Description : In value engineering, the term value refers to : (A) manufacturing cost of the product (B) selling price of the product (C) total cost of the product (D) utility of the product
Last Answer : In value engineering, the term value refers to : utility of the product
Description : Overhead refers to: (a) Direct or Prime Cost (b) All Indirect costs (c) only Factory indirect costs
Last Answer : (b) All Indirect costs
Description : Prime cost is equal to - (1) Variable cost plus administrative cost (2) Variable cost plus fixed costs (3) Variable cost only (4) Fixed cost only
Last Answer : (1) Variable cost plus administrative cost Explanation: Prime Cost refers to a business's expenses for the materials and labor it uses in production. Prime cost is a way of measuring the total cost ... the activity of a business. Variable cost is the sum of marginal costs over all units produced.
Description : Prime cost is equal to (1) Variable cost plus administrative cost (2) Variable cost plus fixed costs (3) Variable cost only (4) Fixed cost only
Last Answer : Variable cost plus administrative cost
Description : The most suitable refrigerant for a commercial ice plant is : (A) brine (B) NH3 (C) Freon (D) air
Last Answer : Ammonia NH3
Description : Dew point temperature is constant as long as there is : (A) no change in moisture content of the air (B) no change in volume of air (C) no change in dry bulb and wet bulb temperature (D) no change in relative and specific humidity of air
Last Answer : Dew point temperature is constant as long as there is : no change in moisture content of the air
Description : The comfort conditions in air conditioning are : (A) 22 ºC dry bulb temperature and 60% relative humidity (B) 25 ºC dry bulb temperature and 100% relative humidity (C) 20º C dry bulb temperature and 75% relative humidity (D) 15º C bulb temperature and 80% relative humidity
Last Answer : The comfort conditions in air conditioning are : 22 ºC dry bulb temperature and 60% relative humidity
Description : Air is normally dehumidified by : (A) injecting water (B) passing steam (C) heating (D) cooling
Last Answer : 1
Description : A fluid in equilibrium cannot sustain : (A) tensile stress (B) compressive stress (C) shear stress (D) bending stress
Last Answer : A fluid in equilibrium cannot sustain : shear stress
Description : Euler’s dimensionless number relates the following : (A) Inertial force and gravity (B) Viscous force and Inertial force (C) Pressure force and Inertial force (D) Pressure force and viscous force
Last Answer : Euler’s dimensionless number relates the following : Pressure force and Inertial force
Description : Power transmitted through a pipe is maximum when the loss of head due to friction is : (A) one-half of the total head supplied (B) one-third of the total head supplied (C) one-fourth of the total head supplied (D) zero
Last Answer : Power transmitted through a pipe is maximum when the loss of head due to friction is : one-third of the total head supplied
Description : The efficiency of a centrifugal pump is maximum when its blades are : (A) straight (B) bent forward (C) bent backward (D) bent forward first and then backward
Last Answer : The efficiency of a centrifugal pump is maximum when its blades are : bent backward
Description : In axial flow fans and turbines, fluid enters and leaves as follows : (A) radially, axially (B) axially, radially (C) axially, axially (D) radially, radially
Last Answer : In axial flow fans and turbines, fluid enters and leaves as follows : (A) radially, axially (B) axially, radially (C) axially, axially (D) radially, radially
Description : Military type of organisation is known as : (A) line organisation (B) functional organisation (C) line and staff organisation (D) line, staff and functional organisation
Last Answer : Military type of organisation is known as : line organisation
Description : A systematic job improvement sequence will consist of : (A) motion study (B) time study (C) job enrichment (D) all of these
Last Answer : A systematic job improvement sequence will consist of : (A) motion study (B) time study (C) job enrichment (D) all of these
Description : In inventory control theory, the economic order quantity is : (A) average level of inventory (B) optimum lot size (C) capacity of a warehouse (D) lost size corresponding to break-even analysis
Last Answer : In inventory control theory, the economic order quantity is : optimum lot size
Description : The main object of scientific layout is : (A) to produce better quality of product (B) to utilise maximum floor area (C) to minimise production delays (D) all of these
Last Answer : The main object of scientific layout is : (A) to produce better quality of product (B) to utilise maximum floor area (C) to minimise production delays (D) all of these
Description : Gantt chart is used for : (A) inventory control (B) material handling (C) production schedule (D) machine repair schedules
Last Answer : Gantt chart is used for : production schedule
Description : A twist drill is a : (A) side cutting tool (B) front cutting tool (C) end cutting tool (D) none of these
Last Answer : A twist drill is a : end cutting tool
Description : Tool life is most affected by : (A) cutting speed (B) tool geometry (C) feed and depth (D) microstructure of material being cut
