If the thermal conductivity of a wall material is independent of temperature, the steady state temperature distribution in the very large thin plane wall having steady, uniform surface temperature follows __________ law. (A) Hyperbolic (B) Parabolic (C) Linear (D) Logarithmic

If the thermal conductivity of a wall material is independent of

temperature, the steady state temperature distribution in the very large thin

plane wall having steady, uniform surface temperature follows __________

law.

(A) Hyperbolic

(B) Parabolic

(C) Linear

(D) Logarithmic


by

1 Answer

Answer :

(C) Linear

by

Related questions

If the thermal conductivity of a wall material is independent of temperature, the steady state temperature distribution in the very large thin plane wall having steady, uniform surface temperature follows __________ law. (A) Parabolic (B) Hyperbolic (C) Linear (D) Logarithmic

Description : If the thermal conductivity of a wall material is independent of temperature, the steady state temperature distribution in the very large thin plane wall having steady, uniform surface temperature follows __________ law. (A) Parabolic (B) Hyperbolic (C) Linear (D) Logarithmic

Last Answer : (A) Parabolic

For turbulent flow in smooth circular pipe, the velocity distribution is a function of the distance 'd' measured from the wall of the pipe and the friction velocity 'v', and it follows a __________ relationship. (A) Logarithmic (B) Linear (C) Hyperbolic (D) Parabolic

Description : For turbulent flow in smooth circular pipe, the velocity distribution is a function of the distance 'd' measured from the wall of the pipe and the friction velocity 'v', and it follows a __________ relationship. (A) Logarithmic (B) Linear (C) Hyperbolic (D) Parabolic

Last Answer : (A) Logarithmic

For laminar flow of Newtonian fluid in a circular pipe, the velocitydistribution is a function of the distance 'd' measured from the centre line ofthe pipe, and it follows a __________ relationship.(A) Logarithmic(B) Parabolic(C) Hyperbolic(D) Linear

Description : For laminar flow of Newtonian fluid in a circular pipe, the velocitydistribution is a function of the distance 'd' measured from the centre line of the pipe, and it follows a __________ relationship. (A) Logarithmic (B) Parabolic (C) Hyperbolic (D) Linear

Last Answer : (B) Parabolic

The partial pressure distribution of an ideal gas diffusing through another stagnant ideal gas at steady state follows a/an __________ law. (A) Exponential (B) Parabolic (C) Linear (D) Cubic

Description : The partial pressure distribution of an ideal gas diffusing through another stagnant ideal gas at steady state follows a/an __________ law. (A) Exponential (B) Parabolic (C) Linear (D) Cubic

Last Answer : (A) Exponential

Temperature profile in steady state heat transfer is (A) Asymptotic (B) Hyperbolic (C) Parabolic (D) Linear

Description : Temperature profile in steady state heat transfer is (A) Asymptotic (B) Hyperbolic (C) Parabolic (D) Linear

Last Answer : (D) Linear

The velocity profile for turbulent flow through a closed conduit is (A) Logarithmic (B) Parabolic (C) Hyperbolic (D) Linear

Description : The velocity profile for turbulent flow through a closed conduit is (A) Logarithmic (B) Parabolic (C) Hyperbolic (D) Linear

Last Answer : (A) Logarithmic

The velocity distribution in direction normal to the direction of flow in plane Poiseuille flow is (A) Hyperbolic (B) Parabolic (C) Linear (D) None of these

Description : The velocity distribution in direction normal to the direction of flow in plane Poiseuille flow is (A) Hyperbolic (B) Parabolic (C) Linear (D) None of these

Last Answer : (B) Parabolic

Which law is followed by the velocity distribution in the turbulent boundary layer? (A) Parabolic law (B) Linear law (C) Logarithmic law (D) None of these

Description : Which law is followed by the velocity distribution in the turbulent boundary layer? (A) Parabolic law (B) Linear law (C) Logarithmic law (D) None of these

