In a pile of length , the points of suspension from ends for lifting it are located at (A) 0.207 l (B) 0.25 l (C) 0.293 l (D) 0.333

In a pile of length , the points of suspension from ends for lifting it are located at
(A) 0.207 l
(B) 0.25 l
(C) 0.293 l
(D) 0.333 l
by

1 Answer

Answer :

A
by

Related questions

During erection, the pile of length is supported by a crane at a distance of (A) 0.207 l (B) 0.293 l (C) 0.707 l (D) 0.793 l

Description : During erection, the pile of length is supported by a crane at a distance of (A) 0.207 l (B) 0.293 l (C) 0.707 l (D) 0.793 l

Last Answer : (C) 0.707 l

To ensure that the hogging bending moment at two points of suspension of a pile of length L equals the sagging moment at its centre, the distances of the points of suspension from either end, is (A) 0.107 L (B) 0.207 L (C) 0.307 L (D) 0.407 L

Description : To ensure that the hogging bending moment at two points of suspension of a pile of length L equals the sagging moment at its centre, the distances of the points of suspension from either end, is (A) 0.107 L (B) 0.207 L (C) 0.307 L (D) 0.407 L

Last Answer : Answer: Option B

A pile of length carrying a uniformly distributed load per metre length is suspended at two points, the maximum, B.M. at the centre of the pile or at the points of suspension, is (A) WL/8 (B) WL²/24 (C) WL²/47 (D) WL²/16

Description : A pile of length carrying a uniformly distributed load per metre length is suspended at two points, the maximum, B.M. at the centre of the pile or at the points of suspension, is (A) WL/8 (B) WL²/24 (C) WL²/47 (D) WL²/16

Last Answer : Answer: Option C

A pile of length carrying a uniformly distributed load per metre length is suspended at the centre and from other two points 0.15 L from either end ; the maximum hogging moment will be (A) WL²/15 (B) WL²/30 (C) WL²/60 (D) WL²/90

Description : A pile of length carrying a uniformly distributed load per metre length is suspended at the centre and from other two points 0.15 L from either end ; the maximum hogging moment will be (A) WL²/15 (B) WL²/30 (C) WL²/60 (D) WL²/90

Last Answer : Answer: Option D

A beam of length L supported on two intermediate rollers carries a uniformly distributed load on its entire length. If sagging B.M. and hogging B.M. of the beam are equal, the length of each overhang, is (A) 0.107 L (B) 0.207 L (C) 0.307 L(D) 0.407 L

Description : A beam of length L supported on two intermediate rollers carries a uniformly distributed load on its entire length. If sagging B.M. and hogging B.M. of the beam are equal, the length of each overhang, is (A) 0.107 L (B) 0.207 L (C) 0.307 L(D) 0.407 L

Last Answer : (B) 0.207 L

A simply supported beam which carries a uniformly distributed load has two equal overhangs. To have maximum B.M. produced in the beam least possible, the ratio of the length of the overhang to the total length of the beam, is (A) 0.207 (B) 0.307 (C) 0.407 (D) 0.508

Description : A simply supported beam which carries a uniformly distributed load has two equal overhangs. To  have maximum B.M. produced in the beam least possible, the ratio of the length of the overhang  to the total length of the beam, is  (A) 0.207  (B) 0.307  (C) 0.407  (D) 0.508 

Last Answer : (A) 0.207 

While designing the pile as a column, the end conditions are nearly (A) Both ends hinged (B) Both ends fixed (C) One end fixed and other end hinged (D) One end fixed and other end free

Description : While designing the pile as a column, the end conditions are nearly (A) Both ends hinged (B) Both ends fixed (C) One end fixed and other end hinged (D) One end fixed and other end free

Last Answer : Answer: Option C

The equivalent length of a column fixed at both ends, is (A) 0.5 l (B) 0.7 l (C) l (D) 1.5 l

Description : The equivalent length of a column fixed at both ends, is  (A) 0.5 l (B) 0.7 l (C) l (D) 1.5 l

Last Answer : (A) 0.5 l

The effective length of a R.C column continuing through two storeys, properly restrained at both ends in position and direction, is (a) 0.50 L (b) 0.75 L (c) L (d) 2 L

Description : The effective length of a R.C column continuing through two storeys, properly restrained at both ends in position and direction, is (a) 0.50 L (b) 0.75 L (c) L (d) 2 L

