Coal is heated in presence of air to a temperature of about __________ °C, while determining its ash content for proximate analysis. (A) 500 (B) 750 (C) 950 (D) 1100

Coal is heated in presence of air to a temperature of about __________
°C, while determining its ash content for proximate analysis.
(A) 500
(B) 750
(C) 950
(D) 1100
by

1 Answer

Answer :

(B) 750
by

Related questions

Coal is heated in absence of air for 7 minutes at a temperature of about __________ °C, during its volatile matter determination for proximateanalysis.(A) 550(B) 750(C) 950(D) 1150

Description : Coal is heated in absence of air for 7 minutes at a temperature of about __________ °C, during its volatile matter determination for proximateanalysis. (A) 550 (B) 750 (C) 950 (D) 1150

Last Answer : (C) 950

Proximate analysis of coal determines its __________ content. (A) Moisture, ash, sulphur & volatile matter (B) Moisture, volatile matter, ash & fixed carbon (C) Moisture, sulphur, nitrogen & fixed carbon (D) None of these

Description : Proximate analysis of coal determines its __________ content. (A) Moisture, ash, sulphur & volatile matter (B) Moisture, volatile matter, ash & fixed carbon (C) Moisture, sulphur, nitrogen & fixed carbon (D) None of these

Last Answer : (B) Moisture, volatile matter, ash & fixed carbon

Proximate analysis of coal determines its __________ content. (A) Moisture, ash, sulphur & volatile matter (B) Moisture & volatile matter (C) Moisture, sulphur, nitrogen & fixed carbon (D) None of these

Description : Proximate analysis of coal determines its __________ content. (A) Moisture, ash, sulphur & volatile matter (B) Moisture & volatile matter (C) Moisture, sulphur, nitrogen & fixed carbon (D) None of these

Last Answer : (B) Moisture & volatile matter

High speed steel tools retain their hardness upto a temperature of __________ °C.(A) 500 (B) 750 (C) 900 (D) 1100

Description : High speed steel tools retain their hardness upto a temperature of __________ °C. (A) 500 (B) 750 (C) 900 (D) 1100

Last Answer : (C) 900

High speed steel tools retain their hardness upto a temperature of __________ °C. (A) 500 (B) 750 (C) 900 (D) 1100

Description : High speed steel tools retain their hardness upto a temperature of __________ °C. (A) 500 (B) 750 (C) 900 (D) 1100

Last Answer : Option C

Fusion zone in the electric furnace used for reduction of phosphate rock to elemental phosphorous is maintained at __________ °C. (A) 250-300 (B) 500-750 (C) 950-1050 (D) 1400-1450

Description : Fusion zone in the electric furnace used for reduction of phosphate rock to elemental phosphorous is maintained at __________ °C. (A) 250-300 (B) 500-750 (C) 950-1050 (D) 1400-1450

Last Answer : (D) 1400-1450

Fusion point of coal ash generally varies from 1000 to 1700° C. Ash having fusion point less than __________ °C is liable to form clinker. (A) 1100 (B) 1250 (C) 1350 (D) 1400

Description : Fusion point of coal ash generally varies from 1000 to 1700° C. Ash having fusion point less than __________ °C is liable to form clinker. (A) 1100 (B) 1250 (C) 1350 (D) 1400

Last Answer : (A) 1100

High temperature carbonisation of coal takes place at __________ °C. (A) 2000 (B) 700 (C) 1100 (D) < 500

Description : High temperature carbonisation of coal takes place at __________ °C. (A) 2000 (B) 700 (C) 1100 (D) < 500

Last Answer : (C) 1100

Regeneration of molecular sieve requires it to be heated to a temperature of about __________ °C. (A) 80-120 (B) 200-300 (C) 600-800 (D) 1000-1100

Description : Regeneration of molecular sieve requires it to be heated to a temperature of about __________ °C. (A) 80-120 (B) 200-300 (C) 600-800 (D) 1000-1100

