Adopted planting system of orchard in Pakistan is: a. Square system b. Rectangular system c. Hexagonal system d. All of above

Adopted planting system of orchard in Pakistan is:
a. Square system
b. Rectangular system
c. Hexagonal system
d. All of above
by

1 Answer

Answer :

Square system
by

Related questions

For good pollination in papaya orchard it is necessary that male plants should be a. 5-10% b. 40-45% c. 50-55% d. 70-75%

Description : For good pollination in papaya orchard it is necessary that male plants should be a. 5-10% b. 40-45% c. 50-55% d. 70-75%

Last Answer : 5-10%

Which method of planting is most suitable for Tea crop ? a. Square b. Triangular c. Contour d. Rectangular

Description : Which method of planting is most suitable for Tea crop ? a. Square b. Triangular c. Contour d. Rectangular

Last Answer : b. Triangular

Which of the following is the proper recommendation for pruning trees at planting. a. Pruning should be limited to shaping the plant by removing dead or damaged limbs b. Trees should be cut back to at least one-half their size to prevent stress on root systems c. Trees should not be pruned until the third year after planting d. Trees should not be pruned at all – the latest trend is to let them develop naturally

Description : Which of the following is the proper recommendation for pruning trees at planting. a. Pruning should be limited to shaping the plant by removing dead or damaged limbs b. Trees should be cut back to at ... d. Trees should not be pruned at all - the latest trend is to let them develop naturally

Last Answer : Pruning should be limited to shaping the plant by removing dead or damaged limbs

Pansy is very popular annual due to its: a. Stem and foliage beauty b. Hardiness toward ground cover c. Planting under shad. d. Mix colour flowers bedding plant.

Description : Pansy is very popular annual due to its: a. Stem and foliage beauty b. Hardiness toward ground cover c. Planting under shad. d. Mix colour flowers bedding plant.

Last Answer : Mix colour flowers bedding plant.

Potato cut tuber are used for planting during a. Autumn crop b. Spring crop c. Both of above d. None of above

Description : Potato cut tuber are used for planting during a. Autumn crop b. Spring crop c. Both of above d. None of above

Last Answer : Spring crop

The 'centre line method' is specially adopted for estimating (A) Circular buildings (B) Hexagonal buildings (C) Octagonal buildings (D) All the above

Description : The 'centre line method' is specially adopted for estimating (A) Circular buildings (B) Hexagonal buildings (C) Octagonal buildings (D) All the above

Last Answer : (D) All the above

If the width of the foundation for two equal columns is restricted, the shape of the footing generally adopted, is (A) Square (B) Rectangular (C) Trapezoidal (D) Triangular

Description : If the width of the foundation for two equal columns is restricted, the shape of the footing generally adopted, is (A) Square (B) Rectangular (C) Trapezoidal (D) Triangular

Last Answer : Answer: Option B

STL consists of an unordered list of _______ facets representing the outside skin of an object. a.linear b.triangular c.square d.hexagonal

Description : STL consists of an unordered list of _______ facets representing the outside skin of an object. a.linear b.triangular c.square d.hexagonal

Last Answer : b.triangular

Which of the following requires more space for the rotation of spanner? a) Square Head b) Hexagonal Head c) Both require equal space of rotation d) Cannot be stated

Description : Which of the following requires more space for the rotation of spanner? a) Square Head b) Hexagonal Head c) Both require equal space of rotation d) Cannot be stated

Last Answer : a) Square Head

In Pakistan, yield of potato range between : a. 10-15 ton b. 15-20 ton c. 20-25 ton d. 25-30 ton

Description : In Pakistan, yield of potato range between : a. 10-15 ton b. 15-20 ton c. 20-25 ton d. 25-30 ton

Last Answer : 20-25 ton

All commercial date palm orchards in Pakistan are pollinated by a. Insects b. Winds c. Natural d. Manual

Description : All commercial date palm orchards in Pakistan are pollinated by a. Insects b. Winds c. Natural d. Manual

Last Answer : Manual

The coldest region for citrus growing is a. U.S.A. b. New Zealand c. Australia d. Pakistan

Description : The coldest region for citrus growing is a. U.S.A. b. New Zealand c. Australia d. Pakistan

Last Answer : New Zealand

Common rootstocks for apple in Pakistan a. M-7 b. M-9 c. Crab apple d. Sky spur

Description : Common rootstocks for apple in Pakistan a. M-7 b. M-9 c. Crab apple d. Sky spur