Last Answer : Tool life is most affected by : cutting speed
Description : The usual ratio of forward and return stroke in shaper is : (A) 2:1 (B) 1:2 (C) 2:3 (D) 3:2
Last Answer : The usual ratio of forward and return stroke in shaper is : 3:2
Description : Binding material used in cemented carbide tools is : (A) Nickel (B) Cobalt (C) Chromium (D) Silicon
Last Answer : Binding material used in cemented carbide tools is : Cobalt
Description : Angle between the shear plane and work surface is known as : (A) lip angle (B) rake angle (C) cutting angle (D) shear angle
Last Answer : Angle between the shear plane and work surface is known as : shear angle
Description : Material having highest cutting speed is : (A) Cast iron (B) Bronze (C) Aluminium (D) High carbon steel
Last Answer : Material having highest cutting speed is : Aluminium
Description : If the rotating mass of a rim type flywheel is distributed on another rim type flywheel whose mean radius is half the mean radius of the former, then the energy stored in the latter at the same speed will be : ... at the first one (C) One fourth of the first one (D) One and half times the first one
Last Answer : If the rotating mass of a rim type flywheel is distributed on another rim type flywheel whose mean radius is half the mean radius of the former, then the energy stored in the latter at the same speed will be : One fourth of the first one
Description : The train value of a gear train is : (A) equal to velocity ratio (B) reciprocal of velocity ratio (C) always greater than unity (D) none of the above
Last Answer : The train value of a gear train is : reciprocal of velocity ratio
Description : The ratio of maximum displacement of the forced vibration to the deflection due to static force is known as : (A) Damping Factor (B) Damping Coefficient (C) Logarithmic Decrement (D) Magnification Factor
Last Answer : Magnification Factor
Description : Two metallic blocks having masses in the ratio 2:3 are made to slide down a frictionless inclined plane starting from rest position. When the blocks reach the bottom of the inclined plane, they will have their kinetic energies in the ratio : (A) 2:3 (B) 3:5 (C) 3:2 (D) 7:4
Last Answer : Two metallic blocks having masses in the ratio 2:3 are made to slide down a frictionless inclined plane starting from rest position. When the blocks reach the bottom of the inclined plane, they will have their kinetic energies in the ratio : 2:3
Description : A casting defect which occurs near the ingates as rough lumps on the surface of a casting is known as 1. Shift 2. Sand wash 3. Swell 4. Scab
Last Answer : A casting defect which occurs near the ingates as rough lumps on the surface of a casting is known as Sand wash
Description : The property of sand due to which the sand grains stick together, is called 1. Collapsibility 2. Permeability 3. Cohesiveness 4. Adhesiveness
Last Answer : The property of sand due to which the sand grains stick together, is called Cohesiveness
Description : In die casting, machining allowance is 1. Small 2. Large 3. Very large 4. Not provided
Last Answer : In die casting, machining allowance is Not provided
Description : The mode of deformation of the metal during spinning is 1.Bending 2.Stretching 3.Bending and stretching 4.Rolling and stretching
Last Answer : The mode of deformation of the metal during spinning is Bending and stretching
Description : Structural sections such as rails, angles, I-beams are made by 1. Hot rolling 2. Hot drawing 3. Hot piercing 4. Hot extrusion
Last Answer : Structural sections such as rails, angles, I-beams are made by Hot rolling
Description : The process extensively used for making bolts and nuts is 1. Hot piercing 2. Extrusion 3. Cold peening 4. Cold heading
Last Answer : The process extensively used for making bolts and nuts is Cold heading
Description : The cold chisels are made by 1. Drawing 2. Rolling 3. Forging 4. Piercing
Last Answer : The cold chisels are made by Forging
Description : Welding of glass is done by 1. Ultrasonic welding 2. Electron beam welding 3. Laser beam welding 4. Explosive welding
Last Answer : Welding of glass is done by Laser beam welding
Description : Linde welding uses 1.Neutral flame and rightward technique 2.Carburizing flame and rightward technique 3.Neutral flame and leftward technique 4.Oxidizing flame and leftward technique
Last Answer : Linde welding uses Carburizing flame and rightward technique
Description : Gross profit is equal to 1. selling price minus purchase price 2. selling price minus purchase price plus depreciation 3. depreciation plus unsold stock minus purchase price 4. purchase price minus production cost 5. None of these
Last Answer : selling price minus purchase price
Description : Sub-prime lending refers to ________ A. lending done by banks at rates below PLR B. Funds raised by the banks at sub-libor rates C. Group of banks which are not rated as ... institutions including banks to customers not meeting with normally required credit appraisal standards E. All of the Above
Last Answer : D. lending done by financing institutions including banks to customers not meeting with normally required credit appraisal standards Explanation: In finance, subprime lending (also referred to ... schedule, sometimes reflecting setbacks, such as unemployment, divorce, medical emergencies, etc.
