The safe stopping sight distance D, may be computed from the equation (A) D = 0.278 Vt + V²/254f (B) D = 0.254 Vt + V²/278f (C) D = 0.254 Vt + V²/225f (D) D = 0.225 Vt + V²/254f

The safe stopping sight distance D, may be computed from the equation
(A) D = 0.278 Vt + V²/254f
(B) D = 0.254 Vt + V²/278f
(C) D = 0.254 Vt + V²/225f
(D) D = 0.225 Vt + V²/254f
by

1 Answer

Answer :

Answer: Option A
by

Related questions

The correct formula for calculating super-elevation for the hill roads, is (A) e = V²/254 R (B) e = V²/225 R (C) e = V²/278 R (D) e = V²/114 R

Description : The correct formula for calculating super-elevation for the hill roads, is (A) e = V²/254 R (B) e = V²/225 R (C) e = V²/278 R (D) e = V²/114 R

Last Answer : Answer: Option B

If V is the velocity in kmph, t the stopping distance S of the vehicle, is (A) 0.28V²t + V/0.01 (B) 0.28Vt + V²/0.1 (C) 0.28Vt + 0.01 (D) 0.28Vt + 0.01 V²/

Description : If V is the velocity in kmph, t the stopping distance S of the vehicle, is (A) 0.28V²t + V/0.01 (B) 0.28Vt + V²/0.1 (C) 0.28Vt + 0.01 (D) 0.28Vt + 0.01 V²/

Last Answer : Answer: Option C

If V is speed in km/hour and R is radius of the curve, the super-elevation e is equal to (A) V²/125 R (B) V²/225 R (C) V²/325 R

Description : If V is speed in km/hour and R is radius of the curve, the super-elevation e is equal to (A) V²/125 R (B) V²/225 R (C) V²/325 R

Last Answer : Answer: Option B

If V is the design speed in km/hour and R is the radius of the curve of a hill road, the super￾elevation (A) e = V / 127 R (B) e = V² / 127 R (C) e = V ²/ 225 R (D) e = V / 225 R

Description : If V is the design speed in km/hour and R is the radius of the curve of a hill road, the super￾elevation (A) e = V / 127 R (B) e = V² / 127 R (C) e = V ²/ 225 R (D) e = V / 225 R

Last Answer : Answer: Option C

The absolute minimum sight distance required for stopping a vehicle moving with a speed of 80 kmph, is (A) 120 m (B) 200 m (C) 640 m (D) None of these

Description : The absolute minimum sight distance required for stopping a vehicle moving with a speed of 80 kmph, is (A) 120 m (B) 200 m (C) 640 m (D) None of these

Last Answer : Answer: Option A

If L is the length of vehicles in metres, C is the clear distance between two consecutive vehicles (stopping sight distance), V is the speed of vehicles in km/hour, the maximum number N of vehicles/hour, is (A) N = 1000 V / (L + C) (B) N = (L + C) / 1000 V (C) N = 1000 L / (C + V) (D) N = 1000 C / (L + V)

Description : If L is the length of vehicles in metres, C is the clear distance between two consecutive vehicles (stopping sight distance), V is the speed of vehicles in km/hour, the maximum number N of vehicles/hour, is (A) N = 1000 V / (L + C ... ) / 1000 V (C) N = 1000 L / (C + V) (D) N = 1000 C / (L + V)

Last Answer : Answer: Option A

The distance travelled by a moving vehicle during perception and brake reaction times, is known as (A) Sight distance (B) Stopping distance (C) Lag distance (D) None of these

Description : The distance travelled by a moving vehicle during perception and brake reaction times, is known as (A) Sight distance (B) Stopping distance (C) Lag distance (D) None of these

Last Answer : Answer: Option C

For night travel, the length of a valley curve should be such that the head light beam distance is the same as (A) Stopping sight distance (B) Overtaking sight distance (C) Sum of (a) and (b) (D) Difference of (a) and (b)

Description : For night travel, the length of a valley curve should be such that the head light beam distance is the same as (A) Stopping sight distance (B) Overtaking sight distance (C) Sum of (a) and (b) (D) Difference of (a) and (b)

Last Answer : Answer: Option A

You are working with three networks that have the network IDs 192.168.5.0, 192.168.6.0, and192.168.7.0. What subnet mask can you use to combine these addresses intoone? A. 255.255.252.0 B. 225.255.254.0 C. 255.255.255.240 D. 255.255.255.252

