The unit weight of cement in kN/m3 (a) 25 kN/m3 (b) 24 kN/m3 (c) 20 kN/m3 (d) 16 kN/m3

The unit weight of cement in kN/m3
(a) 25 kN/m3
(b) 24 kN/m3
(c) 20 kN/m3
(d) 16 kN/m3
by

1 Answer

Answer :

(d) 16 kN/m3
by

Related questions

Specific weight of Reinforced cement concrete is [ A ] 24 N/m3 [ B ] 24 kN/m3 [ C ] 25 N/m3 [ D ] 25 kN/m3

Description : Specific weight of Reinforced cement concrete is [ A ] 24 N/m3 [ B ] 24 kN/m3 [ C ] 25 N/m3 [ D ] 25 kN/m3

Last Answer : [ D ] 25 kN/m3

Unit weight of P.C.C . in kN/m3 is (a) 24 KN/m3 (b) 25 kN/m3 (c) 20kN/m3 (d) 26 kN/m3

Description : Unit weight of P.C.C . in kN/m3 is (a) 24 KN/m3 (b) 25 kN/m3 (c) 20kN/m3 (d) 26 kN/m3

Last Answer : (a) 24 KN/m3

A soil has a bulk density of 22 kN/m3 and water content 10 %. The dry density of soil is (A) 18.6 kN/m3 (B) 20.0 kN/m3 (C) 22.0 kN/m3 (D) 23.2 kN/m3 Answer: Option

Description : A soil has a bulk density of 22 kN/m3 and water content 10 %. The dry density of soil is (A) 18.6 kN/m3 (B) 20.0 kN/m3 (C) 22.0 kN/m3 (D) 23.2 kN/m3

Last Answer : (B) 20.0 kN/m3

The specific gravity of an oil whose specific weight is 7.85 kN/m3 , is (A) 0.8 (B) 1 (C) 1.2 (D) 1.6

Description : The specific gravity of an oil whose specific weight is 7.85 kN/m3 , is (A) 0.8 (B) 1 (C) 1.2 (D) 1.6

Last Answer : Answer: Option A

The specific weight of water in S.I. units is taken as (A) 9.81 kN/m3 (B) 9.81 × 103 N/m3 (C) 9.81 × 10-6 N/mm3 (D) Any one of these

Description : The specific weight of water in S.I. units is taken as (A) 9.81 kN/m3 (B) 9.81 × 103 N/m3 (C) 9.81 × 10-6 N/mm3 (D) Any one of these

Last Answer : Answer: Option D

A vessel of 4 m3 contains oil which weighs 30 kN. The specific weight of the oil is (A) 4.5 kN/m3 (B) 6 kN/m3 (C) 7.5 kN/m3 (D) 10 kN/m3

Description : A vessel of 4 m3 contains oil which weighs 30 kN. The specific weight of the oil is (A) 4.5 kN/m3 (B) 6 kN/m3 (C) 7.5 kN/m3 (D) 10 kN/m3

Last Answer : Answer: Option C

The bulk density of aggregates , is (a) kN/m3 (b) Kg/1tr (c) g/cm3 (d) All the above.

Description : The bulk density of aggregates , is (a) kN/m3 (b) Kg/1tr (c) g/cm3 (d) All the above.

Last Answer : (b) Kg/1tr

The peak of a 4 hour flood hydrograph is 240 m3 /sec. If the rainfall excess is 80 mm and base flow which is constant is 40 m3 /sec, peak of 4hours unit hydrograph will be (A) 20 m3 /sec (B) 25 m3 /sec (C) 30 m3 /sec (D) 35 m3 /sec

Description : The peak of a 4 hour flood hydrograph is 240 m3 /sec. If the rainfall excess is 80 mm and base flow which is constant is 40 m3 /sec, peak of 4hours unit hydrograph will be (A) 20 m3 /sec (B) 25 m3 /sec (C) 30 m3 /sec (D) 35 m3 /sec

Last Answer : Answer: Option B

The expected out turn of brick work in cement mortar in foundation and plinth per mason per day, is (A) 1.00 m3 (B) 1.25 m3 (C) 1.50 m3 (D) 1.75 m3

Description : The expected out turn of brick work in cement mortar in foundation and plinth per mason per day, is (A) 1.00 m3 (B) 1.25 m3 (C) 1.50 m3 (D) 1.75 m3

Last Answer : (B) 1.25 m3

PROBLEM EA Sample of moist soil has a water content of 20.0% and the moist unit weight of 21.09 KN/cu.meter. The specific gravity of the soil is 2.75. Compute the degree of saturation and the value of porosity?

