A jig is used while __________ a hole. (A) Boring (B) Counter boring (C) Drilling (D) Enlarging

A jig is used while __________ a hole.
(A) Boring
(B) Counter boring
(C) Drilling
(D) Enlarging
by

1 Answer

Answer :

(C) Drilling
by

Related questions

In a CNC program block, N05 GO1 G91 G33 X20 Z-40……, G33 refer to a.Peck Drilling b.Counter Boring c.Thread Cutting d.Grooving

Description : In a CNC program block, N05 GO1 G91 G33 X20 Z-40……, G33 refer to a.Peck Drilling b.Counter Boring c.Thread Cutting d.Grooving

Last Answer : c.Thread Cutting

A solid core of rock is formed inside the cylinder in the case of (A) Auger boring (B) Percussion drilling (C) Diamond drilling (D) Wash boring

Description : A solid core of rock is formed inside the cylinder in the case of (A) Auger boring (B) Percussion drilling (C) Diamond drilling (D) Wash boring

Last Answer : Answer: Option C

Without a drill press, what is a trick for drilling a truly vertical hole in board?

Description : Without a drill press, what is a trick for drilling a truly vertical hole in board?

Last Answer : Stand a bubble level near the place-of-drillage, and rest the dorsal edge of the drill against the long edge of the level. Ask a friend to hold the level, if necessary.

Is drilling a hole in wood a physical change?

Description : Is drilling a hole in wood a physical change?

Last Answer : Yes, it typically is. Both the wood (sawdust) removed and theremaining block are still wood. They have not changed chemically.For that matter, reducing the whole block to sawdust would not makethe wood a different substance, only a different form.

During percussion drilling (A) Ground water observations are hindered due to entry of the slurry in the soil below the bottom of the hole (B) Caving or mixing of strata are caused in soft soils or cohesionless soils (C) The soil to a considerable depth below the bottom of the hole gets disturbed (D) All the above

Description : During percussion drilling (A) Ground water observations are hindered due to entry of the slurry in the soil below the bottom of the hole (B) Caving or mixing of strata are caused in soft soils or ... The soil to a considerable depth below the bottom of the hole gets disturbed (D) All the above

Last Answer : Answer: Option D

Main boring diameter for petroleum well is 20-30 cms in diameter, while the depth of the oil well may be about __________ kms. (A) 0.1 to 0.5 (B) 1.5 to 4.5 (C) 7.5 to 12.5 (D) 15-20

Description : Main boring diameter for petroleum well is 20-30 cms in diameter, while the depth of the oil well may be about __________ kms. (A) 0.1 to 0.5 (B) 1.5 to 4.5 (C) 7.5 to 12.5 (D) 15-20

Last Answer : (B) 1.5 to 4.5

Which of the following is the most suitable for cleaning of fine coal dust (<0.5 mm)? (A) Trough washer (B) Baum jig washer (C) Spiral separator (D) Froth floatation

Description : Which of the following is the most suitable for cleaning of fine coal dust (

Last Answer : (D) Froth floatation

Auger boring (A) Is the most primitive method for making a hole in the ground (B) Is generally employed in cohesive and other self soils above water table (C) Is most economical upto a depth of 5 metres (D) All the above

Description : Auger boring (A) Is the most primitive method for making a hole in the ground (B) Is generally employed in cohesive and other self soils above water table (C) Is most economical upto a depth of 5 metres (D) All the above

Last Answer : Answer: Option D

Powder metallurgy technique is used in the production of __________ tools. (A) Tungsten carbide (B) High carbon steel (C) High speed steel (D) Drilling

Description : Powder metallurgy technique is used in the production of __________ tools. (A) Tungsten carbide (B) High carbon steel (C) High speed steel (D) Drilling

Last Answer : Option A

Are there any hard core, old school bike shops in the Napa area that would have a frame alignment jig and a master tech that knows how to use it?

Description : Are there any hard core, old school bike shops in the Napa area that would have a frame alignment jig and a master tech that knows how to use it?

Last Answer : I haven’t a clue where to get your wheels spun but I must thank you for the laugh of the day, priceless and brilliant writing. Reminds me of a friends hoarder husband whose shelves with 10,000 Nat. Geo mags fell over and dented her car in the garage. hahaha

Will you help me sing the "Jiggy jig song" to celebrate jmah's 10K?

Description : Will you help me sing the "Jiggy jig song" to celebrate jmah's 10K?

Last Answer : Congrats~ We love you more than you know and are so lucky to have you here.

How can I build a jig to remove an accoustic quitar neck?

