Description : Presence of manganese in alloy steel improves its (A) Corrosion resistance (B) Cutting ability (C) Abrasion resistance & toughness (D) Elasticity & creep resistance
Last Answer : (C) Abrasion resistance & toughness
Description : Shock resisting steels should possess high (A) Hardness (B) Toughness (C) Tensile strength (D) Wear resistance
Last Answer : (B) Toughness
Description : Nylon-6 as compared to nylon 66 has lower (A) Abrasion resistance (B) Thermal stability (C) Adhesion to rubber (D) Hardness
Last Answer : (A) Abrasion resistance
Description : Higher percentage of ash in coal meant for the production of metallurgical grade coke (A) Decreases the hardness of coke (B) Decreases the abrasion resistance of coke (C) Causes brittleness in steel (D) None of these
Last Answer : (D) None of these
Description : Increase in ash content of blast furnace coke (A) Reduces its consumption in the furnace (B) Increases its consumption in the furnace (C) Does not affect its consumption in the furnace (D) Decreases its hardness and abrasion resistance
Last Answer : (B) Increases its consumption in the furnace
Description : Nylon-6 as compared to Nylon-66 is having higher (A) Hardness (B) Abrasion/resistance (C) Melting point (D) None of these
Description : M10 index of coke indicates its (A) Compressive strength (B) Hardness (C) Abrasion resistance (D) Impact strength
Last Answer : Option C
Description : M10 index of coke indicates its (A) Compressive strength (B) Hardness (C) Abrasion resistance (D) Impact strength Answer: Option C
Description : The ability of a material to offer resistance to scratching or indentation is a measure of its (A) Brittleness (B) Toughness (C) Hardness (D) Resilience
Last Answer : (C) Hardness
Description : Nickel as a material of construction (A) Is used as an alloying element for both ferrous & non-ferrous alloys (B) Is paramagnetic below 415° C (its Curie temperature) (C) Diamagnetic (D) Has a body centred cubic (bcc) crystal lattice structure
Last Answer : (A) Is used as an alloying element for both ferrous & non-ferrous alloys
Description : The addition of antimony in tin-based alloys improves its (A) Rupture strength and hot hardness (B) Impact strength and bonding strength (C) Deformation resistance (D) Wear resistance
Last Answer : (C) Deformation resistance
Description : Alloys having more than 80% copper are generally more (A) Abrasion resistant (B) Corrosion resistant (C) Prone to season cracking (D) Machinable
Last Answer : (B) Corrosion resistant
Description : Weld decay will cause which of the following problems? a) A reduced resistance to corrosion b) a lower tensile strength c) The toughness is reduced d) The hardness will increase
Last Answer : a) A reduced resistance to corrosion
Description : Which of the following tests measures the toughness of road aggregates? (A) Crushing strength test (B) Abrasion test (C) Impact test (D) Shape test
Last Answer : Answer: Option C
Description : Pick out the wrong statement. (A) Cokes of high reactivity are obtained from weakly coking coals (B) Cokes of high reactivity are obtained from strongly coking coals (C) Reactivity of coke is inversely proportional to its absolute density (D) Abrasion index of the coke is a measure of its hardness
Last Answer : (B) Cokes of high reactivity are obtained from strongly coking coals
Description : Muntz metal is a/an alloys of (A) Magnesium & tin (B) Ferrous material (C) Lead & tin (D) Copper & zinc
Last Answer : (D) Copper & zinc
Description : Nylon-66 compared to nylon-6 has (A) Lower melting point (B) More abrasion resistant properties (C) Higher hardness (D) All (A), (B) and (C)
Last Answer : (C) Higher hardness
Description : Detrimental property of a material for shock load applications (a) High density (b) Low toughness (c) High strength (d) Low hardness
Last Answer : (b) Low toughness
Description : Grindability of a material does not depend upon its (A) Elasticity (B) Hardness (C) Toughness (D) Size
Last Answer : (D) Size
Description : _______ property of a material is determined by the Herbert Pendulum device. (A) Hardness (B) Tensile (C) Toughness (D) Compressive
Last Answer : (A) Hardness
Description : Pick out the correct statement. (A) Hot worked materials are subjected to annealing to remove internal stresses (B) Annealing of steel hardens it slightly (C) Normalising of a material induces stresses (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness
Last Answer : (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness Share
Description : High speed steel should have high (A) Toughness (B) Wear resistance (C) Hardenability (D) Both (B) & (C)
Last Answer : (D) Both (B) & (C)
Description : Stellite is a __________ material. (A) Ferrous (B) Ceramic (C) Cemented carbide (D) Non-ferrous cast alloy cutting tool
Last Answer : (D) Non-ferrous cast alloy cutting tool
Description : High speed steel tools retain their hardness upto a temperature of __________ °C. (A) 500 (B) 750 (C) 900 (D) 1100
Last Answer : (C) 900
Description : List any four properties of ferrous alloys.
