Nominal size of the discharge pipe of a pump is usually __________ the nominal size of the inlet pipe. (A) Smaller than (B) Larger than (C) Same as (D) Twice

Nominal size of the discharge pipe of a pump is usually __________ the
nominal size of the inlet pipe.
(A) Smaller than
(B) Larger than
(C) Same as
(D) Twice
by

1 Answer

Answer :

(A) Smaller than
by

Related questions

In centrifugal pump installation, (A) Pump is properly primed before starting (B) The diameter of the pipe at inlet as well as at outlet, is kept smaller than the delivery pipe (C) The motor may burn out if it is started with empty delivery pipe and with open gate valve (D) All the above

Description : In centrifugal pump installation,  (A) Pump is properly primed before starting  (B) The diameter of the pipe at inlet as well as at outlet, is kept smaller than the delivery pipe  (C) The ... out if it is started with empty delivery pipe and with open gate valve  (D) All the above 

Last Answer : (D) All the above 

A pump operating under specific conditions delivers insufficient quantity of liquid. This may be set right by (A) Decreasing the size of the inlet pipe (B) Increasing the size of the inlet pipe (C) Lowering the pump position (D) Both (B) and (C)

Description : A pump operating under specific conditions delivers insufficient quantity of liquid. This may be set right by (A) Decreasing the size of the inlet pipe (B) Increasing the size of the inlet pipe (C) Lowering the pump position (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

To handle smaller quantity of fluid at higher discharge pressure, use a __________ pump. (A) Reciprocating (B) Centrifugal (C) Volute (D) Rotary vacuum

Description : To handle smaller quantity of fluid at higher discharge pressure, use a __________ pump. (A) Reciprocating (B) Centrifugal (C) Volute (D) Rotary vacuum

Last Answer : (A) Reciprocating

Nominal size of a pipe is an indication of its __________ diameter. (A) Inner (B) Outer (C) Approximate (D) None of these

Description : Nominal size of a pipe is an indication of its __________ diameter. (A) Inner (B) Outer (C) Approximate (D) None of these

Last Answer : (C) Approximate

If a manager tries to form territories with equal sales potential, the territories will usually be unequal in geographic size; this will cause the salespersons with larger territories to A)develop larger income potentials. B)have to work longer and harder to generate a certain sales volume. C)work about the same amount, since potential is the same. D)have much larger sales than those salespeople with smaller territories.

Description : If a manager tries to form territories with equal sales potential, the territories will usually be unequal in geographic size; this will cause the salespersons with larger territories to A)develop ... potential is the same. D)have much larger sales than those salespeople with smaller territories.

Last Answer : B)have to work longer and harder to generate a certain sales volume.

Reciprocating pumps are not able to compete with the centrifugal pump for industrial use, mainly because these pumps have (A) Very low speeds (B) Smaller discharge (C) Higher capital &maintenance cost (D) High vibrations

Description : Reciprocating pumps are not able to compete with the centrifugal pump for industrial use, mainly because these pumps have (A) Very low speeds (B) Smaller discharge (C) Higher capital &maintenance cost (D) High vibrations

Last Answer : (C) Higher capital &maintenance cost

In case of unsteady fluid flow, conditions & flow pattern change with the passage of time at a position in a flow situation. Which of the following is an example of unsteady flow? (A) Discharge of water by a centrifugal pump being run at a constant rpm (B) Water flow in the suction and discharge pipe of a reciprocating pump (C) Water discharge from a vertical vessel in which constant level is maintained (D) Low velocity flow of a highly viscous liquid through a hydraulically smooth pipe

Description : In case of unsteady fluid flow, conditions & flow pattern change with the passage of time at a position in a flow situation. Which of the following is an example of unsteady flow? (A) ... level is maintained (D) Low velocity flow of a highly viscous liquid through a hydraulically smooth pipe

Last Answer : (B) Water flow in the suction and discharge pipe of a reciprocating pump

