Name any two important petroleum drilling centres for each of these states: -SST 10th

Name any two important petroleum drilling centres for each of these states: -SST 10th
by

1 Answer

Answer :

(i) Ankaleshwar and Kalol (ii) Digboi and Moran.
by

Related questions

The main use of HCl is in the (A) Drilling of petroleum wells and pickling of steel sheets (B) Manufacture of cationic detergent (C) Treatment of spent fuel of nuclear reactor (D) None of these

Description : The main use of HCl is in the (A) Drilling of petroleum wells and pickling of steel sheets (B) Manufacture of cationic detergent (C) Treatment of spent fuel of nuclear reactor (D) None of these

Last Answer : (A) Drilling of petroleum wells and pickling of steel sheets

Assuming everything else equal, the best way for British Petroleum to transport crude oil from remote oil drilling sites in central Alaska to shipping terminals on the Alaskan coast would be A)waterways. B)airways. C)tanker trucks. D)railroads. E)pipelines.

Description : Assuming everything else equal, the best way for British Petroleum to transport crude oil from remote oil drilling sites in central Alaska to shipping terminals on the Alaskan coast would be A)waterways. B)airways. C)tanker trucks. D)railroads. E)pipelines.

Last Answer : E)pipelines.

Name the states producing sugar and name the chief centres in each state. -SST 10th

Description : Name the states producing sugar and name the chief centres in each state. -SST 10th

Last Answer : State Chief Centres of Sugar Industry Uttar Pradesh Gorakhpur, Saharanpur, Lucknow, Kanpur, Sitapur, Allahabad, Bareilly. Bihar Muzaffarpur, Monger, Darbhanga. Maharashtra Manmad, Sholapur, Nasik, ... , Madurai, Tiruchirapalli. West Bengal Murshidabad, 24-Pargana Madia. Punjab Amritsar, Phagwara.

District Industries Centres are located ____________. A. in each district. B. in each state. C. only in selected districts. D. only in selected states.

Description : District Industries Centres are located ____________. A. in each district. B. in each state. C. only in selected districts. D. only in selected states.

Last Answer : A. in each district.

Name any two centres of the following states which are famous for silk industry: -SST 10th

Description : Name any two centres of the following states which are famous for silk industry: -SST 10th

Last Answer : (i) Varanasi, Mirzapur (ii) Bhagalpur (iii) Ranchi. (iv) Murshidabad, Bishnupur.

Do you think we should expand oil drilling in the United States?

Description : Do you think we should expand oil drilling in the United States?

Last Answer : We already do. We produce lots of natural gas and plenty of crude oil.

Name two important silk-weaving centres in Karnataka. -SST 10th

Description : Name two important silk-weaving centres in Karnataka. -SST 10th

Last Answer : Bangalore and Mysore are two important silk weaving centres in Karnataka.

Name some important iron-ore producing centres in India. -SST 10th

Description : Name some important iron-ore producing centres in India. -SST 10th

Last Answer : Some important iron-ore producing centres in India are: (i) Bastar, Balaghat, Durg and Rajhara districts in Madhya Pradesh. (ii) Mayurbhanj, Keonjhar and Bonai in Orissa. (iii) Singhbhum in ... and Ratnagiri in Maharashtra. (viii) Warangal and Kurnool in Andhra Pradesh. (ix) Kozikode in Kerala.

Name some important centres of the cotton industry in Maharashtra, -SST 10th

Description : Name some important centres of the cotton industry in Maharashtra, -SST 10th

Last Answer : Maharashtra : Mumbai, Sholapur, Pune, Nagpur, Akola Uttar Pradesh : Kanpur Punjab : Phagwara Haryana : Hisar Gujarat : Surat, Ahmedabad, Vadodara Tamil Nadu : Coimbatore, Salem, Madurai.

Coherence of laser light is important for _________ ∙ a. Light propagation ∙ b. Getting laser light to pass through air ∙ c. Drilling holes ∙ d. Holography

Description : Coherence of laser light is important for _________ ∙ a. Light propagation ∙ b. Getting laser light to pass through air ∙ c. Drilling holes ∙ d. Holography

Last Answer : d. Holography

Which of the following reduces the stress concentration? a) Use of multiple notches b) Drilling additional holes c) Removal of undesired material d) Each of the mentioned

Description : Which of the following reduces the stress concentration? a) Use of multiple notches b) Drilling additional holes c) Removal of undesired material d) Each of the mentioned

Last Answer : d) Each of the mentioned

Name two important silk-waving centres in Karnataka. -Geography

Description : Name two important silk-waving centres in Karnataka. -Geography

Last Answer : Two important silk weaving centres in Karnataka are : (i) Bangalore, (ii) Mysore.