Description : How can I build a jig to remove an accoustic quitar neck?

Last Answer : Need Answer

Is there a difference between a jig saw and a saber saw?

Description : Is there a difference between a jig saw and a saber saw?

Last Answer : There really isn't one,but jigsaws are generally used for more detailed work.Saber saws usually have slightly larger blades.It's mostly a matter of semantics.

How to Build a Motorcycle Jig

Description : How to Build a Motorcycle Jig

Last Answer : How to Build a Motorcycle Jig If you would like to build a motorcycle frame, one of the most effective ways to do so is to first build a motorcycle jig. A motorcycle jig holds the parts of ... and plans on the web, even created especially for the style of motorcycle frame you would like to build.

Draw proportionate sketch of template jig. State its use.

Description : Draw proportionate sketch of template jig. State its use.

Last Answer : Use of Template jig:- 1) This jig avoids the marking operation completely 2) Drilling is done quickly 3) Easy and Fast loading and unloading of work pieces 4) For drilling flat work pieces they can be accommodated in this jig Sketch :-

Enlist general principle of jig and fixture design.

Description : Enlist general principle of jig and fixture design.

Last Answer : General principle of jig and fixture design. 1. The jig and fixture should be as open as possible to minimize chip or burr accumulation and to enable the operator to remove the chips easily with a ... . Inserts 9. Design for safety 10. Sighting surfaces 11. Simplicity in Design 12. Economical 

Differentiate in between Jig and fixture.

Description : Differentiate in between Jig and fixture.

Last Answer : Difference between jig and fixture. 

Have you had a slowly enlarging goiter and, if so, how was it treated?

Description : Have you had a slowly enlarging goiter and, if so, how was it treated?

Last Answer : It depends on what caused it but they can be shrunk.

I was doing some private experiments with the Large Hadron Collider in my spare time and accidentally created a singularity. Now it's getting bigger. What are the specific dangers of an enlarging singularity?

Description : I was doing some private experiments with the Large Hadron Collider in my spare time and accidentally created a singularity. Now it's getting bigger. What are the specific dangers of an enlarging singularity?

Last Answer : lol nahhhhh its just a hole.

Enlarging system fonts?

Description : Enlarging system fonts?

Last Answer : I don't know if this would help any Click on the View' menu with the mouse. Hover your mouse over Text Zoom' and choose a different text size from the listed options. Or to use keyboard ... Enter' to return to Internet Explorer. Maybe not sorry Tinkertool is from what i can find the way forth

At the epiphyseal plate, which zone is characterized by older cartilage cells that are enlarging?

Description : At the epiphyseal plate, which zone is characterized by older cartilage cells that are enlarging?

Last Answer : a) proliferation zone b) calcification zone c) ossification zone d) hypertrophic zon

Minimizing a window means to: a) Bring it down to the minimum possible size b) Open a new window c) Enlarging a window to fit the screen d) None of The Above

Description : Minimizing a window means to: a) Bring it down to the minimum possible size b) Open a new window c) Enlarging a window to fit the screen d) None of The Above

Last Answer : a) Bring it down to the minimum possible size

From the point of view of international business, an organization that enjoys competitive advantage in an industry has done so by: A. Focusing on long-term profit. B. Charging lower prices than competition. C. Creating superior value for customers. D. Constantly enlarging its marketing activities.

Description : From the point of view of international business, an organization that enjoys competitive advantage in an industry has done so by: A. Focusing on long-term profit. B. Charging lower prices than competition. C. Creating superior value for customers. D. Constantly enlarging its marketing activities.

Last Answer : Creating superior value for customers.

Pantograph is used for (A) Measuring distances (B) Measuring areas (C) Enlarging or reducing plans

Description : Pantograph is used for  (A) Measuring distances  (B) Measuring areas  (C) Enlarging or reducing plans 

Last Answer : (C) Enlarging or reducing plans 

Which one of the following satisfactions helps our children from infancy onwards to adolescence, equipped them with a sense of achievement, recognition and independence (a) Affectionate, warm, security giving satisfactions (b) Self-enlarging, ego-building adequacy giving satisfactions (c) They gain satisfaction and love through close physical contact (d) None of the above

Description : Which one of the following satisfactions helps our children from infancy onwards to adolescence, equipped them with a sense of achievement, recognition and independence (a) Affectionate, warm, security ... ) They gain satisfaction and love through close physical contact (d) None of the above

Last Answer : (a) Affectionate, warm, security giving satisfactions

.......................... models are obtained by enlarging or reducing the size of the items. a. Iconic models b. Analogue models c. Symbolic models d. None of these

