The depth of the centre of pressure on a vertical rectangular gate 8 m wide and 6 m high, when the water surface coincides with the top of the gate, is (A) 2.4 m (B) 3.0 m (C) 4.0 m (D) 5.0 m

The depth of the centre of pressure on a vertical rectangular gate 8 m wide and 6 m high, when
the water surface coincides with the top of the gate, is
(A) 2.4 m
(B) 3.0 m
(C) 4.0 m
(D) 5.0 m
by

1 Answer

Answer :

Answer: Option B
by

Related questions

The total pressure on the surface of a vertical sluice gate 2 m x 1 m with its top 2 m surface being 0.5 m below the water level will be (A) 500 kg (B) 1000 kg (C) 1500 kg (D) 2000 kg

Description : The total pressure on the surface of a vertical sluice gate 2 m x 1 m with its top 2 m surface being 0.5 m below the water level will be (A) 500 kg (B) 1000 kg (C) 1500 kg (D) 2000 kg

Last Answer : Answer: Option D

A T-beam behaves as a rectangular beam of a width equal to its flange if its neutral axis (A) Remains within the flange (B) Remains below the slab (C) Coincides the geometrical centre of the beam (D) None of these

Description : A T-beam behaves as a rectangular beam of a width equal to its flange if its neutral axis (A) Remains within the flange (B) Remains below the slab (C) Coincides the geometrical centre of the beam (D) None of these

Last Answer : Answer: Option A

Pick up the correct statement from the following: (A) A combined footing is so proportioned that centre of gravity of supporting area coincides with centre of gravity of two column loads (B) A combined footing may be either rectangular or trapezoidal in shape (C) Trapezoidal shaped footings may be provided under any loading (D) All the above

Description : Pick up the correct statement from the following: (A) A combined footing is so proportioned that centre of gravity of supporting area coincides with centre of gravity of two column loads (B) A ... in shape (C) Trapezoidal shaped footings may be provided under any loading (D) All the above

Last Answer : Answer: Option D

Total pressure on a lmxlm gate immersed vertically at a depth of 2 m below the free water surface will be (A) 1000 kg (B) 4000 kg (C) 2000 kg (D) 8000 kg

Description : Total pressure on a lmxlm gate immersed vertically at a depth of 2 m below the free water surface will be (A) 1000 kg (B) 4000 kg (C) 2000 kg (D) 8000 kg

Last Answer : Answer: Option A

A masonry dam (density = 20,000 N/m3 ) 6 m high, one metre wide at the top and 4 m wide at the base, has vertical water face. The minimum stress at the base of the dam when the reservoir is full, will be (A) 75 N/m2 (B) 750 N/m2 (C) 7500 N/m2 (D) 75000 N/m

Description : A masonry dam (density = 20,000 N/m3 ) 6 m high, one metre wide at the top and 4 m wide at the  base, has vertical water face. The minimum stress at the base of the dam when the reservoir is  full, will be  (A) 75 N/m2 (B) 750 N/m2 (C) 7500 N/m2 (D) 75000 N/m

Last Answer : (C) 7500 N/m

A concrete dam 15 m deep and 2 m wide containing water to a depth of 10 m .Find total hydrostatic pressure per meter run and centre of pressure on upstream face.

Description : A concrete dam 15 m deep and 2 m wide containing water to a depth of 10 m .Find total hydrostatic pressure per meter run and centre of pressure on upstream face.

Last Answer : A concrete dam 15 m deep and 2 m wide containing water to a depth of 10 m .Find total hydrostatic pressure per meter run and centre of pressure on upstream face.

