The specific weight of water in S.I. units is taken as (A) 9.81 kN/m3 (B) 9.81 × 103 N/m3 (C) 9.81 × 10-6 N/mm3 (D) Any one of these

The specific weight of water in S.I. units is taken as
(A) 9.81 kN/m3
(B) 9.81 × 103
 N/m3
(C) 9.81 × 10-6 N/mm3
(D) Any one of these
by

1 Answer

Answer :

Answer: Option D
by

Related questions

Specific weight of Reinforced cement concrete is [ A ] 24 N/m3 [ B ] 24 kN/m3 [ C ] 25 N/m3 [ D ] 25 kN/m3

Description : Specific weight of Reinforced cement concrete is [ A ] 24 N/m3 [ B ] 24 kN/m3 [ C ] 25 N/m3 [ D ] 25 kN/m3

Last Answer : [ D ] 25 kN/m3

A vessel of 4 m3 contains oil which weighs 30 kN. The specific weight of the oil is (A) 4.5 kN/m3 (B) 6 kN/m3 (C) 7.5 kN/m3 (D) 10 kN/m3

Description : A vessel of 4 m3 contains oil which weighs 30 kN. The specific weight of the oil is (A) 4.5 kN/m3 (B) 6 kN/m3 (C) 7.5 kN/m3 (D) 10 kN/m3

Last Answer : Answer: Option C

The specific gravity of an oil whose specific weight is 7.85 kN/m3 , is (A) 0.8 (B) 1 (C) 1.2 (D) 1.6

Description : The specific gravity of an oil whose specific weight is 7.85 kN/m3 , is (A) 0.8 (B) 1 (C) 1.2 (D) 1.6

Last Answer : Answer: Option A

The power of a locomotive is 315 kW and the total weight of the train is 2000 kN. If the track resistance is 15 N per kN, the maximum speed that the locomotive can attain on level track will be a.43 kmph b.83 kmph c.103 kmph d.107 dynes e.38 kmph

Description : The power of a locomotive is 315 kW and the total weight of the train is 2000 kN. If the track resistance is 15 N per kN, the maximum speed that the locomotive can attain on level track will be a.43 kmph b.83 kmph c.103 kmph d.107 dynes e.38 kmph

Last Answer : e. 38 kmph

A soil has a bulk density of 22 kN/m3 and water content 10 %. The dry density of soil is (A) 18.6 kN/m3 (B) 20.0 kN/m3 (C) 22.0 kN/m3 (D) 23.2 kN/m3 Answer: Option

Description : A soil has a bulk density of 22 kN/m3 and water content 10 %. The dry density of soil is (A) 18.6 kN/m3 (B) 20.0 kN/m3 (C) 22.0 kN/m3 (D) 23.2 kN/m3

Last Answer : (B) 20.0 kN/m3

The atmospheric pressure at sea level is (A) 103 kN/m2 (B) 10.3 m of water (C) 760 mm of mercury (D) All of these

Description : The atmospheric pressure at sea level is (A) 103 kN/m2 (B) 10.3 m of water (C) 760 mm of mercury (D) All of these

Last Answer : Answer: Option D

Unit weight of P.C.C . in kN/m3 is (a) 24 KN/m3 (b) 25 kN/m3 (c) 20kN/m3 (d) 26 kN/m3

Description : Unit weight of P.C.C . in kN/m3 is (a) 24 KN/m3 (b) 25 kN/m3 (c) 20kN/m3 (d) 26 kN/m3

Last Answer : (a) 24 KN/m3

The unit weight of cement in kN/m3 (a) 25 kN/m3 (b) 24 kN/m3 (c) 20 kN/m3 (d) 16 kN/m3

Description : The unit weight of cement in kN/m3 (a) 25 kN/m3 (b) 24 kN/m3 (c) 20 kN/m3 (d) 16 kN/m3

Last Answer : (d) 16 kN/m3

The power of a locomotive is 315 kW and the total weight of the train is 2000 kN. If the track resistance is qN per kN, the maximum speed that the locomotive can attain on level track will be a.103 kmph b.83 kmph c.107 dynes d.43 kmph e.63 kmph

Description : The power of a locomotive is 315 kW and the total weight of the train is 2000 kN. If the track resistance is qN per kN, the maximum speed that the locomotive can attain on level track will be a.103 kmph b.83 kmph c.107 dynes d.43 kmph e.63 kmph

Last Answer : e. 63 kmph

149 The power transmitted through a pipe is (where w = Specific weight in N/m3 , and Q = Discharge in m 3 /s) (A) w × Q × H (B) w × Q × hf (C) w × Q (H - hf ) (D) w × Q (H + hf )

Description : 149 The power transmitted through a pipe is (where w = Specific weight in N/m3 , and Q = Discharge in m 3 /s) (A) w × Q × H (B) w × Q × hf (C) w × Q (H - hf ) (D) w × Q (H + hf )

Last Answer : Answer: Option C

Molecular volume of any perfect gas at 600 x 103 N/m2 and 27°C will be  (a) 4.17m3/kgmol  (b) 400 m3/kg mol  (c) 0.15 m3/kg mol  (d) 41.7 m3/kg mol  (e) 417m3/kgmol.

