. 75/kg,  GCV of LPG - 12500 kcal/kg.

Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The  heat treatment cycle is as follows;  Increase temperature from 30 OC to 850 OC in 3 hours.  ... efficiency of 80%, for same requirement. The investment towards installation of  the new furnace is Rs. 50

Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30)   = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8

A crate weighing 40 kg rests on a cart moving with an acceleration W. The coefficient of friction between the cart and the crate is a.2.45 m/sec2 b.4.00 m/sec2 c.0.25 m/sec2 d.4.16 m/sec2 e.1.25 m/sec2

Description : A crate weighing 40 kg rests on a cart moving with an acceleration W. The coefficient of friction between the cart and the crate is a.2.45 m/sec2 b.4.00 m/sec2 c.0.25 m/sec2 d.4.16 m/sec2 e.1.25 m/sec2

Last Answer : a. 2.45 m/sec2

From a vessel containing 100 litres of ****,10 litres are drawn out and an equal amount of water is added. From the mixture,10 litres is again drawn out and same quantity of water is added. What is the final ratio of **** and water? a) 91 : 9 b) 81 : 19 c) 80 : 20 d) 90 : 10 e) None of these

Description : From a vessel containing 100 litres of wine,10 litres are drawn out and an equal amount of water is added. From the mixture,10 litres is again drawn out and same quantity of water is added. What is the final ratio of wine and water? a) 91 : 9 b) 81 : 19 c) 80 : 20 d) 90 : 10 e) None of these

Last Answer : Quantity of wine after two replacements = 100 l × (90/100)2 =81 l Required ratio = 81 : ( 100 – 81 )= 81 : 19 Answer: b)

In 20 litres of a mixture, the ratio of sugar syrub to honey syrub is 5:1. In order to make the ratio of sugar syrub to honey syrub as 3:1, the quantity of honey syrub that should be added to the mixture will be A) 5 2/3 B) 4 1/3 C) 6 2/3 D) 2 2/9

Description : In 20 litres of a mixture, the ratio of sugar syrub to honey syrub is 5:1. In order to make the ratio of sugar syrub to honey syrub as 3:1, the quantity of honey syrub that should be added to the mixture will be A) 5 2/3 B) 4 1/3 C) 6 2/3 D) 2 2/9

Last Answer : D By the rule of alligation Quantity of honey : Quantity of mixture =1/12:3/4}=1:9 Given that quantity of mixture = 20 litre =>Quantity of honey : 20 = 1 : 9 => Quantity of honey = 20 x1/9  = 2 2/9 litre

Explain the procedure for determination of compressive strength of cement in laboratory.

Description : Explain the procedure for determination of compressive strength of cement in laboratory.

Last Answer : Procedure for determination of compressive strength of cement in laboratory: 1. Take 200 gm cement, 600 gm standard sand and add water ((p/4)+3) % to that of combined weight of cement and sand. ... area of cube in mm2 . 9. Calculate average compressive strength of three test cubes in N/mm2 . 

In a solution of 45 litres of milk and water, ` 40%` is water. How many litres of milk must be added to become the ratio of milk and water ` 5 : 3` ?

Description : In a solution of 45 litres of milk and water, ` 40%` is water. How many litres of milk must be added to become the ratio of milk and water ` 5 : 3` ?

Last Answer : In a solution of 45 litres of milk and water, ` 40%` is water. How many litres of milk must be added to become the ... : 3` ? A. 8 B. 3 C. 7 D. 6

Two quantities of 5 and 12 unit when added gives a quantity 13 unit. This quantity is 

Description : Two quantities of 5 and 12 unit when added gives a quantity 13 unit. This quantity is 

Last Answer : Two quantities of 5 and 12 unit when added gives a quantity 13 unit. This quantity is (A) time (B) mass (C) linear momentum (D) speed

Water cement ratio is generally expressed in volume of water required per (A) 10 kg (B) 20 kg (C) 30 kg (D) 50 kg

Description : Water cement ratio is generally expressed in volume of water required per (A) 10 kg (B) 20 kg (C) 30 kg (D) 50 kg