Description : The word "Computer" usually refers to the Central Processing Unit plus: a) Input Devices b) External Memory c) Internal Memory d) None of The Above
Last Answer : c) Internal Memory
Description : If the equation x2 minus ax plus 2b equals 0 has prime roots where a and b are positive integers then a minus b is equal to?
Last Answer : I think you mean the roots are prime numbers.Let the two roots be primes p and qThen the equation factorises to (x - p)(x - q) = 0 which can beexpanded to give:x² - (p + q)x + pq = 0Which comparing ... = 2(It doesn't matter if the other prime is even (2) or not as itcancels out from a - b.)
Description : Production function refers to the functional relationship between input and _______. (1) product (2) produce (3) output (4) service
Last Answer : (3) output Explanation: The Production function expresses a functional relationship amidst quantities of raw materials and goods. It is the name given to the relationship between rates of input of productive services and the rate of output of product.
Description : Production refers to - (1) destruction of utility (2) creation of utilities (3) exchange value (4) use of a product
Last Answer : (2) creation of utilities Explanation: Production refers to "the creation of utility having value-in-exchange." The process of production may create six types of utilities: form utility, time utility, place utility, ownership utility, service utility and knowledge utility.
Description : 'Capital gains' refers to goods which - (1) serve as a source of raising further capital (2) help in the further production of goods (3) directly go into the satisfaction of human wants (4) find multiple uses
Last Answer : (2) help in the further production of goods Explanation: Capital goods are goods that are used in producing other goods, rather than being bought by consumers. They are tangible assets such as ... uses to produce goods or services in order to produce consumer goods and goods for other businesses.
Description : 'Operation Flood' refers to – (1) increase in the production of milk (2) increase in the production of dairy products (3) controlling flood (4) increasing the production of agricultural crops
Last Answer : (1) increase in the production of milk Explanation: Operation Flood in India, a project of the National Dairy Development Board (NDDB) was the world's biggest dairy development programme which made India, ... the world, surpassing the USA in 1998, with about 17 percent of global output in 2010-11.
Description : Intensive cultivation refers to (1) production with intensive use of labour (2) production with intensive use of fertilizer (3) raising production by intensive use of existing land (4) raising production by large scale use of imported inputs
Last Answer : (3) raising production by intensive use of existing land Explanation: Intensive farming is an agricultural intensification and mechanization system that aims to maximize yields from available land through various ... of inputs such as capital and labour, and higher crop yields per unit land area.
Description : Golden Revolution in India refers to growth of - (1) Militancy in the northeast (2) Oilseeds production (3) Horticulture (4) Increased importing of gold
Last Answer : (2) Oilseeds production Explanation: The government's efforts to increase production of fruits, honey and horticultural development is referred to as Golden Revolution. Oil Seeds production is related to Yellow Revolution.
Description : In nursery production, a “liner” refers to __________. a. A plastic bag b. A rooted cutting or small seedling c. A type of garden tool d. A plastic mulch covering
Last Answer : A rooted cutting or small seedling
Description : An increase in the number of new cells in an organ or tissue that is reversible when the stimulus for production of new cells is removed is termed a) Hyperplasia. Hyperplasia occurs as cells multiply ... in the number of new cells in an organ or tissue continues after the stimulus is removed.
Last Answer : a) Hyperplasia. Hyperplasia occurs as cells multiply and are subjected to increased stimulation resulting in tissue mass enlargement.
Description : The ________ of the product mix refers to how closely related the various product lines are in end use, production requirements, distribution channels, or some other way. A. Consistency B. Depth C. Width D. Length
Last Answer : A. Consistency