Pick up the correct statement from the following:
(A) The ratio of total volume of voids in soil aggregates to the total volume of aggregate, is
called Porosity
(B) Water retained by the interstices due to molecular attraction, is called pellicular water
(C) Sum of the percentage of specific yield and specific retention is 100
(D) All the above

1 Answer

Answer :

Answer: Option D

Related questions

Description : Pick up the correct statement from the following:  (A) The volume of underground water extracted by gravity drainage from a saturated soil, is  known as yield  (B) The ratio of volume ... ) The sum of specific yield and specific retention, is equal to porosity  (D) All the above

Last Answer : (D) All the above

Description : Pick up the correct statement from the following: (A) The amount of water retained on the surface of soil grains by molecular attraction, is known as pellicular water (B) The degree of resistance to ... (C) The pellicular water held in any soil, is called field capacity (D) All the above

Last Answer : Answer: Option D

Description : The quantity of water retained by the sub-soil against gravity, is known (A) Yield (B) Porosity (C) Specific yield (D) Specific retention

Last Answer : Answer: Option D

Description : The ratio of the volume of water present in a given soil mass to the total volume of its voids, is known (A) Porosity (B) Void ratio (C) Percentage voids (D) Degree of saturation

Last Answer : Answer: Option D

Description : The ratio of volume of voids to the total volume of soil mass is called (A) Air content (B) Porosity (C) Percentage air voids (D) Voids ratio

Last Answer : (B) Porosity

Description : The ratio of the volume of voids to the total volume of the given soil mass, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content

Last Answer : (A) Porosity

Description : The ratio of the volume of voids to the volume of soil solids in a given soil mass, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content

Last Answer : (C) Void ratio

Description : The ratio of volume of air voids to the volume of total voids, is known as (A) Air content (B) Percentage air voids (C) Percentage voids (D) Porosity

Last Answer : Answer: Option A

Description : If n is porosity, y is specific yield and r is specific retention of any soil, the relationship which holds good, is (A) n + y + r = 1 (B) n + y = r (C) n + r = y (D) y + r = n

Last Answer : (D) y + r = n

Description : Pick up the correct statement from the following: (A) The theory of formation of concrete is based on the phenomena of formation of voids (B) The bulking of sand is taken into account while ... sand and the sand completely flooded with water, have practically the same volume (D) All the above

Last Answer : Answer: Option D

Description : Pick up the correct statement from the following: (A) The void ratio in soils is defined as the ratio of the volume of voids to the volume of solids (B) The bulk density of a soil is defined as the ... of a soil is defined as weight of solids to the total volume of the soil (D) All the above

Last Answer : Answer: Option D

Description : Pick up the correct statement from the following: (A) A highly absorptive aggregate reduces the workability of concrete considerably (B) The specific gravity of aggregate is important for the determination ... and porosity of an aggregate influence the property of the concrete (D) All the above

Last Answer : Answer: Option D

Description : If the volume of voids is equal to the volume of solids in a soil mass, then the values of porosity and voids ratio respectively are (A) 1.0 and 0.0 (B) 0.0 and 1.0 (C) 0.5 and 1.0 (D) 1.0 and 0.5

Last Answer : (C) 0.5 and 1.0

Description : The ratio of volume of air voids to the volume of voids is known as a) Percentage of air voids b) Porosity c) Degree of saturation d) Air content*

Last Answer : d) Air content*

Description : If aggregates completely pass through a sieve of size 75 mm and are retained on a sieve of size 60 mm, the particular aggregate will be flaky if its minimum dimension is less than (A) 20.5 mm (B) 30.5 mm (C) 40.5 mm (D) 50.5 mm

Last Answer : Answer: Option C

Description : Pick up the correct statement from the following: (A) Continuous grading is not necessary for obtaining a minimum of air voids (B) The omission of a certain size of aggregate is shown by ... in concrete increases the workability but also increases the liability to segregation (D) All the above

