If X, Y and Z are the fineness modulli of coarse, fine and combined aggregates, the percentage (P) of fine aggregates to combined aggregates, is (A) P = [(Z - X)/(Z - Y)] × 100 (B) P = [(X - Z)/(Z - Y)] × 100 (C) P = [(X - Z)/(Z + Y)] × 100 (D) P = [(Z + X)/(Z - Y)] × 100

If X, Y and Z are the fineness modulli of coarse, fine and combined aggregates, the percentage (P)
of fine aggregates to combined aggregates, is
(A) P = [(Z - X)/(Z - Y)] × 100
(B) P = [(X - Z)/(Z - Y)] × 100
(C) P = [(X - Z)/(Z + Y)] × 100
(D) P = [(Z + X)/(Z - Y)] × 100
by

1 Answer

Answer :

Option B
by

Related questions

Index number expressing the relative sizes of both coarse and fine aggregates, is called (A) Proportioning of aggregates (B) Fineness modulus (C) Grading of aggregates (D) None of these

Description : Index number expressing the relative sizes of both coarse and fine aggregates, is called (A) Proportioning of aggregates (B) Fineness modulus (C) Grading of aggregates (D) None of these

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C) Curing of concrete is done for proper compaction of cement (D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Description : Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C ... D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Last Answer : Option D

If P, Y and Z are the weights of cement, fine aggregates and coarse aggregates respectively and W/C is the water cement ratio, the minimum quantity of water to be added to first batch, is obtained by the equation (A) 0.1P + 0.3Y + 0.1Z = W/C × P (B) 0.3P + 0.1Y + 0.01Z = W/C × P (C) 0.4P + 0.2Y + 0.01Z = W/C × P (D) 0.5P + 0.3Y + 0.01Z = W/C × P

Description : If P, Y and Z are the weights of cement, fine aggregates and coarse aggregates respectively and W/C is the water cement ratio, the minimum quantity of water to be added to first batch, is obtained by the equation (A) 0.1P + 0.3Y + 0. ... + 0.2Y + 0.01Z = W/C P (D) 0.5P + 0.3Y + 0.01Z = W/C P

Last Answer : Answer: Option B

The percentage of the aggregate of F.M. 2.6 to be combined with coarse aggregate of F.M. 6.8 for obtaining the aggregates of F.M. 5.4, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Description : The percentage of the aggregate of F.M. 2.6 to be combined with coarse aggregate of F.M. 6.8 for obtaining the aggregates of F.M. 5.4, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Last Answer : (C) 50 %

If 50 kg of fine aggregates and 100 kg of coarse aggregates are mixed in a concrete whose water cement ratio is 0.6, the weight of water required for harsh mix, is (A) 8 kg (B) 10 kg (C) 12 kg (D) 14 kg

Description : If 50 kg of fine aggregates and 100 kg of coarse aggregates are mixed in a concrete whose water cement ratio is 0.6, the weight of water required for harsh mix, is (A) 8 kg (B) 10 kg (C) 12 kg (D) 14 kg

Last Answer : Answer: Option C

If fineness modulus of sand is 2.5, it is graded as (A) Very fine sand (B) Fine sand (C) Medium sand (D) Coarse

Description : If fineness modulus of sand is 2.5, it is graded as (A) Very fine sand (B) Fine sand (C) Medium sand (D) Coarse

Last Answer : Answer: Option B

If th fineness modules of sand is 3, then the sand is graded as (a) Very fine sand (b) Fine sand (c)Medium sand (d) Coarse sand

Description : If th fineness modules of sand is 3, then the sand is graded as (a) Very fine sand (b) Fine sand (c)Medium sand (d) Coarse sand

Last Answer : (d) Coarse sand

For preparing a test-specimen, it is necessary (A) To mix cement and fine aggregate by dry hand (B) To mix coarse aggregates (C) To mix water to the cement, fine aggregates and coarse aggregates (D) All the above

Description : For preparing a test-specimen, it is necessary (A) To mix cement and fine aggregate by dry hand (B) To mix coarse aggregates (C) To mix water to the cement, fine aggregates and coarse aggregates (D) All the above

Last Answer : Answer: Option D

I.S. Sieve Nos. 10 mm and 4.75 mm are generally used for grading of (A) Coarse aggregates (B) Fine aggregates (C) Neither (a) nor (b) (D) Both (a) and (b)

