The pressure of liquid at throat in a Venturimeter is __________ than that at inlet. (A) Higher (B) Lower (C) Same (D) None of these

The pressure of liquid at throat in a Venturimeter is __________ than that at inlet.
(A) Higher
(B) Lower
(C) Same
(D) None of these
by

1 Answer

Answer :

Answer: Option B
by

Related questions

17. In a Venturimeter, the velocity of liquid at throat is __________ than at inlet. A) Higher B) Lowe

Description : 17. In a Venturimeter, the velocity of liquid at throat is __________ than at inlet. A) Higher B) Lowe

Last Answer : A

The energy loss in flow through Venturimeter is less than that through flow nozzle, because in case of a flow nozzle, the (A) Length is shorter (B) Throat diameter is more (C) Sudden expansion of flow in the downstream occurs (D) Distance between the throat and the inlet is more

Description : The energy loss in flow through Venturimeter is less than that through flow nozzle, because in case of a flow nozzle, the (A) Length is shorter (B) Throat diameter is more (C) Sudden expansion of flow in the downstream occurs (D) Distance between the throat and the inlet is more

Last Answer : (C) Sudden expansion of flow in the downstream occurs

Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter(B) A Venturimeter with a given gage difference discharges at a greater rate,when the flow is vertically downward through it, than when the flow is verticallyupward(C) For a given pressure difference, the discharge of gas is greater through aVenturimeter, when compressibility is taken into account, than when it isneglected(D) The overall pressure loss is the same in a given pipe line, whether aVenturimeter or a nozzle with the same throat dia is used

Description : Sele(A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meterct the correct statement. (B) A Venturimeter with a given gage difference discharges at a ... a given pipe line, whether a Venturimeter or a nozzle with the same throat dia is used

Last Answer : (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meterct the correct statement

Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter(B) A Venturimeter with a given gage difference discharges at a greater rate,when the flow is vertically downward through it, than when the flow is verticallyupward(C) For a given pressure difference, the discharge of gas is greater through aVenturimeter, when compressibility is taken into account, than when it isneglected(D) The overall pressure loss is the same in a given pipe line, whether aVenturimeter or a nozzle with the same throat dia is used

Description : Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter (B) A Venturimeter with a given gage difference discharges at a ... a given pipe line, whether a Venturimeter or a nozzle with the same throat dia is used

Last Answer : (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter

In order to avoid tendency of separation at throat in a Venturimeter, the ratio of the diameter at throat to the diameter of pipe should be (A) 1/16 to 1/8 (B) 1/8 to 1/4 (C) 1/4 to 1/3 (D) 1/3 to 1/2

Description : In order to avoid tendency of separation at throat in a Venturimeter, the ratio of the diameter at throat to the diameter of pipe should be (A) 1/16 to 1/8 (B) 1/8 to 1/4 (C) 1/4 to 1/3 (D) 1/3 to 1/2

Last Answer : Answer: Option D

Which of the following statement is wrong? (A) A flow whose streamline is represented by a curve is called two dimensional flow. (B) The total energy of a liquid particle is the sum of potential energy, kinetic energy and pressure energy. (C) The length of divergent portion in a Venturimeter is equal to the convergent portion. (D) A pitot tube is used to measure the velocity of flow at the required point in a pipe.

Description : Which of the following statement is wrong? (A) A flow whose streamline is represented by a curve is called two dimensional flow. (B) The total energy of a liquid particle is the sum of potential energy, ... (D) A pitot tube is used to measure the velocity of flow at the required point in a pipe.

Last Answer : Answer: Option C

Venturimeter is used to (A) Measure the velocity of a flowing liquid (B) Measure the pressure of a flowing liquid (C) Measure the discharge of liquid flowing in a pipe (D) Measure the pressure difference of liquid flowing between two points in a pipe line

Description : Venturimeter is used to (A) Measure the velocity of a flowing liquid (B) Measure the pressure of a flowing liquid (C) Measure the discharge of liquid flowing in a pipe (D) Measure the pressure difference of liquid flowing between two points in a pipe line

Last Answer : Answer: Option C

The pressure of the liquid flowing through the divergent portion of a Venturimeter (A) Remains constant (B) Increases (C) Decreases (D) Depends upon mass of liquid

