Pick up the correct statement from the following: (A) The maximum size of a coarse aggregate, is 75 mm and minimum 4.75 mm (B) The maximum size of the fine aggregate, is 4.75 mm and minimum 0.075 mm (C) The material having particles of size varying from 0.06 mm to 0.002 mm, is known as silt (D) All the ab

Pick up the correct statement from the following:
(A) The maximum size of a coarse aggregate, is 75 mm and minimum 4.75 mm
(B) The maximum size of the fine aggregate, is 4.75 mm and minimum 0.075 mm
(C) The material having particles of size varying from 0.06 mm to 0.002 mm, is known as silt
(D) All the ab
by

1 Answer

Answer :

Answer: Option D
by

Related questions

According to IS classification, the range of silt size particles is (A) 4.75 mm to 2.00 mm (B) 2.00 mm to 0.425 mm (C) 0.425 mm to 0.075 mm (D) 0.075 mm to 0.002 mm

Description : According to IS classification, the range of silt size particles is (A) 4.75 mm to 2.00 mm (B) 2.00 mm to 0.425 mm (C) 0.425 mm to 0.075 mm (D) 0.075 mm to 0.002 mm

Last Answer : (D) 0.075 mm to 0.002 mm

Minimum size of the particles of silt soil, is (A) 0.002 mm (B) 0.04 mm (C) 0.06 mm (D) 0.08 mm

Description : Minimum size of the particles of silt soil, is (A) 0.002 mm (B) 0.04 mm (C) 0.06 mm (D) 0.08 mm

Last Answer : (A) 0.002 mm

Pick up the correct statement about silt soil from the following: (A) The silt soil has particle size from 0.02 mm to 0.06 mm (B) In organic fine grained silt soil possesses no plasticity (C) The least plastic type normally consists of more or less equidimensional grains of quartz (D) All the above

Description : Pick up the correct statement about silt soil from the following: (A) The silt soil has particle size from 0.02 mm to 0.06 mm (B) In organic fine grained silt soil possesses no ... The least plastic type normally consists of more or less equidimensional grains of quartz (D) All the above

Last Answer : Answer: Option D

Maximum size of clay particles is: (A) 0.002 mm (B) 0.04 mm (C) 0.06 mm (D) 0.08 mm

Description : Maximum size of clay particles is: (A) 0.002 mm (B) 0.04 mm (C) 0.06 mm (D) 0.08 mm

Last Answer : (A) 0.002 mm

The soil which contains finest grain particles, is (A) Coarse sand (B) Fine sand (C) Silt (D) Clay

Description : The soil which contains finest grain particles, is (A) Coarse sand (B) Fine sand (C) Silt (D) Clay

Last Answer : (D) Clay

Which of the following statement is correct (a) The maximum size of coarse aggregate should not exceed one fourth of the minimum dimension of the plain concrete member. (b) The maximum size of coarse aggregate should not exceed one fifty of the minimum dimension of the reinforced concrete member (c)The aggregates of 40mm, 20mm and 10mm sizes are commonly used for concrete works (d) All the above

Description : Which of the following statement is correct (a) The maximum size of coarse aggregate should not exceed one fourth of the minimum dimension of the plain concrete member. (b) The maximum size of coarse ... aggregates of 40mm, 20mm and 10mm sizes are commonly used for concrete works (d) All the above

Last Answer : (d) All the above

The aggregate which pass through 75mm IS sieve and entirely retain on 4.75 IS sieve is known as (a) Cyclopean aggregate (b) Coarse aggregate (c)Fine aggregate (d) Aall-in-aggregate

Description : The aggregate which pass through 75mm IS sieve and entirely retain on 4.75 IS sieve is known as (a) Cyclopean aggregate (b) Coarse aggregate (c)Fine aggregate (d) Aall-in-aggregate

Last Answer : (b) Coarse aggregate

If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, 6 kg, 4 kg respectively, the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Description : If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, ... , the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Last Answer : Answer: Option C

The void ratio of (A) Single size coarse aggregate is roughly 0.45 (B) Graded coarse aggregate is roughly 0.040 (C) Fine aggregate is roughly 0.45 (D) All the abo

Description : The void ratio of (A) Single size coarse aggregate is roughly 0.45 (B) Graded coarse aggregate is roughly 0.040 (C) Fine aggregate is roughly 0.45 (D) All the above

Last Answer : Answer: Option D

The diameter of very fine sand particles is- (a) Below 0.002 mm (b) 0.05-0.002mm (c) 0.01-0.05 mm (d) 0.05-0.10mm