Description : You are working with three networks that have the network IDs 192.168.5.0, 192.168.6.0, and192.168.7.0. What subnet mask can you use to combine these addresses intoone? A. 255.255.252.0 B. 225.255.254.0 C. 255.255.255.240 D. 255.255.255.252

Last Answer : 255.255.252.0

A back sight (A) Is always taken on a point of known elevation or can be computed (B) Is added to the known level to obtain the instrument height (C) Taken on an inverted staff is treated as negative (D) All the above

Description : A back sight  (A) Is always taken on a point of known elevation or can be computed  (B) Is added to the known level to obtain the instrument height  (C) Taken on an inverted staff is treated as negative  (D) All the above 

Last Answer : (D) All the above 

Define i) Stopping Sight distance ii) Overtaking sight distance

Description : Define i) Stopping Sight distance ii) Overtaking sight distance

Last Answer : i) Stopping Sight Distance: SSD may be defined as the length of highway required to bring a vehicle to stop at various design speeds when the eye of the driver is 1200mm above the ... a vehicle intending to overtake the slow vehicle ahead safely against the traffic in the opposite direction. 

According to Bernoulli's equation (A) Z + p/w + v²/2g = constant (B) Z + p/w - v²/2g = constant (C) Z - p/w + v²/2g = constant (D) Z - p/w - v²/2g = constant

Description : According to Bernoulli's equation (A) Z + p/w + v²/2g = constant (B) Z + p/w - v²/2g = constant (C) Z - p/w + v²/2g = constant (D) Z - p/w - v²/2g = constant

Last Answer : Answer: Option A

If N is deviation angle, the length L, of a parabolic vertical curve for safe stopping distance S, is(A) NS²/4.4 if L > S(B) 2S - 4.4/N if L < S(C) 2S - 4.4/N if L > S(D) Both (a) and (b)

Description : If N is deviation angle, the length L, of a parabolic vertical curve for safe stopping distance S, is (A) NS²/4.4 if L > S (B) 2S - 4.4/N if L < S (C) 2S - 4.4/N if L > S (D) Both (a) and (b)

Last Answer : Answer: Option D

A bus can travel 25% faster than a jeep. Both start from point P at the same time and reach point Q, 225 kms away from P, at the same time. On the way, however, the bus lost about 37.5 minutes while stopping at the certain place. What is the speed of the jeep? a) 64 km/hr b) 72 km/hr c) 68 km/hr d) 56 km/hr

Description : A bus can travel 25% faster than a jeep. Both start from point P at the same time and reach point Q, 225 kms away from P, at the same time. On the way, however, the bus lost about 37.5 minutes while stopping at the ... is the speed of the jeep? a) 64 km/hr b) 72 km/hr c) 68 km/hr d) 56 km/hr

Last Answer : B Let speed of the jeep =x kmph Then, speed of the bus =(100+25)x/100 =125x/100 =5x/4 kmph Time taken by the jeep to travel from P to Q =225/x hours Time taken by the bus to travel from p to Q =225/(5x/4) + ... 225/x=900/5x+37.5/60 225/x=180/x+37.5/60 45/x =37.5/60 37.5x=45*60 X=72 km/hr

The maximum safe speed on roads, depends on the (A) Type of road surface (B) Type of curves (C) Sight distance (D) All the above

Description : The maximum safe speed on roads, depends on the (A) Type of road surface (B) Type of curves (C) Sight distance (D) All the above

Last Answer : Answer: Option D

The lens equation 1/f = 1/ + 1/ is applicable (A) When the thickness of the lens is small (B) Only to conjugate distances along the principal axis (C) The computed quantities are accurate enough for geometrical optics of simple distances (D) All the above

Description : The lens equation 1/f = 1/ + 1/ is applicable (A) When the thickness of the lens is small (B) Only to conjugate distances along the principal axis (C) The computed quantities are accurate enough for geometrical optics of simple distances (D) All the above

Last Answer : (D) All the above

The distance between terminal points computed from a subsidiary traverse run between them, is generally known, as (A) Traverse leg (B) A base (C) Traverse base (D) All the above

Description : The distance between terminal points computed from a subsidiary traverse run between them, is generally known, as (A) Traverse leg (B) A base (C) Traverse base (D) All the above

Last Answer : (C) Traverse base

The loss of head at entrance in a pipe is (where v = Velocity of liquid in the pipe) (A) v²/2g (B) 0.5v²/2g (C) 0.375v²/2g (D) 0.75v²/2g