Description : Molecular volume of any perfect gas at 600 x 103 N/m2 and 27°C will be  (a) 4.17m3/kgmol  (b) 400 m3/kg mol  (c) 0.15 m3/kg mol  (d) 41.7 m3/kg mol  (e) 417m3/kgmol.

Last Answer : Answer : a

The bulk density of aggregates , is (a) kN/m3 (b) Kg/1tr (c) g/cm3 (d) All the above.

Description : The bulk density of aggregates , is (a) kN/m3 (b) Kg/1tr (c) g/cm3 (d) All the above.

Last Answer : (b) Kg/1tr

Modulus of elasticity of steel as per IS: 4561978 shall be taken as (A) 20 kN/cm² (B) 200 kN/cm² (C) 200 kN/mm² (D) 2 × 106 N/cm2

Description : Modulus of elasticity of steel as per IS: 4561978 shall be taken as (A) 20 kN/cm² (B) 200 kN/cm² (C) 200 kN/mm² (D) 2 × 106 N/cm2

Last Answer : Answer: Option C

The pressure intensity in kN/m2 (or kPa) at any point in a liquid is (where w = Specific weight of liquid, and h = Depth of liquid from the surface) (A) w (B) wh (C) w/h (D) h/w

Description : The pressure intensity in kN/m2 (or kPa) at any point in a liquid is (where w = Specific weight of liquid, and h = Depth of liquid from the surface) (A) w (B) wh (C) w/h (D) h/w

Last Answer : Answer: Option B

What is the specific weight of water at standard condition? (Formula: γ = ρg / k)  a. 1000 kgm/m3  b. 9.8066 m/s2  c. 1000 kgf/m3  d. None of the above

Description : What is the specific weight of water at standard condition? (Formula: γ = ρg / k)  a. 1000 kgm/m3  b. 9.8066 m/s2  c. 1000 kgf/m3  d. None of the above

Last Answer : 1000 kgf/m3

A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system (in SI units) is given below : Δ P/L = 375 × 10 3 VOM + 10.94 × 10 6 V2 OM (SI units) If water is to be used as the fluidising medium, the minimum fluidisation velocity, VOM is (A) 12 mm/s (B) 16 mm/s (C) 24 mm/s (D) 28 mm/s

Description : A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle ... fluidisation velocity, VOM is (A) 12 mm/s (B) 16 mm/s (C) 24 mm/s (D) 28 mm/s

Last Answer : (B) 16 mm/s

The weight of reinforced concrete, is generally taken as (A) 2200 kg/m3 (B) 2300 kg/m3 (C) 2400 kg/m3 (D) 2500 kg/m

Description : The weight of reinforced concrete, is generally taken as (A) 2200 kg/m3 (B) 2300 kg/m3 (C) 2400 kg/m3 (D) 2500 kg/m

Last Answer : Answer: Option C

A uniform body 3 m long, 2 m wide and 1 m deep floats in water. If the depth of immersion is 0.6 m, then the weight of the body is (A) 3.53 kN (B) 33.3 kN (C) 35.3 kN (D) None of these

Description : A uniform body 3 m long, 2 m wide and 1 m deep floats in water. If the depth of immersion is 0.6 m, then the weight of the body is (A) 3.53 kN (B) 33.3 kN (C) 35.3 kN (D) None of these

Last Answer : Answer: Option C

PROBLEM EA Sample of moist soil has a water content of 20.0% and the moist unit weight of 21.09 KN/cu.meter. The specific gravity of the soil is 2.75. Compute the degree of saturation and the value of porosity?

Description : PROBLEM EA Sample of moist soil has a water content of 20.0% and the moist unit weight of 21.09 KN/cu.meter. The specific gravity of the soil is 2.75. Compute the degree of saturation and the value of porosity?

