For preparing ordinary concrete, the quantity of water used, is (A) 5% by weight of aggregates plus 20% of weight of cement (B) 10% by weight of aggregates plus 10% of weight of cement (C) 5% by weight of aggregates plus 30% of weight of cement (D) 30% by weight of aggregates plus 10% of weight of cement

For preparing ordinary concrete, the quantity of water used, is
(A) 5% by weight of aggregates plus 20% of weight of cement
(B) 10% by weight of aggregates plus 10% of weight of cement
(C) 5% by weight of aggregates plus 30% of weight of cement
(D) 30% by weight of aggregates plus 10% of weight of cement
by

1 Answer

Answer :

Answer: Option C
by

Related questions

In the method of voids for determination of the quantity of cement paste, it is assumed that (A) Voids in coarse aggregates are filled by fine aggregates (B) Voids in fine aggregates are filled by the cement paste (C) Volume of fine aggregates is equal to total voids in coarse aggregates plus 10% extra (D) All the above

Description : In the method of voids for determination of the quantity of cement paste, it is assumed that (A) Voids in coarse aggregates are filled by fine aggregates (B) Voids in fine aggregates are filled by ... of fine aggregates is equal to total voids in coarse aggregates plus 10% extra (D) All the above

Last Answer : Answer: Option D

The maximum amount of dust which may be permitted in aggregates is (A) 5% of the total aggregates for low workability with a coarse grading (B) 10% of the total aggregates for low workability with a fine grading (C) 20% of the total aggregates for a mix having high workability with fine grading (D) All the above

Description : The maximum amount of dust which may be permitted in aggregates is (A) 5% of the total aggregates for low workability with a coarse grading (B) 10% of the total aggregates for low workability with ... of the total aggregates for a mix having high workability with fine grading (D) All the above

Last Answer : Answer: Option D

The percentage of water for normal consistency, is (A) 5% to 15% (B) 10% to 25% (C) 15% to 25% (D) 20% to 30%

Description : The percentage of water for normal consistency, is (A) 5% to 15% (B) 10% to 25% (C) 15% to 25% (D) 20% to 30%

Last Answer : Answer: Option C

In fineness test on cement, residue left on I.S. sieve no.9 shall not exceed __________ by weight of the sample of cement [ A ] 5% [ B ] 10% [ C ] 15% [ D ] 20%

Description : In fineness test on cement, residue left on I.S. sieve no.9 shall not exceed __________ by weight of the sample of cement [ A ] 5% [ B ] 10% [ C ] 15% [ D ] 20%

Last Answer : [ B ] 10%

Proteins have the SDA: (A) 5% (B) 10% (C) 20% (D) 30%

Description : Proteins have the SDA: (A) 5% (B) 10% (C) 20% (D) 30%

Last Answer : Answer : D

According to Water-Cement Ratio Law, the strength of workable plastic concrete (A) Depends upon the amount of water used in the mix (B) Does not depend upon the quality of cement mixed with aggregates (C) Does not depend upon the quantity of cement mixed with aggregates (D) All the above

Description : According to Water-Cement Ratio Law, the strength of workable plastic concrete (A) Depends upon the amount of water used in the mix (B) Does not depend upon the quality of cement mixed with aggregates (C) Does not depend upon the quantity of cement mixed with aggregates (D) All the above

Last Answer : Answer: Option D

The strength of concrete using air entraining cement gets reduced by (a) 5 to 10% (b) 10 to 15% (c) 15 to 20% (d) 20 to 25%

Description : The strength of concrete using air entraining cement gets reduced by (a) 5 to 10% (b) 10 to 15% (c) 15 to 20% (d) 20 to 25%

Last Answer : (b) 10 to 15%

For preparing a test-specimen, it is necessary (A) To mix cement and fine aggregate by dry hand (B) To mix coarse aggregates (C) To mix water to the cement, fine aggregates and coarse aggregates (D) All the above

Description : For preparing a test-specimen, it is necessary (A) To mix cement and fine aggregate by dry hand (B) To mix coarse aggregates (C) To mix water to the cement, fine aggregates and coarse aggregates (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The weight of ingredients of concrete mix, is taken in kilograms (B) Water and aggregates are measured in litres (C) 20 bags of cement make one tonne (D) All the above