Description : The loss of head at entrance in a pipe is (where v = Velocity of liquid in the pipe) (A) v²/2g (B) 0.5v²/2g (C) 0.375v²/2g (D) 0.75v²/2g

Last Answer : Answer: Option B

The loss of head at exit of a pipe is (where v = Velocity of liquid in the pipe) (A) v²/2g (B) 0.5v²/2g (C) 0.375v²/2g (D) 0.75v²/2g

Description : The loss of head at exit of a pipe is (where v = Velocity of liquid in the pipe) (A) v²/2g (B) 0.5v²/2g (C) 0.375v²/2g (D) 0.75v²/2g

Last Answer : Answer: Option A

Non-passing sight distance along a road is the longest distance at which the driver of a moving vehicle, may see an obstacle on the pavement (A) 10 cm high (B) 25 cm high (C) 50 cm high (D) 100 cm high

Description : Non-passing sight distance along a road is the longest distance at which the driver of a moving vehicle, may see an obstacle on the pavement (A) 10 cm high (B) 25 cm high (C) 50 cm high (D) 100 cm high

Last Answer : Answer: Option A

Minimum stopping distance for moving vehicles on road with a design speed of 80 km/hour, is (A) 80 m (B) 100 m (C) 120 m (D) 150 m

Description : Minimum stopping distance for moving vehicles on road with a design speed of 80 km/hour, is (A) 80 m (B) 100 m (C) 120 m (D) 150 m

Last Answer : Answer: Option C

If the velocity of moving vehicles on a road is 24 km/per hour, stopping distance is 19 metres and average length of vehicles is 6 metres, the basic capacity of lane, is (A) 500 vehicles per hour (B) 700 vehicles per hour (C) 1000 vehicles per hour (D) 1250 vehicles per hour

Description : If the velocity of moving vehicles on a road is 24 km/per hour, stopping distance is 19 metres and average length of vehicles is 6 metres, the basic capacity of lane, is (A) 500 vehicles per hour (B) 700 vehicles per hour (C) 1000 vehicles per hour (D) 1250 vehicles per hour

Last Answer : Answer: Option C

If C is basic capacity per lane, V is velocity in km/hour, S is stopping distance plus length of the vehicles in metres, the formula C = 1000V/S is applicable to (A) District roads (B) Two lane roads (C) Two lane roads in one direction (D) None of these

Description : If C is basic capacity per lane, V is velocity in km/hour, S is stopping distance plus length of the vehicles in metres, the formula C = 1000V/S is applicable to (A) District roads (B) Two lane roads (C) Two lane roads in one direction (D) None of these

Last Answer : Answer: Option C

With usual notations, the expression V²/gR represents (A) Centrifugal force (B) Centrifugal ratio (C) Super elevation (D) Radial acceleration

Description : With usual notations, the expression V²/gR represents  (A) Centrifugal force  (B) Centrifugal ratio  (C) Super elevation  (D) Radial acceleration 

Last Answer : (B) Centrifugal ratio

A car is travelling at 90 km/hour on a rough road where the coefficient of friction between the road and the tyre is 0.5. The distance the car will skid before stopping when the brakes are jammed suddenly would be a.127.4 m b.95.55 m c.63.7 m d.31.85 m e.90 m

Description : A car is travelling at 90 km/hour on a rough road where the coefficient of friction between the road and the tyre is 0.5. The distance the car will skid before stopping when the brakes are jammed suddenly would be a.127.4 m b.95.55 m c.63.7 m d.31.85 m e.90 m

Last Answer : c. 63.7 m

Stopping distance of vehicles : When brakes are applied to a moving vehicle, the distance it travels before stopping is called stopping distance. It is an important factor for road safety and depends on the initial velocity ( v 0 ) and the braking capacity, or deceleration, ?a that is caused by the braking. A car travelling at speed 72km/hr suddenly applies the brake with the deceleration of 5m/s2. Find the stopping distance of the car -Science

Description : Stopping distance of vehicles : When brakes are applied to a moving vehicle, the distance it travels before stopping is called stopping distance. It is an important factor for road safety and depends on ... the brake with the deceleration of 5m/s2. Find the stopping distance of the car -Science

Last Answer : Here u=72 km/hr = 72×10003600m/s=2072×10003600m/s=20 m/s , v=0 a= -5 m/s2 Now using the relation v2=u2+2asv2=u2+2as 0=(20)2+2×(−5)×s0=(20)2+2×(−5)×s s=40ms=40m