Description : The diameter of very fine sand particles is- (a) Below 0.002 mm (b) 0.05-0.002mm (c) 0.01-0.05 mm (d) 0.05-0.10mm

Last Answer : (c) 0.01-0.05 mm

Particles of 0.002 mm size are that of (A) Clay (B) Sand (C) Gravel (D) None of these

Description : Particles of 0.002 mm size are that of (A) Clay (B) Sand (C) Gravel (D) None of these

Last Answer : Answer: Option A

If aggregates completely pass through a sieve of size 75 mm and are retained on a sieve of size 60 mm, the particular aggregate will be flaky if its minimum dimension is less than (A) 20.5 mm (B) 30.5 mm (C) 40.5 mm (D) 50.5 mm

Description : If aggregates completely pass through a sieve of size 75 mm and are retained on a sieve of size 60 mm, the particular aggregate will be flaky if its minimum dimension is less than (A) 20.5 mm (B) 30.5 mm (C) 40.5 mm (D) 50.5 mm

Last Answer : Answer: Option C

I.S. Sieve Nos. 10 mm and 4.75 mm are generally used for grading of (A) Coarse aggregates (B) Fine aggregates (C) Neither (a) nor (b) (D) Both (a) and (b)

Description : I.S. Sieve Nos. 10 mm and 4.75 mm are generally used for grading of (A) Coarse aggregates (B) Fine aggregates (C) Neither (a) nor (b) (D) Both (a) and (b)

Last Answer : Answer: Option D

The size of clay particles are— (A) 1•0 mm (B) 0•2 – 0•02 mm (C) < 0•02 mm (D) < 0•002 mm

Description : The size of clay particles are— (A) 1•0 mm (B) 0•2 – 0•02 mm (C) < 0•02 mm (D) < 0•002 mm

Last Answer : (D) < 0•002 mm

An aggregate is known as cyclopean aggregate if its size is more than (A) 4.75 mm (B) 30 mm (C) 60 mm (D) 75 mm

Description : An aggregate is known as cyclopean aggregate if its size is more than (A) 4.75 mm (B) 30 mm (C) 60 mm (D) 75 mm

Last Answer : Answer: Option D

For preparing a test-specimen, it is necessary (A) To mix cement and fine aggregate by dry hand (B) To mix coarse aggregates (C) To mix water to the cement, fine aggregates and coarse aggregates (D) All the above

Description : For preparing a test-specimen, it is necessary (A) To mix cement and fine aggregate by dry hand (B) To mix coarse aggregates (C) To mix water to the cement, fine aggregates and coarse aggregates (D) All the above

Last Answer : Answer: Option D

In order to prepare a test specimen, it is necessary to (a) Mix the cement and fine aggregate (sand ) dry hand (b) Mix the coarse aggregate (c) Mix water to the cement, fine aggregate and coarse aggregate (d) All of the above

Description : In order to prepare a test specimen, it is necessary to (a) Mix the cement and fine aggregate (sand ) dry hand (b) Mix the coarse aggregate (c) Mix water to the cement, fine aggregate and coarse aggregate (d) All of the above

Last Answer : (d) All of the above

The Minimum bar spacing should not be less than [ A ] Diameter of the largest bar [ B ] Maximum size of aggregate [ C ] Greater of diameter of the largest bar and maximum size of aggregate [ D ] Greater of diameter of the largest bar and maximum size of aggregate plus 5 mm

Description : The Minimum bar spacing should not be less than [ A ] Diameter of the largest bar [ B ] Maximum size of aggregate [ C ] Greater of diameter of the largest bar and maximum size of aggregate [ D ] Greater of diameter of the largest bar and maximum size of aggregate plus 5 mm

Last Answer : [ D ] Greater of diameter of the largest bar and maximum size of aggregate plus 5 mm

Pick up the correct statement from the following: (A) Continuous grading is not necessary for obtaining a minimum of air voids (B) The omission of a certain size of aggregate is shown by a straight horizontal line on the grading curve (C) The omission of a certain size of aggregate in concrete increases the workability but also increases the liability to segregation (D) All the above

Description : Pick up the correct statement from the following: (A) Continuous grading is not necessary for obtaining a minimum of air voids (B) The omission of a certain size of aggregate is shown by ... in concrete increases the workability but also increases the liability to segregation (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The dry density reduces by addition of water after attaining optimum moisture content (B) The line joining the peak of three moisture content graphs obtained by using three compactive energies, is called line of optimus (C) Well graded coarse grained soils can be compacted to a very high density as compared to fine grained soils (D) All the above

