The yield point phenomenon observed in annealed low carbon steel is due to the presence of the following element. (A) Silicon (B) Carbon (C) Phosphorous (D) Chromium

The yield point phenomenon observed in annealed low carbon steel is
due to the presence of the following element.
(A) Silicon
(B) Carbon
(C) Phosphorous
(D) Chromium
by

1 Answer

Answer :

Option B
by

Related questions

__________ is added in low carbon steel to raise its yield point. (A) Sulphur (B) Phosphorous (C) Silicon (D) Manganese

Description : __________ is added in low carbon steel to raise its yield point. (A) Sulphur (B) Phosphorous (C) Silicon (D) Manganese

Last Answer : (D) Manganese

Transformer cores are laminated with (A) Low carbon steel. (B) Silicon sheet steel. (C) Nickel alloy steel. (D) Chromium sheet steel.

Description : Transformer cores are laminated with (A) Low carbon steel. (B) Silicon sheet steel. (C) Nickel alloy steel. (D) Chromium sheet steel.

Last Answer : (B) Silicon sheet steel.

The yield strength and tensile strength of low carbon steel may be improved by the addition of (A) Manganese (B) Chromium (C) Nickel (D) Vanadium

Description : The yield strength and tensile strength of low carbon steel may be improved by the addition of (A) Manganese (B) Chromium (C) Nickel (D) Vanadium

Last Answer : Answer: Option D

Solute atoms which cause yield point phenomenon in mild steel are/is (A) Aluminium (B) Boron (C) Carbon (D) Nitrogen

Description : Solute atoms which cause yield point phenomenon in mild steel are/is (A) Aluminium (B) Boron (C) Carbon (D) Nitrogen

Last Answer : (C) Carbon

Which of the following exercises most powerful influence on the mechanical properties of steel? (A) Manganese (B) Carbon (C) Phosphorous (D) Silicon

Description : Which of the following exercises most powerful influence on the mechanical properties of steel? (A) Manganese (B) Carbon (C) Phosphorous (D) Silicon

Last Answer : (B) Carbon

Nickel and __________ are the alloying element added in steel to increase its toughness. (A) Molybdenum(B) Chromium(C) Vanadium(D) Silicon

Description : Nickel and __________ are the alloying element added in steel to increase its toughness. (A) Molybdenum (B) Chromium (C) Vanadium (D) Silicon

Last Answer : Option D

Work hardenable alloy steel used to make the bucket wheel excavators, blades of bulldozers and other earth moving equipments contain iron, carbon and (A) Manganese (B) Silicon (C) Nickel (D) Chromium

Description : Work hardenable alloy steel used to make the bucket wheel excavators, blades of bulldozers and other earth moving equipments contain iron, carbon and (A) Manganese (B) Silicon (C) Nickel (D) Chromium

Last Answer : (A) Manganese

Copper as conductor for cables is used as (a) annealed (b) hardened and tempered (c) hard drawn (d) alloy with chromium

Description : Copper as conductor for cables is used as (a) annealed (b) hardened and tempered (c) hard drawn (d) alloy with chromium

Last Answer : (a) annealed

Corrosion resistance of steel is increased by the addition of (A) Phosphorous and tungsten (B) Nickel and chromium (C) Lead and vanadium (D) Molybdenum and tungsten

Description : Corrosion resistance of steel is increased by the addition of (A) Phosphorous and tungsten (B) Nickel and chromium (C) Lead and vanadium (D) Molybdenum and tungsten

Last Answer : (B) Nickel and chromium

Addition of __________ to steel does not help in improving its machinability. (A) Sulphur (B) Silicon (C) Lead (D) Phosphorous

Description : Addition of __________ to steel does not help in improving its machinability. (A) Sulphur (B) Silicon (C) Lead (D) Phosphorous

Last Answer : (B) Silicon

Addition of __________ to steel does not help in improving its machinability. (A) Sulphur (B) Silicon (C) Lead (D) Phosphorous

Description : Addition of __________ to steel does not help in improving its machinability. (A) Sulphur (B) Silicon (C) Lead (D) Phosphorous

Last Answer : Option B

Which of the following alloy steels has the energy saving properties making it suitable for use in electrical machines? (A) Silicon steel (B) Chromium steel (C) Molybdenum steel (D) None of these

Description : Which of the following alloy steels has the energy saving properties making it suitable for use in electrical machines? (A) Silicon steel (B) Chromium steel (C) Molybdenum steel (D) None of these

Last Answer : (A) Silicon steel

Addition of __________ to steel does not impart hardness. (A) Nickel (B) Copper (C) Chromium (D) Silicon

