Fuse wire protection system is usually not used beyond: a. 10A b. 25A c. 50A d. 100A

Fuse wire protection system is usually not used beyond: a. 10A b. 25A c. 50A d. 100A  
by

1 Answer

Answer :

Fuse wire protection system is usually not used beyond: a. 10A b. 25A c. 50A d. 100A  

by

Related questions

In the illustrated motor controller, the motor fails to start. A voltmeter reading between 1 and 6 reads line voltage, while the voltmeter reading between 2 and 6 reads 0 VAC. The problem is __________. EL-0007 A. the control fuse is the wrong amperage not allowing full current to pass through B. the stop switch is open C. an open in the 'M' coil, 'Ma' contact/start switch or overload contacts D. fuse '10a' is blown

Description : In the illustrated motor controller, the motor fails to start. A voltmeter reading between 1 and 6 reads line voltage, while the voltmeter reading between 2 and 6 reads 0 VAC. The problem is __________. EL- ... in the 'M' coil, 'Ma' contact/start switch or overload contacts D. fuse '10a' is blown

Last Answer : Answer: B

If the motor fails to start and a voltmeter reading between 1 and 6, as illustrated, indicates line voltage, your next step should be to ________. EL-0007 A. replace fuse '10a' B. replace or repair contact 'Ma' C. reset and determine the cause of the overload D. check line voltage between L1 and L3

Description : If the motor fails to start and a voltmeter reading between 1 and 6, as illustrated, indicates line voltage, your next step should be to ________. EL-0007 A. replace fuse '10a' B. replace or repair contact 'Ma' C. reset and determine the cause of the overload D. check line voltage between L1 and L3

Last Answer : Answer: C

The kVA rating of Three-phase transformer with Voltage = 200V and Current = 100A will be :

Description : The kVA rating of Three-phase transformer with Voltage = 200V and Current = 100A will be :  (A) 34.64 kVA (B) 75 kVA (C) 20 kVA (D) None of the above

Last Answer : The kVA rating of Three-phase transformer with Voltage = 200V and Current = 100A will be : 34.64 kVA

Currents of `10A, 2A` are passed through two parallel wires `A` and `B` respectively in opposite directions. If the wire `A` is infinitely long and th

Description : Currents of `10A, 2A` are passed through two parallel wires `A` and `B` respectively in opposite directions. If the wire `A` is infinitely long and th

Last Answer : Currents of `10A, 2A` are passed through two parallel wires `A` and `B` respectively in opposite directions. If the ... `4xx10^(-7)N` D. `8xx10^(-7)N`

A 10A DC Ammeter has a resistance of 0.1 Ω is to be extended to 50 A, the required shunt wire is

Description : A 10A DC Ammeter has a resistance of 0.1 Ω is to be extended to 50 A, the required shunt wire is A) Manganin wire of 20 m Ω B) Constantan wire of 20 m Ω C) Manganin wire of 25 m Ω D) Constantan wire of 25 m Ω

Last Answer : A 10A DC Ammeter has a resistance of 0.1 Ω is to be extended to 50 A, the required shunt wire is Manganin wire of 25 m Ω

Which Article of the Indian Constitution includes the Fundamental Duties of the Indian citizens? (1) Article 50A (2) Article 50B (3) Article 51A (4) Article 51B

Description : Which Article of the Indian Constitution includes the Fundamental Duties of the Indian citizens? (1) Article 50A (2) Article 50B (3) Article 51A (4) Article 51B

Last Answer : (3) Article 51A Explanation: Article 51A became a part of the Indian Constitution on December 18, 1976 by virtue of the Constitutional (Forty Second) Amendment Act 1976. The new Part IVA was titled as Fundamental Duties.