Last Answer : Properties of ferrous alloys: a) Heat resistant alloy steel - i. hard wearing and offer resistance to large variation in temperatures. ii. corrosion resistance iii. oxidation resistance iv. ... to chromium content. ii. Non-magnetic iii. Good weldability iv. Good heat resistant.
Description : Chrome vanadium steels usually contain 0.8 to 1.1% Cr, 0.25 to 0.35% C and < 0.25% V. It is (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives (B) ... resistance (C) Having poor toughness (D) Not helpful in producing cleaner steel due to oxidising action of vanadium
Last Answer : (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives
Description : Addition of tungsten to steel imparts (A) Magnetic properties (B) Cutting hardness (C) Corrosion resistance (D) Ductility
Last Answer : (B) Cutting hardness
Description : The area under stress-strain curve represents a.Hardness of material b.Breaking strength of the material c.Energy required to cause failure d.Toughness of material e.Malleabbility of material
Last Answer : c. Energy required to cause failure
Description : The ability of materials to develop a characteristic behavior under repeated loading known as ___________ a) Toughness b) Resilience c) Hardness d) Fatigue
Last Answer : d) Fatigue
Description : Smith's test of stones is performed to find out (A) The presence of soluble matter of stone (B) The compressive strength of the stone (C) The hardness of the stone (D) The toughness of the stone
Last Answer : Answer: Option A
Description : The important test to be conducted on a stone used in docks and harbours is (A) Hardness test (B) Workability test (C) Weight test (D) Toughness test
Description : Define the terms: i) Hardness ii) Toughness iii) Brazing iv) Machinability
Last Answer : i) Hardness:- Hardness is the property of metal possessed by a material which enables it to resist penetration or abrasion or scratching by other material. Diamond is the hardest of known materials. ... can be easily cut by cutting tools to produce a desired shape & surface finish on its surface
Description : Abrasion, cutting, and peeling are examples of what type of protective material removal?
Last Answer : Mechanical.
Description : __________ is the trade name assigned to a non-ferrous cast alloy composed of cobalt, chromium & tungsten. (A) Stellite (B) High speed steel (C) Cermet (D) Alnico
Last Answer : Option A
Description : High ash containing coke (A) Produces more slag when used in the blast furnace (B) Has poor strength and abrasion resistance (C) Is desirable in producer gas manufacture (D) None of these
Last Answer : (A) Produces more slag when used in the blast furnace
Description : Cermets are used for making (A) Cutting tools (B) Abrasives (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) & (B)
Description : Cold work tool steel should have (A) High toughness (B) Poor hardenability (C) High wear resistance (D) All (A), (B) & (C)
Last Answer : (C) High wear resistance
Description : __________ furnace is generally used in the non-ferrous foundries. (A) Direct arc (B) Indirect arc (C) Resistance (D) Induction
Last Answer : (B) Indirect arc
Description : High degree of toughness is a must for (A) High speed steel (B) Shock resisting steel (C) Cold work tool steel (D) None of these
Last Answer : (B) Shock resisting steel
Description : The pigment used in paints for corrosive resistance, is (A) White lead (B) Ferrous oxide (C) Zinc white (D) Red lead
Last Answer : Answer: Option D
Description : Monel alloy is (A) The costliest of all the alloys of nickel (B) Not suitable for making kitchen utensils (C) Used for making steam valves and turbine blades as it resists steam attack at high temperature (D) Not used in cast and wrought forms
Last Answer : (C) Used for making steam valves and turbine blades as it resists steam attack at high temperature
Description : High resistance electrical heating elements/wire are not made of (A) Maraging steel (B) Nimonic alloys (C) Kanthal wire (D) Nichrome
Last Answer : (A) Maraging steel
Description : Principal alloying elements of cast tool alloys which have very high wear resistance & high temperature strength are (A) Cobalt, chromium & tungsten (B) Cobalt, chromium & nickel (C) Molybdenum, tungsten & chromium (D) Cobalt, zirconium & molybdenum
Last Answer : : Option A
Description : Log Angles machine is used to test the aggregate for (A) Crushing strength (B) Impact value (C) Abrasion resistance (D) Water absorption
Description : Los Angles machine is used to perform (a) Crushing strength (b) Impact test (c) Water absorption (d) Abrasion resistance test
Last Answer : (d) Abrasion resistance test
Description : The resistance of an aggregates to wear is known as (a) Shear value (b) Crushing value (c)Abrasion value (d) Impact value
Last Answer : (c)Abrasion value
Description : The resistance of an aggregates to compressive forces is known as (a) Crushing value (b) Impact value (c)Abrasion value (d) None of these
Last Answer : (a) Crushing value
Description : The clinical advantage of porcelain laminate veneers over composite resin veneers is: A. Color stability and resistance to abrasion B. Availability of self-curing or light activated placement (yes but not ... dentist's abilities) D. May be used in edge to edge occlusion or Class III relationships.
Last Answer : A. Color stability and resistance to abrasion
Description : The largest consumption of zinc for alloys is in the making of (A) Bearing metal (B) Brasses (C) Brazing solder
Last Answer : (B) Brasses