Last Answer : Answer: Option D

A 45-year-old solicitor had an onset of severe, crushing, substernal chest pain while attending a football match. He collapsed on his way to the car. Bystander Cardiorespiratory Resuscitation was begun immediately and continued until arrival in Casualty where an endotracheal tube was inserted and ventilation was maintained on 100% oxygen. Investigations revealed: pH 7.13 PaO2 560 mmHg PaCO2 18 mmHg Bicarbonate 5.8 SaO2 98% Based on these laboratory values, which of the following statements best describes his current pathophysiology? 1) He is demonstrating a primary respiratory alkalosis 2) He probably developed a large right to left intracardiac shunt 3) His anion gap is probably normal 4) His oxyhemoglobin curve is shifted to the left 5) His pulmonary artery pressure is probably elevated

Description : A 45-year-old solicitor had an onset of severe, crushing, substernal chest pain while attending a football match. He collapsed on his way to the car. Bystander Cardiorespiratory Resuscitation ... His oxyhemoglobin curve is shifted to the left 5) His pulmonary artery pressure is probably elevated

Last Answer : Answers-5 This young patient with severe central chest pain has probably arrested due to myocardial infarction and arrhythmia. His gases reveal high PO2 following 100% O2 but severe acidosis ... no left to right shunting and high pulmonary pressures would be expected after this arrest scenario.

Where the complaint alleges a defect in the goods which cannot be determined without proper analysis or test of the goods, the sample of goods forwarded to appropriate laboratory for laboratory test. Such types of case finding report within ______days a) 30 b) 40 c) 45 d) 60

Description : Where the complaint alleges a defect in the goods which cannot be determined  without proper analysis or test of the goods, the sample of goods forwarded to  appropriate laboratory for laboratory test. Such types of case finding report within  ______days a) 30 b) 40 c) 45 d) 60

Last Answer : c) 45 

The maximum rimpull in the first gear of a tractor while towing a load is 6300 kg. The tractor weighs 12.5 tonnes and is operating along a 2 percent upgrade and the rolling resistance is 45 kg/tonne. Pull available for towing the load is (A) 3425 kg (B) 5515 kg (C) 4350 kg (D) 2975 kg

Description : The maximum rimpull in the first gear of a tractor while towing a load is 6300 kg. The tractor weighs 12.5 tonnes and is operating along a 2 percent upgrade and the rolling resistance is 45 kg/tonne. Pull available for towing the load is (A) 3425 kg (B) 5515 kg (C) 4350 kg (D) 2975 kg

Last Answer : (B) 5515 kg

For determining the compressive strength test on cement is, the percentage amount of water to be added as (Pa = Percentage of water for required consistency) [ A ] 0.25 Pa + 2.5 [ B ] 0.25 Pa + 3.5 [ C ] 0.35 Pa + 2.5 [ D ] 0.35 Pa + 3.5

Description : For determining the compressive strength test on cement is, the percentage amount of water to be added as (Pa = Percentage of water for required consistency) [ A ] 0.25 Pa + 2.5 [ B ] 0.25 Pa + 3.5 [ C ] 0.35 Pa + 2.5 [ D ] 0.35 Pa + 3.5

Last Answer : [ B ] 0.25 Pa + 3.5

60 kg of an alloy A is mixed with 100 kg of alloy B. If alloy A has lead and tin in the ratio of 3 : 2 and alloy B has tin and copper in the ratio of I : 4 the amount of tin in the new alloy is a) 36 kg b) 44 kg c) 80 kg d) 53 kg e) 45 kg

Description : 60 kg of an alloy A is mixed with 100 kg of alloy B. If alloy A has lead and tin in the ratio of 3 : 2 and alloy B has tin and copper in the ratio of I : 4 the amount of tin in the new alloy is a) 36 kg b) 44 kg c) 80 kg d) 53 kg e) 45 kg

