The total pressure on the surface of a vertical sluice gate 2 m x 1 m with its top 2 m surface being 0.5 m below the water level will be (A) 500 kg (B) 1000 kg (C) 1500 kg (D) 2000 kg

The total pressure on the surface of a vertical sluice gate 2 m x 1 m with its top 2 m surface being
0.5 m below the water level will be
(A) 500 kg
(B) 1000 kg
(C) 1500 kg
(D) 2000 kg
by

1 Answer

Answer :

Answer: Option D
by

Related questions

Total pressure on a lmxlm gate immersed vertically at a depth of 2 m below the free water surface will be (A) 1000 kg (B) 4000 kg (C) 2000 kg (D) 8000 kg

Description : Total pressure on a lmxlm gate immersed vertically at a depth of 2 m below the free water surface will be (A) 1000 kg (B) 4000 kg (C) 2000 kg (D) 8000 kg

Last Answer : Answer: Option A

A rectangular tank 10 m x 5 m in plan and 3 m deep is divided by a partition wall parallel to the shorter wall of the tank. One of the compartments contains water to a depth of 3 m, and the other a lighter liquid of specific gravity 0.75 to a depth of 2 m. The resultant pressure thrust on the partition wall is (a) 1000 kg (b) 1500 kg (c) 2000 kg (d) 2500 kg

Description : A rectangular tank 10 m x 5 m in plan and 3 m deep is divided by a partition wall parallel to the shorter wall of the tank. One of the compartments contains water to a depth of 3 m, and the other a lighter ... pressure thrust on the partition wall is (a) 1000 kg (b) 1500 kg (c) 2000 kg (d) 2500 kg

Last Answer : Correct Answer is 15000 kg

A 3.2 m diameter balloon is filled with Helium. The total weight of balloon, gas and pay load is 10 kg kg. In an isothermal atmosphere having conditions identical to N.T.P. the balloon will rise to a height of about a.6000 m b.1500 m c.3000 m d.2000 m e.1000 m

Description : A 3.2 m diameter balloon is filled with Helium. The total weight of balloon, gas and pay load is 10 kg kg. In an isothermal atmosphere having conditions identical to N.T.P. the balloon will rise to a height of about a.6000 m b.1500 m c.3000 m d.2000 m e.1000 m

Last Answer : a. 6000 m

The depth of the centre of pressure on a vertical rectangular gate 8 m wide and 6 m high, when the water surface coincides with the top of the gate, is (A) 2.4 m (B) 3.0 m (C) 4.0 m (D) 5.0 m

Description : The depth of the centre of pressure on a vertical rectangular gate 8 m wide and 6 m high, when the water surface coincides with the top of the gate, is (A) 2.4 m (B) 3.0 m (C) 4.0 m (D) 5.0 m

Last Answer : Answer: Option B

The Vertical Separation Minimum (VSM) for flights in accordance with IFR within controlled airspace below FL290 is: a. 500 feet (150m) b. 2500 feet (750 m) c. 1000 feet (300m) d. 2000 feet (600m)

Description : The Vertical Separation Minimum (VSM) for flights in accordance with IFR within controlled airspace below FL290 is: a. 500 feet (150m) b. 2500 feet (750 m) c. 1000 feet (300m) d. 2000 feet (600m)

Last Answer : c. 1000 feet (300m)

The Vertical Separation Minimum (VSM) for flights in accordance with IFR within controlled airspace below FL290 is: a. 500 feet (150m) b. 2500 feet (750 m) c. 1000 feet (300m) d. 2000 feet (600m)

Description : The Vertical Separation Minimum (VSM) for flights in accordance with IFR within controlled airspace below FL290 is: a. 500 feet (150m) b. 2500 feet (750 m) c. 1000 feet (300m) d. 2000 feet (600m)

Last Answer : c. 1000 feet (300m)

For protection of level crossing gate in an emergency on BG double line the Gateman should place one detonator at one place and 3 detonators at a subsequent place at a distance of ------- a) and------- meters respectively b) 400 meters in 800 meters c) 500 meters and 1000 meters d) 600 meters and 1200 meters* e) 800 meters in 1500 meters