A rectangular tank 10 m x 5 m in plan and 3 m deep is divided by a partition wall parallel to the shorter wall of the tank. One of the compartments contains water to a depth of 3 m, and the other a lighter liquid of specific gravity 0.75 to a depth of 2 m. The resultant pressure thrust on the partition wall is (a) 1000 kg (b) 1500 kg (c) 2000 kg (d) 2500 kg

Description : A rectangular tank 10 m x 5 m in plan and 3 m deep is divided by a partition wall parallel to the shorter wall of the tank. One of the compartments contains water to a depth of 3 m, and the other a lighter ... pressure thrust on the partition wall is (a) 1000 kg (b) 1500 kg (c) 2000 kg (d) 2500 kg

Last Answer : Correct Answer is 15000 kg

A rectangular beam 20 cm wide is subjected to a maximum shearing force of 10,000 kg, the corresponding maximum shearing stress being 30 kg/cm2 . The depth of the beam is (A) 15 cm (B) 20 cm (C) 25 cm (D) 30 cm

Description : A rectangular beam 20 cm wide is subjected to a maximum shearing force of 10,000 kg, the corresponding maximum shearing stress being 30 kg/cm2 . The depth of the beam is (A) 15 cm (B) 20 cm (C) 25 cm (D) 30 cm

Last Answer : (C) 25 cm

If the atmospheric pressure on the surface of an oil tank (sp. gr. 0.8) is 0.2 kg/cm", the pressure at a depth of 50 m below the oil surface will be (A) 2 meters of water column (B) 3 meters of water column (C) 5 meters of water column (D) 6 meters of water Column

Description : If the atmospheric pressure on the surface of an oil tank (sp. gr. 0.8) is 0.2 kg/cm", the pressure at a depth of 50 m below the oil surface will be (A) 2 meters of water column (B) 3 meters of water column (C) 5 meters of water column (D) 6 meters of water Column

Last Answer : Answer: Option D

A uniform body 3 m long, 2 m wide and 1 m deep floats in water. If the depth of immersion is 0.6 m, then the weight of the body is (A) 3.53 kN (B) 33.3 kN (C) 35.3 kN (D) None of these

Description : A uniform body 3 m long, 2 m wide and 1 m deep floats in water. If the depth of immersion is 0.6 m, then the weight of the body is (A) 3.53 kN (B) 33.3 kN (C) 35.3 kN (D) None of these

Last Answer : Answer: Option C

The centre to centre spacing of vertical stirrups, in a rectangular beam, is (a) Increased towards the centre of the span of the beam (b) Decreased towards the centre of the span of the beam. (c) Increased at the ends. (d) None of these

Description : The centre to centre spacing of vertical stirrups, in a rectangular beam, is (a) Increased towards the centre of the span of the beam (b) Decreased towards the centre of the span of the beam. (c) Increased at the ends. (d) None of these

Last Answer : (a) Increased towards the centre of the span of the beam

Pick up the correct statement from the following: (A) For channels, the shear centre does not coincide its centroid (B) The point of intersection of the bending axis with the cross section of the beam, is called shear centre (C) For I sections, the shear centre coincides with the centroid of the cross section of the beam (D) All the above

Description : Pick up the correct statement from the following:  (A) For channels, the shear centre does not coincide its centroid  (B) The point of intersection of the bending axis with the cross section ... shear centre coincides with the centroid of the cross section of the beam  (D) All the above

Last Answer : (D) All the above

04. A body floating in a liquid is said to be in a stable equilibrium, if its metacentre coincides with its centre of gravity. A) True B) False

Description : 04. A body floating in a liquid is said to be in a stable equilibrium, if its metacentre coincides with its centre of gravity. A) True B) False

Last Answer : B

A submerged body is said to be in a stable equilibrium, if its centre of gravity __________ the centre of buoyancy. (A) Coincides with (B) Lies below (C) Lies above (D) None of these

Description : A submerged body is said to be in a stable equilibrium, if its centre of gravity __________ the centre of buoyancy. (A) Coincides with (B) Lies below (C) Lies above (D) None of these

Last Answer : Answer: Option B

A body floating in a liquid is said to be in neutral equilibrium, if its metacentre (A) Coincides with its centre of gravity (B) Lies above its centre of gravityC) Lies below its centre of gravity (D) Lies between the centre of buoyancy and centre of gravity

Description : A body floating in a liquid is said to be in neutral equilibrium, if its metacentre (A) Coincides with its centre of gravity (B) Lies above its centre of gravity C) Lies below its centre of gravity (D) Lies between the centre of buoyancy and centre of gravity