The difference of level between a point below the plane of sight and one above, is the sum of two staff readings and an error would be produced equal to (A) The distance between the zero of gradient and the foot of the staff (B) Twice the distance between the zero of graduation and the foot of the staff (C) Thrice the distance between the zero of graduation and the foot of the staff (D) None of the above

Description : The difference of level between a point below the plane of sight and one above, is the sum of two staff readings and an error would be produced equal to (A) The distance between the zero of ... Thrice the distance between the zero of graduation and the foot of the staff (D) None of the above

Last Answer : (B) Twice the distance between the zero of graduation and the foot of the staff

If N is deviation angle the length L of a parabolic vertical curve for overtaking sight distance S, is (A) NS²/9.6 if L > S (B) NS²/9.6 if L < S (C) 2S - 9.6/N if L < S (D) Both (A) and (C)

Description : If N is deviation angle the length L of a parabolic vertical curve for overtaking sight distance S, is (A) NS²/9.6 if L > S (B) NS²/9.6 if L < S (C) 2S - 9.6/N if L < S (D) Both (A) and (C)

Last Answer : Answer: Option D

If N is the algebraic difference of grades, S is the minimum sight distance in metres, the length (L) of a summit curve is (A) NS/4 (B) NS²/4 (C) N²S/4(D) (NS)²/4

Description : If N is the algebraic difference of grades, S is the minimum sight distance in metres, the length (L) of a summit curve is (A) NS/4 (B) NS²/4 (C) N²S/4 (D) (NS)²/4

Last Answer : Answer: Option B

While calculating the overtaking sight distance, the height of the object above road surface, is assumed (A) 50 cm (B) 75 cm (C) 100 cm (D) 120 cm

Description : While calculating the overtaking sight distance, the height of the object above road surface, is assumed (A) 50 cm (B) 75 cm (C) 100 cm (D) 120 cm

Last Answer : Answer: Option D

Design of horizontal and vertical alignments, super-elevation, sight distance and grades, is worst affected by (A) Width of the vehicle (B) Length of the vehicle (C) Height of the vehicle (D) Speed of the vehicle

Description : Design of horizontal and vertical alignments, super-elevation, sight distance and grades, is worst affected by (A) Width of the vehicle (B) Length of the vehicle (C) Height of the vehicle (D) Speed of the vehicle

Last Answer : Answer: Option D

If N is the net difference of grades, S is the minimum overtaken sight distance in metres, the length (L) of a summit curve, is (A) NS/4 (B) NS²/4 (C) NS²/4.8 (D) NS²/9.6

Description : If N is the net difference of grades, S is the minimum overtaken sight distance in metres, the length (L) of a summit curve, is (A) NS/4 (B) NS²/4 (C) NS²/4.8 (D) NS²/9.6

Last Answer : Answer: Option D

Length of vehicles does not affect (A) Extra widening (B) Minimum radius of turning (C) Passing sight distance (D) Width of shoulders

Description : Length of vehicles does not affect (A) Extra widening (B) Minimum radius of turning (C) Passing sight distance (D) Width of shoulders

Last Answer : Answer: Option D

If the axial length of a drainage basin is 35 km and its form factor is 0.2, the total area of the basin is (A) 205 sq. km. (B) 215 sq. km. (C) 225 sq. km. (D) 245 sq. km.

Description : If the axial length of a drainage basin is 35 km and its form factor is 0.2, the total area of the basin is (A) 205 sq. km. (B) 215 sq. km. (C) 225 sq. km. (D) 245 sq. km.

Last Answer : Answer: Option D

Extra widening required at a horizontal curve on a single lane hill road of radius 80 m for a design speed of 50 km ph and for a vehicle with wheel base 6.0 m is (A) 0.225 m (B) 0.589 m (C) 1.250 m (D) None of these

Description : Extra widening required at a horizontal curve on a single lane hill road of radius 80 m for a design speed of 50 km ph and for a vehicle with wheel base 6.0 m is (A) 0.225 m (B) 0.589 m (C) 1.250 m (D) None of these

Last Answer : Answer: Option B

Over taking time required for a vehicle with design speed 50 km ph and overtaking acceleration 1.25 m/sec2 to overtake a vehicle moving at a speed 30 km ph, is (A) 5.0 secs (B) 6.12 secs (C) 225.48 secs (D) 30 secs

Description : Over taking time required for a vehicle with design speed 50 km ph and overtaking acceleration 1.25 m/sec2 to overtake a vehicle moving at a speed 30 km ph, is (A) 5.0 secs (B) 6.12 secs (C) 225.48 secs (D) 30 secs

Last Answer : Answer: Option B

What number is 7 times as big as 278?