Description : The pressure of the liquid flowing through the divergent portion of a Venturimeter (A) Remains constant (B) Increases (C) Decreases (D) Depends upon mass of liquid

Last Answer : Answer: Option C

The divergent portion of a Venturimeter is made longer than convergent portion in order to (A) Avoid the tendency of breaking away the stream of liquid (B) To minimise frictional losses (C) Both (A) and (B) (D) None of these

Description : The divergent portion of a Venturimeter is made longer than convergent portion in order to (A) Avoid the tendency of breaking away the stream of liquid (B) To minimise frictional losses (C) Both (A) and (B) (D) None of these

Last Answer : Answer: Option C

When the Venturimeter is inclined, then for a given flow it will show __________ reading. (A) Same (B) More (C) Less (D) None of these

Description : When the Venturimeter is inclined, then for a given flow it will show __________ reading. (A) Same (B) More (C) Less (D) None of these

Last Answer : Answer: Option A

In centrifugal pump operation, the cavitation can be eliminated by maintaining suction pressure __________ the vapor pressure of the liquid at the suction temperature. (A) Lower than (B) Higher than (C) Equal to (D) None of these

Description : In centrifugal pump operation, the cavitation can be eliminated by maintaining suction pressure __________ the vapor pressure of the liquid at the suction temperature. (A) Lower than (B) Higher than (C) Equal to (D) None of these

Last Answer : (B) Higher than

The velocity of the liquid flowing through the divergent portion of a Venturimeter (A) Remains constant (B) Increases (C) Decreases (D) Depends upon mass of liquid

Description : The velocity of the liquid flowing through the divergent portion of a Venturimeter (A) Remains constant (B) Increases (C) Decreases (D) Depends upon mass of liquid

Last Answer : Answer: Option C

Pick up the incorrect statement regarding a master trap from the following: (A) It is provided in between the lower end of the house drain and the street sewer (B) It is provided a cleaning eye at the top of the trap (C) The mica flap valve which opens inwards only, is fitted at the top of the inlet pipe (D) The water seal is less than that of ordinary traps

Description : Pick up the incorrect statement regarding a master trap from the following: (A) It is provided in between the lower end of the house drain and the street sewer (B) It is provided a cleaning eye at the ... fitted at the top of the inlet pipe (D) The water seal is less than that of ordinary traps

Last Answer : (D) The water seal is less than that of ordinary traps

Venturimeter is used to measure: (1) rate of flow of liquids (2) liquid pressure (3) surface tension (4) liquid density

Description : Venturimeter is used to measure: (1) rate of flow of liquids (2) liquid pressure (3) surface tension (4) liquid density

Last Answer : rate of flow of liquids

If cohesion between molecules of a fluid is greater than adhesion between fluid and glass, then the free level of fluid in a dipped glass tube will be(A) Higher than the surface of liquid (B) The same as the surface of liquid (C) Lower than the surface of liquid (D) Unpredictable

Description : If cohesion between molecules of a fluid is greater than adhesion between fluid and glass, then the free level of fluid in a dipped glass tube will be (A) Higher than the surface of liquid (B) The same as the surface of liquid (C) Lower than the surface of liquid (D) Unpredictable

Last Answer : Answer: Option C

The length of the divergent cone in a Venturimeter is __________ that of the convergent cone. (A) Equal to (B) Double (C) Three to four times (D) Five to six times

Description : The length of the divergent cone in a Venturimeter is __________ that of the convergent cone. (A) Equal to (B) Double (C) Three to four times (D) Five to six times

Last Answer : Answer: Option C

A differential manometer is used to measure (A) Atmospheric pressure (B) Pressure in pipes and channels (C) Pressure in Venturimeter (D) Difference of pressures between two points in a pipe

Description : A differential manometer is used to measure (A) Atmospheric pressure (B) Pressure in pipes and channels (C) Pressure in Venturimeter (D) Difference of pressures between two points in a pipe

Last Answer : Answer: Option D

A manometer is used to measure (A) Atmospheric pressure (B) Pressure in pipes and channels (C) Pressure in Venturimeter (D) Difference of pressures between two points in a pipe

Description : A manometer is used to measure (A) Atmospheric pressure (B) Pressure in pipes and channels (C) Pressure in Venturimeter (D) Difference of pressures between two points in a pipe