Description : Pick up the correct statement from the following: (A) The weight of ingredients of concrete mix, is taken in kilograms (B) Water and aggregates are measured in litres (C) 20 bags of cement make one tonne (D) All the above

Last Answer : Answer: Option D

If 50 kg of fine aggregates and 100 kg of coarse aggregates are mixed in a concrete whose water cement ratio is 0.6, the weight of water required for harsh mix, is (A) 8 kg (B) 10 kg (C) 12 kg (D) 14 kg

Description : If 50 kg of fine aggregates and 100 kg of coarse aggregates are mixed in a concrete whose water cement ratio is 0.6, the weight of water required for harsh mix, is (A) 8 kg (B) 10 kg (C) 12 kg (D) 14 kg

Last Answer : Answer: Option C

A good brick earth should contain: (A) About 20% to 30% of alumina (B) About 50% to 60% of silica (C) Not more than 5% of lime (D) All the above

Description : A good brick earth should contain: (A) About 20% to 30% of alumina (B) About 50% to 60% of silica (C) Not more than 5% of lime (D) All the above

Last Answer : Answer: Option D

Batching error means inaccuracy in the quantity of (A) Aggregates (B) Cement (C) Water (D) All the above

Description : Batching error means inaccuracy in the quantity of (A) Aggregates (B) Cement (C) Water (D) All the above

Last Answer : Option D

If P, Y and Z are the weights of cement, fine aggregates and coarse aggregates respectively and W/C is the water cement ratio, the minimum quantity of water to be added to first batch, is obtained by the equation (A) 0.1P + 0.3Y + 0.1Z = W/C × P (B) 0.3P + 0.1Y + 0.01Z = W/C × P (C) 0.4P + 0.2Y + 0.01Z = W/C × P (D) 0.5P + 0.3Y + 0.01Z = W/C × P

Description : If P, Y and Z are the weights of cement, fine aggregates and coarse aggregates respectively and W/C is the water cement ratio, the minimum quantity of water to be added to first batch, is obtained by the equation (A) 0.1P + 0.3Y + 0. ... + 0.2Y + 0.01Z = W/C P (D) 0.5P + 0.3Y + 0.01Z = W/C P

Last Answer : Answer: Option B

A concrete mass containing 5% of voids [ A ] Increases its strength by 30% [ B ] Reduces its strength by 30% [ C ] Increases its strength by 5% [ D ] Reduces its strength by 5%

Description : A concrete mass containing 5% of voids [ A ] Increases its strength by 30% [ B ] Reduces its strength by 30% [ C ] Increases its strength by 5% [ D ] Reduces its strength by 5%

Last Answer : [ B ] Reduces its strength by 30%

While designing an air entrained concrete (A) Water cement ratio is reduced (B) Proportion of aggregates is reduced (C) An allowance for the entrained air is made (D) All the above

Description : While designing an air entrained concrete (A) Water cement ratio is reduced (B) Proportion of aggregates is reduced (C) An allowance for the entrained air is made (D) All the above

Last Answer : (D) All the above

For a good concrete (A) Aggregates should be hard and durable (B) Water should be free from organic materials (C) Cement should be sufficient to produce the required strength (D) All the above

Description : For a good concrete (A) Aggregates should be hard and durable (B) Water should be free from organic materials (C) Cement should be sufficient to produce the required strength (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) An increase in water content must be accompanied by an increase in cement content (B) Angular and rough aggregates reduce the workability of the concrete (C) The slump of the concrete mix decreases due to an increase in temperature (D) All the above

Description : Pick up the correct statement from the following: (A) An increase in water content must be accompanied by an increase in cement content (B) Angular and rough aggregates reduce the workability of the ... The slump of the concrete mix decreases due to an increase in temperature (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Water cement paste hardens due to hydration (B) During hardening cement binds the aggregates together (C) Cement provides strength, durability and water tightness to the concrete (D) All the above

Description : Pick up the correct statement from the following: (A) Water cement paste hardens due to hydration (B) During hardening cement binds the aggregates together (C) Cement provides strength, durability and water tightness to the concrete (D) All the above

Last Answer : Answer: Option D

Concrete mainly consists of (A) Cement (B) Aggregates (C) Water (D) All the above

Description : Concrete mainly consists of (A) Cement (B) Aggregates (C) Water (D) All the above

Last Answer : Answer: Option D

Concrete gains strength due to (A) Chemical reaction of cement with sand and coarse aggregates (B) Evaporation of water from concrete (C) Hydration of cement (D) All the above

Description : Concrete gains strength due to (A) Chemical reaction of cement with sand and coarse aggregates (B) Evaporation of water from concrete (C) Hydration of cement (D) All the above

Last Answer : Answer: Option C

The inert mineral material used for the manufacture of mortars and concrete is (a) Cement (b) Water (c) Aggregates (d) Admixture

Description : The inert mineral material used for the manufacture of mortars and concrete is (a) Cement (b) Water (c) Aggregates (d) Admixture

Last Answer : (c) Aggregates

Concrete gains strength due to [ A ] Chemical reaction of cement with sand and coarse aggregates [ B ] Evaporation of water from concrete [ C ] Hydration of cement [ D ] All the above

Description : Concrete gains strength due to [ A ] Chemical reaction of cement with sand and coarse aggregates [ B ] Evaporation of water from concrete [ C ] Hydration of cement [ D ] All the above

Last Answer : [ C ] Hydration of cement

Shrinkage in concrete can be reduced by using (i) Low water cement ratio (ii) More amount of cement in the concrete (iii) Presaturated aggregates [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Description : Shrinkage in concrete can be reduced by using (i) Low water cement ratio (ii) More amount of cement in the concrete (iii) Presaturated aggregates [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Last Answer : [ C ] i and iii

Pick up the correct statement from the following: (A) The quality of water governs the strength of concrete (B) 10% excess of water reduces the strength of concrete by 15% (C) 30% excess of water reduces the strength of concrete by 50% (D) All the above

Description : Pick up the correct statement from the following: (A) The quality of water governs the strength of concrete (B) 10% excess of water reduces the strength of concrete by 15% (C) 30% excess of water reduces the strength of concrete by 50% (D) All the above

Last Answer : Answer: Option D

An excess of flaky particles in concrete aggregates (A) Decreases the workability (B) Increases the quantity of water and sand (C) More than 15% are not desirable (D) All the above

Description : An excess of flaky particles in concrete aggregates (A) Decreases the workability (B) Increases the quantity of water and sand (C) More than 15% are not desirable (D) All the above

Last Answer : Answer: Option D

Normally, the tensile strength of concrete is about____________of its compressive strength (a) 10 to 15% (b) 15 to 20% (c) 20 to 25% (d) 25 to 30%

Description : Normally, the tensile strength of concrete is about____________of its compressive strength (a) 10 to 15% (b) 15 to 20% (c) 20 to 25% (d) 25 to 30%

Last Answer : (a) 10 to 15%

The removal of excess air after placing concrete helps in increasing the strength of concrete by (a) 15 to 20% (b) 20 to 30% (c) 30 to 50% (d) 50 to 70%

Description : The removal of excess air after placing concrete helps in increasing the strength of concrete by (a) 15 to 20% (b) 20 to 30% (c) 30 to 50% (d) 50 to 70%

Last Answer : (a) 15 to 20%

When each particle of aggregates is thinly coated with cement paste, a heterogeneous solid is formed, which is known as (A) Hydration (B) Gel (C) Concrete (D) None of these

Description : When each particle of aggregates is thinly coated with cement paste, a heterogeneous solid is formed, which is known as (A) Hydration (B) Gel (C) Concrete (D) None of these

Last Answer : Answer: Option C

The ratio of various ingredients (cement, sand, aggregates) in concrete of grade M 200, is (A) 1 : 2 : 4 (B) 1 : 3 : 6 (C) 1 : 1½ : 3 (D) 1 : 1 : 2

Description : The ratio of various ingredients (cement, sand, aggregates) in concrete of grade M 200, is (A) 1 : 2 : 4 (B) 1 : 3 : 6 (C) 1 : 1½ : 3 (D) 1 : 1 : 2

Last Answer : (C) 1 : 1½ : 3

For batching 1:3:6 concrete mix by volume, the ingredients required per bag of 50 kg cement, are: (A) 70 litres of sand and 120 litres of aggregates (B) 70 kg of sand and 140 litres of aggregates (C) 105 litres of sand and 140 litres of aggregates (D) 105 litres of sand and 210 litres of aggregates

