Description : In a lemniscate curve the ratio of the angle between the tangent at the end of the polar ray and the straight, and the angle between the polar ray and the straight, is (A) 2 (B) 3 (C) 4/3 (D) 3/2
Last Answer : (D) 3/2
Description : The maximum radial distance of a Lemniscate curve, having maximum polar angle a, is (A) 3 R (B) 3 R sin2 (C) 3 R (D) 3 R
Last Answer : Answer: Option C
Description : If a Lemniscate curve of transition throughout is introduced to connect two parallel roads, the maximum polar angle of the curve, is (A) 10° (B) 15° (C) 20° (D) 30°
Last Answer : Answer: Option D
Description : A lemniscate curve will not be transitional throughout, if its deflection angle, is (A) 45° (B) 60° (C) 90° (D) 120°
Last Answer : (A) 45°
Description : Setting out of Lemniscate transition curves, is done with (A) Perpendicular offsets (B) Radial offsets (C) Deflection angles (D) Polar deflection angles
Description : The properties of autogenous curve for automobiles are given by (A) True spiral (B) Cubic parabola (C) Bernoulli's Lemniscate (D) Clothoid spiral
Last Answer : (C) Bernoulli's Lemniscate
Description : If the length of a transition curve to be introduced between a straight and a circular curve of radius 500 m is 90 m, the maximum deflection angle to locate its junction point, is (A) 1°43' 08" (B) 1°43' 18" (C) 1°43' 28" (D) 1°43' 38"
Last Answer : (C) 1°43' 28"
Description : If N is deviation angle the length L of a parabolic vertical curve for overtaking sight distance S, is (A) NS²/9.6 if L > S (B) NS²/9.6 if L < S (C) 2S - 9.6/N if L < S (D) Both (A) and (C)
Description : If N is deviation angle, the length L, of a parabolic vertical curve for safe stopping distance S, is (A) NS²/4.4 if L > S (B) 2S - 4.4/N if L < S (C) 2S - 4.4/N if L > S (D) Both (a) and (b)
Description : Pick up the correct statement from the following: (A) Long tangent sections exceeding 3 km in length should be avoided (B) Curve length should be at least 150 metres for a deflection angle of 5 ... decrease in the deflection angle, 30 metre length of curve to be increased (D) All the above
Description : If is the length of a sub-chord and is the radius of simple curve, the angle of deflection between its tangent and sub-chord, in minutes, is equal to (A) 573 S/R (B) 573 R/S (C) 1718.9 R/S (D) 1718.9 S/R
Last Answer : (D) 1718.9 S/R
Description : If the long chord and tangent length of a circular curve of radius R are equal the angle of deflection, is (A) 30° (B) 60° (C) 90° (D) 120°
Last Answer : D
Description : For a curve of radius 100 m and normal chord 10 m, the Rankine's deflection angle, is (A) 0°25'.95 (B) 0°35'.95 (C) 1°25'.53 (D) 2°51'.53
Last Answer : (D) 2°51'.53
Description : Rankine's deflection angle in minutes is obtained by multiplying the length of the chord by (A) Degree of the curve (B) Square of the degree of the curve (C) Inverse of the degree of the curve (D) None of these
Last Answer : (A) Degree of the curve
Description : The type of transition curves generally provided on hill roads, is (A) Circular (B) Cubic parabola (C) Lemniscate (D) Spiral
Description : Explain the setting of curve by Rankine’s deflection angle method.
Last Answer : Rankine's deflection angle Method:- 1) Set up theodolite at first tangent point, T1 and level it carefully, set the vernier A to 3600 2) bisect the ranging rod at the point of ... . The angle thus obtained will be set on the vernier of the theodolite for setting out the curve.
