Which of the following exercises most powerful influence on the mechanical properties of steel? (A) Manganese (B) Carbon (C) Phosphorous (D) Silicon

Which of the following exercises most powerful influence on the
mechanical properties of steel?
(A) Manganese
(B) Carbon
(C) Phosphorous
(D) Silicon
by

1 Answer

Answer :

(B) Carbon
by

Related questions

__________ is added in low carbon steel to raise its yield point. (A) Sulphur (B) Phosphorous (C) Silicon (D) Manganese

Description : __________ is added in low carbon steel to raise its yield point. (A) Sulphur (B) Phosphorous (C) Silicon (D) Manganese

Last Answer : (D) Manganese

__________ is the most important element, which controls the physical properties of steel. (A) Manganese (B) Silicon (C) Carbon (D) Vanadium

Description : __________ is the most important element, which controls the physical properties of steel. (A) Manganese (B) Silicon (C) Carbon (D) Vanadium

Last Answer : (C) Carbon

Which of the following gradients exerts maximum influence on properties of steel? (A) Iron (B) Carbon (C) Manganese (D) Sulphur

Description : Which of the following gradients exerts maximum influence on properties of steel? (A) Iron (B) Carbon (C) Manganese (D) Sulphur

Last Answer : Answer: Option B

The yield point phenomenon observed in annealed low carbon steel is due to the presence of the following element. (A) Silicon (B) Carbon (C) Phosphorous (D) Chromium

Description : The yield point phenomenon observed in annealed low carbon steel is due to the presence of the following element. (A) Silicon (B) Carbon (C) Phosphorous (D) Chromium

Last Answer : Option B

Work hardenable alloy steel used to make the bucket wheel excavators, blades of bulldozers and other earth moving equipments contain iron, carbon and (A) Manganese (B) Silicon (C) Nickel (D) Chromium

Description : Work hardenable alloy steel used to make the bucket wheel excavators, blades of bulldozers and other earth moving equipments contain iron, carbon and (A) Manganese (B) Silicon (C) Nickel (D) Chromium

Last Answer : (A) Manganese

Addition of __________ to steel does not help in improving its machinability. (A) Sulphur (B) Silicon (C) Lead (D) Phosphorous

Description : Addition of __________ to steel does not help in improving its machinability. (A) Sulphur (B) Silicon (C) Lead (D) Phosphorous

Last Answer : (B) Silicon

Addition of __________ to steel does not help in improving its machinability. (A) Sulphur (B) Silicon (C) Lead (D) Phosphorous

Description : Addition of __________ to steel does not help in improving its machinability. (A) Sulphur (B) Silicon (C) Lead (D) Phosphorous

Last Answer : Option B

Silicon crystal can be converted to p-type semi-conductor by doping with (A) Phosphorous (B) Nitrogen (C) Carbon (D) Boron

Description : Silicon crystal can be converted to p-type semi-conductor by doping with (A) Phosphorous (B) Nitrogen (C) Carbon (D) Boron

Last Answer : Option D

______is extensively used for those portions of magnetic circuit which carry steady flux and need superior mechanical properties ? (a) Grey cast-iron (b) Cast steel (c) High carbon steel (d) Stainless steel

Description : ______is extensively used for those portions of magnetic circuit which carry steady flux and need superior mechanical properties ? (a) Grey cast-iron (b) Cast steel (c) High carbon steel (d) Stainless steel

Last Answer : (b) Cast steel

Iron ore may contain (A) Carbon (B) Silicon (C) Phosphorus and manganese (D) All the above

Description : Iron ore may contain (A) Carbon (B) Silicon (C) Phosphorus and manganese (D) All the above

Last Answer : Answer: Option D

Addition of small amount of __________ to grey cast iron is done to produce nodular grey cast iron. (A) Manganese (B) Phosphorous (C) Magnesium (D) Chromium

Description : Addition of small amount of __________ to grey cast iron is done to produce nodular grey cast iron. (A) Manganese (B) Phosphorous (C) Magnesium (D) Chromium

Last Answer : Option C

__________ property of steel increases by addition of large amount of silicon in it. (A) Mechanical (B) Machining (C) Magnetic (D) Refractory

Description : __________ property of steel increases by addition of large amount of silicon in it. (A) Mechanical (B) Machining (C) Magnetic (D) Refractory

Last Answer : Option C

Which of the following alloy steels has the energy saving properties making it suitable for use in electrical machines? (A) Silicon steel (B) Chromium steel (C) Molybdenum steel (D) None of these

