Which of the following is not the unit of energy?
(A) kg m
(B) kcal
(C) watt
(D) watt hours
Description : Which of the following is not the unit of work, energy and heat? (A) kcal (B) kg m (C) kWhr (D) hp
Last Answer : (D) hp
Description : Which of the following is not the unit of power? (A) kW (kilowatt) (B) hp (horse power) (C) kcal/sec (D) kcal/kg sec
Last Answer : (D) kcal/kg sec
Description : The rate of energy transfer from a higher temperature to a lower temperature is measured in a) kcal b) Watt c) Watts per second d) none of the above.
Last Answer : b) Watt
Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The heat treatment cycle is as follows; Increase temperature from 30 OC to 850 OC in 3 hours. ... efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50
Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30) = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8
Description : Which of the following fuels has the highest calorific value per unit mass (kcal/kg)? (A) Coal (B) Kerosene (C) Natural gas (D) Furnace oil
Last Answer : (D) Furnace oil
Description : Calorific value of coal middling generated in coal washeries during washing of coal may be around __________ Kcal/kg. (A) 1000 (B) 4000 (C) 6000 (D) 8000
Last Answer : (B) 4000
Description : According to the definition of 1 KWh, a 100 watt bulb consumes one unit of electricity in _____. A. 1 Hour B. 5 Hours C. 8 Hours D. 10 Hours
Last Answer : ANSWER: D
Description : According to the definition of 1 KWh, a 100 watt bulb consumes one unit of electricity in-----? A. 2 hours B. 5 hours C. 8 hours D. 10 hours (Answer)
Last Answer : D. 10 hours (Answer)
Description : According to the definition of 1 KWh, a 100 watt bulb consumes one unit of electricity in------? A. 1 hours B. 5 hours C. 10 hours (Answer) D. 15 hours
Last Answer : C. 10 hours (Answer)
Description : Which of the following is not a unit of energy? a.Joule b.kW c.N-m d.Electron volt e.Watt-hour
Last Answer : b. kW
Description : The unit of energy in S.I. units is (a) watt (b) joule (c) joule/s (d) joule/m (e) joule m.
Last Answer : Answer : b
Description : The force which produces an acceleration of 1 m/sec2 in a mass of 1 kg is called a.100 ergs b.one Newton c.one watt d.One erg e.one joule
Last Answer : b. one Newton
Description : Which of the following statements(s) is/are true concerning human energy requirement? a. In normal subjects, less than 5% of basal energy requirement is spent on cardiac output and the ... d. Similar increases in energy expenditures are associated with elective surgery and trauma or thermal injury
Last Answer : Answer: a, c Basal energy requirements are measured with the subject at rest when no external work is being done; the energy is used mainly for transport and synthetic work within cells. A ... average-sized adult who sustains a major burn rarely may require more than 3500 kcal/day for maintenance
Description : Answer: b, c The body contains fuel reserves which it can mobilize and utilize during times of starvation or stress. By far the greatest energy component is fat, which is calorically dense since it ... liver and free glucose have a trivial caloric value of less than 1000 kcal for a 70 kg male
Last Answer : Which of the following statement(s) is/are true concerning the indications and administration of nutritional support to cancer patients? a. Preoperative nutritional support should be provided to all ... total parenteral nutrition solutions maintain integrity of the small bowel e. None of the above
Description : Internal energy of an element at 1 atm and 25° C is __________ kcal/kg.mole. (A) 0 (B) 273 (C) 25 (D) None of these
Last Answer : (A) 0
Description : In a 100 TPD Sponge Iron plant, the sponge iron is fed to the Induction melting furnace, producing molten steel at 88% yield. The Energy consumption details are as follows: Coal Consumption : 130 ... molten steel (product). 3. Total Energy Consumption of Plant in Tons of Oil Equivalent (TOE )
Last Answer : a) Specific Energy Consumption of Induction Melting Furnace Molten Steel Production from the Induction melting furnace per day = 100 x 88/100 = 88 TPD Total Energy Consumption of the Plant = 82400 kWh ... mark c) Total Energy consumption of Plant in ToE = 655864000/107 = 65.586 ToE
Description : Which one is not an energy consumption benchmark parameter? a) kcal/kWh of electricity generated b) kg/ oC. c) kW/ton of refrigeration d) kWh/kg of yarn
Last Answer : b) kg/ oC.