Last Answer : (C) Logarithmic law

In case of heat flow by conduction for a cylindrical body with an internal heat source, the nature of temperature distribution is (A) Linear (B) Hyperbolic (C) Parabolic (D) None of these

Description : In case of heat flow by conduction for a cylindrical body with an internal heat source, the nature of temperature distribution is (A) Linear (B) Hyperbolic (C) Parabolic (D) None of these

Last Answer : (C) Parabolic

Pick out the correct statement. (A) 1 kcal/hr.m.°C is equal to 1 BTU/hr. ft.°F (B) In steady state heat conduction, the only property of the substance which determines the temperature distribution, is the thermal conductivity (C) In unsteady state heat conduction, heat flows in the direction of temperature rise (D) In heat transfer by forced convection, Grashoff number is very important

Description : Pick out the correct statement. (A) 1 kcal/hr.m.°C is equal to 1 BTU/hr. ft.°F (B) In steady state heat conduction, the only property of the substance which determines the ... in the direction of temperature rise (D) In heat transfer by forced convection, Grashoff number is very important

Last Answer : (B) In steady state heat conduction, the only property of the substance which determines the temperature distribution, is the thermal conductivity

The variation of shear stress in a circular shaft subjected to torsion is a. Linear b. Parabolic c. Hyperbolic. d. Uniform

Description : The variation of shear stress in a circular shaft subjected to torsion is a. Linear b. Parabolic c. Hyperbolic. d. Uniform

Last Answer : a. Linear

Finned tube heat exchangers (A) Give larger area per tube (B) Use metal fins of low thermal conductivity (C) Facilitate very large temperature drop through tube wall (D) Are used for smaller heat load

Description : Finned tube heat exchangers (A) Give larger area per tube (B) Use metal fins of low thermal conductivity (C) Facilitate very large temperature drop through tube wall (D) Are used for smaller heat load

Last Answer : (A) Give larger area per tube

A wall has two layers of materials A and B; each made of a different material. Both the layers have the same thickness. The thermal conductivity of material A is twice that of B. Under the equilibrium, the temperature difference across the wall is 36°C. The temperature difference across the layer A is __________ °C. (A) 6 (B) 12 (C) 18 (D) 24

Description : A wall has two layers of materials A and B; each made of a different material. Both the layers have the same thickness. The thermal conductivity of material A is twice that of B. Under the equilibrium, the temperature ... difference across the layer A is __________ °C. (A) 6 (B) 12 (C) 18 (D) 24

Last Answer : (B) 12

The stress-strain relation of the Newtonian fluid is (A) Linear (B) Parabolic (C) Hyperbolic (D) Inverse type

Description : The stress-strain relation of the Newtonian fluid is (A) Linear (B) Parabolic (C) Hyperbolic (D) Inverse type

Last Answer : Answer: Option A

Shear strain is a (a) Linear strain (b) Parabolic strain (c) Logarithmic strain (d) None

Description : Shear strain is a (a) Linear strain (b) Parabolic strain (c) Logarithmic strain (d) None

Last Answer : (d) None

The most economical channel section for the fluid flow is the one for which the discharge is maximum for a given cross-sectional area. Vertical velocity distribution in an open channel for laminar flow can be assumed to be (A) Parabolic (B) Hyperbolic (C) Straight line (D) None of these

Description : The most economical channel section for the fluid flow is the one for which the discharge is maximum for a given cross-sectional area. Vertical velocity distribution in an open channel for laminar flow can be assumed to be (A) Parabolic (B) Hyperbolic (C) Straight line (D) None of these

Last Answer : (A) Parabolic

The left face of a one dimensional slab of thickness 0.2 m is maintained at 80°C and the right face is exposed to air at 30°C. The thermal conductivity of the slab is 1.2 W/m.K and the heat transfer co-efficient from the right face is 10 W/m2 .K. At steady state, the temperature of the right face in °C is (A) 77.2 (B) 71.2 (C) 63.8 (D) 48.7

