The bulk density of aggregates , is
(a) kN/m3
(b) Kg/1tr
(c) g/cm3
(d) All the above.

1 Answer

Answer :

(b) Kg/1tr

Related questions

Description : The bulk density of aggregates, is generally expressed as (A) tonnes/cubic metre (B) kg/cubic metre (C) kg/litre (D) g/cm3

Last Answer : (C) kg/litre

Description : A soil has a bulk density of 22 kN/m3 and water content 10 %. The dry density of soil is (A) 18.6 kN/m3 (B) 20.0 kN/m3 (C) 22.0 kN/m3 (D) 23.2 kN/m3

Last Answer : (B) 20.0 kN/m3

Description : A soil has bulk density 2.30 g/cm3 and water content 15 per cent, the dry density of the sample, is (A) 1.0 g/cm2 (B) 1.5 g/cm3 (C) 2.0 g/cm3 (D) 2.5 g/cm3

Last Answer : (C) 2.0 g/cm3

Description : The specific volume of air is expressed as the volume of: a. 1 kg of air at 101.325 kPa in cm3 b. 0.833 kg of air at standard pressure and temperature in m3 c. 1 kg of air at 101.325 ... d. 1 g of air occupied at any temperature and pressure e. 1 kg of air, regardless of temperature and pressure

Last Answer : Answer: C

Description : Capacity of flight conveyor in tons/hr is given by (where, W & D = width and depth of flight respectively in metre V = speed of the conveyor, metre/second ρ = bulk density of material, kg/m3 ) (A) 3.6 W.D.V.ρ (B) 3.6 W.D.V (C) 3.6 W.V.ρ (D) 3.6 D.V.ρ

Last Answer : (A) 3.6 W.D.V.ρ

Description : Bulk density of pulverised coal may be about __________ kg/m3 . (A) 100 (B) 500 (C) 1000 (D) 1500

Last Answer : (B) 500

Description : A liquid compressed in cylinder has a volume of 0.04 m3 at 50 kg/cm² and a volume of 0.039 m3 at 150 kg/cm². The bulk modulus of elasticity of liquid is (A) 400 kg/cm² (B) 4000 kg/cm² (C) (D)

Last Answer : Answer: Option B

Description : The bulk density of aggregates does not depend upon: (A) Size and shape of aggregates (B) Specific gravity of aggregates (C) Grading of aggregates (D) Size and shape of the container

Last Answer : Answer: Option D

Description : Pick up the incorrect statement from the following: (A) In properly graded aggregates, bulk density is more (B) In single size aggregates, bulk density is least (C) In single size aggregates, bulk density is maximum (D) None of these

Last Answer : Answer: Option C

Description : The bulk density of aggregates, depends upon (A) Shape (B) Grading (C) Compaction (D) All the above

Last Answer : Answer: Option D

Description : For a homogeneous earth dam 50 m high having 2 m free broad, a flow net was constructed and the results were : Number of potential drops = 2.4 Number of flow channels = 0.4. If co-efficiency of permeability of the dam material is ... 24 10-3 m3 /sec (C) 6 10-5 m3 /sec (D) 24 10-5 m3 /sec

Last Answer : (D) 24 × 10-5 m3 /sec

Description : A sample of saturated soil has 30% water content and the specific gravity of soil grains is 2.6. The dry density of the soil mass in g/cm3 , is (A) 1.47 (B) 1.82 (C) 1.91 (D) None of these

Last Answer : (D) None of these

Description : The specific gravity of an oil whose specific weight is 7.85 kN/m3 , is (A) 0.8 (B) 1 (C) 1.2 (D) 1.6

Last Answer : Answer: Option A

Description : The specific weight of water in S.I. units is taken as (A) 9.81 kN/m3 (B) 9.81 × 103 N/m3 (C) 9.81 × 10-6 N/mm3 (D) Any one of these

Last Answer : Answer: Option D

Description : A vessel of 4 m3 contains oil which weighs 30 kN. The specific weight of the oil is (A) 4.5 kN/m3 (B) 6 kN/m3 (C) 7.5 kN/m3 (D) 10 kN/m3

Last Answer : Answer: Option C

Description : Unit weight of P.C.C . in kN/m3 is (a) 24 KN/m3 (b) 25 kN/m3 (c) 20kN/m3 (d) 26 kN/m3

Last Answer : (a) 24 KN/m3

Description : The unit weight of cement in kN/m3 (a) 25 kN/m3 (b) 24 kN/m3 (c) 20 kN/m3 (d) 16 kN/m3

Last Answer : (d) 16 kN/m3

Description : Specific weight of Reinforced cement concrete is [ A ] 24 N/m3 [ B ] 24 kN/m3 [ C ] 25 N/m3 [ D ] 25 kN/m3