Description : I.S. Sieve Nos. 10 mm and 4.75 mm are generally used for grading of (A) Coarse aggregates (B) Fine aggregates (C) Neither (a) nor (b) (D) Both (a) and (b)

Last Answer : Answer: Option D

In the method of voids for determination of the quantity of cement paste, it is assumed that (A) Voids in coarse aggregates are filled by fine aggregates (B) Voids in fine aggregates are filled by the cement paste (C) Volume of fine aggregates is equal to total voids in coarse aggregates plus 10% extra (D) All the above

Description : In the method of voids for determination of the quantity of cement paste, it is assumed that (A) Voids in coarse aggregates are filled by fine aggregates (B) Voids in fine aggregates are filled by ... of fine aggregates is equal to total voids in coarse aggregates plus 10% extra (D) All the above

Last Answer : Answer: Option D

The maximum amount of dust which may be permitted in aggregates is (A) 5% of the total aggregates for low workability with a coarse grading (B) 10% of the total aggregates for low workability with a fine grading (C) 20% of the total aggregates for a mix having high workability with fine grading (D) All the above

Description : The maximum amount of dust which may be permitted in aggregates is (A) 5% of the total aggregates for low workability with a coarse grading (B) 10% of the total aggregates for low workability with ... of the total aggregates for a mix having high workability with fine grading (D) All the above

Last Answer : Answer: Option D

Internal friction between the ingredients of concrete, is decreased by using (A) Less water (B) Fine aggregates (C) Rich mix (D) More water and coarse aggregates

Description : Internal friction between the ingredients of concrete, is decreased by using (A) Less water (B) Fine aggregates (C) Rich mix (D) More water and coarse aggregates

Last Answer : Answer: Option D

If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, 6 kg, 4 kg respectively, the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Description : If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, ... , the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) Adding 5% to 6% of moisture content by weight, increases the volume of dry sand from 18% to 38% (B) The bulking of fine sand is more than that of coarse sand (C) If the percentage content of moisture exceeds 10%, increase in bulk of sand starts increasing (D) All the above

Description : Pick up the correct statement from the following: (A) Adding 5% to 6% of moisture content by weight, increases the volume of dry sand from 18% to 38% (B) The bulking of fine sand is ... the percentage content of moisture exceeds 10%, increase in bulk of sand starts increasing (D) All the above

Last Answer : Answer: Option D

Which of the following represents a carpet of sand-bitumen mix without coarse aggregates? (A) Mastic asphalt (B) Sheet asphalt (C) Bituminous carpet (D) Bituminous concrete

Description : Which of the following represents a carpet of sand-bitumen mix without coarse aggregates? (A) Mastic asphalt (B) Sheet asphalt (C) Bituminous carpet (D) Bituminous concrete

Last Answer : Answer: Option B

For the construction of water bound macadam roads, the correct sequence of operations after spreading coarse aggregates is (A) Dry rolling, wet rolling, application of screening and application of filler (B) Dry rolling, application of filler, wet rolling and application of screening (C) Dry rolling, application of screening, wet rolling and application of filler (D) Dry rolling, application of screening, application of filler and wet rolling

Description : For the construction of water bound macadam roads, the correct sequence of operations after spreading coarse aggregates is (A) Dry rolling, wet rolling, application of screening and application of ... of filler (D) Dry rolling, application of screening, application of filler and wet rolling

Last Answer : Answer: Option C

For ensuring quality of concrete, use (A) Single sized aggregates (B) Two sized aggregate (C) Graded aggregates (D) Coarse aggregates

Description : For ensuring quality of concrete, use (A) Single sized aggregates (B) Two sized aggregate (C) Graded aggregates (D) Coarse aggregates

Last Answer : (C) Graded aggregates

Separation of coarse aggregates from mortar during transportation, is known (A) Bleeding (B) Creeping (C) Segregation (D) Shrinkage

Description : Separation of coarse aggregates from mortar during transportation, is known (A) Bleeding (B) Creeping (C) Segregation (D) Shrinkage

Last Answer : Answer: Option C

Concrete gains strength due to (A) Chemical reaction of cement with sand and coarse aggregates (B) Evaporation of water from concrete (C) Hydration of cement (D) All the above

