Description : High speed steel tools retain their hardness upto a temperature of __________ °C. (A) 500 (B) 750 (C) 900 (D) 1100
Last Answer : (C) 900
Description : Coal is heated in presence of air to a temperature of about __________ °C, while determining its ash content for proximate analysis. (A) 500 (B) 750 (C) 950 (D) 1100
Last Answer : (B) 750
Description : Low temperature carbonisation of coal takes place at __________ °C. (A) 300 (B) 1100 (C) 700 (D) 900
Last Answer : (C) 700
Description : High temperature carbonisation of coal takes place at __________ °C. (A) 2000 (B) 700 (C) 1100 (D) < 500
Last Answer : (C) 1100
Description : Temperature attained in soldering of metals is about __________ °C. (A) 150-300 (B) 400-500 (C) 650-800 (D) 1000-1100
Last Answer : (A) 150-300
Description : Gasification of the solid fuel converts its organic part into combustible by interaction with air/oxygen and steam so as to obtain a secondary gaseous fuel of high calorific value having no ash. Gasification reactions are ... __________ °C. (A) 400-500 (B) 900-1000 (C) 1400-1500 (D) 1700-1800
Last Answer : (B) 900-1000
Description : Fusion zone in the electric furnace used for reduction of phosphate rock to elemental phosphorous is maintained at __________ °C. (A) 250-300 (B) 500-750 (C) 950-1050 (D) 1400-1450
Last Answer : (D) 1400-1450
Description : High temperature carbonisation of coal takes place at __________ °C. (A) 2000 (B) 600 (C) 1100 (D) 1600
Description : Low temperature carbonisation of coal takes place at __________ °C. (A) 300 (B) 1100 (C) 700
Description : Regeneration of molecular sieve requires it to be heated to a temperature of about __________ °C. (A) 80-120 (B) 200-300 (C) 600-800 (D) 1000-1100
Last Answer : (D) 1000-1100
Description : Seed rate/acre in potato for autumn crop is a. 900-1100 Kg b. 500 Kg c. 400 Kg d. 100 Kg
Last Answer : 900-1100 Kg
Description : Recrystallisation temperature of steel is __________ °C. (A) 50 (B) 300 (C) 500 (D) 800
Last Answer : (D) 800
Description : Metallic recuperators are not used for waste heat recovery, if the hot flue gas temperature is above __________ °C, because corrosion prevails at higher temperatures. (A) 350 (B) 750 (C) 1050 (D) 1250
Description : Coal is heated in absence of air for 7 minutes at a temperature of about __________ °C, during its volatile matter determination for proximateanalysis. (A) 550 (B) 750 (C) 950 (D) 1150
Last Answer : (C) 950
Description : 23.98 × 62.49 × 12.03 = ? × 29.97 a) 500 b) 600 c) 900 d) 450 e) 750
Last Answer : 24× 62.5× 12 = ? × 30 24× 750 = ? × 30 ? = (24× 750) / 30 = 600 Answer: b)
Description : Fusion point of coal ash generally varies from 1000 to 1700° C. Ash having fusion point less than __________ °C is liable to form clinker. (A) 1100 (B) 1250 (C) 1350 (D) 1400
Last Answer : (A) 1100
Description : Most of the plastics are safe to be used upto a maximum temperature of __________ °C. (A) 100 (B) 150 (C) 350 (D) 450
Last Answer : (B) 150
Description : While the fuel fired furnace can be used upto a maximum temperature of about 1700°C, the electric furnace can be used upto a temperature of about __________ °C. (A) 2000 (B) 3000 (C) 4500 (D) 6000
Last Answer : (C) 4500
Description : A mixture of 10% C6H6 vapour in air at 25°C and 750 mm Hg has a dew point of 20°C. Its dew point at 30°C and 700 mm Hg will be around __________ °C. (A) 21.7 (B) 20 (C) 27.3 (D) 18.7
Last Answer : (D) 18.7
Description : Conversion of yellow phosphorous to red phosphorous is done by heating it in covered retorts at __________ °C in absence of air. (A) 50-80 (B) 250-400 (C) 1000-1200 (D) 800-900
Last Answer : (B) 250-400
Description : A centrifugal pump has the following specifications: Power = 4 H.P.; Speed = 800 rpm Head = 8 metres Flow = 1000 litres/minutes. If its speed is halved, the new discharge will be __________ litres/minute. (A) 500 (B) 200 (C) 1000 (D) 750
Last Answer : (A) 500
Description : Alpha iron is stable __________ °C. (A) Above 1403 (B) Upto 910 (C) Above 1800 (D) Between 910 & 1403
Last Answer : (B) Upto 910
Description : Yield of coke oven gas in low temperature carbonisation of coal is about __________ Nm3 /ton of dry coal. (A) 60 (B) 160 (C) 500 (D) 750
Last Answer : (B) 160
Description : Electrolytic reduction cell used for conversion of calcined Al2O3to Al is a carbon lined furnace operating at 800-900 °C. The purpose of electric current supplied to the furnace is to (A) Achieve very high ... by the generation of heat (C) Electrolytically dissociate alumina (D) Both (B) & (C)
Last Answer : (D) Both (B) & (C)
Description : 90% of the caprolactam is converted to nylon-6 on its condensation polymerisation in the reactor maintained at a temperature of __________ °C. (A) -5 (B) 10-30 (C) 250-280 (D) 500-600
Last Answer : (C) 250-280
Description : A thin, flat & square plate measuring 2 m 2 m is freely hanging in ambient air at 25°C. It is exposed to the solar radiation falling on one side of the plate at the rate of 500 W/m2. The plate temperature will ... heat transfer co-efficient is __________ W/m2 °C. (A) 50 (B) 100 (C) 150 (D) 200