Description : The left face of a one dimensional slab of thickness 0.2 m is maintained at 80°C and the right face is exposed to air at 30°C. The thermal conductivity of the slab is 1.2 W/m.K and the heat transfer co-efficient from the ... temperature of the right face in °C is (A) 77.2 (B) 71.2 (C) 63.8 (D) 48.7

Last Answer : (D) 48.7

A composite flat wall of a furnace is made of two materials 'A' and 'B'. The thermal conductivity of 'A' is twice of that of material 'B', while the thickness of layer of 'A' is half that of B. If the temperature at the two sides of the wall are 400 and 1200°K, then the temperature drop (in °K) across the layer of material 'A' is (A) 125 (B) 133 (C) 150 (D) 160

Description : A composite flat wall of a furnace is made of two materials 'A' and 'B'. The thermal conductivity of 'A' is twice of that of material 'B', while the thickness of layer of 'A' is half that of B. If the temperature ... drop (in °K) across the layer of material 'A' is (A) 125 (B) 133 (C) 150 (D) 160

Last Answer : (D) 160

Walls of a cubical oven are of thickness l, and they are made of material of thermal conductivity k. The temperature inside the oven is 100°C and the inside heat transfer co-efficient is ‘3k/l’. If the wall temperature on the outside is held at 25°C, what is the inside wall temperature in degree centigrade?(A) 35.5 (B) 43.75 (C) 81.25 (D) 48.25

Description : Walls of a cubical oven are of thickness l, and they are made of material of thermal conductivity k. The temperature inside the oven is 100°C and the inside heat transfer co-efficient is 3k/l'. If the wall temperature ... wall temperature in degree centigrade? (A) 35.5 (B) 43.75 (C) 81.25 (D) 48.25

Last Answer : (C) 81.25

A radioactive isotope undergoes decay with respect to time following __________ law. (A) Logarithmic (B) Exponential (C) Linear (D) Inverse square

Description : A radioactive isotope undergoes decay with respect to time following __________ law. (A) Logarithmic (B) Exponential (C) Linear (D) Inverse square

Last Answer : (B) Exponential

A furnace is made of a refractory brick wall of thickness 0.5 metre and thermal conductivity 0.7 W/m.°K For the same temperature drop and heat loss, this refractory wall can be replaced by a layer of diatomaceous earth of thermal conductivity 0.14 W/m.K and thickness __________ metre. (A) 0.01 (B) 0.1 (C) 0.25 (D) 0.5

Description : A furnace is made of a refractory brick wall of thickness 0.5 metre and thermal conductivity 0.7 W/m.°K For the same temperature drop and heat loss, this refractory wall can be replaced by a layer of diatomaceous earth of ... and thickness __________ metre. (A) 0.01 (B) 0.1 (C) 0.25 (D) 0.5

Last Answer : (B) 0.1

If a fluid expands suddenly into vacuum through an orifice of large dimension, then such a process is called  (a) free expansion  (b) hyperbolic expansion  (c) adiabatic expansion  (d) parabolic expansion  (e) throttling.

Description : If a fluid expands suddenly into vacuum through an orifice of large dimension, then such a process is called  (a) free expansion  (b) hyperbolic expansion  (c) adiabatic expansion  (d) parabolic expansion  (e) throttling.

Last Answer : Answer : a

If a gas vapour is allowed to expand through a very minute aperture, then such a process is known as  (a) free expansion  (b) hyperbolic expansion  (c) adiabatic expansion  (d) parabolic expansion  (e) throttling.

Description : If a gas vapour is allowed to expand through a very minute aperture, then such a process is known as  (a) free expansion  (b) hyperbolic expansion  (c) adiabatic expansion  (d) parabolic expansion  (e) throttling.