Description : Pick up the correct statement from the following: (A) The dry density reduces by addition of water after attaining optimum moisture content (B) The line joining the peak of three moisture content graphs ... be compacted to a very high density as compared to fine grained soils (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Bulking of sand is caused due to formation of a thin film of surface moisture (B) Fine sand bulks more than coarse sand (C) The volume of fully saturated sand, is equal to the volume of dry and loose sand (D) All the above

Description : Pick up the correct statement from the following: (A) Bulking of sand is caused due to formation of a thin film of surface moisture (B) Fine sand bulks more than coarse sand (C) The volume of fully saturated sand, is equal to the volume of dry and loose sand (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Adding 5% to 6% of moisture content by weight, increases the volume of dry sand from 18% to 38% (B) The bulking of fine sand is more than that of coarse sand (C) If the percentage content of moisture exceeds 10%, increase in bulk of sand starts increasing (D) All the above

Description : Pick up the correct statement from the following: (A) Adding 5% to 6% of moisture content by weight, increases the volume of dry sand from 18% to 38% (B) The bulking of fine sand is ... the percentage content of moisture exceeds 10%, increase in bulk of sand starts increasing (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C) Curing of concrete is done for proper compaction of cement (D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Description : Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C ... D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Last Answer : Option D

Pick up the correct statement from the following: (A) Sand consists of coarse particles of silica formed due to the disintegration of rocks (B) The grains of sand are not affected by frost (C) Sand beds are permeable and do not allow water to rise up between pores due to capillary action (D) All the above

Description : Pick up the correct statement from the following: (A) Sand consists of coarse particles of silica formed due to the disintegration of rocks (B) The grains of sand are not affected by frost (C) Sand ... and do not allow water to rise up between pores due to capillary action (D) All the above

Last Answer : Answer: Option D

The minimum particle size of fine aggregate is (a) 0.0075mm (b) 0.075mm (c)0.75mm (d)0.95m

Description : The minimum particle size of fine aggregate is (a) 0.0075mm (b) 0.075mm (c)0.75mm (d)0.95m

Last Answer : (b) 0.075mm

Pick out the wrong statement: (A) Magnetic separation method can be employed to treat both dry & wet ores (B) Reduction ratio in crushing operation is defined as the ratio of minimum feed size to the maximum product size (C) Gyratory crusher is used for coarse crushing (D) Screens are of stationary, moving and vibratory types

Description : Pick out the wrong statement: (A) Magnetic separation method can be employed to treat both dry & wet ores (B) Reduction ratio in crushing operation is defined as the ratio of minimum feed ... ) Gyratory crusher is used for coarse crushing (D) Screens are of stationary, moving and vibratory types

Last Answer : (B) Reduction ratio in crushing operation is defined as the ratio of minimum feed size to the maximum product size

Pick up the correct statement from the following: (A) Sandy clayloam contains highest percentage of sand (B) Silty clayloam contains highest percentage of silt (C) Stiff boulder clay offers maximum shear strength (D) Soft chalk carries least safe load

Description : Pick up the correct statement from the following: (A) Sandy clayloam contains highest percentage of sand (B) Silty clayloam contains highest percentage of silt (C) Stiff boulder clay offers maximum shear strength (D) Soft chalk carries least safe load

Last Answer : Answer: Option B

Stoke's law does not hold good if the size of particle is smaller than (A) 0.0002 mm (B) 0.002 mm (C) 0.02 mm (D) 0.2 mm

Description : Stoke's law does not hold good if the size of particle is smaller than (A) 0.0002 mm (B) 0.002 mm (C) 0.02 mm (D) 0.2 mm

Last Answer : (A) 0.0002 mm

A rolled steel joist is simply supported at its ends and carries a uniformly distributed load which causes a maximum deflection of 10 mm and slope at the ends of 0.002 radian. The length of the joist will be, (A) 10 m (B) 12 m (C) 14 m (D) 16 m

Description : A rolled steel joist is simply supported at its ends and carries a uniformly distributed load which  causes a maximum deflection of 10 mm and slope at the ends of 0.002 radian. The length of the  joist will be,  (A) 10 m  (B) 12 m  (C) 14 m  (D) 16 m 

Last Answer : (D) 16 m 

The maximum amount of dust which may be permitted in aggregates is (A) 5% of the total aggregates for low workability with a coarse grading (B) 10% of the total aggregates for low workability with a fine grading (C) 20% of the total aggregates for a mix having high workability with fine grading (D) All the above