Description : PROBLEM EA Sample of moist soil has a water content of 20.0% and the moist unit weight of 21.09 KN/cu.meter. The specific gravity of the soil is 2.75. Compute the degree of saturation and the value of porosity?

Last Answer : two seconds

A rod, 120cm long and of diameter 3.0 cm is subjected to an axial pull of 18 kN. The stress in N/mm2 is. a. 22.57 b. 23.47 c. 24.57 d. 25.47

Description : A rod, 120cm long and of diameter 3.0 cm is subjected to an axial pull of 18 kN. The stress in N/mm2 is. a. 22.57 b. 23.47 c. 24.57 d. 25.47

Last Answer : d. 25.47

For 100 sq. m cement concrete (1 : 2: 4) 4 cm thick floor, the quantity of cement required, is (A) 0.90 m3 (B) 0.94 m3 (C) 0.98 m3 (D) 1.00 m3

Description : For 100 sq. m cement concrete (1 : 2: 4) 4 cm thick floor, the quantity of cement required, is (A) 0.90 m3 (B) 0.94 m3 (C) 0.98 m3 (D) 1.00 m3

Last Answer : (B) 0.94 m3

For 12 mm thick cement plastering 1 : 6 on 100 sq.m new brick work, the quantity of cement required, is (A) 0.200 m3 (B) 0.247 m3 (C) 0.274 m3 (D) 0.295 m

Description : For 12 mm thick cement plastering 1 : 6 on 100 sq.m new brick work, the quantity of cement required, is (A) 0.200 m3 (B) 0.247 m3 (C) 0.274 m3 (D) 0.295 m

Last Answer : (C) 0.274 m3

The expected out turn of cement concrete 1 : 2 : 4 per mason per day is (A) 1.5 m3 (B) 2.5 m3 (C) 3.5 m3 (D) 5.0 m3

Description : The expected out turn of cement concrete 1 : 2 : 4 per mason per day is (A) 1.5 m3 (B) 2.5 m3 (C) 3.5 m3 (D) 5.0 m3

Last Answer : (D) 5.0 m3

According to IS: 456-2000, the maximum cement content exclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3

Description : According to IS: 456-2000, the maximum cement content exclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3

Last Answer : [ C ] 450 kg/m3

According to IS:456 minimum cement content inclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3

Description : According to IS:456 minimum cement content inclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3

Last Answer : [ B ] 300 kg/m3

According to IS: 456-2000, the maximum cement content exclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3

Description : According to IS: 456-2000, the maximum cement content exclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3

Last Answer : [ C ] 450 kg/m3

According to IS:456 minimum cement content inclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3

Description : According to IS:456 minimum cement content inclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3

Last Answer : [ B ] 300 kg/m3

A mass of 1 kg is attached to two identical springs each with stiffness k = 20 kN/m as shown in the figure. Under frictionless condition, the natural frequency of the system in Hz is close to * 1 point (A) 32 (B) 23 (C) 16 (D) 11

Description : A mass of 1 kg is attached to two identical springs each with stiffness k = 20 kN/m as shown in the figure. Under frictionless condition, the natural frequency of the system in Hz is close to * 1 point (A) 32 (B) 23 (C) 16 (D) 11

Last Answer : (A) 32

What is the maximum shear stress induced in a solid shaft of 50 mm diameter which is subjected to both bending moment and torque of 300 kN.mm and 200 kN.mm respectively? a. 9.11 N/mm2 b. 14.69 N/mm2 c. 16.22 N/mm2 d. 20.98 N/mm2

Description : What is the maximum shear stress induced in a solid shaft of 50 mm diameter which is subjected to both bending moment and torque of 300 kN.mm and 200 kN.mm respectively? a. 9.11 N/mm2 b. 14.69 N/mm2 c. 16.22 N/mm2 d. 20.98 N/mm2