Description : Rotor shaft of a large electric motor supported between short bearings at both ends shows a deflection of 1.8 mm in middle of motor. Assuming rotor to be perfectly balanced and supported at knife edges at both ends, likely critical speed (rpm) of shaft isA 350 B 4430 C 705 D 2810
Last Answer : C 705
Description : In a right angle bend of a road provided with a transition throughout, the maximum polar angle will be (A) 10° (B) 15° (C) 20° (D) 30°
Last Answer : Answer: Option B
Description : A simply supported uniform rectangular bar breadth b, depth d and length L carries an isolated load W at its mid-span. The same bar experiences an extension e under same tensile load. The ratio of the maximum deflection to the ... (A) L/d (B) L/2d (C) (L/2d)² (D) (L/3d)²
Last Answer : (C) (L/2d)
Description : The ratio of the maximum deflection of a cantilever beam with an isolated load at its free end and with a uniformly distributed load over its entire length, is (A) 1 (B) 24/15 (C) 3/8 (D) 8/3
Last Answer : (D) 8/3
Description : What is the deviation ratio for an FM-phone signal having a maximum frequency swing of plus or minus 5 kHz and accepting a maximum modulation rate of 3kHz? A. 60 B. 0.16 C. 0.6 D. 1.66
Last Answer : D. 1.66
Description : What is meant by the term modulation index? A. The processor index. B. The ratio between the deviation of a frequency modulated signal and the modulating frequency. C. The FM signal-to-noise ratio. D. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency.
Last Answer : B. The ratio between the deviation of a frequency modulated signal and the modulating frequency.
Description : What is meant by the term deviation ratio? A. The ratio of the audio modulating frequency to the center carrier frequency. B. The ratio of the maximum carrier frequency deviation to the highest ... . D. The ratio of the highest audio modulating frequency to the average audio modulating frequency.
Last Answer : B. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency.
Description : What is meant by the term deviation ratio? A. The ratio of the carrier center frequency to the audio modulating frequency B. The ratio of the highest audio modulating frequency to the ... audio modulation frequency D. The ratio of the audio modulating frequency to the center carrier frequency
Last Answer : C. The ratio of the maximum carrier frequency deviation to the highest audio modulation frequency
Description : Define modulation index in FM. What is maximum value of deviation ratio.
Last Answer : Modulation Index of FM: It is defined as the ratio of Frequency Deviation (δ) to the modulating signal frequency (fm). (OR)
Description : The ratio of maximum displacement deviation to full scale deviation of the instrument is called?
Last Answer : The ratio of maximum displacement deviation to full scale deviation of the instrument is called linearity.
Description : A traverse deflection angle is (A) Less than 90° (B) More than 90° but less than 180° (C) The difference between the included angle and 180° (D) The difference between 360° and the included angle
Last Answer : (C) The difference between the included angle and 180°
Description : The bearings of two traverse legs AB and BC are N52° 45' E and N34° 30' E respectively. The deflection angle is (A) 18° 15' E (B) 18° 15' N (C) 18° 15' W (D) 18° 15' L
Last Answer : (D) 18° 15' L
Description : The angle between the prolongation of the preceding line and the forward line of a traverse is called (A) Deflection angle (B) Included angle (C) Direct angle (D) None of the above
Last Answer : (A) Deflection angle
Description : An angle of deflection right, may be directly obtained by setting the instrument to read (A) Zero on back station (B) 180° on back station (C) 90° (D) 270° on back station
Last Answer : (A) Zero on back station
Description : A ray of light suffers a deviation of `3.2^(@)` on passing through a thin prism of angle `5^(@)`. What is the refractive index of the material of the
Last Answer : A ray of light suffers a deviation of `3.2^(@)` on passing through a thin prism of angle ` ... is the refractive index of the material of the prism ?
Description : A glass prism has a refracting angle of `60^@`. The angle of minimum deviation is `40^@`. If velocity of light in vacuum is `3 xx 10^8 m//s`. Calculat
Last Answer : A glass prism has a refracting angle of `60^@`. The angle of minimum deviation is `40^@`. If ... of light in glass. What is the angle of incidence ?
Description : The refractive index of the material of a prism of `60^(@)` angle for yellow light is `sqrt(2)`. Calculate angle of minimum deviation, angle of incide
Last Answer : The refractive index of the material of a prism of `60^(@)` angle for yellow light is ... deviation, angle of incidence and angle of refraction.