Description : The maximum amount of dust which may be permitted in aggregates is (A) 5% of the total aggregates for low workability with a coarse grading (B) 10% of the total aggregates for low workability with ... of the total aggregates for a mix having high workability with fine grading (D) All the above

Last Answer : Answer: Option D

A soil sample has passing 0.075 mm sieve = 60% liquid limit = 65% and plastic limit = 40%. The group index of the soil, is (A) 5 (B) 20 (C) 40(D) None of these

Description : A soil sample has passing 0.075 mm sieve = 60% liquid limit = 65% and plastic limit = 40%. The group index of the soil, is (A) 5 (B) 20 (C) 40 (D) None of these

Last Answer : (D) None of these

If P, Y and Z are the weights of cement, fine aggregates and coarse aggregates respectively and W/C is the water cement ratio, the minimum quantity of water to be added to first batch, is obtained by the equation (A) 0.1P + 0.3Y + 0.1Z = W/C × P (B) 0.3P + 0.1Y + 0.01Z = W/C × P (C) 0.4P + 0.2Y + 0.01Z = W/C × P (D) 0.5P + 0.3Y + 0.01Z = W/C × P

Description : If P, Y and Z are the weights of cement, fine aggregates and coarse aggregates respectively and W/C is the water cement ratio, the minimum quantity of water to be added to first batch, is obtained by the equation (A) 0.1P + 0.3Y + 0. ... + 0.2Y + 0.01Z = W/C P (D) 0.5P + 0.3Y + 0.01Z = W/C P

Last Answer : Answer: Option B

(C)A well is considered to be good if it is sunk into (A) Clay (B) Sand (C) Coarse gravel (D) Silt

Description : A well is considered to be good if it is sunk into (A) Clay (B) Sand (C) Coarse gravel (D) Silt

Last Answer : (C) Coarse gravel

A well is considered to be good if it is sunk into (A) Clay (B) Sand (C) Coarse gravel (D) Silt

Description : A well is considered to be good if it is sunk into (A) Clay (B) Sand (C) Coarse gravel (D) Silt

Last Answer : (C) Coarse gravel

The specific retention is least in case of (A) Clay (B) Sand (C) Silt (D) Coarse gravel

Description : The specific retention is least in case of (A) Clay (B) Sand (C) Silt (D) Coarse gravel

Last Answer : (D) Coarse gravel

The size of fine aggregates does not exceed (A) 2.75 mm (B) 3.00 mm (C) 3.75 mm (D) 4.75 mm

Description : The size of fine aggregates does not exceed (A) 2.75 mm (B) 3.00 mm (C) 3.75 mm (D) 4.75 mm

Last Answer : Answer: Option D

The size of fine aggregates does not exceed [ A ] 2.75 mm [ B ] 3.75 mm [ C ] 4.75 mm [ D ] 5.75 mm

Description : The size of fine aggregates does not exceed [ A ] 2.75 mm [ B ] 3.75 mm [ C ] 4.75 mm [ D ] 5.75 mm

Last Answer : [ C ] 4.75 mm

For the construction of cement concrete floor, the maximum permissible size of aggregate, is (A) 4 mm (B) 6 mm (C) 8 mm (D) 10 mm

Description : For the construction of cement concrete floor, the maximum permissible size of aggregate, is (A) 4 mm (B) 6 mm (C) 8 mm (D) 10 mm

Last Answer : Answer: Option D

Select the incorrect statement. Effective angle of shearing resistance (A) Increases as the size of particles increases (B) Increases as the soil gradation improves (C) Is limited to a maximum value of 45° (D) Is rarely more than 30° for fine grained soil

Description : Select the incorrect statement. Effective angle of shearing resistance (A) Increases as the size of particles increases (B) Increases as the soil gradation improves (C) Is limited to a maximum value of 45° (D) Is rarely more than 30° for fine grained soil

Last Answer : (C) Is limited to a maximum value of 45°

The settling velocity of the particles larger than 0.06 mm in a settling tank of depth 2.4 is 0.33 m per sec. The detention period recommended for the tank, is A. 30 minutes B. 1 hour C. 1 hour and 30 minutes D. 2 hours

Description : The settling velocity of the particles larger than 0.06 mm in a settling tank of depth 2.4 is 0.33 m per sec. The detention period recommended for the tank, is A. 30 minutes B. 1 hour C. 1 hour and 30 minutes D. 2 hours

Last Answer : ANS: D

Pick up the correct statement from the following: (A) The ratio of the total sediment deposited in the reservoir to the total sediment flowing in the river, is called trap efficiency (B) Small capacity reservoirs on large rivers generally, silt less (C) Large capacity reservoirs on small rivers generally silt more (D) All the above

