A river is said to be of uniform section if in its section A) A segment of a circle can be fitted (B) A parabolic section can be fitted (C) A rectangular section can be fitted (D) All the above

A river is said to be of uniform section if in its section
A) A segment of a circle can be fitted
(B) A parabolic section can be fitted
(C) A rectangular section can be fitted
(D) All the above
by

1 Answer

Answer :

Answer: Option D
by

Related questions

Most commonly used section in grade aqueducts, is (A) Circular (B) Rectangular (C) Parabolic (D) Horse shoe section

Description : Most commonly used section in grade aqueducts, is  (A) Circular  (B) Rectangular  (C) Parabolic  (D) Horse shoe section 

Last Answer : (B) Rectangular 

Distribution of shear intensity over a rectangular section of a beam, follows: (A) A circular curve (B) A straight line (C) A parabolic curve (D) An elliptical curve

Description : Distribution of shear intensity over a rectangular section of a beam, follows: (A) A circular curve (B) A straight line (C) A parabolic curve (D) An elliptical curve

Last Answer : Answer: Option C

For a reinforced concrete section, the shape of shear stress diagram is (A) Wholly parabolic (B) Wholly rectangular (C) Parabolic above neutral axis and rectangular below neutral axis (D) Rectangular above neutral axis and parabolic below neutral axis

Description : For a reinforced concrete section, the shape of shear stress diagram is (A) Wholly parabolic (B) Wholly rectangular (C) Parabolic above neutral axis and rectangular below neutral axis (D) Rectangular above neutral axis and parabolic below neutral axis

Last Answer : Answer: Option C

For a reinforced concrete beam section, the shape of shear stress diagram is (a) Parabolic over the whole section with maximum value at the neutral axis. (b) Parabolic above the neutral axis and rectangular below the neutral axis. (c) Linearly varying as the distance form the N.A. (d) All the above.

Description : For a reinforced concrete beam section, the shape of shear stress diagram is (a) Parabolic over the whole section with maximum value at the neutral axis. (b) Parabolic above the neutral axis and rectangular below the neutral axis. (c) Linearly varying as the distance form the N.A. (d) All the above.

Last Answer : (b) Parabolic above the neutral axis and rectangular below the neutral axis.

If a constant section beam is subjected to a uniform bending moment throughout, its length bends to (A) A circular arc (B) A parabolic arc (C) A catenary (D) None of these

Description : If a constant section beam is subjected to a uniform bending moment throughout, its length bends  to  (A) A circular arc  (B) A parabolic arc  (C) A catenary  (D) None of these 

Last Answer : (A) A circular arc 

The most efficient cross section of sewers in a separate sewerage system is A. Parabolic B. Circular C. Rectangular D. New egged

Description : The most efficient cross section of sewers in a separate sewerage system is A. Parabolic B. Circular C. Rectangular D. New egged

Last Answer : ANS: B

The most efficient cross-section of sewers in a combined sewerage system is A. Parabolic B. Circular C. Rectangular D. New egged

Description : The most efficient cross-section of sewers in a combined sewerage system is A. Parabolic B. Circular C. Rectangular D. New egged

Last Answer : ANS: B

If a rectangular pre-stressed beam of an effective span of 5 meters and carrying a total load 3840 kg/m, is designed by the load balancing method, the central dip of the parabolic tendon should be (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

Description : If a rectangular pre-stressed beam of an effective span of 5 meters and carrying a total load 3840 kg/m, is designed by the load balancing method, the central dip of the parabolic tendon should be (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

Last Answer : Answer: Option B

If the loading on a pre-stressed rectangular beam, is uniformly distributed, the tendon to be provided should be. (A) Straight below centroidal axis (B) Parabolic with convexity downward (C) Parabolic with convexity upward (D) Straight above centroidal axis

Description : If the loading on a pre-stressed rectangular beam, is uniformly distributed, the tendon to be provided should be. (A) Straight below centroidal axis (B) Parabolic with convexity downward (C) Parabolic with convexity upward (D) Straight above centroidal axis

Last Answer : Answer: Option B

A simply supported rectangular beam is uniformly loaded and is prestressed. The tendon provided for prestressing should be (a) Straight, above centroidal axis (b) Straight, below centroidal axis (c) parabolic, with convexity upward (d) Parabolic, with convexity downward

Description : A simply supported rectangular beam is uniformly loaded and is prestressed. The tendon provided for prestressing should be (a) Straight, above centroidal axis (b) Straight, below centroidal axis (c) parabolic, with convexity upward (d) Parabolic, with convexity downward