Last Answer : (D) 1000-1100

Temperature attained in soldering of metals is about __________ °C. (A) 150-300 (B) 400-500 (C) 650-800 (D) 1000-1100

Description : Temperature attained in soldering of metals is about __________ °C. (A) 150-300 (B) 400-500 (C) 650-800 (D) 1000-1100

Last Answer : (A) 150-300

Low temperature carbonisation of coal takes place at __________ °C. (A) 300 (B) 1100 (C) 700

Description : Low temperature carbonisation of coal takes place at __________ °C. (A) 300 (B) 1100 (C) 700

Last Answer : (C) 700

High temperature carbonisation of coal takes place at __________ °C. (A) 2000 (B) 600 (C) 1100 (D) 1600

Description : High temperature carbonisation of coal takes place at __________ °C. (A) 2000 (B) 600 (C) 1100 (D) 1600

Last Answer : (C) 1100

Low temperature carbonisation of coal takes place at __________ °C. (A) 300 (B) 1100 (C) 700 (D) 900

Description : Low temperature carbonisation of coal takes place at __________ °C. (A) 300 (B) 1100 (C) 700 (D) 900

Last Answer : (C) 700

Gasification of the solid fuel converts its organic part into combustible by interaction with air/oxygen and steam so as to obtain a secondary gaseous fuel of high calorific value having no ash. Gasification reactions are normally carried out at about __________ °C. (A) 400-500 (B) 900-1000 (C) 1400-1500 (D) 1700-1800

Description : Gasification of the solid fuel converts its organic part into combustible by interaction with air/oxygen and steam so as to obtain a secondary gaseous fuel of high calorific value having no ash. Gasification reactions are ... __________ °C. (A) 400-500 (B) 900-1000 (C) 1400-1500 (D) 1700-1800

Last Answer : (B) 900-1000

__________ of the coal is the basis for Seylor's coal classification. (A) Proximate analysis (B) Ultimate analysis (C) Caking index (D) Calorific value

Description : __________ of the coal is the basis for Seylor's coal classification. (A) Proximate analysis (B) Ultimate analysis (C) Caking index (D) Calorific value

Last Answer : (B) Ultimate analysis

In Dry farming, what is the annual rainfall (in mm) available? a. A Less than 550 mm b. B Less than 500 mm c. C Less than 950 mm d. D Less than 750 mm

Description : In Dry farming, what is the annual rainfall (in mm) available? a. A Less than 550 mm b. B Less than 500 mm c. C Less than 950 mm d. D Less than 750 mm

Last Answer : d. D Less than 750 mm

Ultimate analysis of coal determines its __________ content. (A) Carbon, hydrogen, nitrogen & sulphur (B) Carbon, ash, sulphur & nitrogen (C) Carbon, sulphur, volatile matter & ash (D) Carbon, volatile matter, ash & moisture

Description : Ultimate analysis of coal determines its __________ content. (A) Carbon, hydrogen, nitrogen & sulphur (B) Carbon, ash, sulphur & nitrogen (C) Carbon, sulphur, volatile matter & ash (D) Carbon, volatile matter, ash & moisture

Last Answer : (A) Carbon, hydrogen, nitrogen & sulphur

Ultimate analysis of coal determines its __________ content. (A) Carbon, hydrogen, nitrogen & sulphur (B) Carbon, ash, sulphur & nitrogen(C) Carbon, sulphur, volatile matter & ash(D) Carbon, volatile matter, ash & moisture

Description : Ultimate analysis of coal determines its __________ content. (A) Carbon, hydrogen, nitrogen & sulphur (B) Carbon, ash, sulphur & nitrogen (C) Carbon, sulphur, volatile matter & ash (D) Carbon, volatile matter, ash & moisture

Last Answer : (C) Carbon, sulphur, volatile matter & ash

Yield of coke oven gas in low temperature carbonisation of coal is about __________ Nm3 /ton of dry coal. (A) 60 (B) 160 (C) 500 (D) 750