Description : .......................... models are obtained by enlarging or reducing the size of the items. a. Iconic models b. Analogue models c. Symbolic models d. None of these

Last Answer : a. Iconic models

Which one of the following satisfactions helps our children from infancy onwards to adolescence, equipped them with a sense of achievement, recognition and independence? Options: A) Affectionate, warm, security giving satisfaction. B) Self enlarging, ego building, adequacy giving satisfactions. C) They gain satisfaction and love through close physical contact D) None of these

Description : Which one of the following satisfactions helps our children from infancy onwards to adolescence, equipped them with a sense of achievement, recognition and independence? Options: A) Affectionate, warm, ... . C) They gain satisfaction and love through close physical contact D) None of these

Last Answer : A) Affectionate, warm, security giving satisfaction. 

In a counter flow heat exchanger, hot fluid enters at 170°C & leaves at 150°C, while the cold fluid enters at 50°C & leaves at 70°C. The arithmetic mean temperature difference in this case is __________ °C. (A) 20 (B) 60 (C) 120 (D) ∞

Description : In a counter flow heat exchanger, hot fluid enters at 170°C & leaves at 150°C, while the cold fluid enters at 50°C & leaves at 70°C. The arithmetic mean temperature difference in this case is __________ °C. (A) 20 (B) 60 (C) 120 (D) ∞

Last Answer : (D) ∞

What interesting things can I do to pass time, while on a boring conference call?

Description : What interesting things can I do to pass time, while on a boring conference call?

Last Answer : Compose a letter to a friend.

Inhalation of silica dust by human being during hand drilling in mica mining, lead & zinc mining, silica refractory manufacture and in foundries causes (A) Asphyxiation (suffocation) (B) Shortness of breath (C) Tuberculosis (D) All (A), (B) and (C)

Description : Inhalation of silica dust by human being during hand drilling in mica mining, lead & zinc mining, silica refractory manufacture and in foundries causes (A) Asphyxiation (suffocation) (B) Shortness of breath (C) Tuberculosis (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The main use of HCl is in the (A) Drilling of petroleum wells and pickling of steel sheets (B) Manufacture of cationic detergent (C) Treatment of spent fuel of nuclear reactor (D) None of these

Description : The main use of HCl is in the (A) Drilling of petroleum wells and pickling of steel sheets (B) Manufacture of cationic detergent (C) Treatment of spent fuel of nuclear reactor (D) None of these

Last Answer : (A) Drilling of petroleum wells and pickling of steel sheets

Holes for riveting purposes should be preferably made by (A) Cutting torch (B) Drilling (C) Punching (D) None of these

Description : Holes for riveting purposes should be preferably made by (A) Cutting torch (B) Drilling (C) Punching (D) None of these

Last Answer : (B) Drilling

In a drilling process, the metal is removed by both shearing & extrusion. General purpose drills are made of (A) Stainless steel (B) Mild steel (C) High speed steel (D) High carbon steel

Description : In a drilling process, the metal is removed by both shearing & extrusion. General purpose drills are made of (A) Stainless steel (B) Mild steel (C) High speed steel (D) High carbon steel

Last Answer : (C) High speed steel

The mechanism involved in the removal of metal in drilling operation is by (A) Compression (B) Extrusion (C) Shearing (D) Both 'b' & 'c'

Description : The mechanism involved in the removal of metal in drilling operation is by (A) Compression (B) Extrusion (C) Shearing (D) Both 'b' & 'c'

Last Answer : (D) Both 'b' & 'c'

Binary distillation involves the mass transfer by __________ at the gas￾liquid interface. (A) Unidirectional diffusion from liquid to gas phase (B) Unidirectional diffusion from gas to liquid phase (C) Either 'a' or 'b' (D) A counter diffusion at an almost equal molar rate

Description : Binary distillation involves the mass transfer by __________ at the gas￾liquid interface. (A) Unidirectional diffusion from liquid to gas phase (B) Unidirectional diffusion from gas to liquid phase (C) Either 'a' or 'b' (D) A counter diffusion at an almost equal molar rate

Last Answer : (D) A counter diffusion at an almost equal molar rate

Correction is applied to LMTD for __________ flow. (A) Parallel (B) Counter (C) Cross (D) None of these

Description : Correction is applied to LMTD for __________ flow. (A) Parallel (B) Counter (C) Cross (D) None of these

Last Answer : (C) Cross

Radiator of an automobile engine is a __________ type of heat exchanger. (A) Co-current (B) Cross-current (C) Counter-current (D) Direct contact