Last Answer : Answer: Option A

A 8 metre long simply supported rectangular beam which carries a distributed load 45 kg/m. experiences a maximum fibre stress 160 kg/cm2 . If the moment of inertia of the beam is 640 cm4 , the overall depth of the beam is (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Description : A 8 metre long simply supported rectangular beam which carries a distributed load 45 kg/m. experiences a maximum fibre stress 160 kg/cm2 . If the moment of inertia of the beam is 640 cm4 , the overall depth of the beam is (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Last Answer : (A) 10 cm

A simply supported beam is of rectangular section.It carries a uniformly distributed load over the whole span.The deflection at the centre is y.If the depth of beam is doubled ,the deflection at the centre would be a.2y b.4y c.y/2 d.y/8.

Description : A simply supported beam is of rectangular section.It carries a uniformly distributed load over the whole span.The deflection at the centre is y.If the depth of beam is doubled ,the deflection at the centre would be a.2y b.4y c.y/2 d.y/8.

Last Answer : d.y/8.

For hydraulically efficient rectangular channel of bed width 4.0 m, the depth of flow is (a) 4 m (b) 0.5 m (c) 1 m (d) 2 m

Description : For hydraulically efficient rectangular channel of bed width 4.0 m, the depth of flow is (a) 4 m (b) 0.5 m (c) 1 m (d) 2 m

Last Answer : (d) 2 m

What is the distance away from midspan of a plastic hinge if developing in a simply supported beam of rectangular cross-section and span 6 m, subjected to a point load at the centre? (a) Zero (b) 1 m (c) 2 m (d) 3 m

Description : What is the distance away from midspan of a plastic hinge if developing in a simply supported beam of rectangular cross-section and span 6 m, subjected to a point load at the centre? (a) Zero (b) 1 m (c) 2 m (d) 3 m

Last Answer : (a) Zero

The effective depth of a singly reinforced rectangular beam is 300mm. the section is over-reinforced and the neutral axis is 120mm below the top. If the maximum stress attained by concrete is 5N/mn2 and the modular ratio is 18, then the stress developed in the steel will (a) 130N/mm2 (b) 135N/mm2 (c) 160N/mm2 (d) 180N/mm2

Description : The effective depth of a singly reinforced rectangular beam is 300mm. the section is over-reinforced and the neutral axis is 120mm below the top. If the maximum stress attained by concrete is 5N/mn2 and the modular ratio ... in the steel will (a) 130N/mm2 (b) 135N/mm2 (c) 160N/mm2 (d) 180N/mm2

Last Answer : (b) 135N/mm2

In a T-beam, the vertical distance between the bottom of the flange and the centre of the tensile reinforcement is (a) Breadth of flange (b) Thickness of flange (c) Breadth of slab (d) Depth of rib

Description : In a T-beam, the vertical distance between the bottom of the flange and the centre of the tensile reinforcement is (a) Breadth of flange (b) Thickness of flange (c) Breadth of slab (d) Depth of rib

Last Answer : (d) Depth of rib

A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one-third of the diagonal tension and ignoring the weight of the beam, the number of shear stirrups required, is (A) 30 (B) 35 (C) 40 (D) 45

Description : A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one- ... beam, the number of shear stirrups required, is (A) 30 (B) 35 (C) 40 (D) 45

Last Answer : Answer: Option C

The point at which the resultant pressure on an immersed surface acts, is known as (A) Centre of gravity (B) Centre of depth (C) Centre of pressure (D) Centre of immersed surface

Description : The point at which the resultant pressure on an immersed surface acts, is known as (A) Centre of gravity (B) Centre of depth (C) Centre of pressure (D) Centre of immersed surface

Last Answer : Answer: Option C

The total pressure on a horizontally immersed surface is (where w = Specific weight of the liquid, A = Area of the immersed surface, and x = Depth of the centre of gravity of the immersed surface from the liquid surface) (A) wA (B) wx (C) wAx (D) wA/x

Description : The total pressure on a horizontally immersed surface is (where w = Specific weight of the liquid, A = Area of the immersed surface, and x = Depth of the centre of gravity of the immersed surface from the liquid surface) (A) wA (B) wx (C) wAx (D) wA/x

