Description : Fuse wire is made of _____? A. 63% lead arid 37% tin B. 63% tin and 37% aluminum C. 63% tin and 37% lead D. 63% lead and 37% aluminum
Last Answer : ANSWER: C
Description : Fuse wire is made of-------? A. 63% tin and 37% lead (Answer) B. 63% lead and 37% tin C. 63% tin and 37% aluminum D. 63% lead and 37% aluminum
Last Answer : A. 63% tin and 37% lead (Answer)
Description : The part of a fuse that melts and opens the circuit is made of _____________. A. copper and antimony B. steel and babbitt C. aluminum or beryllium alloy D. zinc or an alloy of tin and lead
Last Answer : Answer: D
Description : The commonly used safety fuse-wire is made of - (1) an alloy of Nickel and Lead (2) an alloy of Tin and Lead (3) an alloy of Tin and Nickel (4) an alloy of Lead and Iron
Last Answer : (2) an alloy of Tin and Lead Explanation: As a rule, fuse elements of time delay fuses contain low melting point materials, e.g. tin (Sn) or zinc (Zn) and alloys thereof.
Description : Fuse wire is made of an alloy of ______. (1) Lead and Copper (2) Tin and Copper (3) Tin and Lead (4) Copper and Silver
Last Answer : (3) Tin and Lead Explanation: The material used for making fuse element has a low melting point such as tin, lead, or zinc.
Description : Fuse wire is made of an alloy of – (1) Tin and Lead (2) Tin and Copper (3) Lead and Copper (4) Copper and Silver
Last Answer : (1) Tin and Lead Explanation: The common material used as fuse wire is an alloy of tin and lead (63% tin and 37% lead). Fuse wires provide over current protection of an electrical circuit ... wire or strip that melts when too much current flows through it, thereby interrupting the flow of current.
Description : A fuse wire is made of: (1) an alloy of tin and copper (2) an alloy of tin and lead (3) an alloy of tin and aluminium (4) an alloy of nickel and chromium
Last Answer : (2) an alloy of tin and lead Explanation: Electric fuse wire is an alloy made of tin (63 % lead 37 %. The cross sectional area determines the melting point at a certain current. Alloys (e.g. ... resulting combination of good conductivity (due to the tin) with a low melting point due to the lead).
Description : Fuse wire is made of an alloy of (1) Tin and Lead (2) Tin and Copper (3) Lead and Copper (4) Copper and Silver
Last Answer : Tin and Lead
Last Answer : an alloy of tin and lead
Description : Since fuse elements are made of zinc or any alloy of tin and lead, the melting point of the fuse element must be _____________. A. higher than that of copper B. lower than that of copper C. equal to that of copper D. reached when the conductor it is protecting becomes 'white hot.'
Last Answer : Answer: B
Description : Electric fuse is an alloy of – (1) tin and lead (2) zinc and lead (3) copper and iron (4) carbon and tin
Last Answer : (1) tin and lead Explanation: Electric fuse is an alloy of tin and lead.
Description : Electric fuse is an alloy of (1) tin and lead (2) zinc and lead (3) copper and iron (4) carbon and tin
Last Answer : tin and lead
Description : 125mL of 63% (w/v) `H_(2)C_(2)O_(4).2H_(2)O` solution is made to react with 125mL of a `40%` (w/v) `NaOH` solution. The resulting solution is : (ignor
Last Answer : 125mL of 63% (w/v) `H_(2)C_(2)O_(4).2H_(2)O` solution is made to react with 125mL of a ... ions) A. netural B. acidic C. strongly acidic D. alkaline
Description : _____ gives hardness to stainless steel. (1) Zinc (2) Lead (3) Carbon (4) Tin
Last Answer : (3) Carbon Explanation: Iron is alloyed with carbon to make steel and has the effect of increasing the hardness and strength of iron.
Last Answer : Carbon
Description : For the manufacture of Portland cement, the proportions of raw materials used, are (A) Lime 63% ; silica 22% ; other ingredients 15% (B) Lime 22% ; silica 63% ; other ingredients 15% (C) Silica 40% ; lime 40% ; other ingredients 20% (D) Silica 70% ; lime 20% ; other ingredients 10%
Last Answer : Answer: Option A
Description : A dealer buys an article marked at Rs. 50,000 at 25% and 10% successive discount. He spends Rs. 5000 on its repair and sells it for Rs. 50,000. What is his loss or gain percentage? 1. 33.63% loss 2. 26.43% gain 3. 1.25% gain 4. 29.03% 5. 27.13% loss
Last Answer : CP of the article
Description : The outside of the steel can is protected from rust by a thin layer of ____. a. tin c. aluminum b. copper d. silver
Last Answer : a. tin
Description : Which of the following metals is obtained from its most common ore using an electrolytic process? w) nickel x) tin y) aluminum z) manganese
Last Answer : ANSWER: Y -- ALUMINUM
Description : Which of the following elements would form a covalent bond with Bromine? w) Calcium x) Aluminum y) Oxygen z) Tin
Last Answer : ANSWER: Y -- OXYGEN
Description : Which of the following elements was unknown to ancient civilizations? w) tin x) aluminum y) mercury z) sulfur
Last Answer : ANSWER: X -- ALUMINUM
Description : Fuse wire is made of an alloy of
Description : A fuse wire is made of:
Last Answer : An alloy of tin and lead
Description : Safety fuse wire used in domestic electrical appliances is made of metal of low (1) Resistance (2) Melting point (3) Specific gravity (4) Conductance
Last Answer : (2) Melting point Explanation: The fuse wire is based on the Joules law of heating which says that when the electric current is allowed to pass through a conductor, the conductor heats up and is ... . For this purpose the material used as fuse wire should have high resistance and low melting point.