Description : Yield of coke oven gas in low temperature carbonisation of coal is about __________ Nm3 /ton of dry coal. (A) 60 (B) 160 (C) 500 (D) 750

Last Answer : (B) 160

Typical waste gases temperature from glass melting furnace a) 1000-1550 oC b) 800-950 oC c) 650–750 oC d) 760-815 oC

Description : Typical waste gases temperature from glass melting furnace a) 1000-1550 oC b) 800-950 oC c) 650–750 oC d) 760-815 oC

Last Answer : 1000-1550 oC

A mixture of 10% C6H6 vapour in air at 25°C and 750 mm Hg has a dew point of 20°C. Its dew point at 30°C and 700 mm Hg will be around __________ °C. (A) 21.7 (B) 20 (C) 27.3 (D) 18.7

Description : A mixture of 10% C6H6 vapour in air at 25°C and 750 mm Hg has a dew point of 20°C. Its dew point at 30°C and 700 mm Hg will be around __________ °C. (A) 21.7 (B) 20 (C) 27.3 (D) 18.7

Last Answer : (D) 18.7

State the difference between ultimate and proximate analysis of coal ?

Description : State the difference between ultimate and proximate analysis of coal ?

Last Answer : In ultimate analysis, chemical determination of following elements is made by weight: Fixed and combined carbon, H, O, N, S, water and ash. Heating value is due to C, H and S. In ... Moisture, volatile matter, fixed carbon and ash. Heating value is due to fixed carbon and volatile matter.

Which two elements have same percentage in proximate and ultimate analysis of coal?

Description : Which two elements have same percentage in proximate and ultimate analysis of coal?

Last Answer : Moisture and ash.

Metallic recuperators are not used for waste heat recovery, if the hot flue gas temperature is above __________ °C, because corrosion prevails at higher temperatures. (A) 350 (B) 750 (C) 1050 (D) 1250

Description : Metallic recuperators are not used for waste heat recovery, if the hot flue gas temperature is above __________ °C, because corrosion prevails at higher temperatures. (A) 350 (B) 750 (C) 1050 (D) 1250

Last Answer : (B) 750

In producer gas making furnace, steam is added along with air to mainly control the (A) Fusion of coal ash & clinker formation (B) C. V. of producer gas (C) Temperature of producer gas (D) Tar content in producer gas

Description : In producer gas making furnace, steam is added along with air to mainly control the (A) Fusion of coal ash & clinker formation (B) C. V. of producer gas (C) Temperature of producer gas (D) Tar content in producer gas

Last Answer : (A) Fusion of coal ash & clinker formation

A thin, flat & square plate measuring 2 m × 2 m is freely hanging in ambient air at 25°C. It is exposed to the solar radiation falling on one side of the plate at the rate of 500 W/m2. The plate temperature will remain constant at 30°C, if the convective heat transfer co-efficient is __________ W/m2 °C. (A) 50 (B) 100 (C) 150 (D) 200

Description : A thin, flat & square plate measuring 2 m 2 m is freely hanging in ambient air at 25°C. It is exposed to the solar radiation falling on one side of the plate at the rate of 500 W/m2. The plate temperature will ... heat transfer co-efficient is __________ W/m2 °C. (A) 50 (B) 100 (C) 150 (D) 200

Last Answer : (B) 100

The wet and 'dry bulb temperature for a vapour-gas mixture are 25°C and 30°C respectively. If the mixture is heated to 45°C at constant pressure, the wet bulb temperature will be __________ °C. (A) 25 (B) > 25 (C) < 25 (D) - 25

Description : The wet and 'dry bulb temperature for a vapour-gas mixture are 25°C and 30°C respectively. If the mixture is heated to 45°C at constant pressure, the wet bulb temperature will be __________ °C. (A) 25 (B) > 25 (C) < 25 (D) - 25