Description : Concrete gains strength due to (A) Chemical reaction of cement with sand and coarse aggregates (B) Evaporation of water from concrete (C) Hydration of cement (D) All the above

Last Answer : Answer: Option C

The internal friction between the ingredients to concrete is minimized by (a) Adopting coarse aggregates (b) Using more water (c) Reducing the surface area (d) All of these

Description : The internal friction between the ingredients to concrete is minimized by (a) Adopting coarse aggregates (b) Using more water (c) Reducing the surface area (d) All of these

Last Answer : (d) All of these

Which of the following statement is correct (a) The maximum size of coarse aggregate should not exceed one fourth of the minimum dimension of the plain concrete member. (b) The maximum size of coarse aggregate should not exceed one fifty of the minimum dimension of the reinforced concrete member (c)The aggregates of 40mm, 20mm and 10mm sizes are commonly used for concrete works (d) All the above

Description : Which of the following statement is correct (a) The maximum size of coarse aggregate should not exceed one fourth of the minimum dimension of the plain concrete member. (b) The maximum size of coarse ... aggregates of 40mm, 20mm and 10mm sizes are commonly used for concrete works (d) All the above

Last Answer : (d) All the above

The proportion of coarse aggregates to fire aggregates in structural concrete is usually [ A ] 0.50 - 1.25 [ B ] 1.25 - 4.50 [ C ] 1.50 - 2.50 [ D ] 0.25 - 0.75

Description : The proportion of coarse aggregates to fire aggregates in structural concrete is usually [ A ] 0.50 - 1.25 [ B ] 1.25 - 4.50 [ C ] 1.50 - 2.50 [ D ] 0.25 - 0.75

Last Answer : [ C ] 1.50 - 2.50

Concrete gains strength due to [ A ] Chemical reaction of cement with sand and coarse aggregates [ B ] Evaporation of water from concrete [ C ] Hydration of cement [ D ] All the above

Description : Concrete gains strength due to [ A ] Chemical reaction of cement with sand and coarse aggregates [ B ] Evaporation of water from concrete [ C ] Hydration of cement [ D ] All the above

Last Answer : [ C ] Hydration of cement

The fineness modulus of fine aggregate is in the range of (A) 2.0 to 3.5 (B) 3.5 to 5.0 (C) 5.0 to 7.0 (D) 6.0 to 8.5

Description : The fineness modulus of fine aggregate is in the range of (A) 2.0 to 3.5 (B) 3.5 to 5.0 (C) 5.0 to 7.0 (D) 6.0 to 8.5

Last Answer : (A) 2.0 to 3.5

Pick up the correct statement from the following: (A) The ratio of total volume of voids in soil aggregates to the total volume of aggregate, is called Porosity (B) Water retained by the interstices due to molecular attraction, is called pellicular water (C) Sum of the percentage of specific yield and specific retention is 100 (D) All the above

Description : Pick up the correct statement from the following: (A) The ratio of total volume of voids in soil aggregates to the total volume of aggregate, is called Porosity (B) Water retained by the interstices ... (C) Sum of the percentage of specific yield and specific retention is 100 (D) All the above

Last Answer : Answer: Option D

Illustrate the effect of properties of coarse aggregates on compressive strength of concrete.

Description : Illustrate the effect of properties of coarse aggregates on compressive strength of concrete.

Last Answer : Effect of properties of coarse aggregates on compressive strength of concrete. i. Size of aggregate: If coarse aggregate particles are of large size (say 20 mm) in concrete mixture , then ... of strength. But if water absorption is less concrete becomes as per proportion giving required strength.

The size of fine aggregates does not exceed (A) 2.75 mm (B) 3.00 mm (C) 3.75 mm (D) 4.75 mm

Description : The size of fine aggregates does not exceed (A) 2.75 mm (B) 3.00 mm (C) 3.75 mm (D) 4.75 mm

Last Answer : Answer: Option D

The size of fine aggregates does not exceed [ A ] 2.75 mm [ B ] 3.75 mm [ C ] 4.75 mm [ D ] 5.75 mm

Description : The size of fine aggregates does not exceed [ A ] 2.75 mm [ B ] 3.75 mm [ C ] 4.75 mm [ D ] 5.75 mm

Last Answer : [ C ] 4.75 mm

The strainer type tube well, is unsuitable for (A) Coarse gravels (B) Fine sandy strata (C) Clean gravels (D) None of these