Last Answer : Answer: Option D

Description : In the method of voids for determination of the quantity of cement paste, it is assumed that (A) Voids in coarse aggregates are filled by fine aggregates (B) Voids in fine aggregates are filled by ... of fine aggregates is equal to total voids in coarse aggregates plus 10% extra (D) All the above

Last Answer : Answer: Option D

Description : The ultimate consolidation settlement of a structure resting on a soil (A) Decreases with the increase in the initial voids ratio (B) Decreases with the decrease in the plastic limit (C) Increases ... increase in the initial voids ratio (D) Increases with the decrease in the porosity of the soil

Last Answer : Answer: Option A

Description : Pick up the correct statement from the following: (A) O.M.C. refers to the moisture corresponding to the maximum point on the moisture content dry density curve (B) The line which shows moisture content dry ... void line (C) The free fall of hammer for compaction is 30.5 cm (D) All the above

Last Answer : (D) All the above

Description : Pick up the correct statement from the following: (A) The portion of pellicular water which remains unutilised, is called hygroscopic water (B) The moisture content at which permanent wilting of plants ... point (C) The moisture deficiency will be different at different points (D) All the above

Last Answer : Answer: Option D

Description : Pick out the correct statement. (A) Fanning friction factor is inversely proportional to Reynolds number always (B) The property of a randomly packed bed (with raschig rings) is given by the ratio of the ... the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Last Answer : (D) Mach number is given by the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Description : The ratio of volume of water present in a given soil sample to the total volume of voids in it is known as a) Percentage of air voids b) Degree of saturation * c) Void rat

Last Answer : b) Degree of saturation *

Description : Sensitivity of a soil can be defined as (A) Percentage of volume change of soil under saturated condition (B) Ratio of compressive strength of unconfined undisturbed soil to that of soil in a remoulded state (C) Ratio of volume of voids to volume of solids (D) None of the above

Last Answer : Answer: Option B

Description : The ratio of the weight of given volume of soil solids to the weight of an equal volume of distilled water at the given temperature, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content

Last Answer : (B) Specific gravity

Description : Pick up the correct statement from the following: (A) The void space between the soil grains, is filled partly with air and partly with water (B) In perfectly saturated soil, the voids are completely filled with water (C) In dry soil, the voids are completely filled with air (D) All the above

Last Answer : Answer: Option D

Description : The percentage of the aggregate of F.M. 2.6 to be combined with coarse aggregate of F.M. 6.8 for obtaining the aggregates of F.M. 5.4, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Last Answer : (C) 50 %

Description : Which of the following statement is correct (a) The maximum size of coarse aggregate should not exceed one fourth of the minimum dimension of the plain concrete member. (b) The maximum size of coarse ... aggregates of 40mm, 20mm and 10mm sizes are commonly used for concrete works (d) All the above

Last Answer : (d) All the above

Description : The water content of soil is defined as the ratio of (A) Volume of water to volume of given soil (B) Volume of water to volume of voids in soil (C) Weight of water to weight of air in voids (D) Weight of water to weight of solids of given mass of soil

Last Answer : Answer: Option D

Description : PROBLEM FA sample of soft saturated clay weighs 350 grams and has a volume of 205cc. After oven drying, the soil weighs 225 grams. Calculate the values of saturated unit weight, void ratio, porosity and specific gravity?

Last Answer : {

Description : If voids ratio is 0.67, water content is 0.188 and specific gravity is 2.68, the degree of saturation of the soil, is (A) 25 % (B) 40 % (C) 60 % (D) 75 %

Last Answer : Answer: Option D

Description : the water content of a fully saturated soil mass is 100%, then the voids ratio of the sample is (A) Less than specific gravity of soil (B) Equal to specific gravity of soil (C) Greater than specific gravity of soil (D) Independent of specific gravity of soil

Last Answer : Answer: Option B

Description : Pick up the correct statement from the following: (A) The free water is the amount of water added while mixing and the amount of water held on the surface of the aggregates prior to mixing (B) The total water ... actually absorbed by the aggregates (C) Neither (a) nor (b) (D) Both (a) and (b)