Last Answer : b. 14.69 N/mm2

For maximum strength and durability minimum percentage of cement, by weight is (A) 15 % (B) 20 % (C) 25 % (D) 30 %

Description : For maximum strength and durability minimum percentage of cement, by weight is (A) 15 % (B) 20 % (C) 25 % (D) 30 %

Last Answer : Answer: Option D

A pressure of 25 m of head of water is equal to (A) 25 kN/ m² (B) 245 kN/ m² (C) 2500 kN/m² (D) 2.5 kN/ m²

Description : A pressure of 25 m of head of water is equal to (A) 25 kN/ m² (B) 245 kN/ m² (C) 2500 kN/m² (D) 2.5 kN/ m²

Last Answer : Answer: Option B

For a homogeneous earth dam 50 m high having 2 m free broad, a flow net was constructed and the results were : Number of potential drops = 2.4 Number of flow channels = 0.4. If co-efficiency of permeability of the dam material is 3 × 10-3 cm3 /sec, the discharge per metre length of dam, is (A) 12 × 10-5 m3 /sec (B) 24 × 10-3 m3 /sec (C) 6 × 10-5 m3 /sec (D) 24 × 10-5 m3 /sec

Description : For a homogeneous earth dam 50 m high having 2 m free broad, a flow net was constructed and the results were : Number of potential drops = 2.4 Number of flow channels = 0.4. If co-efficiency of permeability of the dam material is ... 24 10-3 m3 /sec (C) 6 10-5 m3 /sec (D) 24 10-5 m3 /sec

Last Answer : (D) 24 × 10-5 m3 /sec

A normally consolidated clay settled 10 mm when effective stress was increased from 100 kN/m² to 200 kN/m². If the effective stress is further increased from 200 kN/m² to 400 kN/m², then the settlement of the same clay is (A) 10 mm (B) 20 mm (C) 40 mm (D) None of the above

Description : A normally consolidated clay settled 10 mm when effective stress was increased from 100 kN/m² to 200 kN/m². If the effective stress is further increased from 200 kN/m² to 400 kN/m², then the settlement of the same clay is (A) 10 mm (B) 20 mm (C) 40 mm (D) None of the above

Last Answer : (A) 10 mm

Modulus of elasticity of steel as per IS: 4561978 shall be taken as (A) 20 kN/cm² (B) 200 kN/cm² (C) 200 kN/mm² (D) 2 × 106 N/cm2

Description : Modulus of elasticity of steel as per IS: 4561978 shall be taken as (A) 20 kN/cm² (B) 200 kN/cm² (C) 200 kN/mm² (D) 2 × 106 N/cm2

Last Answer : Answer: Option C

Consider the following statements: 1. Buried service lines should be avoided in an expansive soil region. 2. A swelling pressure less than 20 kN/m2 is not of much consequence. 3. If soil is not black in colour, it is unlikely to be an expansive soil. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. Buried service lines should be avoided in an expansive soil region. 2. A swelling pressure less than 20 kN/m2 is not of much consequence. 3. If soil is not black in colour, it is unlikely to be an ... (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (b) 1 & 2 only

A 1st class brick immersed in water for 24 hours, should not absorb water (by weight) more than (A) 10 % (B) 15 % (C) 20 % (D) 25 %

Description : A 1st class brick immersed in water for 24 hours, should not absorb water (by weight) more than (A) 10 % (B) 15 % (C) 20 % (D) 25 %

Last Answer : Answer: Option C

A uniform body 3 m long, 2 m wide and 1 m deep floats in water. If the depth of immersion is 0.6 m, then the weight of the body is (A) 3.53 kN (B) 33.3 kN (C) 35.3 kN (D) None of these

Description : A uniform body 3 m long, 2 m wide and 1 m deep floats in water. If the depth of immersion is 0.6 m, then the weight of the body is (A) 3.53 kN (B) 33.3 kN (C) 35.3 kN (D) None of these

Last Answer : Answer: Option C

The pressure intensity in kN/m2 (or kPa) at any point in a liquid is (where w = Specific weight of liquid, and h = Depth of liquid from the surface) (A) w (B) wh (C) w/h (D) h/w