Last Answer : Melting point
Description : According to 1998 census, the literacy rate in Pakistan is: A. 25% B. 30% C. 37% D. 45%
Last Answer : ANSWER: D
Description : Explosion limit of blast furnace gas is 37 to 71% gas in gas-air mixture. It means that the blast furnace gas will explode when burnt in a confined space, if its concentration in the gas-air mixture is __________ percent. (A) < 37% (B) > 71% (C) In between 37 & 71% (D) None of these
Last Answer : (C) In between 37 & 71%
Description : plant protection operation are mechanized in India a) 40% b) 34% c) 37% d) 29%
Last Answer : 34%
Description : seed bed preparation are mechanized in India a) 40% b) 60% c) 37% d) 29%
Last Answer : 40%
Description : seeding and planting operation are mechanized in India a) 40% b) 60% c) 37% d)29%
Last Answer : 29%
Description : .What is the percentage of the echant agent used with composit resin restorations? a . 37% of phosphoric acid in water. b. 15% c. 18.5% d. 41%
Last Answer : a . 37% of phosphoric acid in water.
Description : 6.------- is the forest cover to be maintained as per the National Forest Policy (1988) 1. 67% for hills & 33% for plains 2. 37% for hills & 11% for plains 3. 17% for hills & 23% for plains 4. None of the above
Last Answer : Ans: 67% for Hills and 33% for plains
Description : The difference between 45% of a number and 37% of the same number is 896. What is 25% of that number ? a) 1200 b) 2800 c) 2569 d) 3467
Last Answer : Answer: B (45 – 37)% of the number = 896 8 % of the number = 896 Number =896 x100 /8 = 89600/8 = 11200 25% of 11200 = 11200 x 25/100 = 280000 / 100 = 2800
Description : Brass is made of – (1) copper and tin (2) tin and lead (3) copper and zinc (4) copper, tin and zinc
Last Answer : (3) copper and zinc Explanation: Brass is an alloy of copper and zinc; the proportions of zinc and copper can be varied to create a range of brasses with varying properties. By Comparison, bronze is principally an alloy of copper and tin.
Description : For platinum thermocouples, lead wires are made of (A) Copper & copper-nickel alloys (B) Copper & iron (C) Iron & nickel (D) Tin & nickel
Last Answer : (A) Copper & copper-nickel alloys
Description : Brass is made of (1) copper and tin (2) tin and lead (3) copper and zinc (4) copper, tin and zinc
Last Answer : copper and zinc
Description : Permanent magnets can be made from A. Aluminum B. Lead C. Zinc D. Cobalt
Description : State difference between the wire used in the element of an electric heater and in a fuse wire. -Science
Last Answer : The wire used in the element of electric heater has a high resistivity and have a high melting point, so that even at a high temperature element do not burn while fuse wire have a low melting point and high resistivity so that it will melt if a current of large magnitude passes through the wire.
Description : Which covalent fuse wire is connected to the main circuit ?
Last Answer : The fuse wire is connected to the main circuit in a class co-op.
Description : Which wire is the fuse connected to ?
Last Answer : The fuse is connected to the live wire.
Description : To which wire is the fuse connected ?
Last Answer : The fuse is connected to the live wire
Description : What is immeterial for an electric fuse wire ?
Last Answer : What is immeterial for an electric fuse wire ? A. Its specific resistance B. Its radius C. Its length D. Current flowing through it
Description : How much current can flow through a piece if fuse wire before it melts?
Last Answer : What is the answer ?
Description : What is the function of a fuse wire? (a) To prevent an unduly high electric current from passing through a circuit (b) To increase the current supply (c) To decrease the current supply (d) To stabilise the voltage
Last Answer : Ans:(a)
Description : The material used for a fuse wire should have (a) high resistivity (b) high ductility (c) high melting point (d) low melting point
Last Answer : Ans:(d)
Description : If a fuse blows frequently, one should (a) replace it with a thin wire (b) replace it with a thick copper wire (c) replace it with a paper clip (d) call an electrician
Description : In an electrical circuit, a fuse is connected (a) in the live wire (b) in the neutral wire (c) in the earth wire (d) anywhere—it makes no difference
Description : A Fuse wire is characterized by – (1) High resistance and low melting point (2) High resistance and high melting point (3) Low resistance and high melting point (4) Low resistance and low melting point
Last Answer : (4) Low resistance and low melting point Explanation: A fuse is a type of low resistance resistor that acts as a sacrificial device to provide over current protection, of either the load or source ... melt if a current more than the safe current for the appliance starts flowing through the circuit.
Description : The nature of .fuse wire is – (1) high resistance and low melting point. (2) high resistance and high melting point. (3) low resistance and high melting point. (4) low resistance and low melting point.
Last Answer : (1) high resistance and low melting point. Explanation: A fuse or fusable link works by opening an electrical circuit when the current becomes too high. As the current increases, the temperature ... be connected in series with the appliance. Besides, it should have a comparatively high resistance.