Last Answer : Answer: Option D

Description : Which one of following statement about Overdenture is not correct: A. Greater occlusal loads can be applied by the patient B. Retention and stability are generally better than with ... The retained roots are covered by the denture thus protecting them from caries and periodontal diseases

Last Answer : D. The retained roots are covered by the denture thus protecting them from caries and periodontal diseases

Description : A coarse-grained soil has a voids ratio 0.75, and specific gravity as 2.75. The critical gradient at which quick sand condition occurs, is (A) 0.25 (B) 0.50 (C) 0.75 (D) 1.00

Last Answer : (D) 1.00

Description : Define voids ratio and porosity.

Last Answer : Voids ratio: It is the ratio of volume of voids to volume of solids called as voids ratio. Porosity: It is the ratio of volume of voids to the total volume of soil; called as porosity.

Description : The reduction in volume of soil due to squeezing out of water from the voids, is termed (A) Primary consolidation (B) Primary compression (C) Primary time effect (D) All the above

Last Answer : Answer: Option D

Description : Pick up the correct statement from the following: (A) An increase in water content must be accompanied by an increase in cement content (B) Angular and rough aggregates reduce the workability of the ... The slump of the concrete mix decreases due to an increase in temperature (D) All the above

Last Answer : Answer: Option D

Description : Pick up the correct statement from the following: (A) Water cement paste hardens due to hydration (B) During hardening cement binds the aggregates together (C) Cement provides strength, durability and water tightness to the concrete (D) All the above

Last Answer : Answer: Option D

Description : The ratio of the weight of water to the weight of solids in a given mass of soil, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content

Last Answer : Answer: Option D

Description : The type of aggregates of same nominal size, which contain less voids when compacted, are (A) Rounded spherical (B) Irregular (C) Flaky (D) None of these

Last Answer : Answer: Option A

Description : The aggregates of __________________-shape have maximum voids (a) Irregular (b) Angular (c)Rounded (d) Flaky

Last Answer : (b) Angular

Description : The aggregates of __________________-shape have manimum voids (a) Irregular (b) Angular (c)Rounded (d) Flaky

Last Answer : (c)Rounded

Description : Pick up the incorrect statement from the following: (A) Porosity of clay sand soil is 45% (B) Porosity of pure sand is 35% (C) Porosity of sand stone is up to 15% (D) None of these

Last Answer : (D) None of these

Description : Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given ... with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : Fundamental relationship between dry density ( d), specific gravity (G), water content ( ) and percentage of air voids (na) is: (A) d = (1 - na) G (1 + ) (B) d = (1 + na) G (1 + ) (C) d = (1 + na) G (1 - ) (D) d = (1 - na) G (1 - )

Last Answer : Answer: Option A

Description : Pick up the correct statement from the following: (A) The earth work of cutting in trenches or borrow pits in fairly uniform ground is measured with the help of average depths of the dead men (B) ... a nor b is feasible, are measured from the fillings after deduction of voids (D) All the above

Last Answer : (D) All the above

Description : Pick out the correct statement. (A) A lower temperature favours the reaction of lower activation energy (B) The dispersion number for a reactor/vessel is uL/D (C) The rate controlling step in ... step (D) Pore volume and porosity of a catalyst is measured by Brunauer￾Emmett-Teller (BET) technique

Last Answer : (A) A lower temperature favours the reaction of lower activation energy

Description : Pick up the correct statement from the following: (A) The rise of the ground surface due to frost action is called frost heave (B) The freezing of water is accompanied by a volume increase of 9% (C) Below freezing point, higher soil suction develops (D) All the above

Last Answer : (D) All the above

Description : An aggregate which passes through 25 mm I.S. sieve and is retained on 20 mm sieve, is said to be flaky if its least dimension is less than (A) 22.5 mm (B) 18.5 mm (C) 16.5 mm (D) 13.5 mm

Last Answer : Answer: Option D

Description : If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, ... , the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Last Answer : Answer: Option C