Description : The pressure intensity in kN/m2 (or kPa) at any point in a liquid is (where w = Specific weight of liquid, and h = Depth of liquid from the surface) (A) w (B) wh (C) w/h (D) h/w

Last Answer : Answer: Option B

For a 50 kg cement bag water required, is (A) 16.5 litres (B) 18.5 litres (C) 20.5 litres (D) 22.5 litres

Description : For a 50 kg cement bag water required, is (A) 16.5 litres (B) 18.5 litres (C) 20.5 litres (D) 22.5 litres

Last Answer : Answer: Option D

For a clay slope of height of 10 m, the stability number is 0.05, = 2.0 t/m3 , C = 2.5 t/m2 , the critical height of the slope of the soil, is (A) 4.0 m (B) 12.5 m (C) 25.0 m (D) 15.0 m

Description : For a clay slope of height of 10 m, the stability number is 0.05, = 2.0 t/m3 , C = 2.5 t/m2 , the critical height of the slope of the soil, is (A) 4.0 m (B) 12.5 m (C) 25.0 m (D) 15.0 m

Last Answer : (C) 25.0 m

For a concrete mix 1:3:6 and water cement ratio 0.6 both by weight, the quantity of water required per bag, is (A) 10 kg (B) 12 kg (C) 14 kg (D) 16 k

Description : For a concrete mix 1:3:6 and water cement ratio 0.6 both by weight, the quantity of water required per bag, is (A) 10 kg (B) 12 kg (C) 14 kg (D) 16 kg

Last Answer : Answer: Option C

For a catchment area of 120 km², the equilibrium discharge in m3/hour of a Scurve obtained by the summation of 6 hour unit hydro graph is (A) 0.2 × 106 (B) 0.6 × 106 (C) 2.4 × 106 (D) 7.2 × 10

Description : For a catchment area of 120 km², the equilibrium discharge in m3/hour of a Scurve obtained by the summation of 6 hour unit hydro graph is (A) 0.2 × 106 (B) 0.6 × 106 (C) 2.4 × 106 (D) 7.2 × 10

Last Answer : Answer: Option A

The unit of surface tension is (A) N/m (B) N/m2 (C) N/m3 (D) N-m

Description : The unit of surface tension is (A) N/m (B) N/m2 (C) N/m3 (D) N-m

Last Answer : Answer: Option A

A cement concrete road is 1000 m long, 8 m wide and 15 cm thick over the sub-base of 10 cm thick gravel. The box cutting in road crust is (A) 500 m3 (B) 1000 m3 (C) 1500 m3 (D) 2000 m3

Description : A cement concrete road is 1000 m long, 8 m wide and 15 cm thick over the sub-base of 10 cm thick gravel. The box cutting in road crust is (A) 500 m3 (B) 1000 m3 (C) 1500 m3 (D) 2000 m3

Last Answer : (C) 1500 m3

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Description : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Last Answer : 22

In hierarchical routing with 4800 routers, what region and cluster sizes should be chosen to minimize the size of the routing table for a three layer hierarchy? (A) 10 clusters, 24 regions and 20 routers (B) 12 clusters, 20 regions and 20 routers (C) 16 clusters, 12 regions and 25 routers (D) 15 clusters, 16 regions and 20 routers

Description : In hierarchical routing with 4800 routers, what region and cluster sizes should be chosen to minimize the size of the routing table for a three layer hierarchy? (A) 10 clusters, 24 regions and 20 routers (B ... (C) 16 clusters, 12 regions and 25 routers (D) 15 clusters, 16 regions and 20 routers

Last Answer : (D) 15 clusters, 16 regions and 20 routers Rooters minimum, then regions minimum, then clusters minimum.