Description : Radiator of an automobile engine is a __________ type of heat exchanger. (A) Co-current (B) Cross-current (C) Counter-current (D) Direct contact

Last Answer : (D) Direct contact

Maximum heat transfer rate is achieved in __________ flow. (A) Co-current (B) Counter-current (C) Turbulent (D) Laminar

Description : Maximum heat transfer rate is achieved in __________ flow. (A) Co-current (B) Counter-current (C) Turbulent (D) Laminar

Last Answer : (C) Turbulen

LMTD for evaporators & condensers for a given terminal parameters & set of conditions for counter-flow is equal to that for parallel flow. In such heat exchangers, with one of the fluids condensing or evaporating, the surface area required is the least in the __________ flow. (A) Parallel (B) Mixed (C) Counter flow (D) Same in either 'a', b' or 'c'

Description : LMTD for evaporators & condensers for a given terminal parameters & set of conditions for counter-flow is equal to that for parallel flow. In such heat exchangers, with one of the fluids condensing or evaporating, the surface ... Parallel (B) Mixed (C) Counter flow (D) Same in either 'a', b' or 'c'

Last Answer : (D) Same in either 'a', b' or 'c'

Is there anything besides drilling that can be done for a very shallow surface cavity?

Description : Is there anything besides drilling that can be done for a very shallow surface cavity?

Last Answer : Long run PULL it! Get over the drilling, it will only get deeper. get it fixed! Maybe a laser drilling instead. or get Nitrous Oxide.

Your thoughts on offshore oil drilling,now that there is a oil spill in the Gulf of Mexico?

Description : Your thoughts on offshore oil drilling,now that there is a oil spill in the Gulf of Mexico?

Last Answer : answer:My stance on Spilled oil in our oceans is bad has remained unchanged. I also think we can drill in the oceans and still take reasonable precautions to see that these sorts of things don't happen ... make efforts to clean up our messes. That last part is where the US has a bad track record.

Do you think we should expand oil drilling in the United States?

Description : Do you think we should expand oil drilling in the United States?

Last Answer : We already do. We produce lots of natural gas and plenty of crude oil.

In cell formation using production flow analysis, the following process will be left out of theanalysis a.Grinding b.Milling c.Drilling d.Gear cutting

Description : In cell formation using production flow analysis, the following process will be left out of theanalysis a.Grinding b.Milling c.Drilling d.Gear cutting

Last Answer : d.Gear cutting

Drilling, milling and threading are examples of which kind of processes? a.Additive manufacturing b.Subtractive manufacturing c.Formative manufacturing d.None of the above

Description : Drilling, milling and threading are examples of which kind of processes? a.Additive manufacturing b.Subtractive manufacturing c.Formative manufacturing d.None of the above

Last Answer : b.Subtractive manufacturing

What is drilling perfectly, round holes in my tree, they tend to run in a line and the bark is turning black in color

Description : What is drilling perfectly, round holes in my tree, they tend to run in a line and the bark is turning black in color

Last Answer : Bees, boring bees. They boor holes, perfectly round holes into wood.

Explain the following terms : (i) Withering (ii) Plantation Farming (iii) Drilling -Geography

Description : Explain the following terms : (i) Withering (ii) Plantation Farming (iii) Drilling -Geography

Last Answer : (i) Withering: It is involved in the process of making black tea. The tea leaves are spread over shelves called withering racks and air is blown over the leaves to reduce their moisture ... method of sowing seeds at regular interval through a bamboo shaft attached to the plough which make furrows.

What is ‘off-shore drilling’? -SST 10th

Description : What is ‘off-shore drilling’? -SST 10th

Last Answer : The Oil and Natural Gas Commission of India since 1956, has started oil exploration in the off-shore areas which is known as off-shore drilling. In 1973, it has begun drilling for oil in the deep waters off the western coast of Mumbai which is known as Mumbai High.

Name any two important petroleum drilling centres for each of these states: -SST 10th

Description : Name any two important petroleum drilling centres for each of these states: -SST 10th

Last Answer : (i) Ankaleshwar and Kalol (ii) Digboi and Moran.

What is drilling method of cultivation? -SST 10th

Description : What is drilling method of cultivation? -SST 10th

Last Answer : In the drilling method, the seeds are dropped in furrows through a bamboo-shaft attached to the plough.

Which was India’s first mobile offshore drilling platform? -Do You Know?

Description : Which was India’s first mobile offshore drilling platform? -Do You Know?

Last Answer : answer: