Excess quantity of water
(a) Makes the concrete mix harsh
(b) Makes the concrete mix unworkable
(c) Causes segregation in concrete
(d) Causes bleeding in concrete.

1 Answer

Answer :

both c&d

Related questions

Description : Insufficient quantity of water (a) Makes the concrete mix harsh (b) Makes the concrete mix unworkable (c) Causes segregation in concrete (d) Causes bleeding in concrete.

Last Answer : both a&b

Description : Pick up the correct statement from the following: (A) Insufficient quantity of water makes the concrete mix harsh (B) Insufficient quantity of water makes the concrete unworkable (C) Excess quantity of water makes the concrete segregated (D) All the above

Last Answer : (D) All the above

Description : The property of fresh concrete, in which the water in the mix tends to rise to the surface while placing and compacting, is called (A) Segregation (B) Bleeding (C) Bulking (D) Creep

Last Answer : Answer: Option B

Description : The increased cohesiveness of concrete, makes it (A) Less liable to segregation (B) More liable to segregation (C) More liable to bleeding (D) More liable for surface scaling in frosty weather

Last Answer : Answer: Option A

Description : The concrete mix which causes difficulty in obtaining a smooth finish, possess (A) Segregation (B) Internal friction (C) Hardness (D) Bleeding

Last Answer : Answer: Option C

Description : If 50 kg of fine aggregates and 100 kg of coarse aggregates are mixed in a concrete whose water cement ratio is 0.6, the weight of water required for harsh mix, is (A) 8 kg (B) 10 kg (C) 12 kg (D) 14 kg

Last Answer : Answer: Option C

Description : Explain two causes of each i) Segregation ii) Bleeding of concrete

Last Answer : Causes of Segregation: 1. Inaccurate water cement ratio. 2. Improper mixing of concrete ingredients. 3. Longer distance transportation. 4. More height of concrete placing. 5. Excessive or over ... Lean mix i.e. less cements content. 5. Delay in finishing of freshly placed concrete mix.

Description : Separation of water or water sand cement from a freshly concrete, is known (A) Bleeding (B) Creeping (C) Segregation (D) Flooding

Last Answer : Answer: Option A

Description : The separation of water or water cement mixture from the freshly laid concrete is known as [ A ] Workability [ B ] Segregation [ C ] Bleeding [ D ] Creep

Last Answer : [ C ] Bleeding

Description : A concrete using an air entrained cement (A) Has strength less than 10% to 15% (B) Has more resistance to weathering (C) Is more plastic and workable (D) Is free from segregation and bleeding

Last Answer : Answer: Option C

Description : A badly mixed cement concrete results in (A) Segregation (B) Bleeding (C) Honey combing (D) None of these

Last Answer : Answer: Option C

Description : The continuous strain, which the concrete undergoes due to application of external loads is called [ A ] Creep [ B ] Bleeding [ C ] Workability [ D ] Segregation

Last Answer : [ A ] Creep

Description : Pick up the correct statement from the following: (A) Segregation is necessary for a workable concrete (B) Consistency does not affect the workability of concrete (C) If the concrete mix is dry, the slump is maximum (D) None of these

Last Answer : Answer: Option D

Description : An excess of flaky particles in concrete aggregates (A) Decreases the workability (B) Increases the quantity of water and sand (C) More than 15% are not desirable (D) All the above

Last Answer : Answer: Option D

Description : According to Water-Cement Ratio Law, the strength of workable plastic concrete (A) Depends upon the amount of water used in the mix (B) Does not depend upon the quality of cement mixed with aggregates (C) Does not depend upon the quantity of cement mixed with aggregates (D) All the above

Last Answer : Answer: Option D

Description : For a concrete mix 1:3:6 and water cement ratio 0.6 both by weight, the quantity of water required per bag, is (A) 10 kg (B) 12 kg (C) 14 kg (D) 16 kg

Last Answer : Answer: Option C

Description : Separation of coarse aggregates from mortar during transportation, is known (A) Bleeding (B) Creeping (C) Segregation (D) Shrinkage

Last Answer : Answer: Option C

Description : During the process of hardening of cement, _______ will takes place [ A ] Bleeding [ B ] Segregation [ C ] Hydration [ D ] All the above

Last Answer : [ C ] Hydration

Description : The risk of segregation is more for (A) Wetter mix (B) Larger proportion of maximum size aggregate (C) Coarser grading (D) All the above

Last Answer : Answer: Option D

Description : Which of the following ingredient of cement when added in excess quantity, causes the cement to set slowly. (a) Lime (b) Silica (c) Alumina (d) Iron oxide

Last Answer : Lime is a common ingredient in cement. It is typically added in small amounts to help the cement set more quickly. Adding too much lime can cause the cement to set slowly. Alumina, silica, and iron oxide are also common ingredients in cement, but they do not have an effect on the setting time.