Which of the following is not the function of a volute casing provided in a centrifugal pump? (A) To reduce the head loss in discharge (B) To increase the pump efficiency (C) To collect liquid from the periphery of the impeller and to transmit it to the delivery pipe at constant velocity (D) To increase the pump discharge rate

Description : Which of the following is not the function of a volute casing provided in a centrifugal pump? (A) To reduce the head loss in discharge (B) To increase the pump efficiency (C) To collect liquid ... and to transmit it to the delivery pipe at constant velocity (D) To increase the pump discharge rate

Last Answer : Option D

The peripheral velocity at inlet of a centrifugal pump having inlet diameter of 25 cms and rotating at 950 rpm is __________ m/sec. (A) 1.8 (B) 12.4 (C) 186.2 (D) 736.4

Description : The peripheral velocity at inlet of a centrifugal pump having inlet diameter of 25 cms and rotating at 950 rpm is __________ m/sec. (A) 1.8 (B) 12.4 (C) 186.2 (D) 736.4

Last Answer : (B) 12.4

Nominal Pipe Size (NPS) of a pipe less than 12 inches in diameter indicates its(A) Inner diameter(B) Outer diameter(C) Thickness(D) Neither inner nor outer diameter

Description : Nominal Pipe Size (NPS) of a pipe less than 12 inches in diameter indicates its (A) Inner diameter (B) Outer diameter (C) Thickness (D) Neither inner nor outer diameter

Last Answer : (D) Neither inner nor outer diameter

With increase in the schedule number of a pipe of a particular nominal size, the (A) Wall thickness also increases (B) I.D. of the pipe decreases (C) O.D. of the pipe remains constant (D) All (A), (B) and (C)

Description : With increase in the schedule number of a pipe of a particular nominal size, the (A) Wall thickness also increases (B) I.D. of the pipe decreases (C) O.D. of the pipe remains constant (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The nominal size of a hose pipe is specified by its (A) I.D. (B) O.D. (C) Thickness (D) None of these

Description : The nominal size of a hose pipe is specified by its (A) I.D. (B) O.D. (C) Thickness (D) None of these

Last Answer : (A) I.D.

The pipe wall thickness is minimum for a pipe of given nominal size having schedule number (A) 160 (B) 120 (C) 80 (D) 40

Description : The pipe wall thickness is minimum for a pipe of given nominal size having schedule number (A) 160 (B) 120 (C) 80 (D) 40

Last Answer : (D) 40

If discharge of a pump is 0.16 cumecs, the economic diameter of pipe, is (A) 0.488 m (B) 4.88 cm (C) 48.8 cm (D) 4.88 m

Description : If discharge of a pump is 0.16 cumecs, the economic diameter of pipe, is  (A) 0.488 m  (B) 4.88 cm  (C) 48.8 cm  (D) 4.88 m 

Last Answer : (A) 0.488 m 

A double acting reciprocating pump compared to a single acting pump (of almost same size working under same pressure levels) would give almost double (A) Head (B) Discharge (C) Efficiency (D) None of these

Description : A double acting reciprocating pump compared to a single acting pump (of almost same size working under same pressure levels) would give almost double (A) Head (B) Discharge (C) Efficiency (D) None of these

Last Answer : (B) Discharge

Is Alaska larger than Texas same size or smaller?

Description : Is Alaska larger than Texas same size or smaller?

Last Answer : Alaska is larger

Clinical /Proximal in some papers/ caries on radiographs are seen: M07************ A. Smaller than the real one B. Larger than the real one C. The same size

Description : Clinical /Proximal in some papers/ caries on radiographs are seen: M07************ A. Smaller than the real one B. Larger than the real one C. The same size

Last Answer : A. Smaller than the real one

A thin double-concave lens produces images which are: w) larger than the object x) smaller than the object y) the same size as the object z) one cannot tell from this information

Description : A thin double-concave lens produces images which are: w) larger than the object x) smaller than the object y) the same size as the object z) one cannot tell from this information

Last Answer : ANSWER: X -- SMALLER THAN THE OBJECT

Cavitation in a centrifugal pump can be avoided by keeping the (A) Inlet pressure high (B) Outlet pressure low (C) Inlet pressure low (D) Outlet pressure high

Description : Cavitation in a centrifugal pump can be avoided by keeping the (A) Inlet pressure high (B) Outlet pressure low (C) Inlet pressure low (D) Outlet pressure high

Last Answer : (A) Inlet pressure high

Delivery of insufficient quantity of liquid by a pump may be caused by (A) Air leak in the inlet (B) Low rpm (C) Too high a lift (D) All (A), (B) and (C)

Description : Delivery of insufficient quantity of liquid by a pump may be caused by (A) Air leak in the inlet (B) Low rpm (C) Too high a lift (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The specific speed of a pump is defined as the speed of a unit of such a size, that it (A) Delivers unit discharge at unit head (B) Requires unit power for unit head (C) Delivers unit discharge at unit power (D) None of these

Description : The specific speed of a pump is defined as the speed of a unit of such a size, that it (A) Delivers unit discharge at unit head (B) Requires unit power for unit head (C) Delivers unit discharge at unit power (D) None of these

Last Answer : (A) Delivers unit discharge at unit head

For attaining maximum efficiency, a Francis turbine runner is so designed as to result in radial discharge at exit. This is done by : a) Providing runner vane angle at inlet as 90o b) Providing guide vane angle at inlet as 90o c) Providing runner vane angle at exit as 90o d) Designing for absolute velocity at outlet to be inclined at 90o to direction of vane there

Description : For attaining maximum efficiency, a Francis turbine runner is so designed as to result in radial discharge at exit. This is done by : a) Providing runner vane angle at inlet as 90o b) Providing ... 90o d) Designing for absolute velocity at outlet to be inclined at 90o to direction of vane there

Last Answer : d) Designing for absolute velocity at outlet to be inclined at 90o to direction of vane there

Consider a centrifugal pump having a specific impeller diameter, fixed impeller speed pumping a liquid of constant density at a particular discharge capacity. With decrease in the capacity of the pump, the __________ decreases. (A) NPSH required (B) BHP required by the pump (C) Head of the liquid pumped (D) All (A), (B) and (C)

Description : Consider a centrifugal pump having a specific impeller diameter, fixed impeller speed pumping a liquid of constant density at a particular discharge capacity. With decrease in the capacity of the pump, the __________ decreases. (A) ... the pump (C) Head of the liquid pumped (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A compressor that takes suction at a pressure below atmospheric and discharge against atmospheric pressure is called a __________ pump. (A) Sump (B) Volute (C) Vacuum (D) Submerged

Description : A compressor that takes suction at a pressure below atmospheric and discharge against atmospheric pressure is called a __________ pump. (A) Sump (B) Volute (C) Vacuum (D) Submerged

Last Answer : (C) Vacuum

A centrifugal pump has the following specifications: Power = 4 H.P.; Speed = 800 rpm Head = 8 metres Flow = 1000 litres/minutes. If its speed is halved, the new discharge will be __________ litres/minute. (A) 500 (B) 200 (C) 1000 (D) 750

Description : A centrifugal pump has the following specifications: Power = 4 H.P.; Speed = 800 rpm Head = 8 metres Flow = 1000 litres/minutes. If its speed is halved, the new discharge will be __________ litres/minute. (A) 500 (B) 200 (C) 1000 (D) 750

Last Answer : (A) 500

Discharge from a 24 inch pipe of water at 10 ft/sec will be __________ ft 3 /sec. (A) 7.65 (B) 32.36 (C) 48.22 (D) 125.6

Description : Discharge from a 24 inch pipe of water at 10 ft/sec will be __________ ft 3 /sec. (A) 7.65 (B) 32.36 (C) 48.22 (D) 125.6