Last Answer : b) 44 kg

In what ratio must a person mix three kinds of Oats costing him Rs 1.20,Rs 1.44 and Rs 1.74 per Kg so that the mixture may be worth Rs 1.41 per Kg? A)11:77:7 B) 11:45:7 C)25:45:8 D) 27:23:6

Description : In what ratio must a person mix three kinds of Oats costing him Rs 1.20,Rs 1.44 and Rs 1.74 per Kg so that the mixture may be worth Rs 1.41 per Kg? A)11:77:7 B) 11:45:7 C)25:45:8 D) 27:23:6

Last Answer : A)11:77:7

How many 12 inch cubes fit into a rectangular prism that measures 4 inches long 5 inches wide and 612 inches high?

Description : How many 12 inch cubes fit into a rectangular prism that measures 4 inches long 5 inches wide and 612 inches high?

Last Answer : 85. 12 x 12 = 144 4 x 5 x 612 = 12240 12240 ÷ 144 = 85

Helium ( R= 0.4698 BTU/lbm-˚R ) is compressed isothermally from 14.7 psia and 68 ˚F. The compression ratio is 1:4. Calculate the work done by the gas.  A. –1454 BTU/lbm  B. -364 BTU/lbm  C.-187BTU/lbm  D.46.7 BTU/lbm Formula: W = RT ln (V2/V1)

Description : Helium ( R= 0.4698 BTU/lbm-˚R ) is compressed isothermally from 14.7 psia and 68 ˚F. The compression ratio is 1:4. Calculate the work done by the gas.  A. –1454 BTU/lbm  B. -364 BTU/lbm  C.-187BTU/lbm  D.46.7 BTU/lbm Formula: W = RT ln (V2/V1)

Last Answer : -364 BTU/lbm

In India, which one of the following should be considered the right combination of the age in days and live body weight in kg for a lamb for its weaning ? (A) 20 days to 30 days and 6 kg to 7 kg (B) 45 days to 60 days and 8 kg to 10 kg (C) 105 days to 120 days and 18 kg to 21 kg (D) 75 days to 90 days and 12 kg to 15 kg (E) 55 days to 70 days and 9 kg to 11 kg

Description : In India, which one of the following should be considered the right combination of the age in days and live body weight in kg for a lamb for its weaning ? (A) 20 days to 30 days and 6 kg to 7 kg (B) 45 days to 60 ... (D) 75 days to 90 days and 12 kg to 15 kg (E) 55 days to 70 days and 9 kg to 11 kg

Last Answer : (C) 105 days to 120 days and 18 kg to 21 kg

Seed rate of lentil crop is —kg/ha a. 12 to 15 b. 20 to 25 c. 30 to 40 d. 45 to 50

Description : Seed rate of lentil crop is —kg/ha a. 12 to 15 b. 20 to 25 c. 30 to 40 d. 45 to 50

Last Answer : c. 30 to 40

A 8 metre long simply supported rectangular beam which carries a distributed load 45 kg/m. experiences a maximum fibre stress 160 kg/cm2 . If the moment of inertia of the beam is 640 cm4 , the overall depth of the beam is (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Description : A 8 metre long simply supported rectangular beam which carries a distributed load 45 kg/m. experiences a maximum fibre stress 160 kg/cm2 . If the moment of inertia of the beam is 640 cm4 , the overall depth of the beam is (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Last Answer : (A) 10 cm

Gas is enclosed in a cylinder with a weighted piston as the stop boundary. The gas is heated and expands from a volume of 0.04 m^3 to 0.10 m^3 at a constant pressure of 200kPa.Calculate the work done by the system.  A. 8 kJ  B. 10 kJ  C.12 kJ  D.14 kJ Formula: W = p(V2-V1)

Description : Gas is enclosed in a cylinder with a weighted piston as the stop boundary. The gas is heated and expands from a volume of 0.04 m^3 to 0.10 m^3 at a constant pressure of 200kPa.Calculate the work done by the system.  A. 8 kJ  B. 10 kJ  C.12 kJ  D.14 kJ Formula: W = p(V2-V1)

Last Answer : 12 kJ