Description : What is the unit of thermal conductivity? (A) Kcal/hr. m2 °C (B) Kcal/hr.m.°C (C) Kcal/hr.m (D) Kcal/hr. °C
Last Answer : (B) Kcal/hr.m.°C
Description : How much energy does it take to run a 100 watt light bulb for 24 hours?
Last Answer : It is usually measured in kilowatt hours. 100 watt bulb X 24 hours= 2400 watts or 2.4 kilowatt hours.
Description : Pick up the incorrect statement from the following regarding fire hydrants (A) Fire hydrants are fitted in water mains at 100 m to 150 m apart at fire (B) The minimum water pressure hydrants, is kept 1.5 kg/ ... to 1.5 kg/cm2 is made available for 4 to 5 hours for constant use (D) None of these
Last Answer : (D) None of these
Description : 5. Unit of surface tension in S.I. unit is (A) Watt/m (B) Joule/m2 (C) Newton/m2 (D) Joule/m
Last Answer : Option B
Description : The unit of power in S.I. units is (A) Newton meter (B) Watt (C) Joule (D) Kilogram meter/sec
Last Answer : (B) Watt
Description : The unit of force in S.I. units is (A) Kilogram (B) Newton (C) Watt (D) Dyne
Last Answer : (B) Newton
Description : Heating value of coal is approximately (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg
Last Answer : Ans: C
Description : Hydrogen content in petroleum products varies from 12 to 15% (by weight). As a result the difference between gross and net heating value of petroleum fuels varies in the range of __________ kcal/kg. (A) 600-750 (B) 250-350 (C) 1000-1500 (D) 2000-2500
Last Answer : (A) 600-750
Description : Pick out the wrong statement. (A) Aromatics have higher specific gravity than paraffins (B) Gross calorific value (GCV) of petrofuels is equal to (12400 - 2100 ρ 2 ) where, ρ is the specific gravity ... volume basis (i.e., Kcal/litre) (D) Higher specific gravity of petrofuels means higher C/H ratio
Last Answer : (C) Heavier petrofuels have higher GCV on weight basis (i.e., Kcal/kg) but lower GCV on volume basis (i.e., Kcal/litre)
Description : Heat load in a cooling tower (A) Means the amount of heat thrown away (KCal/hr.) by the cooling tower (B) Is equal to the number of kg, of water circulated times the cooling range (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) & (B)
Description : Calorific value of high speed diesel is kcal/Kg (a) 9500 (b) 10550 (c) 11550 (d) 12500
Last Answer : (b) 10550
Description : Calorific value of furnace oil is about __________ Kcal/kg. (A) 10,000 (B) 15,000 (C) 5,000 (D) 20,000
Last Answer : (A) 10,000
Description : Calorific value of pitch creosote mixture (PCM) i.e., C.T.F.-200 is about (A) 8800 kcal/m3 (B) 8800 kcal/kg (C) Same as that of coal middling (D) 25000 kcal/kg
Last Answer : (B) 8800 kcal/kg
Description : Calorific value of bituminous coal may be around __________ Kcal/kg. (A) 500 (B) 1500 (C) 6500 (D) 20000
Last Answer : (C) 6500
Description : Calorific value of dry wood may be around __________ Kcal/kg. (A) 5 (B) 50 (C) 500 (D) 5000
Last Answer : (A) 5
Description : Calorific value of tar is about __________ Kcal/kg. (A) 8800 (B) 12000 (C) 14000 (D) 16000
Last Answer : (A) 8800
Description : Pick out the wrong statement. (A) Main constituents of LPG are propane and butane (B) C.V. of natural gas is about 10000 KCal/Nm3 (C) C.V. of LPG is about 26000 kcal/Nm3 (11500 kcal/kg) (D) L.P.G. is lighter than air
Last Answer : (D) L.P.G. is lighter than air
Description : For which pair of the fuel gases, calorific value (C.V.) of one fuel is almost double that of the other on volume basis (i.e., kcal/Nm3 ), while the C.V. is same on weight basis (i.e., kcal/kg)? (A) Propane and acetylene (B) Propane and LPG (C) Sewage gas and gobar gas (D) B.F. gas and coke oven gas