Last Answer : (d) Parabolic, with convexity downward

The stress-strain curve concrete in compression follows [ A ] a straight line [ B ] a rectangular parabolic curve [ C ] a semi circular arc [ D ] a cubic parabola

Description : The stress-strain curve concrete in compression follows [ A ] a straight line [ B ] a rectangular parabolic curve [ C ] a semi circular arc [ D ] a cubic parabola

Last Answer : [ B ] a rectangular parabolic curve

The stress-strain curve concrete in compression follows [ A ] a straight line [ B ] a rectangular parabolic curve [ C ] a semi circular arc [ D ] a cubic parabola

Description : The stress-strain curve concrete in compression follows [ A ] a straight line [ B ] a rectangular parabolic curve [ C ] a semi circular arc [ D ] a cubic parabola

Last Answer : [ B ] a rectangular parabolic curve

Consider the following statements: Air vessels are fitted on the suction and delivery sides of a reciprocating pump to 1. Achieve higher speed without separation. 2. Reduce work in overcoming frictional resistance. 3. Avoid excessive vibration permanently. 4. Have nearly uniform discharge. Which of these statements are corrects? (a) 1, 2 & 4 only (b) 1, 2 & 3 only (c) 2, 3 & 4 only (d) 1, 2, 3 & 4

Description : Consider the following statements: Air vessels are fitted on the suction and delivery sides of a reciprocating pump to 1. Achieve higher speed without separation. 2. Reduce work in overcoming frictional resistance. 3. Avoid excessive vibration ... 2 & 3 only (c) 2, 3 & 4 only (d) 1, 2, 3 & 4

Last Answer : (d) 1, 2, 3 & 4

A beam of uniform rectangular section 200 mm wide and 300mm deep is simply supported at its ends.It carries a uniformly distributed load of 9KN/m run over the entire span of 5m.If E=1×104 N/mm2, what is the maximum deflection? a.14.26 mm b.17.28 mm c.18.53 mm d.16.27 mm.

Description : A beam of uniform rectangular section 200 mm wide and 300mm deep is simply supported at its ends.It carries a uniformly distributed load of 9KN/m run over the entire span of 5m.If E=1×104 N/mm2, what is the maximum deflection? a.14.26 mm b.17.28 mm c.18.53 mm d.16.27 mm.

Last Answer : d.16.27 mm.

A beam is said to be of uniform strength, if (A) B.M. is same throughout the beam (B) Shear stress is same throughout the beam (C) Deflection is same throughout the beam (D) Bending stress is same at every section along its longitudinal axis

Description : A beam is said to be of uniform strength, if (A) B.M. is same throughout the beam (B) Shear stress is same throughout the beam (C) Deflection is same throughout the beam (D) Bending stress is same at every section along its longitudinal axis

Last Answer : (D) Bending stress is same at every section along its longitudinal axis

A stready current i is flowing through a conductor of uniform cross-section. Any segment of the conductor has

Description : A stready current i is flowing through a conductor of uniform cross-section. Any segment of the conductor has

Last Answer : A stready current i is flowing through a conductor of uniform cross-section. Any segment of the ... charge D. charge proportional to current `i`

If the maximum dip of a parabolic tendon carrying tension P is h and the effective length of the pre-stressed beam is L, the upward uniform pressure will be (A) 8hp/l (B) 8hp/l² (C) 8hl/p (D) 8hl/p²

Description : If the maximum dip of a parabolic tendon carrying tension P is h and the effective length of the pre-stressed beam is L, the upward uniform pressure will be (A) 8hp/l (B) 8hp/l² (C) 8hl/p (D) 8hl/p²

Last Answer : Answer: Option B

The base of a column is subjected to moment. If the intensity of bearing pressure due to axial load is equal to stress due to moment, then the bearing pressure between the base and the concrete is (a) Uniform compression throughout (b) Zero at one end and compression at the other end (c) Tension at one end and compression at the other end (d) Compression, verying as a parabolic profile

Description : The base of a column is subjected to moment. If the intensity of bearing pressure due to axial load is equal to stress due to moment, then the bearing pressure between the base and the concrete ... Tension at one end and compression at the other end (d) Compression, verying as a parabolic profile

Last Answer : (b) Zero at one end and compression at the other end

Discharge curve may be extended by logarithmic method if (A) Cross section of river is uniform (B) River is broader and shallower (C) River is of any type (D) None of these