Description : The strainer type tube well, is unsuitable for (A) Coarse gravels (B) Fine sandy strata (C) Clean gravels (D) None of these

Last Answer : (B) Fine sandy strata

The soil which contains finest grain particles, is (A) Coarse sand (B) Fine sand (C) Silt (D) Clay

Description : The soil which contains finest grain particles, is (A) Coarse sand (B) Fine sand (C) Silt (D) Clay

Last Answer : (D) Clay

For better strength and stability, the fine grained soils and coarse grained soils are compacted respectively as (A) Dry of OMC and wet of OMC (B) Wet of OMC and dry of OMC (C) Wet of OMC and wet of OMC (D) Dry of OMC and dry of OMC where OMC is optimum moisture content

Description : For better strength and stability, the fine grained soils and coarse grained soils are compacted respectively as (A) Dry of OMC and wet of OMC (B) Wet of OMC and dry of OMC (C) Wet of OMC and wet of OMC (D) Dry of OMC and dry of OMC where OMC is optimum moisture content

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) The dry density reduces by addition of water after attaining optimum moisture content (B) The line joining the peak of three moisture content graphs obtained by using three compactive energies, is called line of optimus (C) Well graded coarse grained soils can be compacted to a very high density as compared to fine grained soils (D) All the above

Description : Pick up the correct statement from the following: (A) The dry density reduces by addition of water after attaining optimum moisture content (B) The line joining the peak of three moisture content graphs ... be compacted to a very high density as compared to fine grained soils (D) All the above

Last Answer : Answer: Option D

The most suitable material for the central impervious core of a zoned embankment type dam is (A) Clay (B) Coarse sand (C) Silty clay (D) Clay mixed with fine sand

Description : The most suitable material for the central impervious core of a zoned embankment type dam is (A) Clay (B) Coarse sand (C) Silty clay (D) Clay mixed with fine sand

Last Answer : Answer: Option D

The void ratio of (A) Single size coarse aggregate is roughly 0.45 (B) Graded coarse aggregate is roughly 0.040 (C) Fine aggregate is roughly 0.45 (D) All the abo

Description : The void ratio of (A) Single size coarse aggregate is roughly 0.45 (B) Graded coarse aggregate is roughly 0.040 (C) Fine aggregate is roughly 0.45 (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Bulking of sand is caused due to formation of a thin film of surface moisture (B) Fine sand bulks more than coarse sand (C) The volume of fully saturated sand, is equal to the volume of dry and loose sand (D) All the above

Description : Pick up the correct statement from the following: (A) Bulking of sand is caused due to formation of a thin film of surface moisture (B) Fine sand bulks more than coarse sand (C) The volume of fully saturated sand, is equal to the volume of dry and loose sand (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The maximum size of a coarse aggregate, is 75 mm and minimum 4.75 mm (B) The maximum size of the fine aggregate, is 4.75 mm and minimum 0.075 mm (C) The material having particles of size varying from 0.06 mm to 0.002 mm, is known as silt (D) All the ab

Description : Pick up the correct statement from the following: (A) The maximum size of a coarse aggregate, is 75 mm and minimum 4.75 mm (B) The maximum size of the fine aggregate, is 4.75 mm and minimum 0.075 mm ( ... having particles of size varying from 0.06 mm to 0.002 mm, is known as silt (D) All the ab

Last Answer : Answer: Option D

The maximum bearing capacity of soil is that of (A) Black cotton soil (B) Loose fine sandy soil (C) Dry coarse sandy soil (D) Hard rocks

Description : The maximum bearing capacity of soil is that of (A) Black cotton soil (B) Loose fine sandy soil (C) Dry coarse sandy soil (D) Hard rocks

Last Answer : Answer: Option D

Which one of the following statements is correct? (a) Adding 5% to 6% of moisture by weight increases the volume of dry sand from 18% to 38% (b) The bulking of fine sand is more than that of coarse sand (c ) Volume of fully saturated sand is equal to that of dry sand (d) All of the above

Description : Which one of the following statements is correct? (a) Adding 5% to 6% of moisture by weight increases the volume of dry sand from 18% to 38% (b) The bulking of fine sand is more than that of coarse sand (c ) Volume of fully saturated sand is equal to that of dry sand (d) All of the above