Last Answer : Answer : e

In a R.C section under flexure, the assumption that “a plane section before bending remains plane after bending” leads to (a) Strain distribution being linear across the depth (b) Stress distribution being linear across the depth (c) Both stress and strain distribution being linear across the depth (d) Shear stress distribution being uniform along the depth

Description : In a R.C section under flexure, the assumption that a plane section before bending remains plane after bending leads to (a) Strain distribution being linear across the depth (b) ... strain distribution being linear across the depth (d) Shear stress distribution being uniform along the depth

Last Answer : (a) Strain distribution being linear across the depth

Boiling point of a solution according to Duhring's rule is a linear function of the __________ of water. (A) Boiling point (at the same pressure) (B) Viscosity (C) Density (D) Thermal conductivity

Description : Boiling point of a solution according to Duhring's rule is a linear function of the __________ of water. (A) Boiling point (at the same pressure) (B) Viscosity (C) Density (D) Thermal conductivity

Last Answer : (A) Boiling point (at the same pressure)

reduction in thermal resistance during heat transfer does not occur in the (A) Convection heat transfer by stirring the fluid and cleaning the heating surface (B) Conduction heat transfer by reduction in the material thickness and increase in the thermal conductivity (C) Radiation heat transfer by increasing the temperature and reducing the emissivity (D) None of these

Description : reduction in thermal resistance during heat transfer does not occur in the (A) Convection heat transfer by stirring the fluid and cleaning the heating surface (B) Conduction heat transfer by ... Radiation heat transfer by increasing the temperature and reducing the emissivity (D) None of these

Last Answer : Option C

Humid volume, at a given temperature is a/an __________ function of humidity. (A) Inverse (B) Exponential (C) Linear (D) Logarithmic

Description : Humid volume, at a given temperature is a/an __________ function of humidity. (A) Inverse (B) Exponential (C) Linear (D) Logarithmic

Last Answer : (C) Linear

Distribution of shear intensity over a rectangular section of a beam, follows: (A) A circular curve (B) A straight line (C) A parabolic curve (D) An elliptical curve

Description : Distribution of shear intensity over a rectangular section of a beam, follows: (A) A circular curve (B) A straight line (C) A parabolic curve (D) An elliptical curve

Last Answer : Answer: Option C

Heat transfer rate described by Fourier's law will decrease, if the __________ increases. (A) Thermal conductivity (B) Thickness (C) Temperature difference (D) Heat transfer area

Description : Heat transfer rate described by Fourier's law will decrease, if the __________ increases. (A) Thermal conductivity (B) Thickness (C) Temperature difference (D) Heat transfer area

Last Answer : (B) Thickness

Pick out the wrong statement. (A) A fluid mass is free from shearing forces, when it is made to rotate with a uniform velocity(B) Newton's law of viscosity is not applicable to the turbulent flow of fluidwith linear velocity distribution(C) Laminar flow of viscous liquids is involved in the lubrication of varioustypes of bearings(D) Rise of water in capillary tubes reduces with the increasing diameter ofcapillary tubes

Description : Pick out the wrong statement. (A) A fluid mass is free from shearing forces, when it is made to rotate with a uniform velocit (B) Newton's law of viscosity is not applicable to the ... types of bearings (D) Rise of water in capillary tubes reduces with the increasing diameter of capillary tubes

Last Answer : (B) Newton's law of viscosity is not applicable to the turbulent flow of fluid with linear velocity distribution

The distribution of shear stress in a stream of fluid in a circular tube is(A) Linear with radius for turbulent flow only(B) Linear with radius for laminar flow only(C) Linear with radius for both laminar & turbulent flow(D) Parabolic with radius for both laminar & turbulent flow

Description : The distribution of shear stress in a stream of fluid in a circular tube is (A) Linear with radius for turbulent flow only (B) Linear with radius for laminar flow only (C) Linear with radius for both laminar & turbulent flow (D) Parabolic with radius for both laminar & turbulent flow

Last Answer : (C) Linear with radius for both laminar & turbulent flow

For minimum work input in a two stage compression process the intermediated pressure is the A. Arithmetic process of suction and discharge pressure B. Logarithmic mean of suction and discharge pressure C. Geometric mean of suction and discharge pressure D. Hyperbolic mean of suction and discharge