Description : Discharge curve may be extended by logarithmic method if (A) Cross section of river is uniform (B) River is broader and shallower (C) River is of any type (D) None of these

Last Answer : Answer: Option A

If a three hinged parabolic arch carries a uniformly distributed load on its entire span, every section of the arch resists. (A) Compressive force (B) Tensile force (C) Shear force (D) Bending moment

Description : If a three hinged parabolic arch carries a uniformly distributed load on its entire span, every section of the arch resists. (A) Compressive force (B) Tensile force (C) Shear force (D) Bending moment

Last Answer : (A) Compressive force

A simply supported uniform rectangular bar breadth b, depth d and length L carries an isolated load W at its mid-span. The same bar experiences an extension e under same tensile load. The ratio of the maximum deflection to the elongation, is (A) L/d (B) L/2d (C) (L/2d)² (D) (L/3d)²

Description : A simply supported uniform rectangular bar breadth b, depth d and length L carries an isolated  load W at its mid-span. The same bar experiences an extension e under same tensile load. The  ratio of the maximum deflection to the ... (A) L/d (B) L/2d (C) (L/2d)² (D) (L/3d)²

Last Answer : (C) (L/2d)

The longitudinal section of the surface of bubble tube is (A) Straight (B) Circular (C) Parabolic (D) Elliptic

Description : The longitudinal section of the surface of bubble tube is  (A) Straight  (B) Circular  (C) Parabolic  (D) Elliptic 

Last Answer : (B) Circular

The distribution of the forces along the length of key fitted in a shaft (A) Varies linearly (B) Is uniform throughout (C) Varies exponentially, being more near the torque-input end (D) Varies exponentially, being less near the torque-input end

Description : The distribution of the forces along the length of key fitted in a shaft (A) Varies linearly (B) Is uniform throughout (C) Varies exponentially, being more near the torque-input end (D) Varies exponentially, being less near the torque-input end

Last Answer : (C) Varies exponentially, being more near the torque-input end

Air vessel fitted to a reciprocating pump (A) Increases the work done (B) Decreases the work done (C) Causes cavitation (D) Results in non-uniform discharge

Description : Air vessel fitted to a reciprocating pump (A) Increases the work done (B) Decreases the work done (C) Causes cavitation (D) Results in non-uniform discharge

Last Answer : (B) Decreases the work done

In case of a double line river, contours are (A) Stopped at the banks of the river (B) Stopped at the edge of the river (C) Drawn across the water (D) Drawn by parabolic curves having their vertex at the centre of the water

Description : In case of a double line river, contours are (A) Stopped at the banks of the river (B) Stopped at the edge of the river (C) Drawn across the water (D) Drawn by parabolic curves having their vertex at the centre of the water

Last Answer : (B) Stopped at the edge of the river

If the thermal conductivity of a wall material is independent of temperature, the steady state temperature distribution in the very large thin plane wall having steady, uniform surface temperature follows __________ law. (A) Hyperbolic (B) Parabolic (C) Linear (D) Logarithmic

Description : If the thermal conductivity of a wall material is independent of temperature, the steady state temperature distribution in the very large thin plane wall having steady, uniform surface temperature follows __________ ... (A) Hyperbolic (B) Parabolic (C) Linear (D) Logarithmic

Last Answer : (C) Linear

If the thermal conductivity of a wall material is independent of temperature, the steady state temperature distribution in the very large thin plane wall having steady, uniform surface temperature follows __________ law. (A) Parabolic (B) Hyperbolic (C) Linear (D) Logarithmic

Description : If the thermal conductivity of a wall material is independent of temperature, the steady state temperature distribution in the very large thin plane wall having steady, uniform surface temperature follows __________ law. (A) Parabolic (B) Hyperbolic (C) Linear (D) Logarithmic

Last Answer : (A) Parabolic

The variation of shear stress in a circular shaft subjected to torsion is a. Linear b. Parabolic c. Hyperbolic. d. Uniform

Description : The variation of shear stress in a circular shaft subjected to torsion is a. Linear b. Parabolic c. Hyperbolic. d. Uniform

Last Answer : a. Linear

The moment of inertia of a rectangular section of width and depth about an axis passing through C.G. and parallel to its width is (A) BD²/6 (B) BD3 /6 (C) BD3 /12 (D) B²D/6

Description : The moment of inertia of a rectangular section of width and depth about an axis passing  through C.G. and parallel to its width is  (A) BD²/6  (B) BD3 /6  (C) BD3 /12  (D) B²D/6 

Last Answer : (C) BD3 /12 

The section modulus of a rectangular light beam 25 metres long is 12.500 cm3 . The beam is simply supported at its ends and carries a longitudinal axial tensile load of 10 tonnes in addition to a point load of 4 tonnes at the centre. The maximum stress in the bottom most fibre at the mid span section, is (A) 13.33 kg/cm2 tensile (B) 13.33 kg/cm2 compressive (C) 26.67 kg/cm2 tensile (D) 26.67 kg/cm2 compressive

Description : The section modulus of a rectangular light beam 25 metres long is 12.500 cm3 . The beam is simply supported at its ends and carries a longitudinal axial tensile load of 10 tonnes in addition to a point load of ... 13.33 kg/cm2 compressive (C) 26.67 kg/cm2 tensile (D) 26.67 kg/cm2 compressive

Last Answer : (C) 26.67 kg/cm2 tensile

A cantilever beam rectangular in cross-section is subjected to an isolated load at its free end. If the width of the beam is doubled, the deflection of the free end will be changed in the ratio of (A) 8 (B) 1/8 (C) 1/2 (D) 3

Description : A cantilever beam rectangular in cross-section is subjected to an isolated load at its free end. If the  width of the beam is doubled, the deflection of the free end will be changed in the ratio of  (A) 8  (B) 1/8  (C) 1/2  (D) 3

Last Answer : (C) 1/2 

The discharge through a channel of rectangular section will be maximum, if (A) Its depth is twice the breadth (B) Its breadth is twice the depth (C) Its depth is thrice the breadth (D) Its breadth is thrice the depth

Description : The discharge through a channel of rectangular section will be maximum, if (A) Its depth is twice the breadth (B) Its breadth is twice the depth (C) Its depth is thrice the breadth (D) Its breadth is thrice the depth

Last Answer : Answer: Option B

When the ratio of the effective length of the rectangular columns to its lateral dimension exceeds12, then the column is said to be [ A ] Short column [ B ] Slender column [ C ] Biaxial column [ D ] All the above

Description : When the ratio of the effective length of the rectangular columns to its lateral dimension exceeds12, then the column is said to be [ A ] Short column [ B ] Slender column [ C ] Biaxial column [ D ] All the above

Last Answer : [ B ] Slender column

Select the correct practical example of steady non-uniform flow. (A) Motion of water around a ship in a lake (B) Motion of river around bridge piers (C) Steadily decreasing flow through a reducing section (D) Steadily increasing flow through a pipe

Description : Select the correct practical example of steady non-uniform flow. (A) Motion of water around a ship in a lake (B) Motion of river around bridge piers (C) Steadily decreasing flow through a reducing section (D) Steadily increasing flow through a pipe

Last Answer : (C) Steadily decreasing flow through a reducing section

Aqueducts are generally designed (A) Circular (B) Rectangular (C) Horse shoe section (D) All the above

Description : Aqueducts are generally designed (A) Circular (B) Rectangular (C) Horse shoe section (D) All the above

Last Answer : (D) All the above

The maximum magnitude of shear stress due to shear force F on a rectangular section of area A at the neutral axis, is (A) F/A (B) F/2A (C) 3F/2A (D) 2F/3A

Description : The maximum magnitude of shear stress due to shear force F on a rectangular section of area A at  the neutral axis, is  (A) F/A (B) F/2A (C) 3F/2A (D) 2F/3A

Last Answer : (C) 3F/2A

In plastic analysis, the shape factor for rectangular section, is (A) 1.4 (B) 1.5 (C) 1.6 (D) 1.7

Description : In plastic analysis, the shape factor for rectangular section, is  (A) 1.4  (B) 1.5  (C) 1.6  (D) 1.7

Last Answer : (B) 1.5 

The ratio of maximum and average shear stresses on a rectangular section, is (A) 1 (B) 1.25 (C) 1.5 (D) 2.5

Description : The ratio of maximum and average shear stresses on a rectangular section, is  (A) 1  (B) 1.25  (C) 1.5  (D) 2.5 

Last Answer : (C) 1.5

When a rectangular beam is loaded transversely, the maximum compressive stress develops on (A) Bottom fibre (B) Top fibre (C) Neutral axis (D) Every cross-section

Description : When a rectangular beam is loaded transversely, the maximum compressive stress develops on (A) Bottom fibre (B) Top fibre (C) Neutral axis (D) Every cross-section

Last Answer : (B) Top fibre

The section modulus of a rectangular section is proportional to (A) Area of the section (B) Square of the area of the section (C) Product of the area and depth (D) Product of the area and width

