Description : If is the length of a sub-chord and is the radius of simple curve, the angle of deflection between its tangent and sub-chord, in minutes, is equal to (A) 573 S/R (B) 573 R/S (C) 1718.9 R/S (D) 1718.9 S/R
Last Answer : (D) 1718.9 S/R
Description : A lemniscate curve will not be transitional throughout, if its deflection angle, is (A) 45° (B) 60° (C) 90° (D) 120°
Last Answer : (A) 45°
Description : ABCD is a regular parallelogram plot of land whose angle BAD is 60°. If the bearing of the line AB is 30°, the bearing of CD, is (A) 90° (B) 120° (C) 210° (D) 270°
Last Answer : (C) 210°
Description : What is the value of included angle of a triangular notch for maximum discharge? (A) 30° (B) 60° (C) 90° (D) 120°
Last Answer : (C) 90°
Description : If D is the degree of the curve of radius R, the exact length of its specified chord, is (A) Radius of the curve sine of half the degree (B) Diameter of the curve sine of half the ... Diameter of the curve cosine of half the degree (D) Diameter of the curve tangent of half the degree
Last Answer : (B) Diameter of the curve × sine of half the degree
Description : The angle of intersection of a contour and a ridge line, is (A) 30° (B) 45° (C) 60° (D) 90°
Last Answer : (D) 90°
Description : At what value of crank angle (roughly), no flow of water from or into the air vessel takes place in case of a double acting reciprocating pump? (A) 40° and 140° (B) 45° and 60° (C) 90° and 80° (D) 20° and 120°
Last Answer : (A) 40° and 140
Description : The bond angle between carbon atoms in cyclohexane is (a) 60° (b) 90° (c) 109.5° (d) 120°
Last Answer : 109.5°
Description : The bond angle between carbon atoms in cyclohexane is (a) 109°28' (b) 60° (c) 90° (d) 120°
Last Answer : 109°28'
Description : The H–C–H bond angle in ethylene is (a) 60° (b) 120° (c) 90° (d) 180°
Last Answer : 120°
Description : The tangent length of a simple circular curve of radius R (A) R tan (B) R tan (C) R sin (D) R sin
Last Answer : Answer: Option B
Description : If the angle of incidence formed on a concave mirror at a point is 30° then the angle of reflection will be: (1) 15° (2) 30° (3) 60° (4) 90°
Last Answer : (2) 30° Explanation: The angle between the incident ray and the normal is known as the angle of inci dence. The angle between the reflected ray and the normal is known as the angle of reflection.
Description : For a curve of radius 100 m and normal chord 10 m, the Rankine's deflection angle, is (A) 0°25'.95 (B) 0°35'.95 (C) 1°25'.53 (D) 2°51'.53
Last Answer : (D) 2°51'.53
Description : If the length of a transition curve to be introduced between a straight and a circular curve of radius 500 m is 90 m, the maximum deflection angle to locate its junction point, is (A) 1°43' 08" (B) 1°43' 18" (C) 1°43' 28" (D) 1°43' 38"
Last Answer : (C) 1°43' 28"
Description : Pick up the correct statement from the following: (A) Long tangent sections exceeding 3 km in length should be avoided (B) Curve length should be at least 150 metres for a deflection angle of 5 ... decrease in the deflection angle, 30 metre length of curve to be increased (D) All the above
Last Answer : Answer: Option D
Description : In any good staircase, the maximum and minimum pitch respectively should be (A) 90° and 0° (B) 75° and 30° (C) 60° and 10° (D) 40° and 25°
Last Answer : Option D
Description : The angle of intersection of a curve is the angle between (A) Back tangent and forward tangent (B) Prolongation of back tangent and forward tangent (C) Forward tangent and long chord (D) Back tangent and long chord
Last Answer : (A) Back tangent and forward tangent
Description : Rankine's deflection angle in minutes is obtained by multiplying the length of the chord by (A) Degree of the curve (B) Square of the degree of the curve (C) Inverse of the degree of the curve (D) None of these
Last Answer : (A) Degree of the curve
Description : The radius of a simple circular curve is 300 m and length of its specified chord is 30 m. The degree of the curve is (A) 5.73° (B) 5.37° (C) 3.57° (D) 3.75°
Last Answer : (A) 5.73°
Description : A member is balanced at its end by two inclined members carrying equal forces. For equilibrium the angle between the inclined bars must be (A) 3° (B) 45° (C) 90° (D) 120°
Last Answer : (D) 120°
Description : If the output of a dragline for 90° angle of swing at optimum depth of cut is X, then the output for 120° angle of swing at 120 % of optimum depth of cut will be (A) Equal to X (B) More than X (C) Less than X (D) Any of the above
Last Answer : (C) Less than X
Description : Designation of a curve is made by: (A) Angle subtended by a chord of any length (B) Angle subtended by an arc of specified length (C) Radius of the curve (D) Curvature of the curve
Last Answer : (C) Radius of the curve
Description : 30°, 60° and 90° connections are made in a directional relay to render the relay (A) Sufficient torque under fault conditions (B) Zero torque under fault conditions (C) Current grading (D) Time grading
Last Answer : 30°, 60° and 90° connections are made in a directional relay to render the relay Sufficient torque under fault conditions