Last Answer : Answer: Option B

__________ is used for measuring the static pressure exerted on the wall by a fluid flowing parallel to the wall in a pipeline. (A) Venturimeter (B) Pressure gauge(C) Pitot tube(D) Orificemeter

Description : __________ is used for measuring the static pressure exerted on the wall by a fluid flowing parallel to the wall in a pipeline. (A) Venturimeter (B) Pressure gauge (C) Pitot tube (D) Orificemeter

Last Answer : (C) Pitot tube

Permanent pressure loss in a well designed Venturimeter is about __________ percent of the venturi differential. (A) 1 (B) 10 (C) 30 (D) 50

Description : Permanent pressure loss in a well designed Venturimeter is about __________ percent of the venturi differential. (A) 1 (B) 10 (C) 30 (D) 50

Last Answer : (A) 1

Venturimeter and orificemeter measures the __________ of the fluid. (A) Pressure (B) Maximum velocity (C) Average velocity (D) Point velocity

Description : Venturimeter and orificemeter measures the __________ of the fluid. (A) Pressure (B) Maximum velocity (C) Average velocity (D) Point velocity

Last Answer : (C) Average velocity

Permanent loss in a Venturimeter is about __________ percent of the pressure drop in the upstream cone. (A) 1 (B) 10 (C) 40 (D) 70

Description : Permanent loss in a Venturimeter is about __________ percent of the pressure drop in the upstream cone. (A) 1 (B) 10 (C) 40 (D) 70

Last Answer : (B) 10

In a/an __________, the flow rate of fluids is obtained by measuring the difference between the impact and the static pressure. (A) Rotameter (B) Pitot tube (C) Venturimeter (D) Flow nozzle

Description : In a/an __________, the flow rate of fluids is obtained by measuring the difference between the impact and the static pressure. (A) Rotameter (B) Pitot tube (C) Venturimeter (D) Flow nozzle

Last Answer : (B) Pitot tube

The viscosity of water is __________ than that of mercury. (A) Higher (B) Lower (C) Same as (D) None of these

Description : The viscosity of water is __________ than that of mercury. (A) Higher (B) Lower (C) Same as (D) None of these

Last Answer : Answer: Option A

The surface tension of mercury at normal temperature is __________ that of water. (A) Same as (B) Lower than (C) Higher than (D) None of these

Description : The surface tension of mercury at normal temperature is __________ that of water. (A) Same as (B) Lower than (C) Higher than (D) None of these

Last Answer : Answer: Option C

Power loss in an orificemeter is __________ that in a Venturimeter. (A) Less than (B) Same as (C) More than (D) Data insufficient, cannot be predicted

Description : Power loss in an orificemeter is __________ that in a Venturimeter. (A) Less than (B) Same as (C) More than (D) Data insufficient, cannot be predicted

Last Answer : (C) More than

When adsorption hysteresis is observed, the desorption equilibrium pressure is __________ that obtained by adsorption. (A) Always lower than (B) Always higher than (C) Same as (D) Dependent on the system; can be either lower or higher than

Description : When adsorption hysteresis is observed, the desorption equilibrium pressure is __________ that obtained by adsorption. (A) Always lower than (B) Always higher than (C) Same as (D) Dependent on the system; can be either lower or higher than

Last Answer : (A) Always lower than

Though, theoretically the adsorption & desorption isotherms is expected to coincide but sometimes at least a part of the isotherms does not coincide and this phenomenon is known as adsorption hysteresis. In such cases, the desorption equilibrium pressure is __________ that obtained for adsorption. (A) Lower than (B) Higher than (C) Same as (D) Either same or higher than

Description : Though, theoretically the adsorption & desorption isotherms is expected to coincide but sometimes at least a part of the isotherms does not coincide and this phenomenon is known as adsorption hysteresis. In such ... (B) Higher than (C) Same as (D) Either same or higher than

Last Answer : (A) Lower than

Conversion of dynamic velocity head into static pressure head in a centrifugal pump is the result of : (a) Increasing area of flow between adjacent vanes from inlet to outlet (b) Difference in pressure between suction and delivery ends (c) Radial thrust in pumps (d) Stuffing Box