Description : The section modulus of a rectangular section is proportional to  (A) Area of the section  (B) Square of the area of the section  (C) Product of the area and depth  (D) Product of the area and width

Last Answer : (A) Area of the section

For the same height, the bottom width for no tension, (A) For triangular section is more than rectangular section (B) For rectangular section is more than triangular section (C) For triangular section is same as that of a rectangular section (D) None of these

Description : For the same height, the bottom width for no tension,  (A) For triangular section is more than rectangular section  (B) For rectangular section is more than triangular section  (C) For triangular section is same as that of a rectangular section  (D) None of these 

Last Answer : (C) For triangular section is same as that of a rectangular section 

The radius of gyration of a rectangular section is not proportional to (A) Square root of the moment of inertia (B) Square root of the inverse of the area (C) Square root of the moment of inertia divided by area of the section (D) None of these

Description : The radius of gyration of a rectangular section is not proportional to  (A) Square root of the moment of inertia  (B) Square root of the inverse of the area  (C) Square root of the moment of inertia divided by area of the section  (D) None of these 

Last Answer : (D) None of these 

In rectangular columns (cross-section b × h), the core is a (A) Rectangle of lengths b/2 and h/2 (B) Square of length b/2 (C) Rhombus of length h/2 (D) Rhombus of diagonals b/3 and h/3

Description : In rectangular columns (cross-section b × h), the core is a  (A) Rectangle of lengths b/2 and h/2  (B) Square of length b/2  (C) Rhombus of length h/2  (D) Rhombus of diagonals b/3 and h/3 

Last Answer : (D) Rhombus of diagonals b/3 and h/3 

A rectangular bar of width b and height h is being used as a cantilever. The loading is in a plane parallel to the side b. The section modulus is (A) bh3 /12 (B) bh²/6 (C) b²h/6 (D) None of these

Description : A rectangular bar of width b and height h is being used as a cantilever. The loading is in a plane parallel to the side b. The section modulus is (A) bh3 /12 (B) bh²/6 (C) b²h/6 (D) None of these

Last Answer : (C) b²h/6

is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is (A) f = (P/A) + (Z/M) (B) f = (A/P) + (M/Z) (C) f = (P/A) + (M/Z) (D) f = (P/A) + (M/6Z)

Description : is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is (A) f = (P/A) + (Z/M) ... ) + (M/Z) (C) f = (P/A) + (M/Z) (D) f = (P/A) + (M/6Z)

Last Answer : Answer: Option C

is the pre-stressed force applied to tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The minimum stress on the beam subjected to a maximum bending moment is (A) f = (P/A) - (Z/M) (B) f = (A/P) - (M/Z) (C) f = (P/A) - (M/Z) (D) f = (P/A) - (M/6Z)

Description : is the pre-stressed force applied to tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The minimum stress on the beam subjected to a maximum bending moment is (A) f = (P/A) - (Z/M) (B) f = (A/P) - (M/Z) (C) f = (P/A) - (M/Z) (D) f = (P/A) - (M/6Z)

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) The throat of the section of a control meter is either rectangular or trapezoidal (B) The floor of the control meter throat is almost level (C) The floor of the expanding outlet of the control meter is given a steep slope (D) All the above

Description : Pick up the correct statement from the following: (A) The throat of the section of a control meter is either rectangular or trapezoidal (B) The floor of the control meter throat is almost level (C) The floor of the expanding outlet of the control meter is given a steep slope (D) All the above

Last Answer : Answer: Option D

The most efficient section of a channel is (A) Triangular (B) Rectangular (C) Square (D) Trapezoidal

Description : The most efficient section of a channel is (A) Triangular (B) Rectangular (C) Square (D) Trapezoidal

Last Answer : Answer: Option D

The highest efficiency is obtained with a channel of __________ section. (A) Circular (B) Square (C) Rectangular (D) Trapezoidal

Description : The highest efficiency is obtained with a channel of __________ section. (A) Circular (B) Square (C) Rectangular (D) Trapezoidal

Last Answer : Answer: Option D

The most economical section of a rectangular channel is one which has hydraulic mean depth or hydraulic radius equal to (A) Half the depth (B) Half the breadth (C) Twice the depth (D) Twice the breadth

Description : The most economical section of a rectangular channel is one which has hydraulic mean depth or hydraulic radius equal to (A) Half the depth (B) Half the breadth (C) Twice the depth (D) Twice the breadth

Last Answer : Answer: Option A