Last Answer : Crab apple

Mango varieties in Pakistan are a. Monoembryonic b. Polyembryonic c. Mono to Polyembryonic d. None

Description : Mango varieties in Pakistan are a. Monoembryonic b. Polyembryonic c. Mono to Polyembryonic d. None

Last Answer : Monoembryonic

In Pakistan, vegetables for seed production are harvested by: a. Manual method b. Machines c. Combine harvestors d. All of above

Description : In Pakistan, vegetables for seed production are harvested by: a. Manual method b. Machines c. Combine harvestors d. All of above

Last Answer : Manual method

The most common pollinator insect in Pakistan is a. Syrphid fly b. Bumble bees c. Honey bees d. House fly

Description : The most common pollinator insect in Pakistan is a. Syrphid fly b. Bumble bees c. Honey bees d. House fly

Last Answer : Honey bees

Lawn sprinkler systems are installed so as to provide even coverage. It is accomplished by: a. Spacing the heads so that each sprinkler sprays to the next sprinkler b. Using sprinkler heads with a square pattern throughout the landscape c. Spacing sprinklers based on needs specified in the soil test d. Using one size pipe throughout the landscape

Description : Lawn sprinkler systems are installed so as to provide even coverage. It is accomplished by: a. Spacing the heads so that each sprinkler sprays to the next sprinkler b. Using sprinkler heads ... sprinklers based on needs specified in the soil test d. Using one size pipe throughout the landscape

Last Answer : Spacing the heads so that each sprinkler sprays to the next sprinkler

Is there another name for an Orchard Gun?

Description : Is there another name for an Orchard Gun?

Last Answer : They call them propane guns around here.

Does anyone know how to make "orchard syrup"?

Description : Does anyone know how to make "orchard syrup"?

Last Answer : Apparently folks think it might be something made from apples. This guy talks about it and suggests using this recipe. He uses it in making a pre-Prohibition drink called the St. Croix Crusta: 1 dash ... . He has a picture posted of a female friend who looks as though she is enjoying the result.

What is the proper procedure for watering orchard of various pitted fruit trees around 4 years old?

Description : What is the proper procedure for watering orchard of various pitted fruit trees around 4 years old?

Last Answer : Need Answer

Why,Sonia earned $2,100 at her uncle's orchard. If she worked for 70 weeks and earned the same amount of money each week, What did she earn per week?

Description : Why,Sonia earned $2,100 at her uncle's orchard. If she worked for 70 weeks and earned the same amount of money each week, What did she earn per week?

Last Answer : plz help

What does romeo claim he was able to get over the orchard walls why is romeo unafraid of Juliet kinsmen?

Description : What does romeo claim he was able to get over the orchard walls why is romeo unafraid of Juliet kinsmen?

Last Answer : Need answer

Hand atomizer is used for spraying in: A. Nursery B. Orchard C. Field crop D. None of these

Description : Hand atomizer is used for spraying in: A. Nursery B. Orchard C. Field crop D. None of these

Last Answer : Nursery

0ff-set disc harrows are best suitable to work for a) primary implement b) breaking clods c) orchard cultivation d) surface finishing

Description : 0ff-set disc harrows are best suitable to work for a) primary implement b) breaking clods c) orchard cultivation d) surface finishing

Last Answer : c) orchard cultivation

Herbicidal control of pre-established thatch grass (Imperata cylindrical) con trol in tea orchard a). Glyphosate + 2,4-D b). Oxyflourfen + 2,4-D c). Diuron + 2,4-D d). Paraquat + 2,4-D

Description : Herbicidal control of pre-established thatch grass (Imperata cylindrical) con trol in tea orchard a). Glyphosate + 2,4-D b). Oxyflourfen + 2,4-D c). Diuron + 2,4-D d). Paraquat + 2,4-D

Last Answer : a). Glyphosate + 2,4-D

How to Make an Orchard ?

Description : How to Make an Orchard ?

Last Answer : How to Make an Orchard You own a piece of land that you want to put to good use. Why not make a backyard orchard? Here are some steps and tips to guide you in making one. Things you will ... and love your orchard like you would your family. Just like anyone else, it also needs tender loving care.

Draw conventional symbol for: i. Cutting ii. Road with bridge iii. Orchard iv. river

Description : Draw conventional symbol for: i. Cutting ii. Road with bridge iii. Orchard iv. river

Last Answer : conventional symbol for: i. Cutting ii. Road with bridge iii. Orchard iv. river

In a typical mobile phone system with hexagonal cells, it is forbidden to reuse a frequency band in adjacent cells. If 840 frequencies are available, how many can be used in a given cell? (A) 280 (B) 210 (C) 140 (D) 120

Description : In a typical mobile phone system with hexagonal cells, it is forbidden to reuse a frequency band in adjacent cells. If 840 frequencies are available, how many can be used in a given cell? (A) 280 (B) 210 (C) 140 (D) 120

Last Answer : Answer: A Explanation: Each cell has six other adjacent cells, in a hexagonal grid. If the central cell uses frequency group A, its six adjacent cells can use B, C, B, C, B, and C respectively. In other words, only 3 unique cells are needed. So the answer is 840/3 = 280 frequencies.

in hexagonal writing, personal allusions refer to _____. -General Knowledge

Description : in hexagonal writing, personal allusions refer to _____. -General Knowledge

Last Answer : In hexagonal writing, personal allusions refer to a piece of literature brings to mind.

how many faces does hexagonal have?

Description : how many faces does hexagonal have?

Last Answer : None.A hexagon is a plane figure. It has six sides but nofaces.Only three-dimensional (solid) objects have faces; for instance a hexagonal-based prism would have eight faces.

what- Two similar hexagonal swimming pools are shown.What is KJ Round to the nearest tenth?

Description : what- Two similar hexagonal swimming pools are shown.What is KJ Round to the nearest tenth?

Last Answer : 14.4 m

How many sides Hexagonal prism?

Description : How many sides Hexagonal prism?

Last Answer : Need answer

Which of the following crystal structures characterises the austenitic stainless steel? (A) Simple hexagonal (B) Body centred cubic (C) Face centred cubic (D) None of these

Description : Which of the following crystal structures characterises the austenitic stainless steel? (A) Simple hexagonal (B) Body centred cubic (C) Face centred cubic (D) None of these

Last Answer : (C) Face centred cubic

Pick out the wrong statement. (A) Metal/alloys having hexagonal crystal lattice structure are less malleable than those having cubic crystal lattice structure (B) Metal/alloys having body centred cubic (bcc) crystal lattice structure is stronger & less ductile than those having face centred cubic (fcc) crystal lattice structure (C) Tungsten has a body centred cubic (bcc) crystal lattice structure (D) Both ferritic & austenitic stainless steel has a face centred cubic (fcc) crystal structure

Description : Pick out the wrong statement. (A) Metal/alloys having hexagonal crystal lattice structure are less malleable than those having cubic crystal lattice structure (B) Metal/alloys having body centred cubic ... D) Both ferritic & austenitic stainless steel has a face centred cubic (fcc) crystal structure

Last Answer : (C) Tungsten has a body centred cubic (bcc) crystal lattice structure

Which of the following crystal structures characterises the ferritic stainless steel? (A) Face centred cubic (B) Body centred cubic (C) Simple hexagonal (D) None of these

Description : Which of the following crystal structures characterises the ferritic stainless steel? (A) Face centred cubic (B) Body centred cubic (C) Simple hexagonal (D) None of these

Last Answer : (B) Body centred cubic

Most of the common metals have __________ crystal structure. (A) Cubic (B) Hexagonal (C) Orthorhombic (D) None of these

Description : Most of the common metals have __________ crystal structure. (A) Cubic (B) Hexagonal (C) Orthorhombic (D) None of these

Last Answer : (A) Cubic

The crystal structure of most of the common metals is (A) Orthorhombic (B) Cubic (C) Hexagonal (D) None of these

Description : The crystal structure of most of the common metals is (A) Orthorhombic (B) Cubic (C) Hexagonal (D) None of these

Last Answer : (B) Cubic

Fillister, button, flat and hexagonal heads are all tightened externally. a) True b) False

Description : Fillister, button, flat and hexagonal heads are all tightened externally. a) True b) False

Last Answer : b) False

Allen key is used to tighten (A) Cap screw with hexagonal head (B) Cap screw with fillister head (C) Cap screw with hexagonal socket head (D) Cap screw with flat head

Description : Allen key is used to tighten (A) Cap screw with hexagonal head (B) Cap screw with fillister head (C) Cap screw with hexagonal socket head (D) Cap screw with flat head