Last Answer : two seconds

The modules of elasticity of steel shall be taken as (a) 100kN/mm2 (b) 200 kN/mm2 (c) 250 kN/mm2 (d) 300 kN/mm2

Description : The modules of elasticity of steel shall be taken as (a) 100kN/mm2 (b) 200 kN/mm2 (c) 250 kN/mm2 (d) 300 kN/mm2

Last Answer : (b) 200 kN/mm2

Utilizing the answer to the previous problem, estimate the overall or average increase in temperature ( ΔT) of the concrete roof from the energy absorbed from the sun during a12hour day. Assume that all of the radiation absorbed goes into heating the roof. The specific heat of concrete is about 900 J/kg, and the density is about 2,300 kg/m3 .  a. 7.9 °C  b. 8.9°C  c. 9.9°C  d. 10.9°C formula: ΔQ = m c ΔT

Description : Utilizing the answer to the previous problem, estimate the overall or average increase in temperature ( ΔT) of the concrete roof from the energy absorbed from the sun during a12hour day. Assume that all of the radiation absorbed goes into ... °C  b. 8.9°C  c. 9.9°C  d. 10.9°C formula: ΔQ = m c ΔT

Last Answer : 7.9 °C

The intensity of active earth pressure at a depth of 10 metres in dry cohesionless sand with an angle of internal friction of 30° and with a weight of 1.8 t/m3 , is (A) 4 t/m2 (B) 5 t/m2 (C) 6 t/m2 (D) 7 t/m2

Description : The intensity of active earth pressure at a depth of 10 metres in dry cohesionless sand with an angle of internal friction of 30° and with a weight of 1.8 t/m3 , is (A) 4 t/m2 (B) 5 t/m2 (C) 6 t/m2 (D) 7 t/m2

Last Answer : Answer: Option C

What is the S.I. unit of sectional modulus? a. mm4 b. mm3 c. mm2 d. m

Description : What is the S.I. unit of sectional modulus? a. mm4 b. mm3 c. mm2 d. m

Last Answer : b. mm3

A masonry dam (density = 20,000 N/m3 ) 6 m high, one metre wide at the top and 4 m wide at the base, has vertical water face. The minimum stress at the base of the dam when the reservoir is full, will be (A) 75 N/m2 (B) 750 N/m2 (C) 7500 N/m2 (D) 75000 N/m

Description : A masonry dam (density = 20,000 N/m3 ) 6 m high, one metre wide at the top and 4 m wide at the  base, has vertical water face. The minimum stress at the base of the dam when the reservoir is  full, will be  (A) 75 N/m2 (B) 750 N/m2 (C) 7500 N/m2 (D) 75000 N/m

Last Answer : (C) 7500 N/m

The electric intensity at a distance of 1m from the point charge is 1μC is: (a) 9 × 109 N/C (b) 9 × 106 N/C (c) 9 × 103 N/C (d) 9 N/C

Description : The electric intensity at a distance of 1m from the point charge is 1μC is: (a) 9 × 109 N/C (b) 9 × 106 N/C (c) 9 × 103 N/C (d) 9 N/C

Last Answer : c) 9 × 103 N/C

What is the maximum shear stress induced in a solid shaft of 50 mm diameter which is subjected to both bending moment and torque of 300 kN.mm and 200 kN.mm respectively? a. 9.11 N/mm2 b. 14.69 N/mm2 c. 16.22 N/mm2 d. 20.98 N/mm2

Description : What is the maximum shear stress induced in a solid shaft of 50 mm diameter which is subjected to both bending moment and torque of 300 kN.mm and 200 kN.mm respectively? a. 9.11 N/mm2 b. 14.69 N/mm2 c. 16.22 N/mm2 d. 20.98 N/mm2

Last Answer : b. 14.69 N/mm2

What is the shear stress acting along the neutral axis of triangular beam section, with base 60 mm and height 150 mm, when shear force of 30 kN acts? a. 15.36 N/mm2 b. 10.6 N/mm2 c. 8.88 N/mm2 d. Insufficient data

Description : What is the shear stress acting along the neutral axis of triangular beam section, with base 60 mm and height 150 mm, when shear force of 30 kN acts? a. 15.36 N/mm2 b. 10.6 N/mm2 c. 8.88 N/mm2 d. Insufficient data

Last Answer : c. 8.88 N/mm2

A water tank contains 1.3 m deep water. The pressure exerted by the water per metre length of the tank is (A) 2.89 kN (B) 8.29 kN (C) 9.28 kN (D) 28.9 kN

Description : A water tank contains 1.3 m deep water. The pressure exerted by the water per metre length of the tank is (A) 2.89 kN (B) 8.29 kN (C) 9.28 kN (D) 28.9 kN