Last Answer : (b) 0.75 L

Izzard formula for the time of concentration in minutes for the plots having no channels, is (where Lo is the length of overland flow in metres and Kp rainfall intensity in cm/hour) (A) T = 111 b. L0 1/3/(Kp)2/3 (B) T = 222 b. L0 1/2/(Kp)1/3 (C) T = 333 b. L0/Kp (D) T = 111 b. L0 1/3/(Kp)2/5

Description : Izzard formula for the time of concentration in minutes for the plots having no channels, is (where Lo is the length of overland flow in metres and Kp rainfall intensity in cm/hour) (A) T = 111 b. L0 1/3/(Kp)2/3 (B) T = 222 b. L0 1/2/(Kp)1/3 (C) T = 333 b. L0/Kp (D) T = 111 b. L0 1/3/(Kp)2/5

Last Answer : Answer: Option A

Euler's formula states that the buckling load for a column of length , both ends hinged and whose least moment of inertia and modulus of elasticity of the material of the column are and respectively, is given by the relation (A) P = ²EI/l² (B) P = /EI (C) P = /l² (D) P = ²EI/l

Description : Euler's formula states that the buckling load for a column of length , both ends hinged and whose least moment of inertia and modulus of elasticity of the material of the column are and respectively, is given by the relation (A) P = ²EI/l² (B) P = /EI (C) P = /l² (D) P = ²EI/l

Last Answer : (A) P = ²EI/l²

The width of a beam of uniform strength having a constant depth d length L, simply supported at the ends with a central load W is (A) 2WL/3fd² (B) 3WL/2fd² (C) 2fL/3Wd 4 (D) 3fL²/2Wd

Description : The width of a beam of uniform strength having a constant depth d length L, simply supported at the ends with a central load W is (A) 2WL/3fd² (B) 3WL/2fd² (C) 2fL/3Wd 4 (D) 3fL²/2Wd

Last Answer : (B) 3WL/2fd²

A beam of length L is pinned at both ends and is subjected to a concentrated bending couple of moment M at its centre. The maximum bending moment in the beam is (A) M (B) M/2 (C) M/3 (D) ML/2

Description : A beam of length L is pinned at both ends and is subjected to a concentrated bending couple of  moment M at its centre. The maximum bending moment in the beam is  (A) M (B) M/2  (C) M/3  (D) ML/2 

Last Answer : (A) M

The equivalent length of a column fixed at both ends, is (a) 0.5 l (b) 0.7 l (c) l (d) 1.5 l

Description : The equivalent length of a column fixed at both ends, is (a) 0.5 l (b) 0.7 l (c) l (d) 1.5 l

Last Answer : (a) 0.5 l

In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net settlement (i.e. total settlement minus rebound) per tonne of test load should not exceed (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Description : In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net ... load should not exceed (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Last Answer : Answer: Option D

The advantage of a concrete pile over a timber pile, is (A) No decay due to termites (B) No restriction on length (C) Higher bearing capacity (D) All the above

Description : The advantage of a concrete pile over a timber pile, is (A) No decay due to termites (B) No restriction on length (C) Higher bearing capacity (D) All the above

Last Answer : Answer: Option D

The taper of precast concrete pile should not be more than (A) 1 cm per metre length (B) 2 cm per metre length (C) 4 cm per metre length (D) 5 cm per metre length

Description : The taper of precast concrete pile should not be more than (A) 1 cm per metre length (B) 2 cm per metre length (C) 4 cm per metre length (D) 5 cm per metre length

Last Answer : Answer: Option B

If there are 999 bases in an RNA that code for a protein with 333 amino acids, and the base at position 901 is deleted such that the length of the RNA becomes 998 bases, how many codons will be altered? (a) 11 (b) 33 (c) 333 (d) 1

Description : If there are 999 bases in an RNA that code for a protein with 333 amino acids, and the base at position 901 is deleted such that the length of the RNA becomes 998 bases, how many codons will be altered? (a) 11 (b) 33 (c) 333 (d) 1

Last Answer : (d) 1

If there are 999 bases in an RNA that code for a protein with 333 amino acids, and the base at position 901 is deleted such that the length of the RNA becomes 998 bases, how many codons will be altered? (a) 11 (b) 33 (c) 333 (d) 1