Reserve Bank of India has made it mandatory on the banks to discontinue the practice of stapling the currency note packets under _______ of the Banking Regulation Act, 1949 A. Section 35A B. Section 25A C. Section 15A D. Section 30A E. None of the Above

Description : Reserve Bank of India has made it mandatory on the banks to discontinue the practice of stapling the currency note packets under _______ of the Banking Regulation Act, 1949 A. Section 35A B. Section 25A C. Section 15A D. Section 30A E. None of the Above

Last Answer : A. Section 35A Explanation: The Reserve Bank of India has made it mandatory on the banks to discontinue the practice of stapling the currency note packets. It has issued a directive to banks under Section 35A of the Banking Regulation Act, 1949.

Find the energy of a coil of inductance 18mH and current passing through it 1.25A.(in 10 -3 order) a) 14.06 b) 61 c) 46.1 d) 28.12

Description : Find the energy of a coil of inductance 18mH and current passing through it 1.25A.(in 10 -3 order) a) 14.06 b) 61 c) 46.1 d) 28.12

Last Answer : a) 14.06

Find the magnetic field intensity of a toroid of turns 40 and radius 20cm. The current carried by the toroid be 3.25A. a) 103.45 b) 102 c) 105.7 d) 171

Description : Find the magnetic field intensity of a toroid of turns 40 and radius 20cm. The current carried by the toroid be 3.25A. a) 103.45 b) 102 c) 105.7 d) 171

Last Answer : a) 103.45

I. 28a^2 + 25a − 8 = 0 II. 5b^2 − 13b − 6 = 0 1 : if a > b 2 : if a < b 3 : if a ≥ b 4 : if a ≤ b 5 : if a = b or the relation between a and b cannot be established.

Description : I. 28a^2 + 25a − 8 = 0 II. 5b^2 − 13b − 6 = 0 1 : if a > b 2 : if a < b 3 : if a ≥ b 4 : if a ≤ b 5 : if a = b or the relation between a and b cannot be established.

Last Answer : 5 : if a = b or the relation between a and b cannot be established.  

Why can't a star fuse chemical elements beyond iron?

Description : Why can't a star fuse chemical elements beyond iron?

Last Answer : It sure can - and some stars do, to a minor degree. However, it can no longer gain energy from this fusion - it costs energy to create heavier elements. --- To fuse Iron, you would need ... it can fuse. Elements heavier than Iron are created during a supernova explosion, the death of a massive star.

The rating of fuse wire is always expressed in

Description : The rating of fuse wire is always expressed in   (a) volts (b) amperes (c) ampere-volt (d) ampere-hours 

Last Answer : The rating of fuse wire is always expressed in Amperes 

A 1000W heater is rated to operate at a direct current (DC) of 10A. If the heater is supplied alternating

Description : A 1000W heater is rated to operate at a direct current (DC) of 10A. If the heater is supplied alternating current (AC) for producing the same quantity of heat the value of current should be  a. Iav=10A b. Irms=10A c. Ipeak=10A 

Last Answer : A 1000W heater is rated to operate at a direct current (DC) of 10A. If the heater is supplied alternating current (AC) for producing the same quantity of heat the value of current should be Irms=10A

In a d.c. series motor, the torque developed is 20 Nm at 10A. If the load current is doubled, the new torque will be : -

Description : In a d.c. series motor, the torque developed is 20 Nm at 10A. If the load current is doubled, the new torque will be : -  a) 60 Nm b) 45 Nm c) 80 Nm d) 100 Nm

Last Answer : In a d.c. series motor, the torque developed is 20 Nm at 10A. If the load current is doubled, the new torque will be : - 80 Nm

Which of the following is the least expensive protection for overcurrent is low voltage system ? (a) Rewireable fuse (b) Isolator (c) Oil circuit breaker (d) Air break circuit breaker (e) None of the above

Description : Which of the following is the least expensive protection for overcurrent is low voltage system ? (a) Rewireable fuse (b) Isolator (c) Oil circuit breaker (d) Air break circuit breaker (e) None of the above