Description : For minimum work input in a two stage compression process the intermediated pressure is the A. Arithmetic process of suction and discharge pressure B. Logarithmic mean of suction and discharge pressure C. Geometric mean of suction and discharge pressure D. Hyperbolic mean of suction and discharge

Last Answer : ANSWER : C

Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is important in problems involving gas absorption without chemical reaction (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion (D) Total reflux in case of distillation operation requires infinite number of plates for a binary system separation

Description : Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is ... reflux in case of distillation operation requires infinite number of plates for a binary system separation

Last Answer : (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion

The heat flux (from outside to inside) across an insulating wall with thermal conductivity, K = 0.04 W/m.°K and thickness 0.16m is 10 W/m2 . The temperature of the inside wall is - 5°C. The outside wall temperature is (A) 25°C (B) 30°C (C) 35°C (D) 40°C

Description : The heat flux (from outside to inside) across an insulating wall with thermal conductivity, K = 0.04 W/m.°K and thickness 0.16m is 10 W/m2 . The temperature of the inside wall is - 5°C. The outside wall temperature is (A) 25°C (B) 30°C (C) 35°C (D) 40°C

Last Answer : (C) 35°C

One face of a furnace wall is at 1030°C and the other face is exposed to room temperature (30°C). If the thermal conductivity of furnace wall is 3 W. m-1. k-1 and the wall thickness is 0.3 m, the maximum heat loss (in W/m) is (A) 100 (B) 900 (C) 9000 (D) 10000

Description : One face of a furnace wall is at 1030°C and the other face is exposed to room temperature (30°C). If the thermal conductivity of furnace wall is 3 W. m-1. k-1 and the wall thickness is 0.3 m, the maximum heat loss (in W/m) is (A) 100 (B) 900 (C) 9000 (D) 10000

Last Answer : (D) 10000

The critical radius of insulation for a spherical shell is (where, K = thermal conductivity of insulating material h0 = heat transfer coefficient at the outer surface) (A) K/h0 (B) 2K/h0 (C) h0 /K (D) h0 /2K

Description : The critical radius of insulation for a spherical shell is (where, K = thermal conductivity of insulating material h0 = heat transfer coefficient at the outer surface) (A) K/h0 (B) 2K/h0 (C) h0 /K (D) h0 /2K

Last Answer : (B) 2K/h0

Thermal conductivity of a material does not depend upon its (A) Mass (B) Volume (C) Surface area (D) All 'a', 'b' & 'c'

Description : Thermal conductivity of a material does not depend upon its (A) Mass (B) Volume (C) Surface area (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Pick out the wrong statement. (A) The mole fraction of solute is directly proportional to the molality of a 'dilute' solution (B) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is nonlinear in the case of steady state unimolal unidirectional diffusion (C) Azeotropes obey Raoult's law at all temperature (D) The relative volatility of a binary mixture at the Azeotropic composition is 1

Description : Pick out the wrong statement. (A) The mole fraction of solute is directly proportional to the molality of a 'dilute' solution (B) For a non-reacting binary mixture of ideal gases, the partial ... at all temperature (D) The relative volatility of a binary mixture at the Azeotropic composition is 1

Last Answer : (C) Azeotropes obey Raoult's law at all temperature

In a cantilever carrying a uniformly varying load starting from zero at the free end, the Bending moment diagram is (a) A horizontal line parallel to x-axis (b) A line inclined to x-axis (c) Follows a parabolic law (d) Follows a cubic law

Description : In a cantilever carrying a uniformly varying load starting from zero at the free end, the Bending moment diagram is (a) A horizontal line parallel to x-axis (b) A line inclined to x-axis (c) Follows a parabolic law (d) Follows a cubic law

Last Answer : (d) Follows a cubic law

In a cantilever carrying a uniformly varying load starting from zero at the free end, the shear force diagram is (a) A horizontal line parallel to x-axis (b) A line inclined to x-axis (c) Follows a parabolic law (d) Follows a cubic law