Description : If there are 999 bases in an RNA that code for a protein with 333 amino acids, and the base at position 901 is deleted such that the length of the RNA becomes 998 bases, how many codons will be altered? (a) 11 (b) 33 (c) 333 (d) 1

Last Answer : b) 33

If there are 999 bases in an RNA that codes for a protein with 333 amino acids, and the base at position 901 is deleted such that the length of the RNA becomes 998 bases, how many codons will be altered ? (1) 11 (2) 33 (3) 333 (4) 1

Description : If there are 999 bases in an RNA that codes for a protein with 333 amino acids, and the base at position 901 is deleted such that the length of the RNA becomes 998 bases, how many codons will be altered ? (1) 11 (2) 33 (3) 333 (4) 1

Last Answer : (2) 33

Pick up the incorrect statement from the following: (A) While measuring a distance with a tape of length 100.005 m, the distance to be increasing by 0.005 m for each tape length (B) An increase in temperature causes a tape to increase in length and the measured distance is too large (C) The straight distance between end points of a suspended tape is reduced by an amount called the sag correction (D) A 100 m tape of cross section 10 mm × 0.25 mm stretches about 10 mm under 5 kg pull

Description : Pick up the incorrect statement from the following: (A) While measuring a distance with a tape of length 100.005 m, the distance to be increasing by 0.005 m for each tape length (B) An increase in ... ) A 100 m tape of cross section 10 mm 0.25 mm stretches about 10 mm under 5 kg pull

Last Answer : (B) An increase in temperature causes a tape to increase in length and the measured distance is too large

If is the difference in height between end points of a chain of length , the required slope correction is (A) h²/2l (B) h/2l (C) h²/l (D) 2h²/2l

Description : If is the difference in height between end points of a chain of length , the required slope correction is (A) h²/2l (B) h/2l (C) h²/l (D) 2h²/2l

Last Answer : (A) h²/2l

A column of length l is fixed at both ends. The equivalent length of the column is (A) l/2 (B) l/√2 (C) l (D) 2 l

Description : A column of length l is fixed at both ends. The equivalent length of the column is (A) l/2 (B) l/√2 (C) l (D) 2 l

Last Answer : (A) l/2

A shaft of length l carries two discs at its two ends. The lowest torsional frequency is ω n . If the shaft length is doubled, then the lowest torsional frequency becomes A ω n /2 B ω n /√2 C √2ω n D 2ω n

Description : A shaft of length l carries two discs at its two ends. The lowest torsional frequency is ω n . If the shaft length is doubled, then the lowest torsional frequency becomes A ω n /2 B ω n /√2 C √2ω n D 2ω n

Last Answer : B ω n /√2

According to Euler’s column theory, the crippling load for a column of length (l) fixed at both ends is __________ the crippling load for a similar column hinged at both ends. (a) equal to (b) two times (c) four times (d) eight times

Description : According to Euler’s column theory, the crippling load for a column of length (l) fixed at both ends is __________ the crippling load for a similar column hinged at both ends. (a) equal to (b) two times (c) four times (d) eight times

Last Answer : (c) four times

A column of length (l) with both ends fixed may be considered as equivalent to a column of length __________ with both ends hinged. (a) l/8 (b) l/4 (c) l/2 (d) l

Description : A column of length (l) with both ends fixed may be considered as equivalent to a column of length __________ with both ends hinged. (a) l/8 (b) l/4 (c) l/2 (d) l

Last Answer : c) l/2

What is meant by the term antenna bandwidth A. Antenna length divided by the number of elements. B. The angle between the half-power radiation points C. The frequency range over which and antenna can be expected to perform well D. The angle formed between two imaginary line drawn through the ends of the elements

Description : What is meant by the term antenna bandwidth A. Antenna length divided by the number of elements. B. The angle between the half-power radiation points C. The frequency range over which and antenna ... perform well D. The angle formed between two imaginary line drawn through the ends of the elements

Last Answer : C. The frequency range over which and antenna can be expected to perform well

A rolled steel joist is simply supported at its ends and carries a uniformly distributed load which causes a maximum deflection of 10 mm and slope at the ends of 0.002 radian. The length of the joist will be, (A) 10 m (B) 12 m (C) 14 m (D) 16 m

Description : A rolled steel joist is simply supported at its ends and carries a uniformly distributed load which  causes a maximum deflection of 10 mm and slope at the ends of 0.002 radian. The length of the  joist will be,  (A) 10 m  (B) 12 m  (C) 14 m  (D) 16 m 