Last Answer : (C) Cap screw with hexagonal socket head

The shock absorbing capacity of a bolt can be increased by (A) Increasing shank diameter (B) Making shank diameter equal to core diameter of threads (C) Using castle nut in place of ordinary hexagonal nut (D) Using a washer

Description : The shock absorbing capacity of a bolt can be increased by (A) Increasing shank diameter (B) Making shank diameter equal to core diameter of threads (C) Using castle nut in place of ordinary hexagonal nut (D) Using a washer

Last Answer : (B) Making shank diameter equal to core diameter of threads

Out of the following, the lowest packing of atoms exists in __________ crystal lattice structure. (A) Hexagonal close, packed (hcp) (B) Face centred cubic (fcc) (C) Body centred cubic (bcc) (D) Simple cubic

Description : Out of the following, the lowest packing of atoms exists in __________ crystal lattice structure. (A) Hexagonal close, packed (hcp) (B) Face centred cubic (fcc) (C) Body centred cubic (bcc) (D) Simple cubic

Last Answer : (D) Simple cubic

Pick up the incorrect statement from the following: (A) The bottom and top ends of slump mould are parallel to each other (B) The axis of the mould is perpendicular to the end faces (C) The internal surface of the mould is kept clean and free from set cement (D) The mould is in the form of a frustum of hexagonal pyramid

Description : Pick up the incorrect statement from the following: (A) The bottom and top ends of slump mould are parallel to each other (B) The axis of the mould is perpendicular to the end faces (C) The ... clean and free from set cement (D) The mould is in the form of a frustum of hexagonal pyramid

Last Answer : Answer: Option D

Liver cells are (a) Hexagonal (b) Polygonal (c) Triangular (d) Irregular

Description : Liver cells are (a) Hexagonal (b) Polygonal (c) Triangular (d) Irregular

Last Answer : (c) Triangular

Crystals of ice are: w) isometric x) tetragonal y) hexagonal z) orthorombic

Description : Crystals of ice are: w) isometric x) tetragonal y) hexagonal z) orthorombic

Last Answer : ANSWER: Y -- HEXAGONAL

Cubic crystals containing lattice points only at the corners are called: w) body centered x) face centered y) simple z) hexagonal

Description : Cubic crystals containing lattice points only at the corners are called: w) body centered x) face centered y) simple z) hexagonal

Last Answer : ANSWER: C-SIMPLE 

How many neighboring atoms are in contact with each a in a hexagonal close-packed structure?

Description : How many neighboring atoms are in contact with each a in a hexagonal close-packed structure?

Last Answer : ANSWER: 12

The basic underlying principle of using a mist propagation system is that it: a. Keeps the propagation medium uniformly moist and supplies moisture to the base of the cuttings b. Keeps the plant material cool c. Cools the propagation medium to promote root formation and development d. Increases humidity around the cutting and reduces transpiration

Description : The basic underlying principle of using a mist propagation system is that it: a. Keeps the propagation medium uniformly moist and supplies moisture to the base of the cuttings b. ... medium to promote root formation and development d. Increases humidity around the cutting and reduces transpiration

Last Answer : Increases humidity around the cutting and reduces transpiration

The most common summer cooling system in greenhouses is: a. Package evaporative coolers b. Fan-tube cooling system c. Fog evaporative cooling d. Fan-and-pad evaporative cooling

Description : The most common summer cooling system in greenhouses is: a. Package evaporative coolers b. Fan-tube cooling system c. Fog evaporative cooling d. Fan-and-pad evaporative cooling

Last Answer : Fan-and-pad evaporative cooling

Commercial flower crops are sometimes watered to cause leaching. This means: a. Watering to spread fertilizer nutrients more evenly throughout the plant root system b. Watering to remove excess soluble salts from the growing medium c. Watering only to wet the top 1/3 of the growing medium d. Watering by subsurface methods

Description : Commercial flower crops are sometimes watered to cause leaching. This means: a. Watering to spread fertilizer nutrients more evenly throughout the plant root system b. Watering to remove excess soluble salts from ... only to wet the top 1/3 of the growing medium d. Watering by subsurface methods

Last Answer : Watering to remove excess soluble salts from the growing medium

In hydroponic system plants are grown in a. Water b. Soil c. Sand d. Gravels

Description : In hydroponic system plants are grown in a. Water b. Soil c. Sand d. Gravels

Last Answer : Water