Description : For protection of level crossing gate in an emergency on BG double line the Gateman should place one detonator at one place and 3 detonators at a subsequent place at a distance of ------- a) and------ ... c) 500 meters and 1000 meters d) 600 meters and 1200 meters* e) 800 meters in 1500 meters

Last Answer : d) 600 meters and 1200 meters*

A cement concrete road is 1000 m long, 8 m wide and 15 cm thick over the sub-base of 10 cm thick gravel. The box cutting in road crust is (A) 500 m3 (B) 1000 m3 (C) 1500 m3 (D) 2000 m3

Description : A cement concrete road is 1000 m long, 8 m wide and 15 cm thick over the sub-base of 10 cm thick gravel. The box cutting in road crust is (A) 500 m3 (B) 1000 m3 (C) 1500 m3 (D) 2000 m3

Last Answer : (C) 1500 m3

Maximum daily traffic capacity of bituminous pavements is (A) 500 tonnes per day (B) 1000 tonnes per day (C) 1500 tonnes per day (D) 2000 tonnes per day

Description : Maximum daily traffic capacity of bituminous pavements is (A) 500 tonnes per day (B) 1000 tonnes per day (C) 1500 tonnes per day (D) 2000 tonnes per day

Last Answer : Answer: Option C

If the excavation of earth is done manually then it costs Rs. 10 per cum. A machine can excavate at a fixed cost of Rs. 4000 plus a variable cost of Rs. 2 per cum. The quantity of earth for which the cost of excavation by machine will be equal to the cost of manual excavation is (A) 500 cum (B) 1000 cum (C) 1500 cum (D) 2000 cum

Description : If the excavation of earth is done manually then it costs Rs. 10 per cum. A machine can excavate at a fixed cost of Rs. 4000 plus a variable cost of Rs. 2 per cum. The quantity of earth for which the cost ... the cost of manual excavation is (A) 500 cum (B) 1000 cum (C) 1500 cum (D) 2000 cum

Last Answer : (A) 500 cum

The lowest outlet sluice in a dam is provided (A) Below the dead storage (B) On the top level of dead storage (C) On the top level of useful storage (D) At the centre of the dam

Description : The lowest outlet sluice in a dam is provided (A) Below the dead storage (B) On the top level of dead storage (C) On the top level of useful storage (D) At the centre of the dam

Last Answer : (B) On the top level of dead storage

A hammer gains 50 Ns momentum in 0.05 sec. The average force on the hammer will be a.500 N b.2000 N c.1500 N d.107 dynes e.1000 N

Description : A hammer gains 50 Ns momentum in 0.05 sec. The average force on the hammer will be a.500 N b.2000 N c.1500 N d.107 dynes e.1000 N

Last Answer : e. 1000 N

The total and effective stresses at a depth of 5 m below the top level of water in a swimming pool are respectively (A) Zero and zero (B) 0.5 kg/cm² and zero (C) 0.5 kg/cm² and 0.5 kg/cm² (D) 1.0 kg/cm² and 0.5 kg/cm²

Description : The total and effective stresses at a depth of 5 m below the top level of water in a swimming pool are respectively (A) Zero and zero (B) 0.5 kg/cm² and zero (C) 0.5 kg/cm² and 0.5 kg/cm² (D) 1.0 kg/cm² and 0.5 kg/cm²

Last Answer : (B) 0.5 kg/cm² and zero

For design purposes, the normal rate of infiltration of ground water into the sewer, is A. 500 litres/km/cm B. 1000 litres/km/cm C. 1500 litres/km/cm D. 2000 litres/km/cm

Description : For design purposes, the normal rate of infiltration of ground water into the sewer, is A. 500 litres/km/cm B. 1000 litres/km/cm C. 1500 litres/km/cm D. 2000 litres/km/cm