Description : A suitable admixture added at the time of preparing the concrete mix, makes the concrete (a) Water proof (b) Acid proof (c) Highly strong (d) All of the above

Last Answer : (d) All of the above

Description : Segregation is responsible for (A) Honey-combed concrete (B) Porous layers in concrete (C) Surface scaling in concrete (D) All the above

Last Answer : (D) All the above

Description : Too wet concrete may cause (A) Weakness of concrete (B) Excessive laitance (C) Segregation (D) All the above

Last Answer : (D) All the above

Description : To prevent segregation, the maximum height for placing concrete, is (A) 100 cm (B) 125 cm (C) 150 cm (D) 200 cm

Last Answer : Answer: Option A

Description : The property of the ingredients to separate from each other while placing the concrete is called (A) Segregation (B) Compaction (C) Shrinkage (D) Bulking

Last Answer : Answer: Option A

Description : Pick up the correct statement from the following: (A) Continuous grading is not necessary for obtaining a minimum of air voids (B) The omission of a certain size of aggregate is shown by ... in concrete increases the workability but also increases the liability to segregation (D) All the above

Last Answer : Answer: Option D

Description : To prevent segregation the concrete should to be thrown from a height of more than. (a) ½ m (b) 1m (c) 1.5m (d) 2m

Last Answer : (b) 1m

Description : Segregation of concrete (a) Increases the strength of concrete (b) Decreased the strength of concrete. (c) Not effect to strength of concrete. (d) None of these.

Last Answer : (b) Decreased the strength of concrete.

Description : In order to avoid segregation, the concrete should not be thrown from a height (a) Agree (b) Disagree (c) Not known (d) None of these

Last Answer : (a) Agree

Description : Segregation in concrete results in (a) Honey combing (b) Porous Layers (c) Surface scaling (d) All the above

Last Answer : (d) All the above

Description : In order to avoid segregation, fresh concrete should be dropped from a height of [ A ] Less than one meter [ B ] Less than two metres [ C ] More than one metre [ D ] More than two metres

Last Answer : [ A ] Less than one meter

Description : Pick up the correct statement from the following: (A) The lime in excess makes the cement unsound and causes the cement to expand and disintegrate (B) The silica in excess makes the cement stronger ... time also increases (C) The excess amount of alumina weakens the cement (D) All the above

Last Answer : Answer: Option D

Description : Excess lime when added (a) Makes the cement unsound (b) Causes the cement to expand and disintegrate (c) Lowering the clinkering temp of cement (d) Both ‘a’ and ‘b’

Last Answer : (d) Both ‘a’ and ‘b’

Description : The use of air-entraining agents in concretes (a) Increases workability of concrete (b) Decreases bleeding (c) Decreases strength (d) All of these

Last Answer : (d) All of these

Description : Due to Bleeding action concrete becomes [ A ] Weak [ B ] Strong [ C ] Hard [ D ] Durable

Last Answer : [ A ] Weak

Description : For given water content, workability decreases if the concrete aggregates contain an excess of (A) Thin particles (B) Flat particles (C) Elongated particles (D) All the above

Last Answer : (D) All the above

Description : Pick up the correct statement from the following: (A) The quality of water governs the strength of concrete (B) 10% excess of water reduces the strength of concrete by 15% (C) 30% excess of water reduces the strength of concrete by 50% (D) All the above

Last Answer : Answer: Option D

Description : If 30% excess water is added, the strength of concrete is reduced by (a) 30% (b) 40% (c) 50% (d) 60%

Last Answer : (c) 50%

Description : Harshness in concrete is due to the excess of (a) Water (b) Finer particles (c) Middle sized particles (d) Coarse particles

Last Answer : (c) Middle sized particles

Description : The shrinkage of concrete (A) Is proportional to water content is the mix (B) Is proportional to cement concrete (C) Increases with age of concrete (D) All the above

Last Answer : (D) All the above

Description : Pick up the correct statement from the following: (A) The weight of ingredients of concrete mix, is taken in kilograms (B) Water and aggregates are measured in litres (C) 20 bags of cement make one tonne (D) All the above

Last Answer : Answer: Option D

Description : Inert material of a cement concrete mix, is (A) Water (B) Cement (C) Aggregate (D) None of these

Last Answer : Answer: Option C

Description : Workability of concrete is inversely proportional to (A) Time of transit (B) water-cement ratio (C) The air in the mix (D) Size of aggregate

Last Answer : Answer: Option A

Description : Shrinkage in concrete can be reduced by using (A) Low water cement ratio (B) Less cement in the concrete (C) Proper concrete mix (D) All the above

Last Answer : Answer: Option D

Description : Pick up the incorrect statement from the following. While performing preliminary test on concrete (A) Proportions of the material and water should be the same as to be used at the work site (B) ... in air-tight containers (D) Concrete ingredients should be kept at a temperature of 37° 2°C

Last Answer : Answer: Option D

Description : Pick up the correct statement from the following: (A) An increase in water content must be accompanied by an increase in cement content (B) Angular and rough aggregates reduce the workability of the ... The slump of the concrete mix decreases due to an increase in temperature (D) All the above

Last Answer : Answer: Option D

Description : Workability of concrete mix with low water cement ratio is determined by (A) Tensile strength test (B) Slump test (C) Compaction factor test (D) Flexural strength test

Last Answer : Answer: Option C

Description : Internal friction between the ingredients of concrete, is decreased by using (A) Less water (B) Fine aggregates (C) Rich mix (D) More water and coarse aggregates

Last Answer : Answer: Option D

Description : The basic purpose of a retarder in concrete is (A) To increase the initial setting time of cement paste in concrete (B) To decrease the initial setting time of cement paste in concrete (C) To render the concrete more water tight (D) To improve the workability of concrete mix

Last Answer : Answer: Option A

Description : The factors which effects the design of concrete mix is (a) Fineness modulus (b) Water cement ratio (c) Slump (d) All of these

Last Answer : (d) All of these