Description : The refracting angle of a glass prism is `60^(@)`. The value of minium deviation for light passing through the prism is `40^(@)`. Calculate the value
Last Answer : The refracting angle of a glass prism is `60^(@)`. The value of minium deviation for light passing through the ... prism. Given `sin 50^(@) = 0.766`.
Description : The angle of minimum deviation of an equiangular prism, having a refractive index of 1.732 is (a) 60° (b) 30° (c) 45° (d) 0°
Last Answer : Ans:(a)
Description : In the following diagram, the path of a ray of light passing through a glass prism is shown: In this diagram the angle of incidence, the angle of emergence and the angle of deviation respectively are (select the correct option): (a) X, R and T (b) Y, Q and T (c) X, Q and P (d) Y, Q and P
Last Answer : (d) Y, Q and P
Description : A proton having mass m and charge q is projected into a region having a perpendicular magnetic field. The angle of deviation of proton when it comes out of the region with mv √2 qB ⁄ is a) π/3 b) π/4 c) π/6 d) 2 π/3
Last Answer : b) π/4
Description : Magnification factor is the ratio of the maximum displacement due to forced vibrations to the deflection due to _______ A Static force B Dynamic force C Torsion D Compression
Last Answer : A Static force
Description : The ratio of the maximum displacement of the forced vibration to the deflection due to the static force, is known as A Damping factor B Damping coefficient C Logarithmic decrement D Magnification factor
Last Answer : D Magnification factor
Description : The ratio of the maximum displacement of the forced vibration to the deflection due to the static force is known as A Logarithmic decrement B Magnification factor C Damping factor D None of the mentioned
Last Answer : B Magnification factor
Description : Transmissibility in a force excitation system is defined by the ratio of the A) Maximum excitation force to the force transmitted to the foundation B) Force transmitted to the foundation, to the maximum ... Maximum static deflection of the ass to the deflection of the foundation D) None of the above
Last Answer : B) Force transmitted to the foundation, to the maximum excitation force
Description : The ratio of maximum displacement of the forced vibration to the deflection due to the static force, is known as A. Damping FactorB. Damping Coefficient C. Logarithmic Decrement D. Magnification Factor
Last Answer : D. Magnification Factor
Description : The ratio of the maximum displacement of the forced vibration to the deflection due to the static force, is known as a) Damping factor b) Damping coefficient c) Logarithmic decrement d) Magnification factor
Last Answer : d) Magnification factor
Description : The ratio of the maximum displacement of the forced vibration to the deflection due to the static force is known as (A) damping factor (B) damping coefficient (C) logarithmic decrement (D) magnification factor
Last Answer : (D) magnification factor
Description : Magnification factor is the ratio of the maximum displacement due to forced vibrations to the deflection due to _______ a) Static force b) Dynamic force c) Torsion d) Compression
Last Answer : a) Static force
Description : The ratio of the maximum displacement of the forced vibration to the deflection due to the static force, is known as a) damping factor b) damping coefficient c) logarithmic decrement d) magnification factor
Last Answer : d) magnification factor
Description : The ratio of maximum displacement of the forced vibration to the deflection due to static force is known as : (A) Damping Factor (B) Damping Coefficient (C) Logarithmic Decrement (D) Magnification Factor
Last Answer : Magnification Factor
Description : For a cantilever of effective depth of 0.5 m, the maximum span to satisfy vertical deflection limit is (A) 3.5 m (B) 4 m (C) 4.5 m (D) 5 m
Last Answer : Answer: Option A
Description : If the width b and depth d of a beam simply supported with a central load are interchanged, the deflection at the centre of the beam will be changed in the ratio of (A) b/d (B) d/b (C) (d/b)2 (D) (b/d)
Last Answer : (D) (b/d)2
Description : A cantilever beam rectangular in cross-section is subjected to an isolated load at its free end. If the width of the beam is doubled, the deflection of the free end will be changed in the ratio of (A) 8 (B) 1/8 (C) 1/2 (D) 3
Last Answer : (C) 1/2