Last Answer : (a) Rewireable fuse

A fuse will 'blow' if _____________. A. an electric motor is stopped suddenly by opening a switch B. the flow of current to the protection device is reversed C. the electrical current exceeds the rated value of the fuse D. unequal resistors are connected in parallel

Description : A fuse will 'blow' if _____________. A. an electric motor is stopped suddenly by opening a switch B. the flow of current to the protection device is reversed C. the electrical current exceeds the rated value of the fuse D. unequal resistors are connected in parallel

Last Answer : Answer: C

Which of the listed items will stop a motor due to a reduction in voltage and restart it when the voltage is restored to normal? A. Low voltage protection circuit B. Non-renewable link fuse C. Renewable link fuse D. Low voltage release circuit

Description : Which of the listed items will stop a motor due to a reduction in voltage and restart it when the voltage is restored to normal? A. Low voltage protection circuit B. Non-renewable link fuse C. Renewable link fuse D. Low voltage release circuit

Last Answer : Answer: D

Why PT fuse fails protection?

Description : Why PT fuse fails protection?  

Last Answer : Mho relays will mal-operate if PT voltage is lost to the relay, so tripping blocked by sensing PT fuse failure. 

A fuse in a motor circuit provides protection against?

Last Answer : A fuse in a motor circuit provides protection against short-circuit and overload.

Protection by fuses is generally not used beyond?

Last Answer : Protection by fuses is generally not used beyond 100 A .

The degree of protection by ground wire depends upon the a. Arcing angle b. Shielding angle c. Power factor d. All of above

Description : The degree of protection by ground wire depends upon the a. Arcing angle b. Shielding angle c. Power factor d. All of above

Last Answer : The degree of protection by ground wire depends upon the a. Arcing angle b. Shielding angle c. Power factor d. All of above

State difference between the wire used in the element of an electric heater and in a fuse wire. -Science

Description : State difference between the wire used in the element of an electric heater and in a fuse wire. -Science

Last Answer : The wire used in the element of electric heater has a high resistivity and have a high melting point, so that even at a high temperature element do not burn while fuse wire have a low melting point and high resistivity so that it will melt if a current of large magnitude passes through the wire.

Which covalent fuse wire is connected to the main circuit ?

Description : Which covalent fuse wire is connected to the main circuit ?

Last Answer : The fuse wire is connected to the main circuit in a class co-op.

Which wire is the fuse connected to ?

Description : Which wire is the fuse connected to ?

Last Answer : The fuse is connected to the live wire.

To which wire is the fuse connected ?

Description : To which wire is the fuse connected ?

Last Answer : The fuse is connected to the live wire

What is immeterial for an electric fuse wire ?

Description : What is immeterial for an electric fuse wire ?

Last Answer : What is immeterial for an electric fuse wire ? A. Its specific resistance B. Its radius C. Its length D. Current flowing through it

How much current can flow through a piece if fuse wire before it melts?

Description : How much current can flow through a piece if fuse wire before it melts?

Last Answer : What is the answer ?

Fuse wire is made of an alloy of

Description : Fuse wire is made of an alloy of

Last Answer : Tin and Lead

A fuse wire is made of:

Description : A fuse wire is made of:

Last Answer : An alloy of tin and lead

Fuse wire is made of _____? A. 63% lead arid 37% tin B. 63% tin and 37% aluminum C. 63% tin and 37% lead D. 63% lead and 37% aluminum

Description : Fuse wire is made of _____? A. 63% lead arid 37% tin B. 63% tin and 37% aluminum C. 63% tin and 37% lead D. 63% lead and 37% aluminum

Last Answer : ANSWER: C

Fuse wire is made of _____? A. 63% lead arid 37% tin B. 63% tin and 37% aluminum C. 63% tin and 37% lead D. 63% lead and 37% aluminum

Description : Fuse wire is made of _____? A. 63% lead arid 37% tin B. 63% tin and 37% aluminum C. 63% tin and 37% lead D. 63% lead and 37% aluminum