Last Answer : Answer: Option C

The depth of centre of pressure (h) for a vertically immersed surface from the liquid surface is given by (where IG = Moment of inertia of the immersed surface about horizontal axis through its centre of gravity, A = Area of immersed surface, and x = Depth of centre of gravity of the immersed surface from the liquid surface) (A) (IG/ ) - (B) (IG/ ) - (C) ( /IG) + (D) (IG/ ) +

Description : The depth of centre of pressure (h) for a vertically immersed surface from the liquid surface is given by (where IG = Moment of inertia of the immersed surface about horizontal axis through its centre of gravity, A = Area of immersed surface, ... (IG/ ) - (B) (IG/ ) - (C) ( /IG) + (D) (IG/ ) +

Last Answer : Answer: Option D

For a cantilever of effective depth of 0.5 m, the maximum span to satisfy vertical deflection limit is (A) 3.5 m (B) 4 m (C) 4.5 m (D) 5 m

Description : For a cantilever of effective depth of 0.5 m, the maximum span to satisfy vertical deflection limit is (A) 3.5 m (B) 4 m (C) 4.5 m (D) 5 m

Last Answer : Answer: Option A

Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made vertically downwards from a horizontal plane (C) The horizontal plane with reference to which staff readings are taken, coincides with the level surface through the telescope axis (D) All the above

Description : Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made ... readings are taken, coincides with the level surface through the telescope axis (D) All the above

Last Answer : (D) All the above

If depth of slab is 10 cm, width of web 30 cm, depth of web 50 cm, centre to centre distance of beams 3 m, effective span of beams 6 m, the effective flange width of the beam, is (A) 200 cm (B) 300 cm (C) 150 cm (D) 100 cm

Description : If depth of slab is 10 cm, width of web 30 cm, depth of web 50 cm, centre to centre distance of beams 3 m, effective span of beams 6 m, the effective flange width of the beam, is (A) 200 cm (B) 300 cm (C) 150 cm (D) 100 cm

Last Answer : Answer: Option C

If two equal chords bisect each other, then the point of intersection of the chords coincides with their centre. [True `//` False]

Description : If two equal chords bisect each other, then the point of intersection of the chords coincides with their centre. [True `//` False]

Last Answer : If two equal chords bisect each other, then the point of intersection of the chords coincides with their centre. [True `//` False]

The width of a rectangular sewer is twice its depth while discharging 1.5 m/sec. The width of the sewer is A. 0.68 m B. 0.88 m C. 1.36 m D. 1.76 m

Description : The width of a rectangular sewer is twice its depth while discharging 1.5 m/sec. The width of the sewer is A. 0.68 m B. 0.88 m C. 1.36 m D. 1.76 m

Last Answer : ANS: C

The dimensions of a rectangular settling tank are: length 24 m, width 6 m and depth 3 m. If 2 hour detention period for tanks is recommended, the rate of flow of sewage per hour, is A. 204 cu.m B. 208 cu.m C. 212 cu.m D. 216 cu.m

Description : The dimensions of a rectangular settling tank are: length 24 m, width 6 m and depth 3 m. If 2 hour detention period for tanks is recommended, the rate of flow of sewage per hour, is A. 204 cu.m B. 208 cu.m C. 212 cu.m D. 216 cu.m

Last Answer : ANS: D

The intensity of vertical pressure at a depth directly below the point load on its axis of loading is: (A) 0.4775 Q/Z (B) 0.4775 Q/Z² (C) 0.4775 Q/Z3 (D) 0.4775 Q Z

Description : The intensity of vertical pressure at a depth directly below the point load on its axis of loading is: (A) 0.4775 Q/Z (B) 0.4775 Q/Z² (C) 0.4775 Q/Z3 (D) 0.4775 Q Z

Last Answer : (B) 0.4775 Q/Z²

Pick up the correct statement from the following regarding the pressure conduits: (A) Pressure conduits are permitted to run ¾th full (B) Pressure conduits are always laid along down grades (C) The hydraulic gradient line always coincides the invert of the conduit (D) None of these