Last Answer : (D) 16 m 

The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose ends are hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2 , the permissible maximum crippling load will be (A) 1.288 tonnes (B) 12.88 (C) 128.8 tonnes (D) 288.0

Description : The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose ends are hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2 , the permissible maximum crippling load will be (A) 1.288 tonnes (B) 12.88 (C) 128.8 tonnes (D) 288.0

Last Answer : (B) 12.88

A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart. If the horizontal tension is 1500 kg find the dip in the middle of the span (A) 2.5 cm (B) 3.0 cm (C) 4.0 cm (D) 5.0 cm

Description : A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20  meters apart. If the horizontal tension is 1500 kg find the dip in the middle of the span  (A) 2.5 cm  (B) 3.0 cm  (C) 4.0 cm  (D) 5.0 cm 

Last Answer : (C) 4.0 cm

If L is the effective span of a R.C.C. beam which is subjected to maximum shear qmax at the ends, the distance from either end over which stirrups for the shear, are provided, is (A) (L/2) (1 - 3/qmax) (B) (L/3) (1 - 5/qmax) (C) (L/2) (1 - 5/qmax) (D) (L/2) (1 - 2/qmax)

Description : If L is the effective span of a R.C.C. beam which is subjected to maximum shear qmax at the ends, the distance from either end over which stirrups for the shear, are provided, is (A) (L/2) (1 - 3/qmax) (B) (L/3) (1 - 5/qmax) (C) (L/2) (1 - 5/qmax) (D) (L/2) (1 - 2/qmax)

Last Answer : Answer: Option C

What volume of `O_(2)` is soluble in `100cm^(3)` of water at 293 K.

Description : What volume of `O_(2)` is soluble in `100cm^(3)` of water at 293 K.

Last Answer : What volume of `O_(2)` is soluble in `100cm^(3)` of water at 293 K. A. `3.08c c` B. `30.8cm^(3)` C. `1.02cm^(3)` D. `4.2cm^(3)`

What 6 divided by 293 And what is the quotient and remainder?

Description : What 6 divided by 293 And what is the quotient and remainder?

Last Answer : 0.0205

How much heat is absorbed by 60.00 grams of copper when it is heated from 293 Kelvin to 353 Kelvin?

Description : How much heat is absorbed by 60.00 grams of copper when it is heated from 293 Kelvin to 353 Kelvin?

Last Answer : 1,386 J

ECE Board Exam March 1996 A receiver connected to an antenna whose resistance is 50 ohms has an equivalent noise resistance of 30 ohms. What is the receiver’s noise temperature? A. 754 K B. 464 K C. 174 K D. 293 K

Description : ECE Board Exam March 1996 A receiver connected to an antenna whose resistance is 50 ohms has an equivalent noise resistance of 30 ohms. What is the receiver’s noise temperature? A. 754 K B. 464 K C. 174 K D. 293 K

Last Answer : C. 174 K

Which solution will allow greater conductance of electricity, 1 M NaCl at 293 K or 1 M NaCl at 323 K and why ?

Description : Which solution will allow greater conductance of electricity, 1 M NaCl at 293 K or 1 M NaCl at 323 K and why ?

Last Answer : Ans. 1 M NaCl at 323 K as the ionic mobilities increase with increase in temperature. 

Convert the change of temperature from 20˚C to 30˚C to Kelvin scale.  a. 10 K  b. 293 K  c. 303 K  d. 273 K

Description : Convert the change of temperature from 20˚C to 30˚C to Kelvin scale.  a. 10 K  b. 293 K  c. 303 K  d. 273 K

Last Answer : 10 K

21, 23, 29, 53, 173, _____ a) 210 b) 893 c) 720 d) 253 e) 293

Description : 21, 23, 29, 53, 173, _____ a) 210 b) 893 c) 720 d) 253 e) 293

Last Answer : Difference between each successive tam is factorial of number starting from 2, like 23-21 = 2, then 29-23 = 6 means 3!, then 53-29 = 24 means 4!, then next difference is 173-53 = 120 means 5!, so next difference would be 6! i.e. 720 so term will be 173+720 = 893. Answer: b)