Description : What number is 7 times as big as 278?

Last Answer : 1946

What is the average velocity of atoms in 1.50 mol of neon at 278 k?

Description : What is the average velocity of atoms in 1.50 mol of neon at 278 k?

Last Answer : What is the answer ?

What is 278 457 rounded to the nearest ten thousand?

Description : What is 278 457 rounded to the nearest ten thousand?

Last Answer : If you mean 278,447 then it is 280,000 to the nearest tenthousand

Which is longer 278 inches or 8 yards?

Description : Which is longer 278 inches or 8 yards?

Last Answer : 8 yards is 10 inches longer8 x 3 x 12 = 24 x 12 = 240 + 48 = 288 = 278 + 10

The financial relations between the Union Government and States have been discussed under. (1) Article 168 to 171 (2) Article 268 to 281 (3) Article 278 to 291 (4) Article 289 to 295

Description : The financial relations between the Union Government and States have been discussed under. (1) Article 168 to 171 (2) Article 268 to 281 (3) Article 278 to 291 (4) Article 289 to 295

Last Answer : (2) Article 268 to 281 Explanation: The financial relations between Union Government and State Government or more specifically distribution of revenues between the Union and the States have been discussed under Articles 268 to(1) 281 of the Indian Constitution

When a voltage of 115 VDC is applied to the illustrated circuit with a resistance of 32 ohms the current will be _______. EL-0018 A. 278.26 amps B. 147.00 amps C. 8.90 amps D. 3.59 amps

Description : When a voltage of 115 VDC is applied to the illustrated circuit with a resistance of 32 ohms the current will be _______. EL-0018 A. 278.26 amps B. 147.00 amps C. 8.90 amps D. 3.59 amps

Last Answer : Answer: D

The maximum propagation delay of a geostationary satellite is A. 278 ms B. 239 ms C. 300 ms D. 250 ms

Description : The maximum propagation delay of a geostationary satellite is A. 278 ms B. 239 ms C. 300 ms D. 250 ms

Last Answer : A. 278 ms

What is the minimum propagation delay of a geostationary satellite? A. 278 ms B. 239 ms C. 300 ms D. 600 ms

Description : What is the minimum propagation delay of a geostationary satellite? A. 278 ms B. 239 ms C. 300 ms D. 600 ms

Last Answer : B. 239 ms

Convert decimal 19 to octal. 130) A) 278 B) 218 C) 238 D) 178

Description : Convert decimal 19 to octal. 130) A) 278 B) 218 C) 238 D) 178

Last Answer : C) 238

In a block, the prefix length is /15; what is the mask? A) 255.254.0.0 B) 255.255.255.0 C) 255.255.255.128 D) none of the above

Description : In a block, the prefix length is /15; what is the mask? A) 255.254.0.0 B) 255.255.255.0 C) 255.255.255.128 D) none of the above

Last Answer : 255.254.0.0

Which one is nota contiguous mask? A) 255.255.255.254 B) 255.255.224.0 C) 255.148.0.0 D) all are

Description : Which one is nota contiguous mask? A) 255.255.255.254 B) 255.255.224.0 C) 255.148.0.0 D) all are

Last Answer : 255.148.0.0

What is the resultof ANDing 254 and 15? A) 254 B) 14 C) 0 D) none of the above

Description : What is the resultof ANDing 254 and 15? A) 254 B) 14 C) 0 D) none of the above

Last Answer : 14

You havea class A network address 10.0.0.0 with 40subnets,but arerequiredto add 60 new subnets very soon. You would like to still allow for the largest possible number of host IDs per subnet. Which subnet mask should youassign? A. 255.240.0.0 B. 255.248.0.0 C. 255.252.0.0 D. 255.254.0.0 E. 255.255.255.255

Description : You havea class A network address 10.0.0.0 with 40subnets,but arerequiredto add 60 new subnets very soon. You would like to still allow for the largest possible number of host IDs per subnet. Which subnet mask should youassign? A. ... B. 255.248.0.0 C. 255.252.0.0 D. 255.254.0.0 E. 255.255.255.255

Last Answer : 255.254.0.0

Given the address 172.16.2.120 and the subnet mask of 255.255.255.0. How many hosts are available? * 254 * 510 * 126 * 16,372

Description : Given the address 172.16.2.120 and the subnet mask of 255.255.255.0. How many hosts are available? * 254 * 510 * 126 * 16,372

Last Answer : 254