Last Answer : ANS: D

Match the following : [IAS 1999] A. Cotton 1. Rainfall 1000-1500 mm; Temperature 40°-60°C B. Flax 2. Rainfall 1500-2000 mm; Temperature 25°-35°C C. Sugarbeet 3. Rainfall 600-S00 mm; Temperature 5°-18°C D. Jute 4. Rainfall 500-1000 mm; Temperature 18°-22°C 5. Rainfall 500-600 mm; Temperature 18°-22°C A B C D (a) 1 3 4 2 (b) 2 3 5 4 (c) 4 5 2 1 (d) 4 3 5 2 shop.ssbcrack.com

Description : Match the following : [IAS 1999] A. Cotton 1. Rainfall 1000-1500 mm; Temperature 40°-60°C B. Flax 2. Rainfall 1500-2000 mm; Temperature 25°-35°C C. Sugarbeet 3. Rainfall 600-S00 mm; Temperature 5°-18°C D. Jute 4. Rainfall 500-1000 mm; ... 1 3 4 2 (b) 2 3 5 4 (c) 4 5 2 1 (d) 4 3 5 2 shop.ssbcrack.com

Last Answer : Ans: (d)

How many mL of a 1:500 w/v stock solution should be used to make 5 liters of 1:2000 w/v solution? (A) 750 mL (B) 1000 mL (c) 1250 mL (D) 1500 mL

Description : How many mL of a 1:500 w/v stock solution should be used to make 5 liters of 1:2000 w/v solution? (A) 750 mL (B) 1000 mL (c) 1250 mL (D) 1500 mL

Last Answer : (c) 1250 mL

A sum of money is to be distributed among A, B, C, D in the proportion of 5:2:4:3. If C gets Rs. 1000 more than D, what is B's share? A) Rs. 500 B) Rs. 1500 C) Rs. 2000 D) Rs.2500 E) NONE

Description : A sum of money is to be distributed among A, B, C, D in the proportion of 5:2:4:3. If C gets Rs. 1000 more than D, what is B's share? A) Rs. 500 B) Rs. 1500 C) Rs. 2000 D) Rs.2500 E) NONE

Last Answer : Answer: C Let the shares of A, B, C, D be Rs. 5x, Rs. 2x, Rs. 4x and Rs. 3x respectively. Then, 4x−3x=1000 ⇒x=1000. B's share =Rs.2x=Rs.(2×1000)= Rs. 2000

A square surface 3 m × 3 m lies in a vertical line in water pipe its upper edge at water surface. The hydrostatic force on square surface is (A) 9,000 kg (B) 13,500 kg (C) 18,000 kg (D) 27,000 kg

Description : A square surface 3 m × 3 m lies in a vertical line in water pipe its upper edge at water surface. The hydrostatic force on square surface is (A) 9,000 kg (B) 13,500 kg (C) 18,000 kg (D) 27,000 kg

Last Answer : Answer: Option B

The 10 mm markings on a levelling staff placed at 20 m are separated by (A) 1/1000 radian (B) 1/1500 radian (C) 1/2000 radian (D) 1/2500 radian

Description : The 10 mm markings on a levelling staff placed at 20 m are separated by (A) 1/1000 radian (B) 1/1500 radian (C) 1/2000 radian (D) 1/2500 radian

Last Answer : (C) 1/2000 radian

Average resistance of human body is: a) 500 ohms b) 1000 ohms c) 1500 ohms d) 2000 ohms

Description : Average resistance of human body is: a) 500 ohms b) 1000 ohms c) 1500 ohms d) 2000 ohms

Last Answer : Ans: B

The maximum temperature in the I.C engine cylinder is of the order of a. 500 – 1000 C b. 1000 – 1500 C c. 1500 – 2000 C d. 2000 – 2500 C

Description : The maximum temperature in the I.C engine cylinder is of the order of a. 500 – 1000 C b. 1000 – 1500 C c. 1500 – 2000 C d. 2000 – 2500 C

Last Answer : ANSWER d. 2000 – 2500 C

In sewage, the solids in mg per litre is A. 100 to 500 B. 500 to 1000 C. 1000 to 1500 D. 1500 to 2000