Description : Which of the following alloy steels has the energy saving properties making it suitable for use in electrical machines? (A) Silicon steel (B) Chromium steel (C) Molybdenum steel (D) None of these

Last Answer : (A) Silicon steel

Psychotic symptoms and parkinsonism like symptoms develop due to inhalation poisoning of (A) Manganese (B) Phosphorous (C) Magnesium (D) Zinc

Description : Psychotic symptoms and parkinsonism like symptoms develop due to inhalation poisoning of (A) Manganese (B) Phosphorous (C) Magnesium (D) Zinc

Last Answer : Answer : A

The 'transition temperature' for ductile to brittle behaviour of steel increases with increase in the __________ content in steel. (A) Carbon (B) Manganese (C) Both 'a' nor 'b' (D) Neither 'a' nor 'b'

Description : The 'transition temperature' for ductile to brittle behaviour of steel increases with increase in the __________ content in steel. (A) Carbon (B) Manganese (C) Both 'a' nor 'b' (D) Neither 'a' nor 'b'

Last Answer : (A) Carbon

Bearings subjected to light load are made of (A) White metal (B) Phosphorous bronze (C) Monel (D) Silicon bronze

Description : Bearings subjected to light load are made of (A) White metal (B) Phosphorous bronze (C) Monel (D) Silicon bronze

Last Answer : (B) Phosphorous bronze

Duralumin is an alloy of (A) Aluminium, copper and manganese (B) Aluminium, nickel and silicon (C) Aluminium and nickel (D) None of these

Description : Duralumin is an alloy of (A) Aluminium, copper and manganese (B) Aluminium, nickel and silicon (C) Aluminium and nickel (D) None of these

Last Answer : (A) Aluminium, copper and manganese

Explain the effect of nickel, chromium, silicon, molybdenum addition on the properties of steel.

Description : Explain the effect of nickel, chromium, silicon, molybdenum addition on the properties of steel.

Last Answer : 1) Effect of Nickel as alloying Element: i) Provides toughness, corrosion resistance, and deep hardening. ii) Increases resistance to impact iii ) Improves tensile strength 2. Effect ... temper brittleness. iv) increases strength. V0 Mo-carbides help increase creepresistance at elevated temps

Manganese is added in low carbon steel to A. Make the steel tougher and harder B. Raise the yield point C. Make the steel ductile and of good bending qualities D. All of the above

Description : Manganese is added in low carbon steel to A. Make the steel tougher and harder B. Raise the yield point C. Make the steel ductile and of good bending qualities D. All of the above

Last Answer : C. Make the steel ductile and of good bending qualities

The yield strength and tensile strength of low carbon steel may be improved by the addition of (A) Manganese (B) Chromium (C) Nickel (D) Vanadium

Description : The yield strength and tensile strength of low carbon steel may be improved by the addition of (A) Manganese (B) Chromium (C) Nickel (D) Vanadium

Last Answer : Answer: Option D

Weld decay occurs in which of the following steel types? a) Carbon/Manganese b) Low alloy c) Any stainless steel d) Austenitic stainless steels

Description : Weld decay occurs in which of the following steel types? a) Carbon/Manganese b) Low alloy c) Any stainless steel d) Austenitic stainless steels

Last Answer : d) Austenitic stainless steels

Which material is suitable for shaft material? a. High speed steel b. Stainless steel or high carbon steel c. Grey cast iron d. Steel having approx. 0.4% carbon and 0.8% manganese

Description : Which material is suitable for shaft material? a. High speed steel b. Stainless steel or high carbon steel c. Grey cast iron d. Steel having approx. 0.4% carbon and 0.8% manganese

Last Answer : d. Steel having approx. 0.4% carbon and 0.8% manganese

Which of the following is used in pencils? A.Graphite B.Silicon C.Charcoal D.Phosphorous -Science

Description : Which of the following is used in pencils? A.Graphite B.Silicon C.Charcoal D.Phosphorous -Science

Last Answer : answer is A. Graphite

Which one of the following elements is least likely to be found in commercial fertilizers? (1) Nitrogen (2) Phosphorous (3) Potassium (4) Silicon

Description : Which one of the following elements is least likely to be found in commercial fertilizers? (1) Nitrogen (2) Phosphorous (3) Potassium (4) Silicon

Last Answer : (4) Silicon Explanation: Fertilizers typically provide, in varying proportions: (1) six macronutrients: nitrogen (N), phosphorus (P), potassium (K), calcium (Ca), magnesium (Mg), and sulfur (S); and (ii) eight ... copper (Cu), iron (Fe), manganese (Mn), molybdenum (Mo), zinc (Zn) and nickel {Ni}.