Description : In a cantilever carrying a uniformly varying load starting from zero at the free end, the shear force diagram is (a) A horizontal line parallel to x-axis (b) A line inclined to x-axis (c) Follows a parabolic law (d) Follows a cubic law

Last Answer : (c) Follows a parabolic law

The curve of a catenary by nature is a.hyperbolic b.ellipse c.107 dynes d.circular e.parabolic

Description : The curve of a catenary by nature is a.hyperbolic b.ellipse c.107 dynes d.circular e.parabolic

Last Answer : e. parabolic

Graph of potential energy against distance is A. curve B. parabolic C. hyperbolic D. straight line

Description : Graph of potential energy against distance is A. curve B. parabolic C. hyperbolic D. straight line

Last Answer : straight line

An ideal vertical curve to join two gradients, is (A) Circular (B) Parabolic (C) Elliptical (D) Hyperbolic

Description : An ideal vertical curve to join two gradients, is (A) Circular (B) Parabolic (C) Elliptical (D) Hyperbolic

Last Answer : (B) Parabolic

The shear stress-strain graph for a Newtonian fluid is a (A) Straight line (B) Parabolic curve (C) Hyperbolic curve (D) Elliptical

Description : The shear stress-strain graph for a Newtonian fluid is a (A) Straight line (B) Parabolic curve (C) Hyperbolic curve (D) Elliptical

Last Answer : Answer: Option A

Increase-strain curve of concrete is (a) A perfect straight line upto failure (b) Straight line up to 0.002% strain value and then parabolic upto failure (c) Nearly parabolic up to 0.002% strain value and the a straight line upto failure (d) Hyperbolic up to 0.002% strain value and then a straight line upto failure

Description : Increase-strain curve of concrete is (a) A perfect straight line upto failure (b) Straight line up to 0.002% strain value and then parabolic upto failure (c) Nearly parabolic up to 0.002% strain ... line upto failure (d) Hyperbolic up to 0.002% strain value and then a straight line upto failure

Last Answer : (c) Nearly parabolic up to 0.002% strain value and the a straight line upto failure

Power consumption during turbulent flow in agitation tank is proportional to the __________ of the liquid. (A) Viscosity (B) Thermal conductivity(C) Surface tension(D) Density

Description : Power consumption during turbulent flow in agitation tank is proportional to the __________ of the liquid. (A) Viscosity (B) Thermal conductivity (C) Surface tension (D) Density

Last Answer : (D) Density

Highly porous refractory bricks are (A) Less susceptible to chemical attack by molten fluxes and gases etc (B) Very strong (C) Having very high thermal conductivity (D) None of these

Description : Highly porous refractory bricks are (A) Less susceptible to chemical attack by molten fluxes and gases etc (B) Very strong (C) Having very high thermal conductivity (D) None of these

Last Answer : (D) None of these

Velocity of liquid hydrocarbon fuels in a pipeline cannot be measured by magnetic flow-meters, because their __________ is very low/small. (A) Thermal conductivity (B) Electrical conductivity (C) Specific gravity

Description : Velocity of liquid hydrocarbon fuels in a pipeline cannot be measured by magnetic flow-meters, because their __________ is very low/small. (A) Thermal conductivity (B) Electrical conductivity (C) Specific gravity

Last Answer : (C) Specific gravity

Thermal conductivity of a conducting solid material depends upon its (A) Temperature (B) Porosity (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Thermal conductivity of a conducting solid material depends upon its (A) Temperature (B) Porosity (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

__________ equation relates the thermal conductivity of a solid to its temperature. (A) Antoine (B) Kopp's (C) Lee's (D) Kistyakowsky

Description : __________ equation relates the thermal conductivity of a solid to its temperature. (A) Antoine (B) Kopp's (C) Lee's (D) Kistyakowsky

Last Answer : (C) Lee's