Last Answer : ANSWER: C

What is the function of a fuse wire? (a) To prevent an unduly high electric current from passing through a circuit (b) To increase the current supply (c) To decrease the current supply (d) To stabilise the voltage

Description : What is the function of a fuse wire? (a) To prevent an unduly high electric current from passing through a circuit (b) To increase the current supply (c) To decrease the current supply (d) To stabilise the voltage

Last Answer : Ans:(a)

The material used for a fuse wire should have (a) high resistivity (b) high ductility (c) high melting point (d) low melting point

Description : The material used for a fuse wire should have (a) high resistivity (b) high ductility (c) high melting point (d) low melting point

Last Answer : Ans:(d)

If a fuse blows frequently, one should (a) replace it with a thin wire (b) replace it with a thick copper wire (c) replace it with a paper clip (d) call an electrician

Description : If a fuse blows frequently, one should (a) replace it with a thin wire (b) replace it with a thick copper wire (c) replace it with a paper clip (d) call an electrician

Last Answer : Ans:(d)

In an electrical circuit, a fuse is connected (a) in the live wire (b) in the neutral wire (c) in the earth wire (d) anywhere—it makes no difference

Description : In an electrical circuit, a fuse is connected (a) in the live wire (b) in the neutral wire (c) in the earth wire (d) anywhere—it makes no difference

Last Answer : Ans:(a)

The commonly used safety fuse-wire is made of - (1) an alloy of Nickel and Lead (2) an alloy of Tin and Lead (3) an alloy of Tin and Nickel (4) an alloy of Lead and Iron

Description : The commonly used safety fuse-wire is made of - (1) an alloy of Nickel and Lead (2) an alloy of Tin and Lead (3) an alloy of Tin and Nickel (4) an alloy of Lead and Iron

Last Answer : (2) an alloy of Tin and Lead Explanation: As a rule, fuse elements of time delay fuses contain low melting point materials, e.g. tin (Sn) or zinc (Zn) and alloys thereof.

Fuse wire is made of an alloy of ______. (1) Lead and Copper (2) Tin and Copper (3) Tin and Lead (4) Copper and Silver

Description : Fuse wire is made of an alloy of ______. (1) Lead and Copper (2) Tin and Copper (3) Tin and Lead (4) Copper and Silver

Last Answer : (3) Tin and Lead Explanation: The material used for making fuse element has a low melting point such as tin, lead, or zinc.

A Fuse wire is characterized by – (1) High resistance and low melting point (2) High resistance and high melting point (3) Low resistance and high melting point (4) Low resistance and low melting point

Description : A Fuse wire is characterized by – (1) High resistance and low melting point (2) High resistance and high melting point (3) Low resistance and high melting point (4) Low resistance and low melting point

Last Answer : (4) Low resistance and low melting point Explanation: A fuse is a type of low resistance resistor that acts as a sacrificial device to provide over current protection, of either the load or source ... melt if a current more than the safe current for the appliance starts flowing through the circuit.

The nature of .fuse wire is – (1) high resistance and low melting point. (2) high resistance and high melting point. (3) low resistance and high melting point. (4) low resistance and low melting point.

Description : The nature of .fuse wire is – (1) high resistance and low melting point. (2) high resistance and high melting point. (3) low resistance and high melting point. (4) low resistance and low melting point.

Last Answer : (1) high resistance and low melting point. Explanation: A fuse or fusable link works by opening an electrical circuit when the current becomes too high. As the current increases, the temperature ... be connected in series with the appliance. Besides, it should have a comparatively high resistance.

Fuse wire is made of an alloy of – (1) Tin and Lead (2) Tin and Copper (3) Lead and Copper (4) Copper and Silver

Description : Fuse wire is made of an alloy of – (1) Tin and Lead (2) Tin and Copper (3) Lead and Copper (4) Copper and Silver

Last Answer : (1) Tin and Lead Explanation: The common material used as fuse wire is an alloy of tin and lead (63% tin and 37% lead). Fuse wires provide over current protection of an electrical circuit ... wire or strip that melts when too much current flows through it, thereby interrupting the flow of current.