Description : For batching 1:3:6 concrete mix by volume, the ingredients required per bag of 50 kg cement, are: (A) 70 litres of sand and 120 litres of aggregates (B) 70 kg of sand and 140 litres of ... C) 105 litres of sand and 140 litres of aggregates (D) 105 litres of sand and 210 litres of aggregates

Last Answer : Answer: Option D

For the construction of cement concrete dams, the maximum permissible size of the aggregates, is (A) 40 mm (B) 50 mm (C) 60 mm (D) 70 mm

Description : For the construction of cement concrete dams, the maximum permissible size of the aggregates, is (A) 40 mm (B) 50 mm (C) 60 mm (D) 70 mm

Last Answer : Answer: Option A

If the various concrete ingredients i.e. cement, sand and aggregates are in the ratio of 1:3:6, the grade of concrete, is (A) M 100 (B) M 150 (C) M 200 (D) M 250

Description : If the various concrete ingredients i.e. cement, sand and aggregates are in the ratio of 1:3:6, the grade of concrete, is (A) M 100 (B) M 150 (C) M 200 (D) M 250

Last Answer : Answer: Option A

Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C) Curing of concrete is done for proper compaction of cement (D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Description : Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C ... D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Last Answer : Option D

The tensile strength of concrete is about ________ of its compressive strength [ A ] 10% to 15% [ B ] 30% to 40% [ C ] 50% [ D ] 60% to 75%

Description : The tensile strength of concrete is about ________ of its compressive strength [ A ] 10% to 15% [ B ] 30% to 40% [ C ] 50% [ D ] 60% to 75%

Last Answer : [ A ] 10% to 15%

Specific dynamic action of proteins is about (A) 5% (B) 13% (C) 20% (D) 30%

Description : Specific dynamic action of proteins is about (A) 5% (B) 13% (C) 20% (D) 30%

Last Answer : Answer : D

Specific dynamic action of carbohydrates is about (A) 5% (B) 13% (C) 20% (D) 30%

Description : Specific dynamic action of carbohydrates is about (A) 5% (B) 13% (C) 20% (D) 30%

Last Answer : Answer : A

Cement paints usually (A) Contain hydrated lime (B) Contain 5% to 10% colour pigments (C) Contain 5% sodium chloride (D) All the above

Description : Cement paints usually (A) Contain hydrated lime (B) Contain 5% to 10% colour pigments (C) Contain 5% sodium chloride (D) All the above

Last Answer : Answer: Option D

For an ordinary Portland cement (A) Residual does not exceed 10% when sieved through IS Sieve No. 9 (B) Soundness varies from 5 to 10 mm (C) Initial setting time is not less than 30 minutes (D) Compressive stress after 7 days, is not less than 175 kg/cm2

Description : For an ordinary Portland cement (A) Residual does not exceed 10% when sieved through IS Sieve No. 9 (B) Soundness varies from 5 to 10 mm (C) Initial setting time is not less than 30 minutes (D) Compressive stress after 7 days, is not less than 175 kg/cm2

Last Answer : (C) Initial setting time is not less than 30 minutes

According to IS Code , the requirement of an ordinary Portland cement is (a) The residue does not exceed 10% when sieved through is sieve no .9 (b) Its initial setting time is not less than 30 minutes. (c) its expansion is not morethan 10mm for unaerated cement (d) All the above.

Description : According to IS Code , the requirement of an ordinary Portland cement is (a) The residue does not exceed 10% when sieved through is sieve no .9 (b) Its initial setting time is not less than 30 minutes. (c) its expansion is not morethan 10mm for unaerated cement (d) All the above.

Last Answer : (d) All the above.

For the manufacture of Portland cement, the proportions of raw materials used, are (A) Lime 63% ; silica 22% ; other ingredients 15% (B) Lime 22% ; silica 63% ; other ingredients 15% (C) Silica 40% ; lime 40% ; other ingredients 20% (D) Silica 70% ; lime 20% ; other ingredients 10%

Description : For the manufacture of Portland cement, the proportions of raw materials used, are (A) Lime 63% ; silica 22% ; other ingredients 15% (B) Lime 22% ; silica 63% ; other ingredients 15% (C) Silica 40% ; lime 40% ; other ingredients 20% (D) Silica 70% ; lime 20% ; other ingredients 10%