Last Answer : Answer: Option B

A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system (in SI units) is given below: Δ P/L = 375 × 10 3 VOM + 10.94 × 10 6 V2 OM (SI units) If water is to be used as the fluidising medium, in actual operation, the above bed has a height = 1 m. What is the porosity of the fluidised bed? (A) 0.2 (B) 0.5 (C) 0.7 (D) 0.8

Description : A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system ... What is the porosity of the fluidised bed? (A) 0.2 (B) 0.5 (C) 0.7 (D) 0.8

Last Answer : (C) 0.7

Mass of Earth when it's radius is 6400 km and gravitational field strength is 9.81 N kg-1 is A. 6.0 × 1024 kg B. 5 × 1023 kg C. 40 × 109 kg D. 9 × 1024 kg

Description : Mass of Earth when it's radius is 6400 km and gravitational field strength is 9.81 N kg-1 is A. 6.0 × 1024 kg B. 5 × 1023 kg C. 40 × 109 kg D. 9 × 1024 kg

Last Answer : 5 × 1023 kg

Calculate the recoverable waste heat (Q, in kCal/hour) from flue gases using the followingparameters: V (flow rate of the substance) 2000 m3/hr r (density of the flue gas): 0.9 kg/m3 Cp (specific heat of the substance): 0.20 kCal/kg oC DT (temperature difference): 120 oC h (recovery factor): 50% a. 21600 b. 43200 c. 25600 d. 34000

Description : Calculate the recoverable waste heat (Q, in kCal/hour) from flue gases using the followingparameters: V (flow rate of the substance) 2000 m3/hr r (density of the flue gas): 0.9 kg/m3 Cp (specific heat ... (temperature difference): 120 oC h (recovery factor): 50% a. 21600 b. 43200 c. 25600 d. 34000

Last Answer : 21600

19. The density of a liquid in kg/m3 is numerically equal to its specific gravity. A) True B) False

Description : 19. The density of a liquid in kg/m3 is numerically equal to its specific gravity. A) True B) False

Last Answer : A

An odd shaped body weighing 7.5 kg and occupying 0.01 m3 volume will be completely submerged in a fluid having specific gravity of (A) 1 (B) 1.2 (C) 0.8 (D) 0.75

Description : An odd shaped body weighing 7.5 kg and occupying 0.01 m3 volume will be completely submerged in a fluid having specific gravity of (A) 1 (B) 1.2 (C) 0.8 (D) 0.75

Last Answer : Answer: Option D

A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural frequency (f n ), respectively, are a) 0.471 and 1.19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz

Description : A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural ... , are a) 0.471 and 1.19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz

Last Answer : a) 0.471 and 1.19 Hz

A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural frequency (f n ), respectively, are a) 0.471 and 1.19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz d) 0.666 and 8.50 Hz

Description : A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural ... .19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz d) 0.666 and 8.50 Hz

Last Answer : a) 0.471 and 1.19 Hz

A 30-m vertical column of fluid (density 1878 kg/m3 ) is located where g= 9.65 mps2 . Find the pressure at the base of the column. (Formula: pg= gρhg/k )  a. 543680 N/m2  b. 543.68 kPa (gauge)  c. Both a & b  d. None of the above

Description : A 30-m vertical column of fluid (density 1878 kg/m3 ) is located where g= 9.65 mps2 . Find the pressure at the base of the column. (Formula: pg= gρhg/k )  a. 543680 N/m2  b. 543.68 kPa (gauge)  c. Both a & b  d. None of the above

Last Answer : Both a & b

An object having 10 kg mass weighs 9.81 kg on a spring balance. The value of 'g' at this place is (A) 10 m/sec² (B) 9.81 m/sec² (C) 9.75 m/sec² (D) 9 m/sec

Description : An object having 10 kg mass weighs 9.81 kg on a spring balance. The value of 'g' at this place is (A) 10 m/sec² (B) 9.81 m/sec² (C) 9.75 m/sec² (D) 9 m/sec

Last Answer : Answer: Option A

What is the volume of a prism is 35 cm.what is this prism measured in mm3?

Description : What is the volume of a prism is 35 cm.what is this prism measured in mm3?

Last Answer : 34

What is the volume of a prism is 35 cm.what is this prism measured in mm3?

Description : What is the volume of a prism is 35 cm.what is this prism measured in mm3?