Description : In sewage, the solids in mg per litre is A. 100 to 500 B. 500 to 1000 C. 1000 to 1500 D. 1500 to 2000

Last Answer : ANS: B

At what distance is VHF propagation normally limited? A. Around 500 miles B. Around 1500 miles C. Around 2000 miles D. Around 1000 miles

Description : At what distance is VHF propagation normally limited? A. Around 500 miles B. Around 1500 miles C. Around 2000 miles D. Around 1000 miles

Last Answer : A. Around 500 miles

At what distance is VHF propagation normally limited? A. Around 500 miles B. Around 1500 miles C. Around 2000 miles D. Around 1000 miles

Description : At what distance is VHF propagation normally limited? A. Around 500 miles B. Around 1500 miles C. Around 2000 miles D. Around 1000 miles

Last Answer : A. Around 500 miles

How many minimum tractor hours per year of 40 H.P. power should be used approximately for purely agricultural use and not for custom service unit to become viable unit ? (A) 500 hrs. (B) 600 hrs. (C) 1000 hrs. (D) 1500 hrs. (E) 2000 hrs.

Description : How many minimum tractor hours per year of 40 H.P. power should be used approximately for purely agricultural use and not for custom service unit to become viable unit ? (A) 500 hrs. (B) 600 hrs. (C) 1000 hrs. (D) 1500 hrs. (E) 2000 hrs.

Last Answer : (C) 1000 hrs.

How many minimum tractor hours per year of 40 H.P. power should be used approximately for purely agricultural use and not for custom service unit to become viable unit ? (A) 500 hrs. (B) 600 hrs. (C) 1000 hrs. (D) 1500 hrs. (E) 2000 hrs.

Description : How many minimum tractor hours per year of 40 H.P. power should be used approximately for purely agricultural use and not for custom service unit to become viable unit ? (A) 500 hrs. (B) 600 hrs. (C) 1000 hrs. (D) 1500 hrs. (E) 2000 hrs.

Last Answer : (E) 2000 hrs.

A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of an acknowledgement is 100 bytes and the transmission rate at the receiver is 8 Kbps. The one-way propagation delay is 100 milliseconds. Assuming no frame is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Last Answer : a. 2500

Hydrogen content in petroleum products varies from 12 to 15% (by weight). As a result the difference between gross and net heating value of petroleum fuels varies in the range of __________ kcal/kg. (A) 600-750 (B) 250-350 (C) 1000-1500 (D) 2000-2500

Description : Hydrogen content in petroleum products varies from 12 to 15% (by weight). As a result the difference between gross and net heating value of petroleum fuels varies in the range of __________ kcal/kg. (A) 600-750 (B) 250-350 (C) 1000-1500 (D) 2000-2500

Last Answer : (A) 600-750

Bulk density of pulverised coal may be about __________ kg/m3 . (A) 100 (B) 500 (C) 1000 (D) 1500

Description : Bulk density of pulverised coal may be about __________ kg/m3 . (A) 100 (B) 500 (C) 1000 (D) 1500

Last Answer : (B) 500

The stem of a cantilever retaining wall which retains earth level with top is 6 m. If the angle of repose and weight of the soil per cubic metre are 30° and 2000 kg respectively, the effective width of the stem at the bottom, is (A) 51.5 (B) 52.5 (C) 53.5 (D) 54.5

Description : The stem of a cantilever retaining wall which retains earth level with top is 6 m. If the angle of repose and weight of the soil per cubic metre are 30° and 2000 kg respectively, the effective width of the stem at the bottom, is (A) 51.5 (B) 52.5 (C) 53.5 (D) 54.5

Last Answer : Answer: Option C

Two Pelton turbines A and B have the same specific speed and are working under the same head. Turbine A produces 400 kW at 1000 rpm. If turbine B produces 100kW, then its rpm is (a) 4000 (b) 2000 (c) 1500 (d) 3000