Description : Conversion of dynamic velocity head into static pressure head in a centrifugal pump is the result of : (a) Increasing area of flow between adjacent vanes from inlet to outlet (b) Difference in pressure between suction and delivery ends (c) Radial thrust in pumps (d) Stuffing Box

Last Answer : (b) Difference in pressure between suction and delivery ends

Filtration operation carried out by continuous increase of the inlet pressure of slurry, is called the __________ filtration. (A) Constant rate (B) Varying pressure (C) Varying rate (D) Constant pressure

Description : Filtration operation carried out by continuous increase of the inlet pressure of slurry, is called the __________ filtration. (A) Constant rate (B) Varying pressure (C) Varying rate (D) Constant pressure

Last Answer : (A) Constant rate

For manometer, a better liquid combination is one having (A) Higher surface tension (B) Lower surface tension (C) Surface tension is no criterion (D) High density and viscosity

Description : For manometer, a better liquid combination is one having (A) Higher surface tension (B) Lower surface tension (C) Surface tension is no criterion (D) High density and viscosity

Last Answer : Answer: Option A

At the same gas flow rate, the pressure drop in a packed tower being irrigated with liquid __________ that in dry packed tower. (A) Is greater than (B) Is lower than (C) Is same as (D) Cannot be predicted as data are insufficient

Description : At the same gas flow rate, the pressure drop in a packed tower being irrigated with liquid __________ that in dry packed tower. (A) Is greater than (B) Is lower than (C) Is same as (D) Cannot be predicted as data are insufficient

Last Answer : (A) Is greater than

Nominal size of the discharge pipe of a pump is usually __________ the nominal size of the inlet pipe. (A) Smaller than (B) Larger than (C) Same as (D) Twice

Description : Nominal size of the discharge pipe of a pump is usually __________ the nominal size of the inlet pipe. (A) Smaller than (B) Larger than (C) Same as (D) Twice

Last Answer : (A) Smaller than

For the same flow rate of a fluid, the pressure drop is the least for (A) Venturimeter (B) Orificemeter (C) Flow-nozzle (D) Δp is same for all

Description : For the same flow rate of a fluid, the pressure drop is the least for (A) Venturimeter (B) Orificemeter (C) Flow-nozzle (D) Δp is same for all

Last Answer : (A) Venturimeter

Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation (B) Cavitation may be caused due to boiling of liquid by decreasing the pressure resulting in formation & collapse of vapor cavities (C) Cavitation begins at higher static pressure and lower velocity in larger diameter pipelines resulting in audible noise(D) Large scale cavitation cannot damage pipeline, restrict fluid flow anddamage steam turbine blades

Description : Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation ... (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

Last Answer : (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

In thermodynamics, a throttling process, also called a _________, is a type of isenthalpic process where a liquid or gas is cooled as it passes from a higher pressure state to a lower pressure state.  a. Rankine Process  b. Carnot Cycle  c. Joule-Thomson process  d. Refrigeration process

Description : In thermodynamics, a throttling process, also called a _________, is a type of isenthalpic process where a liquid or gas is cooled as it passes from a higher pressure state to a lower pressure state.  a. Rankine Process  b. Carnot Cycle  c. Joule-Thomson process  d. Refrigeration process

Last Answer : Joule-Thomson process

The pressure and velocity at the throat of a Venturi tube, measuring the flow of a liquid, are related to the

Description : The pressure and velocity at the throat of a Venturi tube, measuring the flow of a liquid, are related to the upstream pressure and velocity, respectively, as follows: (A) Pressure is lower but ... velocity is lower (C) Both pressure and velocity are lower (D) Pressure and velocity are identical

Last Answer : The pressure and velocity at the throat of a Venturi tube, measuring the flow of a liquid, are related to the upstream pressure and velocity, respectively, as follows: (A) Pressure is lower but ... lower (C) Both pressure and velocity are lower (D) Pressure and velocity are identical

In the illustration, the tan and white wires are connected to the solenoid valve. The solinoid valve is_________. EL-0043 A. in the liquid line before the TXV B. energized and open whenever the unit is plugged in C. not grounded so the unit must be modified before using aboard ship D. the water inlet for the ice maker

Description : In the illustration, the tan and white wires are connected to the solenoid valve. The solinoid valve is_________. EL-0043 A. in the liquid line before the TXV B. energized and open whenever the unit ... so the unit must be modified before using aboard ship D. the water inlet for the ice maker