Description : Addition of __________ to steel does not impart hardness. (A) Nickel (B) Copper (C) Chromium (D) Silicon

Last Answer : : Option B

Addition of __________ to steel does not impart hardness. (A) Nickel (B) Copper (C) Chromium (D) Silicon

Description : Addition of __________ to steel does not impart hardness. (A) Nickel (B) Copper (C) Chromium (D) Silicon

Last Answer : Option B

Silicon crystal can be converted to p-type semi-conductor by doping with (A) Phosphorous (B) Nitrogen (C) Carbon (D) Boron

Description : Silicon crystal can be converted to p-type semi-conductor by doping with (A) Phosphorous (B) Nitrogen (C) Carbon (D) Boron

Last Answer : Option D

The element used in the manufacture of safety matches is – (1) Phosphorous (2) Magnesium (3) Silicon (4) Sulphur

Description : The element used in the manufacture of safety matches is – (1) Phosphorous (2) Magnesium (3) Silicon (4) Sulphur

Last Answer : (1) Phosphorous Explanation: One end of a match is coated with a material that can be ignited by frictional heat generated by striking the match against a suitable surface. The coated end ... ," contains either phosphorus or phosphorus sesquisulfide as the active ingredient and gelatin as a binder.

The element used in the manufacture of safety matches is (1) Phosphorous (2) Magnesium (3) Silicon (4) Sulphur

Description : The element used in the manufacture of safety matches is (1) Phosphorous (2) Magnesium (3) Silicon (4) Sulphur

Last Answer : Phosphorous

Steel containing low percentage of nickel, chromium & tungsten are termed as the __________ steel. (A) Wrought (B) Tool (C) Alloy (D) Plain carbon

Description : Steel containing low percentage of nickel, chromium & tungsten are termed as the __________ steel. (A) Wrought (B) Tool (C) Alloy (D) Plain carbon

Last Answer : (D) Plain carbon

__________ is the most important element, which controls the physical properties of steel. (A) Manganese (B) Silicon (C) Carbon (D) Vanadium

Description : __________ is the most important element, which controls the physical properties of steel. (A) Manganese (B) Silicon (C) Carbon (D) Vanadium

Last Answer : (C) Carbon

Presence of phosphorous in metallurgical coal (A) Is not undesirable (B) Reduces its calorific value (C) Badly affects the quality of steel

Description : Presence of phosphorous in metallurgical coal (A) Is not undesirable (B) Reduces its calorific value (C) Badly affects the quality of steel

Last Answer : (C) Badly affects the quality of steel

Explain the effect of nickel, chromium, silicon, molybdenum addition on the properties of steel.

Description : Explain the effect of nickel, chromium, silicon, molybdenum addition on the properties of steel.

Last Answer : 1) Effect of Nickel as alloying Element: i) Provides toughness, corrosion resistance, and deep hardening. ii) Increases resistance to impact iii ) Improves tensile strength 2. Effect ... temper brittleness. iv) increases strength. V0 Mo-carbides help increase creepresistance at elevated temps

Manganese is added in low carbon steel to A. Make the steel tougher and harder B. Raise the yield point C. Make the steel ductile and of good bending qualities D. All of the above

Description : Manganese is added in low carbon steel to A. Make the steel tougher and harder B. Raise the yield point C. Make the steel ductile and of good bending qualities D. All of the above

Last Answer : C. Make the steel ductile and of good bending qualities

Presence of nickel & chromium in steel does not raise its (A) Elastic limit (B) Machining properties (C) Ductility (D) Resilience Answer: Option A

Description : Presence of nickel & chromium in steel does not raise its (A) Elastic limit (B) Machining properties (C) Ductility (D) Resilience Answer: Option A

Last Answer : Option A

Stainless steel resists corrosion due to (A) Carbon (B) Sulphur (C) Vanadium (D) Chromium

Description : Stainless steel resists corrosion due to (A) Carbon (B) Sulphur (C) Vanadium (D) Chromium

Last Answer : Answer: Option D

Addition of small amount of __________ to grey cast iron is done to produce nodular grey cast iron. (A) Manganese (B) Phosphorous (C) Magnesium (D) Chromium

Description : Addition of small amount of __________ to grey cast iron is done to produce nodular grey cast iron. (A) Manganese (B) Phosphorous (C) Magnesium (D) Chromium

Last Answer : Option C

Which of the following finds the least commercial use? (A) Pure iron (B) High silicon iron (C) Low carbon steel (D) High carbon steel

Description : Which of the following finds the least commercial use? (A) Pure iron (B) High silicon iron (C) Low carbon steel (D) High carbon steel