The element used in the manufacture of safety matches is – (1) Phosphorous (2) Magnesium (3) Silicon (4) Sulphur

Description : The element used in the manufacture of safety matches is – (1) Phosphorous (2) Magnesium (3) Silicon (4) Sulphur

Last Answer : (1) Phosphorous Explanation: One end of a match is coated with a material that can be ignited by frictional heat generated by striking the match against a suitable surface. The coated end ... ," contains either phosphorus or phosphorus sesquisulfide as the active ingredient and gelatin as a binder.

Which of the following is used in Pencils? A. Graphite (Answer) B. Silicon C. Charcoal D. Phosphorous

Description : Which of the following is used in Pencils? A. Graphite (Answer) B. Silicon C. Charcoal D. Phosphorous

Last Answer : A. Graphite (Answer)

Which one of the following elements is least likely to be found in commercial fertilisers? (1) Nitrogen (2) Phosphorous (3) Potassium (4) Silicon

Description : Which one of the following elements is least likely to be found in commercial fertilisers? (1) Nitrogen (2) Phosphorous (3) Potassium (4) Silicon

Last Answer : Silicon

The element used in the manufacture of safety matches is (1) Phosphorous (2) Magnesium (3) Silicon (4) Sulphur

Description : The element used in the manufacture of safety matches is (1) Phosphorous (2) Magnesium (3) Silicon (4) Sulphur

Last Answer : Phosphorous

Carbon percentage is the same in cast iron and (A) Wrought iron(B) Pig iron(C) Mild steel(D) High silicon (14%) iron

Description : Carbon percentage is the same in cast iron and (A) Wrought iron (B) Pig iron (C) Mild steel (D) High silicon (14%) iron

Last Answer : (B) Pig iron

Carbon tetrachloride can be stored in a storage vessel made of (A) High silicon iron (14% Si) (B) Tin (C) Stainless steel (D) All (A), (B) and (C)

Description : Carbon tetrachloride can be stored in a storage vessel made of (A) High silicon iron (14% Si) (B) Tin (C) Stainless steel (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following finds the least commercial use? (A) Pure iron (B) High silicon iron (C) Low carbon steel (D) High carbon steel

Description : Which of the following finds the least commercial use? (A) Pure iron (B) High silicon iron (C) Low carbon steel (D) High carbon steel

Last Answer : (A) Pure iron

Ball bearings are normally made of __________ steel. (A) High speed (B) High carbon (C) Chrome (D) Silicon

Description : Ball bearings are normally made of __________ steel. (A) High speed (B) High carbon (C) Chrome (D) Silicon

Last Answer : (C) Chrome

In a good rimming steel (A) Carbon and silicon should be low (B) Silicon should be low but carbon should be high (C) Both silicon & carbon should be high (D) Silicon should be high but carbon should be low

Description : In a good rimming steel (A) Carbon and silicon should be low (B) Silicon should be low but carbon should be high (C) Both silicon & carbon should be high (D) Silicon should be high but carbon should be low

Last Answer : (A) Carbon and silicon should be low

Depending on the chemical composition and mechanical properties, iron may be classified as (A) Cast iron (B) Wrought iron (C) Steel (D) All the above

Description : Depending on the chemical composition and mechanical properties, iron may be classified as (A) Cast iron (B) Wrought iron (C) Steel (D) All the above

Last Answer : Answer: Option D

The following element can't impart high strength at elevated temperature A. Manganese B. Magnesium C. Nickel D. Silicon

Description : The following element can't impart high strength at elevated temperature A. Manganese B. Magnesium C. Nickel D. Silicon

Last Answer : B. Magnesium

Pick out the wrong statement. (A) Cold cracking of a weld is due to the presence of hydrogen gas in the weld (B) True stress is given by, σ = σE (1 + εE), where σE and εE are engineering stress and engineering strain respectively (C) Phosphorous can be easily recovered in the iron blast furnace (D) High residual stress at the surface is beneficial for fatigue properties of a material

Description : Pick out the wrong statement. (A) Cold cracking of a weld is due to the presence of hydrogen gas in the weld (B) True stress is given by, σ = σE (1 + εE), where σE and εE ... in the iron blast furnace (D) High residual stress at the surface is beneficial for fatigue properties of a material

Last Answer : Option C

Silico-manganese steels (containing 0.7% Mn, 0.5% C and 2% Si) (A) Do not require heat treatment for any of its applications (B) Are used for leaf and coiled springs (C) Do not have good resilience properties (D) Is tempered at 850°C

Description : Silico-manganese steels (containing 0.7% Mn, 0.5% C and 2% Si) (A) Do not require heat treatment for any of its applications (B) Are used for leaf and coiled springs (C) Do not have good resilience properties (D) Is tempered at 850°C

Last Answer : (B) Are used for leaf and coiled springs

Transformer cores are laminated with (A) Low carbon steel. (B) Silicon sheet steel. (C) Nickel alloy steel. (D) Chromium sheet steel.