Last Answer : Answer: D

In the illustration, the tan and white wires are connected to the solenoid valve. The solenoid valve is_________. EL-0042 A. in the liquid line before the TXV B. energized and open whenever the unit is plugged in C. not grounded so the unit must be modified before using aboard ship D. the water inlet for the ice maker

Description : In the illustration, the tan and white wires are connected to the solenoid valve. The solenoid valve is_________. EL-0042 A. in the liquid line before the TXV B. energized and open whenever the unit ... so the unit must be modified before using aboard ship D. the water inlet for the ice maker

Last Answer : Answer: D

A pump operating under specific conditions delivers insufficient quantity of liquid. This may be set right by (A) Decreasing the size of the inlet pipe (B) Increasing the size of the inlet pipe (C) Lowering the pump position (D) Both (B) and (C)

Description : A pump operating under specific conditions delivers insufficient quantity of liquid. This may be set right by (A) Decreasing the size of the inlet pipe (B) Increasing the size of the inlet pipe (C) Lowering the pump position (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Delivery of insufficient quantity of liquid by a pump may be caused by (A) Air leak in the inlet (B) Low rpm (C) Too high a lift (D) All (A), (B) and (C)

Description : Delivery of insufficient quantity of liquid by a pump may be caused by (A) Air leak in the inlet (B) Low rpm (C) Too high a lift (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The exit cone angle in case of a standard Venturimeter is __________ the entrance cone angle. (A) Smaller than (B) Greater than (C) Equal to (D) Either (A) or (B)

Description : The exit cone angle in case of a standard Venturimeter is __________ the entrance cone angle. (A) Smaller than (B) Greater than (C) Equal to (D) Either (A) or (B)

Last Answer : (A) Smaller than

In order to measure the flow with a Venturimeter, it is installed in (A) Horizontal line (B) Inclined line with flow upwards (C) Inclined line with flow downwards (D) Any direction and in any location

Description : In order to measure the flow with a Venturimeter, it is installed in (A) Horizontal line (B) Inclined line with flow upwards (C) Inclined line with flow downwards (D) Any direction and in any location

Last Answer : Answer: Option D

Bernoulli's equation is applied to (A) Venturimeter (B) Orifice meter (C) Pitot tube (D) All of these

Description : Bernoulli's equation is applied to (A) Venturimeter (B) Orifice meter (C) Pitot tube (D) All of these

Last Answer : Answer: Option D

For measuring flow by a Venturimeter, if should be installed in (A) Vertical line (B) Horizontal line (C) Inclined line with flow downward (D) In any direction and in any location

Description : For measuring flow by a Venturimeter, if should be installed in (A) Vertical line (B) Horizontal line (C) Inclined line with flow downward (D) In any direction and in any location

Last Answer : Answer: Option D

Which of the following instrument can be used for measuring speed of a submarine moving in deep sea? (A) Venturimeter (B) Orifice plate (C) Hot wire anemometer (D) Pitot tube

Description : Which of the following instrument can be used for measuring speed of a submarine moving in deep sea? (A) Venturimeter (B) Orifice plate (C) Hot wire anemometer (D) Pitot tube

Last Answer : Answer: Option D

Which of the following instrument can be used for measuring speed of an aeroplane? (A) Venturimeter (B) Orifice plate (C) Pitot tube(D) Rotameter

Description : Which of the following instrument can be used for measuring speed of an aeroplane? (A) Venturimeter (B) Orifice plate (C) Pitot tube (D) Rotameter

Last Answer : Answer: Option C

Which of the following instruments is used to measure flow on the application of Bernoulli's theorem? (A) Venturimeter (B) Orifice plate (C) Nozzle (D) All of the above

Description : Which of the following instruments is used to measure flow on the application of Bernoulli's theorem? (A) Venturimeter (B) Orifice plate (C) Nozzle (D) All of the above

Last Answer : Answer: Option D

Flow of water in a pipe about 3 metres in diameter can be measured by (A) Orifice plate (B) Venturimeter (C) Rotameter (D) Pitot tube

Description : Flow of water in a pipe about 3 metres in diameter can be measured by (A) Orifice plate (B) Venturimeter (C) Rotameter (D) Pitot tube

Last Answer : Answer: Option D