Last Answer : (A) Pure iron

In a good rimming steel (A) Carbon and silicon should be low (B) Silicon should be low but carbon should be high (C) Both silicon & carbon should be high (D) Silicon should be high but carbon should be low

Description : In a good rimming steel (A) Carbon and silicon should be low (B) Silicon should be low but carbon should be high (C) Both silicon & carbon should be high (D) Silicon should be high but carbon should be low

Last Answer : (A) Carbon and silicon should be low

Red short iron cracks when bent due to the presence of (A) Sulphur (B) Carbon (C) Phosphorus (D) Silicon

Description : Red short iron cracks when bent due to the presence of (A) Sulphur (B) Carbon (C) Phosphorus (D) Silicon

Last Answer : Answer: Option A

Pick out the wrong statement. (A) Cold cracking of a weld is due to the presence of hydrogen gas in the weld (B) True stress is given by, σ = σE (1 + εE), where σE and εE are engineering stress and engineering strain respectively (C) Phosphorous can be easily recovered in the iron blast furnace (D) High residual stress at the surface is beneficial for fatigue properties of a material

Description : Pick out the wrong statement. (A) Cold cracking of a weld is due to the presence of hydrogen gas in the weld (B) True stress is given by, σ = σE (1 + εE), where σE and εE ... in the iron blast furnace (D) High residual stress at the surface is beneficial for fatigue properties of a material

Last Answer : Option C

Which of the following is not a principal alloying element for the structural steel? (A) Molybdenum (B) Nickel (C) Manganese (D) Chromium

Description : Which of the following is not a principal alloying element for the structural steel? (A) Molybdenum (B) Nickel (C) Manganese (D) Chromium

Last Answer : (A) Molybdenum

Presence of silicon in steel (A) Is in the form of free Si (B) Indicates that steel is not deoxidised properly(C) Decreases the blow holes formation tendency in castings(D) None of these

Description : Presence of silicon in steel (A) Is in the form of free Si (B) Indicates that steel is not deoxidised properly (C) Decreases the blow holes formation tendency in castings (D) None of these

Last Answer : (C) Decreases the blow holes formation tendency in castings

Pick out the wrong statement. (A) Alloys are harder than their component elements (B) Presence of silicon in steel decreases its electrical resistance (C) Karbate is an acid resistant material of construction (D) Nichrome, a steel alloyed with 10% Ni and 20% Cr can be used upto a temperature of 1100°C

Description : Pick out the wrong statement. (A) Alloys are harder than their component elements (B) Presence of silicon in steel decreases its electrical resistance (C) Karbate is an acid resistant material of construction ... , a steel alloyed with 10% Ni and 20% Cr can be used upto a temperature of 1100°C

Last Answer : (B) Presence of silicon in steel decreases its electrical resistance

Presence of high phosphorous in cast iron increases its (A) Fluidity (B) Melting point (C) Shrinkage (D) Tensile strength

Description : Presence of high phosphorous in cast iron increases its (A) Fluidity (B) Melting point (C) Shrinkage (D) Tensile strength

Last Answer : (A) Fluidity

Bearings subjected to light load are made of (A) White metal (B) Phosphorous bronze (C) Monel (D) Silicon bronze

Description : Bearings subjected to light load are made of (A) White metal (B) Phosphorous bronze (C) Monel (D) Silicon bronze

Last Answer : (B) Phosphorous bronze

Yield of elemental phosphorous from rock phosphate is about __________ percent. (A) 1-2 (B) 15-25 (C) 40-45 (D) 60-65

Description : Yield of elemental phosphorous from rock phosphate is about __________ percent. (A) 1-2 (B) 15-25 (C) 40-45 (D) 60-65

Last Answer : (B) 15-25

To counteract the bad effects of strain hardening on a cold formed part, it must be (A) Tempered (B) Normalised (C) Annealed (D) Hardened

Description : To counteract the bad effects of strain hardening on a cold formed part, it must be (A) Tempered (B) Normalised (C) Annealed (D) Hardened

Last Answer : Option C

Which of the following is an important element of stainless steel. w) chromium x) magnesium y) copper z) nickel

Description : Which of the following is an important element of stainless steel. w) chromium x) magnesium y) copper z) nickel  

Last Answer : ANSWER: W -- CHROMIUM  

Which of the following has a very high carbide forming tendency in steels? (A) Silicon (B) Chromium (C) Nickel (D) Vanadium

Description : Which of the following has a very high carbide forming tendency in steels? (A) Silicon (B) Chromium (C) Nickel (D) Vanadium

Last Answer : (D) Vanadium

Mirage is observed in a desert due to the phenomenon of which reflection?

Description : Mirage is observed in a desert due to the phenomenon of which reflection?