Last Answer : Answer: Option A

For a concrete mix 1:3:6 and water cement ratio 0.6 both by weight, the quantity of water required per bag, is (A) 10 kg (B) 12 kg (C) 14 kg (D) 16 k

Description : For a concrete mix 1:3:6 and water cement ratio 0.6 both by weight, the quantity of water required per bag, is (A) 10 kg (B) 12 kg (C) 14 kg (D) 16 kg

Last Answer : Answer: Option C

IN a DNA molecule, the guanosine content is 40%, the adenine content will be (A) 10% (B) 20% (C) 30% (D) 40%

Description : IN a DNA molecule, the guanosine content is 40%, the adenine content will be (A) 10% (B) 20% (C) 30% (D) 40%

Last Answer : Answer : A

In a DNA molecule the thymine concentration is 30%, the guanosine concentration will be (A) 10% (B) 20% (C) 30% (D) 40%

Description : In a DNA molecule the thymine concentration is 30%, the guanosine concentration will be (A) 10% (B) 20% (C) 30% (D) 40%

Last Answer : Answer : B

Maximum loan size to a single person cannot exceed ________ of total capital funds. A. 30% B. 20% C. 11% D. 10% E. None of the Above

Description : Maximum loan size to a single person cannot exceed ________ of total capital funds. A. 30% B. 20% C. 11% D. 10% E. None of the Above

Last Answer : D. 10% Explanation: Maximum loan size to a single person cannot exceed 10% of total capital funds; cannot exceed 15% in the case of a group. Small finance bank can lend 75% of their total adjusted ... capital funds to single borrower, 15% to a group Minimum 50% of loans should be up to 25 lakhs.

In the European standard, the aurial transmitter maximum radiated power is ______ of peak visual transmitter power. A. 10% B. 30% C. 20% D. 40%

Description : In the European standard, the aurial transmitter maximum radiated power is ______ of peak visual transmitter power. A. 10% B. 30% C. 20% D. 40%

Last Answer : C. 20%

The top atmosphere of the Earth directly reflects back into space nearly what part of the total amount of sun’s energy coming to it? A. 10% B. 20% C. 30% (Answer) D. 50%

Description : The top atmosphere of the Earth directly reflects back into space nearly what part of the total amount of sun’s energy coming to it? A. 10% B. 20% C. 30% (Answer) D. 50%

Last Answer : C. 30% (Answer)

The calorific value of a gas of composition CO2 = 20%, H2 = 50%, CH4 = 30%, is y. If the composition of gas is changed to H2 = 50%, CH4 = 30%, CO2 = 10%, N2 = 10%, then the calorific value will be (A) y (B) 0.95 y (C) 1.05 y (D) 1.8 y

Description : The calorific value of a gas of composition CO2 = 20%, H2 = 50%, CH4 = 30%, is y. If the composition of gas is changed to H2 = 50%, CH4 = 30%, CO2 = 10%, N2 = 10%, then the calorific value will be (A) y (B) 0.95 y (C) 1.05 y (D) 1.8 y

Last Answer : (A) y

What is the unit of the rate constant in a chemical reaction in which 10% of the reactant decomposes in one hour, 20% in two hours, 30% in three hours and so on? (A) Litre/mole.second (B) Moles/litre.second (C) Litre/mole (D) Litre/second

Description : What is the unit of the rate constant in a chemical reaction in which 10% of the reactant decomposes in one hour, 20% in two hours, 30% in three hours and so on? (A) Litre/mole.second (B) Moles/litre.second (C) Litre/mole (D) Litre/second

Last Answer : (A) Litre/mole.second

When my income was $100,000, I paid $10,000 in taxes. When my income became $200,000, I paid $40,000 in taxes. My marginal tax rate is: a. 10% b. 20% c. 30% d. 40%

Description : When my income was $100,000, I paid $10,000 in taxes. When my income became $200,000, I paid $40,000 in taxes. My marginal tax rate is: a. 10% b. 20% c. 30% d. 40%

Last Answer : c. 30%

When my income was $100,000, I paid $10,000 in taxes. When my income became $200,000, I paid $40,000 in taxes. My marginal tax rate is: a. 10% b. 20% c. 30% d. 40%

Description : When my income was $100,000, I paid $10,000 in taxes. When my income became $200,000, I paid $40,000 in taxes. My marginal tax rate is: a. 10% b. 20% c. 30% d. 40%

Last Answer : c. 30%