Description : Pick up the correct statement from the following:  (A) The ratio of the total sediment deposited in the reservoir to the total sediment flowing in  the river, is called trap efficiency  ( ... less  (C) Large capacity reservoirs on small rivers generally silt more  (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) Sand obtained from pits, is washed to remove clay and silt (B) Sand obtained from flooded pits, need not be washed before use (C) The chloride in sea shore sand and shingle may cause corrosion of reinforcement if the concrete is porous (D) All the above

Description : Pick up the correct statement from the following: (A) Sand obtained from pits, is washed to remove clay and silt (B) Sand obtained from flooded pits, need not be washed before use (C) The ... shore sand and shingle may cause corrosion of reinforcement if the concrete is porous (D) All the above

Last Answer : Answer: Option D

Pick out the wrong statement pertaining to leaching. (A) Fine solids cannot be leached in a Pachuca tank (B) Door classifier can be used for leaching of coarse solids (C) Vegetable seeds can be leached in either of Bollman extractor, Rotocel or Kennedy extractor (D) Very high temperature is not needed for the leaching of sugar beet

Description : Pick out the wrong statement pertaining to leaching. (A) Fine solids cannot be leached in a Pachuca tank (B) Door classifier can be used for leaching of coarse solids (C) Vegetable seeds can be ... , Rotocel or Kennedy extractor (D) Very high temperature is not needed for the leaching of sugar beet

Last Answer : (A) Fine solids cannot be leached in a Pachuca tank

Which of the following is the correct order of increasing size of the grains of soil particles? 1. Clay 2. Silt 3. Sand 4. Gravel (a) BCDA (b) ABCD (c) DCBA (d) ADCB

Description : Which of the following is the correct order of increasing size of the grains of soil particles? 1. Clay 2. Silt 3. Sand 4. Gravel (a) BCDA (b) ABCD (c) DCBA (d) ADCB

Last Answer : Ans: (b)

Pick out the wrong statement. (A) Recycled coarse material to the grinder by a classifier is termed as circulating load (B) Wear and tear in wet crushing is more than that in dry crushing of materials (C) Size enlargement (opposite of size reduction) is not a mechanical operation (D) A 'dust catcher' is simply an enlargement in a pipeline which permits the solids to settle down due to reduction in velocity of the dust laden gas

Description : Pick out the wrong statement. (A) Recycled coarse material to the grinder by a classifier is termed as circulating load (B) Wear and tear in wet crushing is more than that in dry crushing of ... a pipeline which permits the solids to settle down due to reduction in velocity of the dust laden gas

Last Answer : (C) Size enlargement (opposite of size reduction) is not a mechanical operation

The most suitable material for the central impervious core of a zoned embankment type dam is (A) Clay (B) Coarse sand (C) Silty clay (D) Clay mixed with fine sand

Description : The most suitable material for the central impervious core of a zoned embankment type dam is (A) Clay (B) Coarse sand (C) Silty clay (D) Clay mixed with fine sand

Last Answer : Answer: Option D

Ultra centrifuges are used for the separation of __________ solid particles. (A) Coarse (B) Fine (C) Colloidal (D) Dissolved

Description : Ultra centrifuges are used for the separation of __________ solid particles. (A) Coarse (B) Fine (C) Colloidal (D) Dissolved

Last Answer : (C) Colloidal

__________ are used for the separation of coarse particles from a slurry of fine particles. (A) Thickeners (B) Classifiers (C) Hydrocyclones (D) Decanters

Description : __________ are used for the separation of coarse particles from a slurry of fine particles. (A) Thickeners (B) Classifiers (C) Hydrocyclones (D) Decanters

Last Answer : (B) Classifiers

The designation M 36 × 2 means (A) Metric fine threads of 36 mm outside diameter and 2 mm pitch (B) Metric coarse threads of 36 mm outside diameter and 2 mm pitch (C) Metric threads of 36 mm pitch diameter and 2 mm pitch (D) Metric threads of 36 mm core diameter and 2 mm pitch

Description : The designation M 36 × 2 means (A) Metric fine threads of 36 mm outside diameter and 2 mm pitch (B) Metric coarse threads of 36 mm outside diameter and 2 mm pitch (C) Metric threads of 36 mm pitch diameter and 2 mm pitch (D) Metric threads of 36 mm core diameter and 2 mm pitch

Last Answer : (A) Metric fine threads of 36 mm outside diameter and 2 mm pitch