Description : Two Pelton turbines A and B have the same specific speed and are working under the same head. Turbine A produces 400 kW at 1000 rpm. If turbine B produces 100kW, then its rpm is (a) 4000 (b) 2000 (c) 1500 (d) 3000

Last Answer : (b) 2000

The total dose of chloroquine (base) for treatment of an episode of malarial fever in a nonimmune adult is: A. 1000 mg B. 1500 mg C. 2000 mg D. 2500 mg

Description : The total dose of chloroquine (base) for treatment of an episode of malarial fever in a nonimmune adult is: A. 1000 mg B. 1500 mg C. 2000 mg D. 2500 mg

Last Answer : B. 1500 mg

Commercial available medium size machines have a speed range of ______ . (a) 200 to 400 r.p.m. (b) 600 to 1000 r.p.m. (c) 1000 to 1500 r.p.m. (d) 2000 to 2500 r.p.m.

Description : Commercial available medium size machines have a speed range of ______ . (a) 200 to 400 r.p.m. (b) 600 to 1000 r.p.m. (c) 1000 to 1500 r.p.m. (d) 2000 to 2500 r.p.m.

Last Answer : (d) 2000 to 2500 r.p.m.

The total number of male, female and children working in a factory is 72. They earn Rs.16000 in a day. If the sum of the wages of all male, all female and all children is in the ratio of 36 : 20 : 24 and if the wages of an individual male, female and child is in the ratio 6 : 5 : 3, then how much a female earn in a day? a) Rs 500 b) Rs 1000 c) Rs 1500 d) Rs 1200

Description : The total number of male, female and children working in a factory is 72. They earn Rs.16000 in a day. If the sum of the wages of all male, all female and all children is in the ratio of 36 : 20 : 24 and if the ... 3, then how much a female earn in a day? a) Rs 500 b) Rs 1000 c) Rs 1500 d) Rs 1200

Last Answer : B Ratio of number of male, female and children =36/6:20/5:24/3 = 6x:4x:8x So, (6x + 4x + 8x) = 72 18x=72 X=72/18=4 So, x = 4 Therefore, number of female = 16 Share of all female =20/80*16000 =Rs 4000 So, Share of each female = 4000/4 = Rs 1000

Heating value of coal is approximately (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg

Description : Heating value of coal is approximately (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg

Last Answer : Ans: C

Heating value of coal is approximately in power plant (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg.

Description : Heating value of coal is approximately in power plant (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg.

Last Answer : 5000-6500 kcal / kg

The weight of 1 m3 of brick earth, is about (A) 1200 kg (B) 1500 kg (C) 1800 kg (D) 2000 kg

Description : The weight of 1 m3 of brick earth, is about (A) 1200 kg (B) 1500 kg (C) 1800 kg (D) 2000 kg

Last Answer : Answer: Option C

If the atmospheric pressure on the surface of an oil tank (sp. gr. 0.8) is 0.2 kg/cm", the pressure at a depth of 50 m below the oil surface will be (A) 2 meters of water column (B) 3 meters of water column (C) 5 meters of water column (D) 6 meters of water Column

Description : If the atmospheric pressure on the surface of an oil tank (sp. gr. 0.8) is 0.2 kg/cm", the pressure at a depth of 50 m below the oil surface will be (A) 2 meters of water column (B) 3 meters of water column (C) 5 meters of water column (D) 6 meters of water Column

Last Answer : Answer: Option D

The pressure in the air space above an oil (sp. gr. 0.8) surface in a tank is 0.1 kg/cm". The pressure at 2.5 m below the oil surface will be (A) 2 metres of water column (B) 3 metres of water column (C) 3.5 metres of water column (D) 4 m of water column

Description : The pressure in the air space above an oil (sp. gr. 0.8) surface in a tank is 0.1 kg/cm". The pressure at 2.5 m below the oil surface will be (A) 2 metres of water column (B) 3 metres of water column (C) 3.5 metres of water column (D) 4 m of water column