Description : If the radius of a main curve is 300 m and length of the transition curve is 100 m, the angle with tangent to locate the junction point, is (A) 1° 11' (B) 2° 11' (C) 3° 11' (D) 4° 11'
Last Answer : Answer: Option C
Description : The maximum shear stress occurs on the filament which makes an angle with the horizontal plane equal to (A) 30° (B) 45° (C) 60° (D) 90
Last Answer : (B) 45°
Description : The angle between skew back of a flat arch and the horizontal, is kept approximately equal to (A) 0° (B) 30° (C) 60° (D) 90
Description : If the radius of a simple curve is R, the length of the chord for calculating offsets by the method of chords produced, should not exceed. (A) R/10 (B) R/15 (C) R/20 (D) R/25
Last Answer : (C) R/20
Description : A chord of a circle of radius 20 cm subtends an angle of 90° at the centre. Find the area of the corresponding major segment of the circle. -Maths 10th
Last Answer : Area of the minor segment = { pi × 90 /360 - sin 45 × cos 45 } × r × r ={ 3.14 ×1/4 - 1÷√2 ×1÷√2 } × 20 × 20 = { 3.14 ... Area of major segment = area of circle - area of minor segment = 1256 - 114 = 1142 HOPE IT HELPS YOU
Description : For determining the support reactions at A and B of a three hinged arch, points B and Care joined and produced to intersect the load line at D and a line parallel to the load line through A at D'. Distances AD, DD ... reactions at A and B is (A) 30° (B) 45° (C) 60° (D) 90
Last Answer : (D) 90
Description : A well conditioned triangle has no angle less than (A) 20° (B) 30° (C) 45° (D) 60°
Last Answer : (B) 30°
Description : The angle between two plane mirrors of optical square, is (A) 20° (B) 30° (C) 45° (D) 60°
Last Answer : (C) 45°
Description : A projectile is fired at an angle to the vertical. Its horizontal range will be maximum when is (A) 0° (B) 30° (C) 45° (D) 60°
Description : Maximum number of vehicles can be parked with (A) Parallel parking (B) 30° angle parking (C) 45° angle parking (D) 90° angle parking
Description : A ship strikes the berth generally at an angle (A) 90° with the face of the dock (B) 45° with the face of the dock (C) 30° with the face of the dock (D) 10° with the face of the dock
Last Answer : (D) 10° with the face of the dock
Description : Plywood is made by bonding together thin layers of wood in such a way that the angle between grains of any layer to grains of adjacent layers is (A) 0° (B) 30° (C) 45° (D) 90°
Description : What will be the phase angle relationship of a six-pole, three-phase, rotating field generator? A. 60° B. 120° C. 180° D. 360°
Last Answer : Answer: B
Description : The H–C–C bond angle in ethane is (a) 60° (b) 109.5° (c) 120° (d) 118°28′
Description : If the radius of a simple curve is 600 m, the maximum length of the chord for calculating offsets, is taken (A) 15 m (B) 20 m (C) 25 m (D) 30 m
Last Answer : (D) 30 m
Description : Which of the following is closest to the C–O–C bond angle in CH3–O–CH3? (a) 180° (b) 120° (c) 109.5° (d) 90°
Description : If S, L and R are the arc length, long chord and radius of the sliding circle then the perpendicular distance of the line of the resultant cohesive force, is given by (A) a = S.R/L (B) a = L.S/R (C) a = L.R/S (D) None of these
Last Answer : (A) a = S.R/L
Description : Perpendicular offset from a tangent to the junction of a transition curve and circular curve is equal to (A) Shift (B) Twice the shift (C) Thrice the shift (D) Four times the shift
Last Answer : (D) Four times the shift
Description : The radius of curvature provided along a transition curve, is (A) Minimum at the beginning (B) Same throughout its length (C) Equal to the radius of circular curve (D) Varying from infinity to the radius of circular curve
Description : The angle of minimum deviation of an equiangular prism, having a refractive index of 1.732 is (a) 60° (b) 30° (c) 45° (d) 0°
Last Answer : Ans:(a)
Description : The angle in which a cricket ball should be hit to travel maximum horizontal distance is : (1) 60° with horizontal (2) 45° with horizontal (3) 30° with horizontal (4) 15° with horizontal
Last Answer : (2) 45° with horizontal Explanation: This has to do with the equation of a parabola or trajectory which is z = (tane)x 2 cos 9) 2. We can see that if the ball is fired at a 45 degree angle from the ground, the horizontal distance will be a maximum.
Description : The asbestos cement pipes are generally laid A. Horizontally B. Vertically C. At an angle of 30° D. At an angle of 60°
Last Answer : ANS: B
Description : The screens are fixed A. Perpendicular to the direction of flow B. Parallel to the direction of flow C. At an angle 30° to 60° to the direction of flow D. None of these
Last Answer : ANS: C
Last Answer : 45° with horizontal
Description : If whole circle bearing of a line is 120°, its reduced bearing is (A) S 20° E (B) S 60° E (C) N 120° E (D) N 60° E
Last Answer : (B) S 60° E
Description : Projectile will attain its maximum range, if it is fired at an angle of A. 30° B. 47° C. 90° D. 45°
Last Answer : 45°
Description : In case of full journal bearing, the angle of contact of the bushing with the journal is (A) 60° (B) 90° (C) 180° (D) 360°
Last Answer : (D) 360°