Last Answer : 34

In 70 kg patient one unit of platelet concentrate should increase platelet count A. 2000 - 5000 mm3 B. 5000 - 10000 mm3 C. 10000 - 20000 mm3 D. More than 20000 mm3

Description : In 70 kg patient one unit of platelet concentrate should increase platelet count A. 2000 - 5000 mm3 B. 5000 - 10000 mm3 C. 10000 - 20000 mm3 D. More than 20000 mm3

Last Answer : Ans: B

More than 500 CD4+ T lymphocytes/mm3 indicates which stage of HIV infection? a) CDC category A - HIV asymptomatic More than 500 CD4+ T lymphocytes/mm3 indicates CDC category A - HIV asymptomatic.

Description : More than 500 CD4+ T lymphocytes/mm3 indicates which stage of HIV infection? a) CDC category A - HIV asymptomatic More than 500 CD4+ T lymphocytes/mm3 indicates CDC category A - HIV asymptomatic. b) ... CDC category C - AIDS Less than 200 CD4+ T lymphocytes/mm3 indicates CDC category C - AIDS.

Last Answer : a) CDC category A - HIV asymptomatic More than 500 CD4+ T lymphocytes/mm3 indicates CDC category A - HIV asymptomatic.

The unit of surface tension is (A) N/m (B) N/m2 (C) N/m3 (D) N-m

Description : The unit of surface tension is (A) N/m (B) N/m2 (C) N/m3 (D) N-m

Last Answer : Answer: Option A

Evaluate each of the following: (i) (103)3 (ii) (98)3 (iii) (9.9)3 (iv) (10.4)3 (v) (598)3 (vi) (99)3 -Maths 9th

Description : Evaluate each of the following: (i) (103)3 (ii) (98)3 (iii) (9.9)3 (iv) (10.4)3 (v) (598)3 (vi) (99)3 -Maths 9th

Last Answer : answer:

Critical speed of rotation, N (in rps - rotation per second) of a trammel is equal to (where, g = acceleration due to gravity = 9.81 m/sec 2 and, r = radius of trammel, metre.) (A) (1/2π). √(g/r) (B) (1/π). √(g/r) (C) ½ √(g/r) (D) 2π. √(g/r)

Description : Critical speed of rotation, N (in rps - rotation per second) of a trammel is equal to (where, g = acceleration due to gravity = 9.81 m/sec 2 and, r = radius of trammel, metre.) (A) (1/2π). √(g/r) (B) (1/π). √(g/r) (C) ½ √(g/r) (D) 2π. √(g/r)

Last Answer : (A) (1/2π). √(g/r)

Each 1 kg mass experiences force of A. 7 N B. 9.81 N C. 20 N D. 100 N

Description : Each 1 kg mass experiences force of A. 7 N B. 9.81 N C. 20 N D. 100 N

Last Answer :  9.81 N

Which one is not a 103 rule of evidence a. Maintaining a claim of error b. Aim of an offer of proof c. Plain error taken d. Destroying data

Description : Which one is not a 103 rule of evidence a. Maintaining a claim of error b. Aim of an offer of proof c. Plain error taken d. Destroying data

Last Answer : d. Destroying data

. Which one is not a 103 rule of evidence a. Maintaining a claim of error b. Aim of an offer of proof c. Plain error taken d. Destroying data

Description : . Which one is not a 103 rule of evidence a. Maintaining a claim of error b. Aim of an offer of proof c. Plain error taken d. Destroying data

Last Answer : d. Destroying data

For a homogeneous earth dam 50 m high having 2 m free broad, a flow net was constructed and the results were : Number of potential drops = 2.4 Number of flow channels = 0.4. If co-efficiency of permeability of the dam material is 3 × 10-3 cm3 /sec, the discharge per metre length of dam, is (A) 12 × 10-5 m3 /sec (B) 24 × 10-3 m3 /sec (C) 6 × 10-5 m3 /sec (D) 24 × 10-5 m3 /sec

Description : For a homogeneous earth dam 50 m high having 2 m free broad, a flow net was constructed and the results were : Number of potential drops = 2.4 Number of flow channels = 0.4. If co-efficiency of permeability of the dam material is ... 24 10-3 m3 /sec (C) 6 10-5 m3 /sec (D) 24 10-5 m3 /sec

Last Answer : (D) 24 × 10-5 m3 /sec

For a catchment area of 120 km², the equilibrium discharge in m3/hour of a Scurve obtained by the summation of 6 hour unit hydro graph is (A) 0.2 × 106 (B) 0.6 × 106 (C) 2.4 × 106 (D) 7.2 × 10

Description : For a catchment area of 120 km², the equilibrium discharge in m3/hour of a Scurve obtained by the summation of 6 hour unit hydro graph is (A) 0.2 × 106 (B) 0.6 × 106 (C) 2.4 × 106 (D) 7.2 × 10

Last Answer : Answer: Option A