Last Answer : Answer: Option B

A contractor wishes to determine a suitable combination of manual labour and machine work for the excavation of a multistory construction. For every cum of excavation, 3 man-hours are needed; or 0.2 machine-hour. Costs involved are Rs. 20 per man-hour and Rs. 500 per machine-hour. The total quantity of excavation is estimated to be 4,000 cum. The optimal quantity of excavation to be done manually for minimum total cost will be (a) 1500 cum (b) 1800 cum (c) 2250 cum (d) 2500 cum

Description : A contractor wishes to determine a suitable combination of manual labour and machine work for the excavation of a multistory construction. For every cum of excavation, 3 man-hours are needed; or 0.2 machine-hour. Costs ... total cost will be (a) 1500 cum (b) 1800 cum (c) 2250 cum (d) 2500 cum

Last Answer : (d) 2500 cum

As compared to crest of the normal portion of the weir, the crest of the under sluice portion of weir is kept at (A) Lower level (B) Higher level (C) Same level (D) Any of the above depending on the design

Description : As compared to crest of the normal portion of the weir, the crest of the under sluice portion of weir is kept at (A) Lower level (B) Higher level (C) Same level (D) Any of the above depending on the design

Last Answer : Answer: Option A

The internal dimensions of a ware house are 15 m × 5.6 m, and the maximum height of piles is 2.70 m, the maximum number of bags to be stored in two piles, are (A) 1500 bags (B) 2000 bags (C) 2500 bags (D) 3000 bags

Description : The internal dimensions of a ware house are 15 m × 5.6 m, and the maximum height of piles is 2.70 m, the maximum number of bags to be stored in two piles, are (A) 1500 bags (B) 2000 bags (C) 2500 bags (D) 3000 bags

Last Answer : Answer: Option D

Pressure relief valves are provided in water mains (A) To reduce the pressure (B) At low points (C) Upstream of sluice (D) All the above

Description : Pressure relief valves are provided in water mains  (A) To reduce the pressure  (B) At low points  (C) Upstream of sluice  (D) All the above 

Last Answer : (D) All the above 

In pressure supply mains, water hammer pressure is reduced by providing (A) Sluice valves (B) Air valves (C) Pressure relief valves (D) None of these

Description : In pressure supply mains, water hammer pressure is reduced by providing  (A) Sluice valves  (B) Air valves  (C) Pressure relief valves  (D) None of these 

Last Answer : (C) Pressure relief valves 

Out of all the elastomers, natural rubber has the longest elongation range & flexibility of the order of __________ percent. (A) 1-1000 (B) 1000-1500 (C) 1500-2000 (D) 2000-2500

Description : Out of all the elastomers, natural rubber has the longest elongation range & flexibility of the order of __________ percent. (A) 1-1000 (B) 1000-1500 (C) 1500-2000 (D) 2000-2500

Last Answer : (A) 1-1000

International parcel box rate is a) 1000,1500 & 2500 b) 2000,3000 & 5000 c) 750,1500&2500 d) None of these

Description : International parcel box rate is a) 1000,1500 & 2500 b) 2000,3000 & 5000 c) 750,1500&2500 d) None of these

Last Answer : a) 1000,1500 & 2500

International parcel box rate is a) 1000,1500 & 2500 b) 2000,3000 & 5000 c) 750,1500&2500 d) None of these

Description : International parcel box rate is a) 1000,1500 & 2500 b) 2000,3000 & 5000 c) 750,1500&2500 d) None of these

Last Answer : a) 1000,1500 & 2500

What is the range of minimum set of genes required for life? A.50-100 genes B.250-350 genes C.1000-1500 genes D.1500-2000 genes

Description : What is the range of minimum set of genes required for life? A.50-100 genes B.250-350 genes C.1000-1500 genes D.1500-2000 genes

Last Answer : 250-350 genes

What is the range of minimum set of genes required for life? A.50-100 genes B.250-350 genes C.1000-1500 genes D.1500-2000 genes

Description : What is the range of minimum set of genes required for life? A.50-100 genes B.250-350 genes C.1000-1500 genes D.1500-2000 genes

Last Answer : .250-350 genes