A fuse wire is made of: (1) an alloy of tin and copper (2) an alloy of tin and lead (3) an alloy of tin and aluminium (4) an alloy of nickel and chromium

Description : A fuse wire is made of: (1) an alloy of tin and copper (2) an alloy of tin and lead (3) an alloy of tin and aluminium (4) an alloy of nickel and chromium

Last Answer : (2) an alloy of tin and lead Explanation: Electric fuse wire is an alloy made of tin (63 % lead 37 %. The cross sectional area determines the melting point at a certain current. Alloys (e.g. ... resulting combination of good conductivity (due to the tin) with a low melting point due to the lead).

The earth-wire of a cable is connected to – (1) the outer metallic body of the appliance (2) the fuse of the appliance (3) the filament of the appliance (4) short circuitry of the appliance

Description : The earth-wire of a cable is connected to – (1) the outer metallic body of the appliance (2) the fuse of the appliance (3) the filament of the appliance (4) short circuitry of the appliance

Last Answer : (2) the fuse of the appliance Explanation: Earth wire prevents Electric shocks. It is connected to the electrical cable of an appliance to prevent electric shocks. Actually it has very low resistance and allows current to pass through it easily.

Safety fuse wire used in domestic electrical appliances is made of metal of low (1) Resistance (2) Melting point (3) Specific gravity (4) Conductance

Description : Safety fuse wire used in domestic electrical appliances is made of metal of low (1) Resistance (2) Melting point (3) Specific gravity (4) Conductance

Last Answer : (2) Melting point Explanation: The fuse wire is based on the Joules law of heating which says that when the electric current is allowed to pass through a conductor, the conductor heats up and is ... . For this purpose the material used as fuse wire should have high resistance and low melting point.

A fuse wire can be indentify due to the properties

Description : A fuse wire can be indentify due to the properties

Last Answer : High Resistivity and minimum melting point

Fuse wire is made of-------? A. 63% tin and 37% lead (Answer) B. 63% lead and 37% tin C. 63% tin and 37% aluminum D. 63% lead and 37% aluminum

Description : Fuse wire is made of-------? A. 63% tin and 37% lead (Answer) B. 63% lead and 37% tin C. 63% tin and 37% aluminum D. 63% lead and 37% aluminum

Last Answer : A. 63% tin and 37% lead (Answer)

What is fuse and what materials used for fuse wire?

Description : What is fuse and what materials used for fuse wire?  

Last Answer : Fuse is a weakest point in an electrical circuit, which melts when the excess current flows through it in the electrical circuit. The materials, which can be used in fuses, are tin, lead, zinc, silver, antimony, copper, and aluminium, etc.  

The melting point of fuse wire should be high or low?

Description : The melting point of fuse wire should be high or low?

Last Answer : low

Fuse wire is made of an alloy of (1) Tin and Lead (2) Tin and Copper (3) Lead and Copper (4) Copper and Silver

Description : Fuse wire is made of an alloy of (1) Tin and Lead (2) Tin and Copper (3) Lead and Copper (4) Copper and Silver

Last Answer : Tin and Lead

A Fuse wire is characterised by (1) High resistance and low melting point (2) High resistance and high melting point (3) Low resistance and high melting point (4) Low resistance and low melting point

Description : A Fuse wire is characterised by (1) High resistance and low melting point (2) High resistance and high melting point (3) Low resistance and high melting point (4) Low resistance and low melting point

Last Answer : Low resistance and low melting point

A fuse wire is made of: (1) an alloy of tin and copper (2) an alloy of tin and lead (3) an alloy of tin and aluminium (4) an alloy of nickel and chromium

Description : A fuse wire is made of: (1) an alloy of tin and copper (2) an alloy of tin and lead (3) an alloy of tin and aluminium (4) an alloy of nickel and chromium

Last Answer : an alloy of tin and lead