Last Answer : (B) > 25

The specific gravity of coal depends mainly on its __________ content. (A) Carbon (B) Volatile matter (C) Ash (D) Moisture

Description : The specific gravity of coal depends mainly on its __________ content. (A) Carbon (B) Volatile matter (C) Ash (D) Moisture

Last Answer : (C) Ash

Fusion point of coal ash increases with increase in its __________ content. (A) Iron sulphate (B) Iron silicate (C) Lime and magnesia (D) All (A), (B) and (C)

Description : Fusion point of coal ash increases with increase in its __________ content. (A) Iron sulphate (B) Iron silicate (C) Lime and magnesia (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The specific gravity of coal depends mainly on its __________ content. (A) Carbon (B) Volatile matter (C) Ash (D) Moisture

Description : The specific gravity of coal depends mainly on its __________ content. (A) Carbon (B) Volatile matter (C) Ash (D) Moisture

Last Answer : Option D

A good coking coal should have high __________ content. (A) Ash (B) Sulphur & phosphorus (C) Moisture (D) None of these

Description : A good coking coal should have high __________ content. (A) Ash (B) Sulphur & phosphorus (C) Moisture (D) None of these

Last Answer : (D) None of these

Degree of carbonisation of coal during coke making can be roughly judged by the __________ of the coke produced. (A) Colour (B) Moisture content (C) Ash content (D) Volatile matter

Description : Degree of carbonisation of coal during coke making can be roughly judged by the __________ of the coke produced. (A) Colour (B) Moisture content (C) Ash content (D) Volatile matter

Last Answer : (D) Volatile matter

A coal with high __________ content, would ignite most easily. (A) Fixed carbon (B) Volatile matter (C) Ash (D) Oxygen

Description : A coal with high __________ content, would ignite most easily. (A) Fixed carbon (B) Volatile matter (C) Ash (D) Oxygen

Last Answer : (B) Volatile matter

Ash content in the coke produced from a coking coal having 20% ash may be around __________ percent. (A) 6 (B) 12 (C) 18 (D) 24

Description : Ash content in the coke produced from a coking coal having 20% ash may be around __________ percent. (A) 6 (B) 12 (C) 18 (D) 24

Last Answer : (D) 24

Ash content in the middling coal (a byproduct of coal washeries) in India ranges between __________ percent. (A) 15 to 25 (B) 35 to 45 (C) 55 to 75 (D) 75

Description : Ash content in the middling coal (a byproduct of coal washeries) in India ranges between __________ percent. (A) 15 to 25 (B) 35 to 45 (C) 55 to 75 (D) 75

Last Answer : (B) 35 to 45

A coal containing high amount of volatile matter will have (A) Low ignition temperature (B) Very little ash content (C) High fusion point of its ash (D) Low adiabatic flame temperature

Description : A coal containing high amount of volatile matter will have (A) Low ignition temperature (B) Very little ash content (C) High fusion point of its ash (D) Low adiabatic flame temperature

Last Answer : (A) Low ignition temperature

Amount of coal lost in ash particle, which is carried through the boiler system, depends upon the (A) Physical nature, ash content and fineness of the coal (B) Amount of excess air supplied and load on the boiler (C) Type of burner and combustion chamber (D) All (A), (B) and (C)

Description : Amount of coal lost in ash particle, which is carried through the boiler system, depends upon the (A) Physical nature, ash content and fineness of the coal (B) Amount of excess air supplied and load on the boiler (C) Type of burner and combustion chamber (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A coal having higher volatile matter content will necessarily have lower (A) Ash fusion temperature (B) Calorific value (C) Ignition temperature (D) Caking index

Description : A coal having higher volatile matter content will necessarily have lower (A) Ash fusion temperature (B) Calorific value (C) Ignition temperature (D) Caking index

Last Answer : (C) Ignition temperature

The ratio of % total carbon obtained in the ultimate analysis of coke and % fixed carbon obtained in the proximate analysis is always (A) 1 (B) < 1 (C) > 1

Description : The ratio of % total carbon obtained in the ultimate analysis of coke and % fixed carbon obtained in the proximate analysis is always (A) 1 (B) < 1 (C) > 1

Last Answer : (C) > 1

90% of the caprolactam is converted to nylon-6 on its condensation polymerisation in the reactor maintained at a temperature of __________ °C. (A) -5 (B) 10-30 (C) 250-280 (D) 500-600

Description : 90% of the caprolactam is converted to nylon-6 on its condensation polymerisation in the reactor maintained at a temperature of __________ °C. (A) -5 (B) 10-30 (C) 250-280 (D) 500-600

Last Answer : (C) 250-280

Hot extrusion of aluminium is done in the temperature range of __________ °C. (A) 550-600 (B) 450-500 (C) 350-400 (D) 250-300

Description : Hot extrusion of aluminium is done in the temperature range of __________ °C. (A) 550-600 (B) 450-500 (C) 350-400 (D) 250-300

Last Answer : (C) 350-400

Recrystallisation temperature of steel is __________ °C. (A) 50 (B) 300 (C) 500 (D) 800

Description : Recrystallisation temperature of steel is __________ °C. (A) 50 (B) 300 (C) 500 (D) 800

Last Answer : (D) 800

Exothermic condensation reaction of monochlorobenzene with chloral in presence of 20% oleum as catalyst produces DDT. The reaction temperature is maintained at __________ °C. (A) 15-30 (B) 90-100 (C) 250-300 (D) < 0

Description : Exothermic condensation reaction of monochlorobenzene with chloral in presence of 20% oleum as catalyst produces DDT. The reaction temperature is maintained at __________ °C. (A) 15-30 (B) 90-100 (C) 250-300 (D) < 0

Last Answer : (A) 15-30

The temperature at which plastic layer formation takes place during carbonisation of coal varies from __________ °C. (A) 100 to 150 (B) 350 to 450 (C) 550 to 650 (D) 700 to 850

Description : The temperature at which plastic layer formation takes place during carbonisation of coal varies from __________ °C. (A) 100 to 150 (B) 350 to 450 (C) 550 to 650 (D) 700 to 850

Last Answer : (B) 350 to 450

Describe ultimate analysis and proximate analysis of solid fuel

Description : Describe ultimate analysis and proximate analysis of solid fuel 

Last Answer : Ultimate Analysis: Ultimate analysis is complete breakdown of coal into Chemical constituents. This analysis is important for large scale trials. It serves the basis For calculation of the amount of ... sulphur is determined separately. This analysis also used to determine heating value of the coal.

Explain the significance of proximate analysis.

Description : Explain the significance of proximate analysis. 

Last Answer : Significance: Proximate analysis provides following valuable information in assessing the quality of fuel i) Moisture: - Lesser the moisture better is the quality of coal. ii) Volatile Matter: - Lower / ... iv) Fixed Carbon: - Higher the percentage of fixed carbon, greater is the calorific value.

Thermal pollution of water increases its toxicity and oxidation of oxygen demanding waste besides favouring bacterial growth. A rise in water temperature by 10°C, doubles the toxic effects of __________ present in it. (A) Coal ash (B) Potassium cyanide (C) Ortho-xylene (D) None of these

Description : Thermal pollution of water increases its toxicity and oxidation of oxygen demanding waste besides favouring bacterial growth. A rise in water temperature by 10°C, doubles the toxic effects of __________ present in it. (A) Coal ash (B) Potassium cyanide (C) Ortho-xylene (D) None of these

Last Answer : (B) Potassium cyanide

Softening temperature of coal ash is a measure of the __________ of coal. (A) Caking tendency (B) Coking tendency (C) Clinkering tendency (D) Size stability

Description : Softening temperature of coal ash is a measure of the __________ of coal. (A) Caking tendency (B) Coking tendency (C) Clinkering tendency (D) Size stability

Last Answer : (C) Clinkering tendency