Virender Sehwag was in news recently for his score of 293 runs in the first inning of the third test match between India and Sri Lanka in Mumbai. Who has scored the highest number of double centuries in tests for India? a. Virender Sehwag b. Rahul Dravid c. Sachin Tendulkar d. Sunil Gavaskar e. Both (1) and (3)

Description : Virender Sehwag was in news recently for his score of 293 runs in the first inning of the third test match between India and Sri Lanka in Mumbai. Who has scored the highest number of double centuries in tests for ... b. Rahul Dravid c. Sachin Tendulkar d. Sunil Gavaskar e. Both (1) and (3)

Last Answer : a. Virender Sehwag

What is 20 degrees Celsius in degrees Kelvin? w) 70 degrees x) 293 degees y) 100 degrees z) 212 degrees

Description : What is 20 degrees Celsius in degrees Kelvin? w) 70 degrees x) 293 degees y) 100 degrees z) 212 degrees

Last Answer : ANSWER: X -- 293 DEGREES

A rise in temperature of 20 Kelvin degrees is equal to a rise of: w) 20 degrees Celsius x) 36 degrees Celsius y) 68 degrees Celsius z) 293 degrees Celsius

Description : A rise in temperature of 20 Kelvin degrees is equal to a rise of: w) 20 degrees Celsius x) 36 degrees Celsius y) 68 degrees Celsius z) 293 degrees Celsius

Last Answer : ANSWER: W -- 20 DEGREES CELSIUS

Is 0.37 bigger than .333?

Description : Is 0.37 bigger than .333?

Last Answer : Yes.The decimal 0.37 is 0.370000000000....The decimal 0.333 is 0.33300000000....

In a routine pile load test the test load is -- a) 1.25 times the design load b) 1.5 times the design load* c) 1.75 times the design load d) 2 times the design load

Description : In a routine pile load test the test load is -- a) 1.25 times the design load b) 1.5 times the design load* c) 1.75 times the design load d) 2 times the design load

Last Answer : b) 1.5 times the design load*

If a + b + c = 9 and ab + bc + ca = 23, then a3 + b3 + c3 – 3 abc = (a) 108 (b) 207 (c) 669 (d) 729 -Maths 9th

Description : If a + b + c = 9 and ab + bc + ca = 23, then a3 + b3 + c3 – 3 abc = (a) 108 (b) 207 (c) 669 (d) 729 -Maths 9th

Last Answer : a+b+c=9 and a2+b2+c2=35 Using formula, (a+b+c)2=a2+b2+c2+2(ab+bc+ca) 92=35+2(ab+bc+ca) 2(ab+bc+ca)=81−35=46 (ab+bc+ca)=23 using formula, (a3+b3+c3)−3abc=(a2+b2+c2−ab−bc−ca)(a+b+c) a3+b3+c3−3abc=(35−23)×9=9×12=108

The end product of `4n` series is a)`._(82)Pb^(208)` b)`._(82)Pb^(207)` c)`._(82)Pb^(209)` d)`._(82)Pb^(204)`

Description : The end product of `4n` series is a)`._(82)Pb^(208)` b)`._(82)Pb^(207)` c)`._(82)Pb^(209)` d)`._(82)Pb^(204)`

Last Answer : The end product of `4n` series is a)`._(82)Pb^(208)` b)`._(82)Pb^(207)` c)`._(82)Pb^(209)` d)`._(82) ... )Pb` C. `._(82)^(209)Pb` D. `._(83)^(210)Bi`

The isotope `._(92)^(235)U` decays in a number of steps to an isotope of `._(82)^(207)Pb`. The groups of particle emitted in this process will be:

Description : The isotope `._(92)^(235)U` decays in a number of steps to an isotope of `._(82)^(207)Pb`. The groups of particle emitted in this process will be:

Last Answer : The isotope `._(92)^(235)U` decays in a number of steps to an isotope of `._(82)^(207)Pb`. The groups ... C. `7 alpha, 4 beta` D. `10 alpha, 8 beta`

What is 9 divied by 207?

Description : What is 9 divied by 207?

Last Answer : The fraction of 9/207 can be simplified to 1/23

How many times does 61 go into 207?

Description : How many times does 61 go into 207?

Last Answer : 3 R 24

What is the LCM of 207 and 138?

Description : What is the LCM of 207 and 138?

Last Answer : 414

What is the LCM of 207 and 138?

Description : What is the LCM of 207 and 138?

Last Answer : 414