Last Answer : (d) All of the above

In order to prepare a test specimen, it is necessary to (a) Mix the cement and fine aggregate (sand ) dry hand (b) Mix the coarse aggregate (c) Mix water to the cement, fine aggregate and coarse aggregate (d) All of the above

Description : In order to prepare a test specimen, it is necessary to (a) Mix the cement and fine aggregate (sand ) dry hand (b) Mix the coarse aggregate (c) Mix water to the cement, fine aggregate and coarse aggregate (d) All of the above

Last Answer : (d) All of the above

The aggregate which pass through 75mm IS sieve and entirely retain on 4.75 IS sieve is known as (a) Cyclopean aggregate (b) Coarse aggregate (c)Fine aggregate (d) Aall-in-aggregate

Description : The aggregate which pass through 75mm IS sieve and entirely retain on 4.75 IS sieve is known as (a) Cyclopean aggregate (b) Coarse aggregate (c)Fine aggregate (d) Aall-in-aggregate

Last Answer : (b) Coarse aggregate

Colloidal mills are used for __________ grinding. (A) Coarse (B) Intermediate (C) Fine (D) Ultrafine

Description : Colloidal mills are used for __________ grinding. (A) Coarse (B) Intermediate (C) Fine (D) Ultrafine

Last Answer : (D) Ultrafine

Ultra centrifuges are used for the separation of __________ solid particles. (A) Coarse (B) Fine (C) Colloidal (D) Dissolved

Description : Ultra centrifuges are used for the separation of __________ solid particles. (A) Coarse (B) Fine (C) Colloidal (D) Dissolved

Last Answer : (C) Colloidal

Wet sieving is employed, when the product contains __________ materials. (A) Abrasive (B) Large quantity of very fine (C) Coarse (D) Non-sticky

Description : Wet sieving is employed, when the product contains __________ materials. (A) Abrasive (B) Large quantity of very fine (C) Coarse (D) Non-sticky

Last Answer : (B) Large quantity of very fine

Ball mill is used for (A) Crushing (B) Coarse grinding (C) Fine grinding (D) Attrition

Description : Ball mill is used for (A) Crushing (B) Coarse grinding (C) Fine grinding (D) Attrition

Last Answer : (C) Fine grinding

Grizzlies are used for separating __________ solids. (A) Coarse (B) Fine (C) Any size (D) None of these

Description : Grizzlies are used for separating __________ solids. (A) Coarse (B) Fine (C) Any size (D) None of these

Last Answer : (B) Fine

__________ are used for the separation of coarse particles from a slurry of fine particles. (A) Thickeners (B) Classifiers (C) Hydrocyclones (D) Decanters

Description : __________ are used for the separation of coarse particles from a slurry of fine particles. (A) Thickeners (B) Classifiers (C) Hydrocyclones (D) Decanters

Last Answer : (B) Classifiers

In case of a ball mill, (A) Coarse feed requires a larger ball (B) Fine feed requires a larger ball (C) Operating speed should be more than the critical speed (D) None of these

Description : In case of a ball mill, (A) Coarse feed requires a larger ball (B) Fine feed requires a larger ball (C) Operating speed should be more than the critical speed (D) None of these

Last Answer : (A) Coarse feed requires a larger ball

Pick out the wrong statement pertaining to leaching. (A) Fine solids cannot be leached in a Pachuca tank (B) Door classifier can be used for leaching of coarse solids (C) Vegetable seeds can be leached in either of Bollman extractor, Rotocel or Kennedy extractor (D) Very high temperature is not needed for the leaching of sugar beet

Description : Pick out the wrong statement pertaining to leaching. (A) Fine solids cannot be leached in a Pachuca tank (B) Door classifier can be used for leaching of coarse solids (C) Vegetable seeds can be ... , Rotocel or Kennedy extractor (D) Very high temperature is not needed for the leaching of sugar beet

Last Answer : (A) Fine solids cannot be leached in a Pachuca tank

Which type of threads is recommended for fluctuating loads? a) Fine threads b) Coarse Threads c) Either of fine or coarse d) None of the listed

Description : Which type of threads is recommended for fluctuating loads? a) Fine threads b) Coarse Threads c) Either of fine or coarse d) None of the listed

Last Answer : a) Fine threads