Last Answer : (D) 125.6

The maximum discharge through a circular channel takes place, when the depth of the fluid flow is __________ times the pipe diameter. (A) 0.25 (B) 0.5 (C) 0.66 (D) 0.95

Description : The maximum discharge through a circular channel takes place, when the depth of the fluid flow is __________ times the pipe diameter. (A) 0.25 (B) 0.5 (C) 0.66 (D) 0.95

Last Answer : (D) 0.95

People living in high altitudes (like mountains) usually have a -----? A. smaller number of Red Blood Cells B. larger number of Red Blood Cells (Answer) C. smaller number of White Blood Cells D. larger number of White Blood Cells

Description : People living in high altitudes (like mountains) usually have a -----? A. smaller number of Red Blood Cells B. larger number of Red Blood Cells (Answer) C. smaller number of White Blood Cells D. larger number of White Blood Cells

Last Answer : B. larger number of Red Blood Cells (Answer)

A tube mill as compared to a ball mill (A) Employs smaller balls (B) Gives finer size reduction but consumes more power (C) Has larger length/diameter ratio (>2 as compared to 1 for ball mill) (D) All (A), (B) and (C)

Description : A tube mill as compared to a ball mill (A) Employs smaller balls (B) Gives finer size reduction but consumes more power (C) Has larger length/diameter ratio (>2 as compared to 1 for ball mill) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick up the incorrect statement regarding a master trap from the following: (A) It is provided in between the lower end of the house drain and the street sewer (B) It is provided a cleaning eye at the top of the trap (C) The mica flap valve which opens inwards only, is fitted at the top of the inlet pipe (D) The water seal is less than that of ordinary traps

Description : Pick up the incorrect statement regarding a master trap from the following: (A) It is provided in between the lower end of the house drain and the street sewer (B) It is provided a cleaning eye at the ... fitted at the top of the inlet pipe (D) The water seal is less than that of ordinary traps

Last Answer : (D) The water seal is less than that of ordinary traps

Faucet A basically used as inlet pipe and Faucet B is used as outlet pipe. Faucet A and B both are opened simultaneously, all the time. When Faucet A fills the tank and Faucet B empty the tank, it will take thrice the time than when both the pipes fill the tank. When Faucet B is used for filling the tank, its efficiency remains constant. What is the ratio of efficiency of Faucet A and Faucet B respectively? a) 1:2 b) 2:1 c) 1:3 d) 3:1

Description : Faucet A basically used as inlet pipe and Faucet B is used as outlet pipe. Faucet A and B both are opened simultaneously, all the time. When Faucet A fills the tank and Faucet B empty the tank, it will take thrice the ... efficiency of Faucet A and Faucet B respectively? a) 1:2 b) 2:1 c) 1:3 d) 3:1

Last Answer : B Efficiency when both pipes used to fill = A + B And efficiency when Faucet A is used to fill and Faucet B is used to empty the tank = A-B So (A+B)/(A-B)=3/1 A/B+1/(A/B-1)=3/1 A/B+1=3(A/B-1) 3A/B-A/B=4 2A/B=4 A/B=2 Thus, the ratio of efficiency of Faucet A and B =2:1

Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter(B) A Venturimeter with a given gage difference discharges at a greater rate,when the flow is vertically downward through it, than when the flow is verticallyupward(C) For a given pressure difference, the discharge of gas is greater through aVenturimeter, when compressibility is taken into account, than when it isneglected(D) The overall pressure loss is the same in a given pipe line, whether aVenturimeter or a nozzle with the same throat dia is used

Description : Sele(A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meterct the correct statement. (B) A Venturimeter with a given gage difference discharges at a ... a given pipe line, whether a Venturimeter or a nozzle with the same throat dia is used

Last Answer : (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meterct the correct statement

Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter(B) A Venturimeter with a given gage difference discharges at a greater rate,when the flow is vertically downward through it, than when the flow is verticallyupward(C) For a given pressure difference, the discharge of gas is greater through aVenturimeter, when compressibility is taken into account, than when it isneglected(D) The overall pressure loss is the same in a given pipe line, whether aVenturimeter or a nozzle with the same throat dia is used

Description : Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter (B) A Venturimeter with a given gage difference discharges at a ... a given pipe line, whether a Venturimeter or a nozzle with the same throat dia is used

Last Answer : (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter

Mixing of air and fuel in the diesel engine occurs in a. injection pump b. carburetor c. engine cylinder d. inlet manifold

Description : Mixing of air and fuel in the diesel engine occurs in a. injection pump b. carburetor c. engine cylinder d. inlet manifold

Last Answer : ANSWER c. engine cylinder

Conversion of dynamic velocity head into static pressure head in a centrifugal pump is the result of : (a) Increasing area of flow between adjacent vanes from inlet to outlet (b) Difference in pressure between suction and delivery ends (c) Radial thrust in pumps (d) Stuffing Box

Description : Conversion of dynamic velocity head into static pressure head in a centrifugal pump is the result of : (a) Increasing area of flow between adjacent vanes from inlet to outlet (b) Difference in pressure between suction and delivery ends (c) Radial thrust in pumps (d) Stuffing Box

Last Answer : (b) Difference in pressure between suction and delivery ends

A leak in the bottom of a bunker can empty the full bunker in 4 hrs. An inlet pump fills water at the rate of 3 litres a min. when the bunker is full, the inlet is opened and due to the leak, the bunker is empty in 6 hrs. How many litres does the bunker field? A) 1160 litrs B) 1610 litres C) 2160 litres D) 2610 litres

Description : A leak in the bottom of a bunker can empty the full bunker in 4 hrs. An inlet pump fills water at the rate of 3 litres a min. when the bunker is full, the inlet is opened and due to the leak, ... hrs. How many litres does the bunker field? A) 1160 litrs B) 1610 litres C) 2160 litres D) 2610 litres

Last Answer :  C Work done by the inlet in 1 hr = (1/4 – 1/6) = (3-2/12) = 1/12 Work done by the inlet in 1 min = 1/12 * 1/60 = 1/720 Volume of 1/720 part = 3 litres Volume of whole = (720 * 3 )=2160 litres.

How too tight inlet pipe lock nut make purifier noisy?

Description : How too tight inlet pipe lock nut make purifier noisy?

Last Answer : Need answer

Air inlet valve in water mains, is generally provided at (A) Summit of the pipe (B) Upstream of sluice valve (C) Downstream of sluice valve (D) Both (a) and (c) of above

Description : Air inlet valve in water mains, is generally provided at (A) Summit of the pipe (B) Upstream of sluice valve (C) Downstream of sluice valve (D) Both (a) and (c) of above

Last Answer : (D) Both (a) and (c) of above

Explain why cations are smaller and anions are larger in size than their parent atom.

Description : Explain why cations are smaller and anions are larger in size than their parent atom.

Last Answer : Ans.The ionic radius of cation is always smaller than the parent atom because the loss of one or more electrons increases the effective nuclear charge. As a result, the force of attraction of ... the force of attraction of the nucleus for the electrons decreases and hence the ionic radii increases.

The position of three elements A, B and C in the periodic table shown below: a) State whether A is a metal or non-metal. b) State whether C is more reactive or less reactive than A. c) Will C be larger or smaller in size than B?

Description : The position of three elements A, B and C in the periodic table shown below: a) State whether A is a metal or non-metal. b) State whether C is more reactive or less reactive than A. c) Will C be larger or smaller in size than B?

Last Answer : a) Metals lie on the left side where as non-metals are B C placed on the right side of the periodic table. Group 17 is on the right side of the periodic table, thus element A is non-metal ... size decreases moving from left to right along a period. So atom C will be smaller in size than B.