The maximum thickness of concrete floor of a cement warehouse, is (A) 10 cm (B) 15 cm (C) 20 cm (D) 25 cm

Description : The maximum thickness of concrete floor of a cement warehouse, is (A) 10 cm (B) 15 cm (C) 20 cm (D) 25 cm

Last Answer : (D) 25 cm

If 1500 g of water is required to have a cement paste 1875 g of normal consistency, the percentage of water is, (A) 20 % (B) 25 % (C) 30 % (D) 35 %

Description : If 1500 g of water is required to have a cement paste 1875 g of normal consistency, the percentage of water is, (A) 20 % (B) 25 % (C) 30 % (D) 35 %

Last Answer : (B) 25 %

The minimum thickness of walls built in cement mortar (1 : 6) for a single storey building, is (A) 10 cm (B) 15 cm (C) 20 cm (D) 25 cm

Description : The minimum thickness of walls built in cement mortar (1 : 6) for a single storey building, is (A) 10 cm (B) 15 cm (C) 20 cm (D) 25 cm

Last Answer : Answer: Option C

A masonry dam (density = 20,000 N/m3 ) 6 m high, one metre wide at the top and 4 m wide at the base, has vertical water face. The minimum stress at the base of the dam when the reservoir is full, will be (A) 75 N/m2 (B) 750 N/m2 (C) 7500 N/m2 (D) 75000 N/m

Description : A masonry dam (density = 20,000 N/m3 ) 6 m high, one metre wide at the top and 4 m wide at the  base, has vertical water face. The minimum stress at the base of the dam when the reservoir is  full, will be  (A) 75 N/m2 (B) 750 N/m2 (C) 7500 N/m2 (D) 75000 N/m

Last Answer : (C) 7500 N/m

For melting one tonne of cast iron (A) 700 m3 air is required (B) 20 kg limestone is required (C) One quintal coke is required (D) All the above

Description : For melting one tonne of cast iron (A) 700 m3 air is required (B) 20 kg limestone is required (C) One quintal coke is required (D) All the above

Last Answer : Answer: Option D

The intensity of active earth pressure at a depth of 10 metres in dry cohesionless sand with an angle of internal friction of 30° and with a weight of 1.8 t/m3 , is (A) 4 t/m2 (B) 5 t/m2 (C) 6 t/m2 (D) 7 t/m2

Description : The intensity of active earth pressure at a depth of 10 metres in dry cohesionless sand with an angle of internal friction of 30° and with a weight of 1.8 t/m3 , is (A) 4 t/m2 (B) 5 t/m2 (C) 6 t/m2 (D) 7 t/m2

Last Answer : Answer: Option C

The weight of reinforced concrete, is generally taken as (A) 2200 kg/m3 (B) 2300 kg/m3 (C) 2400 kg/m3 (D) 2500 kg/m

Description : The weight of reinforced concrete, is generally taken as (A) 2200 kg/m3 (B) 2300 kg/m3 (C) 2400 kg/m3 (D) 2500 kg/m

Last Answer : Answer: Option C

149 The power transmitted through a pipe is (where w = Specific weight in N/m3 , and Q = Discharge in m 3 /s) (A) w × Q × H (B) w × Q × hf (C) w × Q (H - hf ) (D) w × Q (H + hf )

Description : 149 The power transmitted through a pipe is (where w = Specific weight in N/m3 , and Q = Discharge in m 3 /s) (A) w × Q × H (B) w × Q × hf (C) w × Q (H - hf ) (D) w × Q (H + hf )

Last Answer : Answer: Option C

The weight of 1 m3 of brick earth, is about (A) 1200 kg (B) 1500 kg (C) 1800 kg (D) 2000 kg

Description : The weight of 1 m3 of brick earth, is about (A) 1200 kg (B) 1500 kg (C) 1800 kg (D) 2000 kg

Last Answer : Answer: Option C

If is the angle of repose of soil of weight w kg/m3 , the horizontal pressure p at a depth of h metres per metre length of wall, is (A) wh × [(1 - sin )/(1 + )] (B) (wh/2) × [(1 - sin )/(1 + )] (C) wh - sin )/(1 + )] (D) wh )/(1 - )

Description : If is the angle of repose of soil of weight w kg/m3 , the horizontal pressure p at a depth of h metres per metre length of wall, is (A) wh × [(1 - sin )/(1 + )] (B) (wh/2) × [(1 - sin )/(1 + )] (C) wh - sin )/(1 + )] (D) wh )/(1 - )

Last Answer : Answer: Option A