Last Answer : (B) 100
Description : Hot extrusion of aluminium is done in the temperature range of __________ °C. (A) 550-600 (B) 450-500 (C) 350-400 (D) 250-300
Last Answer : (C) 350-400
Description : Coke is made by heating coal in the absence of air at: A. 700 °C B. 1300 °C C. 900 °C D. 1700 °C ANSWER: Why are soft drinks made with chilled water rather than water at room ... B. Chilled water enhances the taste C. Chilled water attracts more carbon dioxide D. Chilled water is more hygienic
Last Answer : ANSWER: C
Description : Utilizing the answer to the previous problem, estimate the overall or average increase in temperature ( ΔT) of the concrete roof from the energy absorbed from the sun during a12hour day. Assume that all of the radiation absorbed goes into ... °C b. 8.9°C c. 9.9°C d. 10.9°C formula: ΔQ = m c ΔT
Last Answer : 7.9 °C
Description : In question No. 53 if the economy produces only 3 guns and 900 tons of wheat instead of 1100 tons of wheat what does it indicates (a) Under employment of resources ; (b) Production in efficiency ; (c) Sub-optimal production; (d) All the three
Last Answer : (d) All the three
Description : Non-ferrous alloys used for making cutting tools need not have high (A) Abrasion resistance (B) Toughness (C) Red hardness (D) Cutting speed
Last Answer : (C) Red hardness
Description : As the temperature of ice rises, the ice melts and its density _____. A. Decreases B. Remains constant C. Increases D. Increases upto 10 °C
Description : When welding medium carbon steel plates over 100mm in thickness would the basic electrodes require any pre treatment before use? a) None if they were in a vacuum pack opened 8 hours prior to use b) None if ... ) Heat to 500 °C for 2 hours if used outside d) Baked at 150°C for 4hours prior to use
Last Answer : b) None if they were in a sealed vacuum pack prior to use
Description : The size of a plane table is (A) 750 mm × 900 mm (B) 600 mm × 750 mm (C) 450 mm × 600 mm (D) 300 mm × 450 mm
Last Answer : (B) 600 mm × 750 mm
Description : For a simply supported beam of span 15 m, the minimum effective depth to satisfy the vertical deflection limits should be (A) 600 mm (B) 750 mm (C) 900 mm (D) More than 1 m
Last Answer : Answer: Option B
Description : A train starts from Delhi and reaches Lucknow in 24.5 hours. If it travels the first half of journey at 30 kmph and second half at 40 kmph then what is the total distance it travelled? 1) 750 km 2) 800 km 3) 840 km 4) 900 km 5) 920 km
Last Answer : 3) 840 km
Description : The size of a plane table is (a) 750mm x 900 mm (b) 600mm x 750 mm* (c) 450mm x 600 mm
Last Answer : (b) 600mm x 750 mm*
Description : Powder metallurgy technique is used in the production of __________ tools. (A) Tungsten carbide (B) High carbon steel (C) High speed steel (D) Drilling
Last Answer : Option A
Description : Molecular sieves are regenerated by heating to __________ °C. (A) < 150 (B) 200-330 (C) > 500 (D) > 1000
Last Answer : (B) 200-330
Description : 90% of the caprolactam is converted to nylon-6 on its condensation polymerisation in the reactor maintained at __________ °C. (A) < 0 (B) 10-30 (C) 250-280 (D) 500-600
Last Answer : (B) 10-30
Description : __________ is the process of coating the surface of steel with aluminium oxide, thereby imparting it increased resistance to corrosion & oxidation upto a temperature of 700°C. (A) Veneering (B) Galvanising (C) Electroplating (D) Calorising
Last Answer : (D) Calorising
Description : Coke is made by heating coal in the absence of air at: A. 700 °C B. 1300 °C C. 900 °C D. 1700 °C ANSWER: Most of the ozone in the atmosphere is concentrated in the _____ A. Mesosphere B. Troposphere C. Stratosphere D. Ionosphere
Description : Coke is made by heating coal in the absence of air at-----? A. 700 °C B. 900 °C C. 1300 °C (Answer) D. 1700 °C
Last Answer : C. 1300 °C (Answer)
Description : A high temperature waste heat recovery unit consists of recovering waste heat at temperaturesgreater than _______. a) 200 °C b) 500 °C c) 300 °C d) 400 °C
Last Answer : 400 °C
Description : In Joule's experiment, an insulated container contains 20 kg of waterinitially at 25°C. It is stirred by an agitator, which is made to turn by a slowly falling body weighing 40 kg through a height of 4 m. The process is repeated ... temperature of water (in °C) is (A) 40.5 (B) 34.4 (C) 26.8 (D) 25
Last Answer : (B) 34.4
Description : What is the range of tempering temperature (°C) for most of the materials? (A) 75-100 (B) 200-300 (C) 350-450 (D) 500-600
Last Answer : (B) 200-300
Description : Electrical machines having a power output upto about 750 W may be called_______machines. (a) small size (b) medium size (c) large size (d) any of the above
Last Answer : (a) small size
Description : The ability of tool steel to resist softening at high temperatures is termed as __________ hardness. (A) Red (B) Extended (C) Super (D) Extreme
Last Answer : (C) Super