Description : Transformer cores are laminated with (A) Low carbon steel. (B) Silicon sheet steel. (C) Nickel alloy steel. (D) Chromium sheet steel.

Last Answer : (B) Silicon sheet steel.

Steel is composed of a number of elements. The two essential elements are iron and w) aluminum x) carbon y) nickel z) silicon

Description : Steel is composed of a number of elements. The two essential elements are iron and w) aluminum x) carbon y) nickel z) silicon 

Last Answer : ANSWER: X -- CARBON

Corrosion resistance of steel is increased by the addition of (A) Phosphorous and tungsten (B) Nickel and chromium (C) Lead and vanadium (D) Molybdenum and tungsten

Description : Corrosion resistance of steel is increased by the addition of (A) Phosphorous and tungsten (B) Nickel and chromium (C) Lead and vanadium (D) Molybdenum and tungsten

Last Answer : (B) Nickel and chromium

Bush bearings are made of (A) Mild steel (B) Phosphorous bronze (C) White metal alloys (D) None of these

Description : Bush bearings are made of (A) Mild steel (B) Phosphorous bronze (C) White metal alloys (D) None of these

Last Answer : (B) Phosphorous bronze

High amount of sulphur and phosphorous in coke causes (A) Decrease in its calorific value (B) Increase in its strength(C) Brittleness of steel made by using it(D) None of these

Description : High amount of sulphur and phosphorous in coke causes (A) Decrease in its calorific value (B) Increase in its strength (C) Brittleness of steel made by using it (D) None of these

Last Answer : (C) Brittleness of steel made by using it

Presence of phosphorous in metallurgical coal (A) Is not undesirable (B) Reduces its calorific value (C) Badly affects the quality of steel

Description : Presence of phosphorous in metallurgical coal (A) Is not undesirable (B) Reduces its calorific value (C) Badly affects the quality of steel

Last Answer : (C) Badly affects the quality of steel

Brazing filler metal used for joining steel plates (A) Melts below the melting points of base metals (B) Melts below 300°C (C) Is copper phosphorous alloy

Description : Brazing filler metal used for joining steel plates (A) Melts below the melting points of base metals (B) Melts below 300°C (C) Is copper phosphorous alloy

Last Answer : (A) Melts below the melting points of base metals

Given below are some properties. How many of these can hold good for phosphorous (a) Metal (b) Non- metal (c) Metalloid (d) Exhibits allotropy (e) Cat

Description : Given below are some properties. How many of these can hold good for phosphorous (a) Metal (b) Non- metal (c) Metalloid (d) Exhibits allotropy (e) Cat

Last Answer : Given below are some properties. How many of these can hold good for phosphorous (a) ... electricity (h) Least dense among nitrogen family elements

Given below are some properties. How many of these can hold good for phosphorous (a) Metal (b) Non- metal (c) Metalloid (d) Exhibits allotropy (e) Cat

Description : Given below are some properties. How many of these can hold good for phosphorous (a) Metal (b) Non- metal (c) Metalloid (d) Exhibits allotropy (e) Cat

Last Answer : Given below are some properties. How many of these can hold good for phosphorous (a) ... electricity (h) Least dense among nitrogen family elements

Austenitic manganese steel used for making jaws of crushing machines contains about __________ percent manganese. (A) 1.5-2 (B) 3.5-4.5 (C) 7-9 (D) 12-14

Description : Austenitic manganese steel used for making jaws of crushing machines contains about __________ percent manganese. (A) 1.5-2 (B) 3.5-4.5 (C) 7-9 (D) 12-14

Last Answer : (D) 12-14

Presence of manganese in alloy steel improves its (A) Corrosion resistance (B) Cutting ability (C) Abrasion resistance & toughness (D) Elasticity & creep resistance

Description : Presence of manganese in alloy steel improves its (A) Corrosion resistance (B) Cutting ability (C) Abrasion resistance & toughness (D) Elasticity & creep resistance

Last Answer : (C) Abrasion resistance & toughness

Manganese in steel affects its (A) Ductility (B) Tensile strength (C) Hardness (D) None of these

Description : Manganese in steel affects its (A) Ductility (B) Tensile strength (C) Hardness (D) None of these

Last Answer : (B) Tensile strength