Last Answer : (A) Propane and acetylene
Description : Calorific value of a typical dry anthracite coal may be around __________ Kcal/kg. (A) 1000 (B) 4000 (C) 8000 (D) 15000
Last Answer : (C) 8000
Description : In case of physical adsorption, the heat of adsorption is of the order of __________ kcal/kg.mole. (A) 100 (B) 1000 (C) 10000 (D) 100000
Last Answer : (B) 1000
Description : The calorific value of HSD is — Kcal/kg a. 10000 b. 10550 c. 11100 d. 11650
Last Answer : b. 10550
Description : Pick out the wrong statement. (A) Cp of monatomic gases such as metallic vapor is about 5 kcal/kg.atom (B) The heat capacity of solid inorganic substance is exactly equal to the ... isolated system (D) At absolute zero temperature, the heat capacity for many pure crystalline substances is zero
Last Answer : (C) There is an increase in entropy, when a spontaneous change occurs in an isolated system
Description : Molar heat capacity of water in equilibrium with ice at constant pressure is __________ Kcal/kg mole. °K (A) 0 (B) ∞ (C) 50 (D) 100
Last Answer : (B) ∞
Description : The value of Cp & Cv respectively for monatomic gases in Kcal/kg Mole.°K are (A) 5 & 3 (B) 3.987 & 1.987 (C) 1.987 & 0.66 (D) 0.66 & 1.987
Last Answer : A) 5 & 3
Description : Latent heat of dry steam at atmospheric pressure is 539 Kcal/kg; which __________ with increase in the pressure of steam. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease
Last Answer : (A) Decreases
Description : For which pair of the fuel gases, calorific value (C.V.) of one fuel is almost double that of the other on volume basis (i.e., kcal/Nm3) while the C.V. is same on weight basis (i.e., kcal/kg)? (A ... and acetylene (B) Propane and LPG (C) Sewage gas and gobar gas (D) B.F gas and coke oven gas
Last Answer : D) B.F gas and coke oven gas
Description : The benchmarking parameter for air conditioning equipment is a) kW/Ton of Refrigeration b) kW/ kg of refrigerant handled c) kcal/m3 of chilled water d) Differential temperature across chiller
Last Answer : kW/Ton of Refrigeration
Description : The benchmarking parameter for air conditioning equipment is a) kW/Ton of Refrigeration b) kW/ kg of refrigerant handled c) kcal/m3 of chilled water d) Differential temperature across chiLLER
Description : Calculate the recoverable waste heat (Q, in kCal/hour) from flue gases using the followingparameters: V (flow rate of the substance) 2000 m3/hr r (density of the flue gas): 0.9 kg/m3 Cp (specific heat ... (temperature difference): 120 oC h (recovery factor): 50% a. 21600 b. 43200 c. 25600 d. 34000
Last Answer : 21600
Description : Heating value of coal is approximately in power plant (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg.
Last Answer : 5000-6500 kcal / kg
Description : n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In each batch about 120 ... dryer and the dryer efficiency is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.
Last Answer : Given that Qty of material dried per batch - 120 Kgs Moisture at inlet - 60% a. The quantity of moisture removed per batch. Water quantity in a wet batch - 120 x 0.6 = 72 Kgs. Quantity of bone dry ... - 48/0.95 = 50.5 Kgs. Equivalent water in a dry batch - 50.5 - 48 = 2.5 Kgs.
Description : The benchmarking parameter for a vapour compression refrigeration system is a) kW / kg of refrigerant used b) kcal / m3 of chilled water c) BTU / Ton of Refrigeration d) kW / Ton of Refrigeration
Last Answer : d) kW / Ton of Refrigeration