Description : Pick up the correct statement from the following regarding the pressure conduits:  (A) Pressure conduits are permitted to run ¾th full  (B) Pressure conduits are always laid along down grades  ... ) The hydraulic gradient line always coincides the invert of the conduit  (D) None of these

Last Answer : (D) None of these

The moment of inertia of a rectangular section of width and depth about an axis passing through C.G. and parallel to its width is (A) BD²/6 (B) BD3 /6 (C) BD3 /12 (D) B²D/6

Description : The moment of inertia of a rectangular section of width and depth about an axis passing  through C.G. and parallel to its width is  (A) BD²/6  (B) BD3 /6  (C) BD3 /12  (D) B²D/6 

Last Answer : (C) BD3 /12 

Though the effective depth of a T-beam is the distance between the top compression edge to the centre of the tensile reinforcement, for heavy loads, it is taken as (A) 1/8th of the span (B) 1/10th of the span (C) 1/12th of the span (D) 1/16th of the span

Description : Though the effective depth of a T-beam is the distance between the top compression edge to the centre of the tensile reinforcement, for heavy loads, it is taken as (A) 1/8th of the span (B) 1/10th of the span (C) 1/12th of the span (D) 1/16th of the span

Last Answer : Answer: Option C

The effective depth of a T-beam is the distance between the (a) Centre of the flange and the top of the tensile reinforcement (b) Top of the flange and the centre of the tensile reinforcement (c) Bottom of the flange and the centre of the tensile reinforcement (d) Centre of the flange and the bottom centre of the tensile reinforcement

Description : The effective depth of a T-beam is the distance between the (a) Centre of the flange and the top of the tensile reinforcement (b) Top of the flange and the centre of the tensile ... centre of the tensile reinforcement (d) Centre of the flange and the bottom centre of the tensile reinforcement

Last Answer : (b) Top of the flange and the centre of the tensile reinforcement

For a strongest rectangular beam cut from a circular log, the ratio of the width and depth, is (A) 0.303 (B) 0.404 (C) 0.505 (D) 0.707

Description : For a strongest rectangular beam cut from a circular log, the ratio of the width and depth, is  (A) 0.303  (B) 0.404  (C) 0.505  (D) 0.707 

Last Answer : (D) 0.707 

If the permissible stress in steel in tension is 140 N/mm², then the depth of neutral axis for a singly reinforced rectangular balanced section will be (A) 0.35 d (B) 0.40 d (C) 0.45 d (D) Dependent on grade of concrete also

Description : If the permissible stress in steel in tension is 140 N/mm², then the depth of neutral axis for a singly reinforced rectangular balanced section will be (A) 0.35 d (B) 0.40 d (C) 0.45 d (D) Dependent on grade of concrete also

Last Answer : Answer: Option B

A rectangular grassy plot 110 m by 65 m has a gravel path 2.5 m wide all round it on the inside. Find the cost of gravelling the path at 80 paise per sq. Meter 1).Rs.680 2).Rs.860 3).Rs.608 4).None.

Description : A rectangular grassy plot 110 m by 65 m has a gravel path 2.5 m wide all round it on the inside. Find the cost of gravelling the path at 80 paise per sq. Meter 1).Rs.680 2).Rs.860 3).Rs.608 4).None.

Last Answer : 1).Rs.680 Exp: overall area of the grassy plot is 110 x 65 =7150 sq. meters.The area of the grassy plot after applying the gravel path is 105 x 60=6300 sq. meters.Area of the gravel path is 7150 – 6300 = 850 sq.mtrs.Hence x 0.80=Rs.680 .

For a continuous slab of 3 m × 3.5 m size, the minimum overall depth of slab to satisfy vertical deflection limits is (A) 50 mm (B) 75 mm (C) 100 mm (D) 120 mm

Description : For a continuous slab of 3 m × 3.5 m size, the minimum overall depth of slab to satisfy vertical deflection limits is (A) 50 mm (B) 75 mm (C) 100 mm (D) 120 mm

Last Answer : (B) 75 mm

A rectangular prism measures 2 meters long, 0.5 meter wide, and 1 meter high. What is the volume of the prism in centimeter?