Which of the following two quantities when same, makes one pipe system equivalent to another pipe system? (A) Head & discharge(B) Length & discharge(C) Length & diameter(D) Friction factor & diameter

Description : Which of the following two quantities when same, makes one pipe system equivalent to another pipe system? (A) Head & discharge (B) Length & discharge (C) Length & diameter (D) Friction factor & diameter

Last Answer : (A) Head & discharge

A 2" gate valve fitted in a pipe is replaced by a similar globe valve. Pressure drop in gate valve was Δp. For the same discharge, the pressure drop across globe valve is (A) Δp (B) < Δp (C) > Δp (D) Δp

Description : A 2" gate valve fitted in a pipe is replaced by a similar globe valve. Pressure drop in gate valve was Δp. For the same discharge, the pressure drop across globe valve is (A) Δp (B) < Δp (C) > Δp (D) Δp

Last Answer : (C) > Δp

In parallel pipe problems, the (A) Head loss is the same through each pipe (B) Discharge is the same through all the pipes (C) Total head loss is equal to the sum of the head losses through each pipe (D) None of these

Description : In parallel pipe problems, the (A) Head loss is the same through each pipe (B) Discharge is the same through all the pipes (C) Total head loss is equal to the sum of the head losses through each pipe (D) None of these

Last Answer : (A) Head loss is the same through each pipe

For lapped joints, which of the following is the minimum finished height of face? a) Not less than the nominal pipe wall. b) Not less than .25". c) At least .060". d) 3/8".

Description : For lapped joints, which of the following is the minimum finished height of face? a) Not less than the nominal pipe wall. b) Not less than .25". c) At least .060". d) 3/8".

Last Answer : a) Not less than the nominal pipe wall.

In turbulent flow, a rough pipe has the same friction factor as a smooth pipe (A) In the zone of complete turbulence (B) When the roughness projections are much smaller than the thickness of the laminar film (C) Everywhere in the transition zone (D) When the friction factor is independent of the Reynold's number

Description : In turbulent flow, a rough pipe has the same friction factor as a smooth pipe (A) In the zone of complete turbulence (B) When the roughness projections are much smaller than the thickness of ... ) Everywhere in the transition zone (D) When the friction factor is independent of the Reynold's number

Last Answer : (B) When the roughness projections are much smaller than the thickness of the laminar film

What are the options to make the text size smaller or larger ?

Description : What are the options to make the text size smaller or larger ?

Last Answer : Mark the text and if you press the text A there, the text will be in small letters. Thanks!

Pick up the correct statement from the following: A. The larger the sewer in size, more will be velocity B. The smaller the sewer in size, less will be velocity C. The larger the sewer in size, no deposition will take place D. The larger the sewer in size, deposition will take place

Description : Pick up the correct statement from the following: A. The larger the sewer in size, more will be velocity B. The smaller the sewer in size, less will be velocity C. The larger the sewer in size, no deposition will take place D. The larger the sewer in size, deposition will take place

Last Answer : ANS: D

What is the criterion for DNA fragments movement on agarose gel during gel electrophoresis ? (a) The smaller the fragment size, the farther it moves. (b) Positively charged fragments move to farther end. (c) Negatively charged fragments do not move. (d) The larger the fragment size, the farther it moves.

Description : What is the criterion for DNA fragments movement on agarose gel during gel electrophoresis ? (a) The smaller the fragment size, the farther it moves. (b) Positively charged fragments move to farther end. ... charged fragments do not move. (d) The larger the fragment size, the farther it moves.

Last Answer : (a) The smaller the fragment size, the farther it moves

In a constant level tube, size of the bubble remains constant because upper wall is (A) Of relatively larger radius (B) Of relatively smaller radius (C) Flat (D) Convex downwards

Description : In a constant level tube, size of the bubble remains constant because upper wall is (A) Of relatively larger radius (B) Of relatively smaller radius (C) Flat (D) Convex downwards

Last Answer : (A) Of relatively larger radius