Last Answer : Total reflection

The following are true about entopic phenomenon: a. it can be produced by cells in the vitreous b. it can be produced by palpation of the eyeballs c. the size of one's pupil can be observed with a pinhole d. asteroid hyalosis causes significant visual disturbance due to entopic phenomenon e. Haidinger's brushes are produced by the inner plexiform layers

Description : The following are true about entopic phenomenon: a. it can be produced by cells in the vitreous b. it can be produced by palpation of the eyeballs c. the size of one's ... significant visual disturbance due to entopic phenomenon e. Haidinger's brushes are produced by the inner plexiform layers

Last Answer : the size of one's pupil can be observed with a pinhole

1. Which nitrogen fixing bacteria is found in leguminuous plant? 2. A person to be qualified for standing in a panchayat election what age must have he attained? 3. Mirage is observed in a desert due to the phenomenon of which reflection? 4. What is the best representative of the acid igneous rocks? 5. During which Sikh Guru Arjun Dev was killed?

Description : 1. Which nitrogen fixing bacteria is found in leguminuous plant? 2. A person to be qualified for standing in a panchayat election what age must have he attained? 3. Mirage is observed in ... coal reserves of India are found in which state? 20. Which Sultan provided employment to unemployeds?

Last Answer : Answer : 1. Rizobium 2. 21 years 3. Total reflection 4. Granite 5. Jahangir 6. Karnataka 7. Foreign Institutional Investors 8. Mycorrhizae 9. Barren Island 10. Aurobindo Ghosh 11. M. Hidayatullah 12. ... 16. New Delhi 17. Muscles ear lobe 18. Neelam Sanjiva Reddy 19. Jharkhand 20. Firoz shah Tughlaq

Stainless steel contains which of the following? (a) Aluminium and Zinc (b) Chromium and Carbon (c) Zinc and Mercury (d) Copper and Cadmium

Description : Stainless steel contains which of the following? (a) Aluminium and Zinc (b) Chromium and Carbon (c) Zinc and Mercury (d) Copper and Cadmium

Last Answer : Ans:(b)

The important metal used with iron to produce stainless steel is – (1) Al (2) Chromium (3) Tin (4) Carbon

Description : The important metal used with iron to produce stainless steel is – (1) Al (2) Chromium (3) Tin (4) Carbon

Last Answer : (2) Chromium Explanation: Stainless steel is an alloy of iron with chromium. Chromium prevents its from corrosion. Stainless steel differs from carbon steel by the amount of chromium present.

Stainless steel is an alloy of - (1) chromium and carbon (2) chromium, carbon and iron (3) chromium and iron (4) carbon and iron

Description : Stainless steel is an alloy of - (1) chromium and carbon (2) chromium, carbon and iron (3) chromium and iron (4) carbon and iron

Last Answer : (2) chromium, carbon and iron Explanation: Steel is an alloy made by combining iron and other elements, the most common of these being carbon. When carbon is used, its content in the steel ... 11% chromium content by mass. Stainless steel differs from carbon steel by the amount of chromium present.

Which metal is added to steel to make it stainless steel? A. Chromium (Answer) B. Aluminium C. Carbon D. Copper

Description : Which metal is added to steel to make it stainless steel? A. Chromium (Answer) B. Aluminium C. Carbon D. Copper

Last Answer : A. Chromium (Answer)

Weld decay can be minimized by specifying steel with: a) Higher carbon level b) higher chromium level c) lower carbon level d) lower chromium level

Description : Weld decay can be minimized by specifying steel with: a) Higher carbon level b) higher chromium level c) lower carbon level d) lower chromium level

Last Answer : c) lower carbon level

Which of the following are alloying materials used the manufacture of stainless steel? w) Limestone and carbon x) Calcium oxide and oxygen y) Oxygen and sulfur dioxide z) Chromium and nickel

Description : Which of the following are alloying materials used the manufacture of stainless steel? w) Limestone and carbon x) Calcium oxide and oxygen y) Oxygen and sulfur dioxide z) Chromium and nickel

Last Answer : ANSWER: Z -- CHROMIUM AND NICKEL

The important metal used with iron to produce stainless steel is (1) Aluminium (2) Chromium (3) Tin (4) Carbon

Description : The important metal used with iron to produce stainless steel is (1) Aluminium (2) Chromium (3) Tin (4) Carbon 

Last Answer : Chromium

Stainless steel is an alloy of (1) chromium and carbon (2) chromium, carbon and iron (3) chromium and iron (4) carbon and iron

Description : Stainless steel is an alloy of (1) chromium and carbon (2) chromium, carbon and iron (3) chromium and iron (4) carbon and iron

Last Answer : chromium, carbon and iron