Description : A rectangular prism measures 2 meters long, 0.5 meter wide, and 1 meter high. What is the volume of the prism in centimeter?

Last Answer : 1 square meter.2 * 1 * .5 = 1

A cylinder is filled to 4/5 th of its volume. It is, then tilted so that the level of water coincides with one edge of its bottom and top edge -Maths 9th

Description : A cylinder is filled to 4/5 th of its volume. It is, then tilted so that the level of water coincides with one edge of its bottom and top edge -Maths 9th

Last Answer : answer:

A beam of uniform rectangular section 200 mm wide and 300mm deep is simply supported at its ends.It carries a uniformly distributed load of 9KN/m run over the entire span of 5m.If E=1×104 N/mm2, what is the maximum deflection? a.14.26 mm b.17.28 mm c.18.53 mm d.16.27 mm.

Description : A beam of uniform rectangular section 200 mm wide and 300mm deep is simply supported at its ends.It carries a uniformly distributed load of 9KN/m run over the entire span of 5m.If E=1×104 N/mm2, what is the maximum deflection? a.14.26 mm b.17.28 mm c.18.53 mm d.16.27 mm.

Last Answer : d.16.27 mm.

For a simply supported beam of span 15 m, the minimum effective depth to satisfy the vertical deflection limits should be (A) 600 mm (B) 750 mm (C) 900 mm (D) More than 1 m

Description : For a simply supported beam of span 15 m, the minimum effective depth to satisfy the vertical deflection limits should be (A) 600 mm (B) 750 mm (C) 900 mm (D) More than 1 m

Last Answer : Answer: Option B

For a continuous slab of 3 m x 35 m size, the minimum overall depth of slab to satisfy vertical deflection limits is (a) 120 mm (b) 100 mm (c) 75 mm (d) 50 mm

Description : For a continuous slab of 3 m x 35 m size, the minimum overall depth of slab to satisfy vertical deflection limits is (a) 120 mm (b) 100 mm (c) 75 mm (d) 50 mm

Last Answer : (a) 120 mm

Consider the following statements in respect of critical flow in a wide rectangular channel: 1. The specific energy is minimum for a given discharge. 2. The discharge is maximum for a given specific energy 3. The specific force is minimum for a given discharge. 4. The Froude number is equal to unity. Which of these statements are correct? (a) 1 , 2 & 3 only (b) 1, 2, 3 & 4 (c) 1, 2 & 4 only (d) 2, 3 & 4 only

Description : Consider the following statements in respect of critical flow in a wide rectangular channel: 1. The specific energy is minimum for a given discharge. 2. The discharge is maximum for a given specific energy 3. The specific force is minimum for a ... b) 1, 2, 3 & 4 (c) 1, 2 & 4 only (d) 2, 3 & 4 only

Last Answer : (b) 1, 2, 3 & 4

The total and effective stresses at a depth of 5 m below the top level of water in a swimming pool are respectively (A) Zero and zero (B) 0.5 kg/cm² and zero (C) 0.5 kg/cm² and 0.5 kg/cm² (D) 1.0 kg/cm² and 0.5 kg/cm²

Description : The total and effective stresses at a depth of 5 m below the top level of water in a swimming pool are respectively (A) Zero and zero (B) 0.5 kg/cm² and zero (C) 0.5 kg/cm² and 0.5 kg/cm² (D) 1.0 kg/cm² and 0.5 kg/cm²

Last Answer : (B) 0.5 kg/cm² and zero

An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity of shear stress, is (A) 8.3 kg/cm2 (B) 7.6 kg/cm2 (C) 21.5 kg/cm2 (D) 11.4 kg/cm2

Description : An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity ... , is (A) 8.3 kg/cm2 (B) 7.6 kg/cm2 (C) 21.5 kg/cm2 (D) 11.4 kg/cm2

Last Answer : Answer: Option A

Depth of reinforcement below the surface of a concrete pavement, is generally kept (A) 5 cm (B) 6 cm (C) 7 m (D) 9 m

Description : Depth of reinforcement below the surface of a concrete pavement, is generally kept (A) 5 cm (B) 6 cm (C) 7 m (D) 9 m

Last Answer : Answer: Option A