Last Answer : [ D ] 25 kN/m3

Description : A 30-m vertical column of fluid (density 1878 kg/m3 ) is located where g= 9.65 mps2 . Find the pressure at the base of the column. (Formula: pg= gρhg/k )  a. 543680 N/m2  b. 543.68 kPa (gauge)  c. Both a & b  d. None of the above

Last Answer : Both a & b

Description : For an incompressible fluid, the bulk modulus of elasticity is (A) 5 kg/m3 (B) ∞ N/m2 (C) 1 N (D) 0 N/m

Last Answer : (B) ∞ N/m2

Description : 19. The density of a liquid in kg/m3 is numerically equal to its specific gravity. A) True B) False

Last Answer : A

Description : The density of water is 1000 kg/m3 at (A) 0° C (B) 0° K (C) 4° C (D) 20° C

Last Answer : Answer: Option C

Description : The mass of 2.5 m3 of a certain liquid is 2 tonnes. Its mass density is (A) 200 kg/m3 (B) 400 kg/m3 (C) 600 kg/m3 (D) 800 kg/m

Last Answer : Answer: Option D

Description : A shot-put is a metallic sphere of radius 4.9 cm. If the density of the metal is 7.8 g/cm3. -Maths 9th

Last Answer : We have, the radius of a metallic sphere (r) = 4.9 cm ∴ Volume of the sphere = 4 / 3 πr3 = 4 / 3 × 22 / 7 × 4.9 × 4.9 × 4.9 = 493.005 cm3 ∵ Density of the metal used = 7.8 g/cm3 Hence, the mass of the shot - put = 493.005 × 7.8 = 3845.44

Description : A shot-put is a metallic sphere of radius 4.9 cm. If the density of the metal is 7.8 g/cm3. -Maths 9th

Last Answer : We have, the radius of a metallic sphere (r) = 4.9 cm ∴ Volume of the sphere = 4 / 3 πr3 = 4 / 3 × 22 / 7 × 4.9 × 4.9 × 4.9 = 493.005 cm3 ∵ Density of the metal used = 7.8 g/cm3 Hence, the mass of the shot - put = 493.005 × 7.8 = 3845.44

Description : Density of Milk is----? A. 1.024 g/cm3 B. 1.034 g/cm3 (Answer) C. 1.044 g/cm3 D. 1.054 g/cm3

Last Answer : B. 1.034 g/cm3 (Answer)

Description : The section modulus of a rectangular light beam 25 metres long is 12.500 cm3 . The beam is simply supported at its ends and carries a longitudinal axial tensile load of 10 tonnes in addition to a point load of ... 13.33 kg/cm2 compressive (C) 26.67 kg/cm2 tensile (D) 26.67 kg/cm2 compressive

Last Answer : (C) 26.67 kg/cm2 tensile

Description : A compacted soil sample using 10% moisture content has a weight of 200 g and mass unit weight of 2.0 g/cm3 . If the specific gravity of soil particles and water are 2.7 and 1.0, the degree of saturation of the soil is (A) 11.1 % (B) 55.6 % (C) 69.6 % (D) None of these

Last Answer : (B) 55.6 %

Description : A partially saturated sample of soil has a unit weight of 2.0 g/cm3 and specific gravity of soil particles is 2.6. If the moisture content in the soil is 20%, the degree of saturation is (A) 20 % (B) 77 % (C) 92 % (D) None of these

Last Answer : Answer: Option C

Description : An unsaturated 100 cm3 sample of soil weighs 190 g. If its dried weight is 160 g, water content of the soil, is (A) 0.188 (B) 0.288 (C) 0.388 (D) 0.588

Last Answer : Answer: Option A

Description : The general relationship between specific gravity (G), weight of water ( ), degree of saturation (Sr ), void ratio (e) and bulk density ( ), is (A) = (S - eSr ) /(1 + e) (B) = (G + eSr ) /(1 + e) (C) = (1 + e) /(G + Sr ) (D) = (1 - Sr ) e/(G + Sr )

Last Answer : (B) = (G + eSr ) /(1 + e)

Description : (4) water and petrol are immiscible with each other and petrol which forms the upper layer continues to burn Explanation: Water is not effective in extinguishing a fire caused by petrol because water and ... . Water cannot generally be used to extinguish a gasoline fire, unless used in a fine mist.

Last Answer : "All the four quantum numbers of two electrons in an atom are not the same." It is the law of (1) Hund’s (2) Exclusion Principle of Pauli (3) Uncertainty Principle of Giesenberg (4) Avogadro’s law

Description : The capacity of a classifier in 'tons of solid/hr' is given by (where, A = cross-sectional area in m2 , V = rising velocity of fluid in m/sec, S = percentage of solids in the suspension by volume, ρ = density of solids in kg/m3 ) (A) 3.6 AVS.ρ (B) 3.6 A.V.ρ (C) 3.6 A.S. ρ (D) 3.6 AVS/ρ

Last Answer : (A) 3.6 AVS.ρ

Description : Theoretical capacity of crushing rolls in tons/hr is given by (where, V = peripheral velocity, m/sec. W = width of rolls, m Dr = distance between rolls ρ = density of material to be crushed, kg/m3 here, V =πND where, N = speed of the rolls ... V.W.Dr.ρ (B) 3.6 V.W. ρ (C) 3.6 W.Dr.ρ (D) 3.6 V.W.Dr/ρ

Last Answer : (A) 3.6 V.W.Dr.ρ

Description : Density of Water is-----? A. 897 kg/m3 B. 997 kg/m3 (Answer) C. 1000 kg/m3 D. 1025 kg/m3

Last Answer : B. 997 kg/m3 (Answer)

Description : The density of Air is-------? A. 0.225 kg/m3 B. 1.025 kg/m3 C. 1.225 kg/m3 (Answer) D. 1.425 kg/m3

Last Answer : C. 1.225 kg/m3 (Answer)

Description : Hot water (0.01 m3 /min) enters the tube side of a counter current shell and tube heat exchanger at 80°C and leaves at 50°C. Cold oil (0.05 m3 /min) of density 800 kg/m3 and specific heat of ... mean temperature difference in °C is approximately (A) 32 (B) 37 (C) 45 (D) 50

Last Answer : (A) 32

Description : A bed consists of particles of density 2000 kg/m3 . If the height of the bed is 1.5 metres and its porosity 0.6, the pressure drop required to fluidise the bed by air is (A) 25.61 kPa (B) 11.77 kPa (C) 14.86 kPa (D) 21.13 kPa

Last Answer : (B) 11.77 kPa

Description : A gas (density = 1.5 kg/m3 , viscosity = 2 10 -5 kg/m.s) flowing through a packed bed (particle size = 0.5 cm, porosity = 0.5) at a superficial velocity of 2 m/s causes a pressure drop of 8400 Pa/m. The ... flowing at 3 m/s will be (A) 8400 Pa/m (B) 12600 Pa/m (C) 18900 Pa/m (D) 16800 Pa/m

Last Answer : (B) 12600 Pa/m

Description : . A 0.5 m high bed made up of a 1 mm dia glass sphere (density 2500 kg/m3 ) is to be fluidised by water (density 1000 kg/m3 ). If at the point of incipient fluidisation, the bed voidage is 40%, the pressure drop across the bed is (A) 4.4 KPa (B) 2.94 KPa (C) 3.7 KPa (D) None of these

Last Answer : (A) 4.4 KPa

Description : Calculate the recoverable waste heat (Q, in kCal/hour) from flue gases using the followingparameters: V (flow rate of the substance) 2000 m3/hr r (density of the flue gas): 0.9 kg/m3 Cp (specific heat ... (temperature difference): 120 oC h (recovery factor): 50% a. 21600 b. 43200 c. 25600 d. 34000

Last Answer : 21600

Description : Utilizing the answer to the previous problem, estimate the overall or average increase in temperature ( ΔT) of the concrete roof from the energy absorbed from the sun during a12hour day. Assume that all of the radiation absorbed goes into ... °C  b. 8.9°C  c. 9.9°C  d. 10.9°C formula: ΔQ = m c ΔT

Last Answer : 7.9 °C

Description : What is the unit of relative density? (1) kg/m (2) kg/m2 (3) kg/m3 (4) It has no unit

Last Answer : It has no unit

Description : Relative humidity is express in — a. g/m3 b. g/kg c. Percentage d. None of these

Last Answer : c. Percentage

Description : If 50 kg of fine aggregates and 100 kg of coarse aggregates are mixed in a concrete whose water cement ratio is 0.6, the weight of water required for harsh mix, is (A) 8 kg (B) 10 kg (C) 12 kg (D) 14 kg

Last Answer : Answer: Option C

Description : The 28 days cube strength of mass concrete using aggregates of maximum size 5 cm for gravity dams should be (A) Between 150 to 300 kg/cm2 (B) Between 350 to 600 kg/cm2 (C) Between 150 to 500 kg/cm2 (D) Below 200 kg/cm2

Last Answer : Answer: Option D

Description : For batching 1:3:6 concrete mix by volume, the ingredients required per bag of 50 kg cement, are: (A) 70 litres of sand and 120 litres of aggregates (B) 70 kg of sand and 140 litres of ... C) 105 litres of sand and 140 litres of aggregates (D) 105 litres of sand and 210 litres of aggregates

Last Answer : Answer: Option D

Description : The unit of bulk modulus of elasticity for a liquid in S.I. unit is (A) N (B) N/m (C) N/m2 (D) N/m3

Last Answer : (C) N/m2

Description : The weight of reinforced concrete, is generally taken as (A) 2200 kg/m3 (B) 2300 kg/m3 (C) 2400 kg/m3 (D) 2500 kg/m

Last Answer : Answer: Option C