How has enlargement of urban centres and emergence of new towns played an important role -Geography

Description : How has enlargement of urban centres and emergence of new towns played an important role -Geography

Last Answer : (i) Urbanisation refers to development of villages and rural areas into towns with high standard of living and civic amenities. (ii) The level of urbanisation is measured in terms of percentage ... mega cities. Greater Mumbai, Kolkata, Delhi, Chennai, Bengaluru and Hyderabad are the mega cities.

What are the important centres of bauxite deposits in India? -Geography

Description : What are the important centres of bauxite deposits in India? -Geography

Last Answer : Bauxite is an important mineral as aluminium; an important metal in many industries. India's bauxite deposits are mainly distributed between the states of Madhya Pradesh and Chattisgarh. The main ... Chattisgarh), and the plateau region of Bilaspur - Katni (between Madhya Pradesh and Chattisgarh).

Name the important centres of electronic industry in India. -Geography

Description : Name the important centres of electronic industry in India. -Geography

Last Answer : Electronic Industry is an important industry that covers a wide range of products including TV, Telephones, cellular Telecom, Computers, etc. India has emerged globally in this sector. Bengaluru has ... itself in this sector. They are Mumbai, Delhi, Kolkata, Pune, Chennai, Lucknow, Coimbatore.

Name two centres each in Chhattisgarh where the following are mined : -Geography

Description : Name two centres each in Chhattisgarh where the following are mined : -Geography

Last Answer : Two centres each in Chhattisgarh where the following mined are : (i) Iron Ore: Bailadila in Bastar district and Dali Rajhara in Durg district. (ii) Bauxite: Surguja & Raigarh.

With reference to mining in Chhattisgarh, name two minerals each mined from the following centres : -Geography

Description : With reference to mining in Chhattisgarh, name two minerals each mined from the following centres : -Geography

Last Answer : The two minerals mined from the following centers: 1. Surguja District: coal and bauxite. 2. Bastar and Durg Districts: iron ore and limestone.

Three circles of radius a, b, c touch each other externally. The area of the triangle formed by joining their centres is: -Maths 9th

Description : Three circles of radius a, b, c touch each other externally. The area of the triangle formed by joining their centres is: -Maths 9th

Last Answer : (a) \(\sqrt{(a+b+c).a.b.c}\)As shown in the figure, AB = a + b, BC = b + c, CA = a + c∴ Area of ΔABC = \(\sqrt{s(s-AB)(s-BC)(s-CA)}\)where, s = \(rac{1}{2}\) (AB + BC + CA)= \(rac{a+b+b+c+c+a}{2}\) = a + b + ... (\sqrt{(a+b+c)[(a+b+c)-(a+b)][(a+b+c)-(b+c)][(a+b+c)-(c+a)]}\)= \(\sqrt{(a+b+c).a.b.c}\)

What is ‘off-shore drilling’? -SST 10th

Description : What is ‘off-shore drilling’? -SST 10th

Last Answer : The Oil and Natural Gas Commission of India since 1956, has started oil exploration in the off-shore areas which is known as off-shore drilling. In 1973, it has begun drilling for oil in the deep waters off the western coast of Mumbai which is known as Mumbai High.

What is drilling method of cultivation? -SST 10th

Description : What is drilling method of cultivation? -SST 10th

Last Answer : In the drilling method, the seeds are dropped in furrows through a bamboo-shaft attached to the plough.

How is petroleum an important source of both energy and raw material? -SST 10th

Description : How is petroleum an important source of both energy and raw material? -SST 10th

Last Answer : Petroleum or mineral oil is a major energy source in India. It provides fuel for heating and lighting. It is used as a fuel for running automobiles, trains, aeroplanes and ships. Petroleum ... Oil has also been discovered in Kaveri, Krishna and Godavari basins and at Jwalamukhi in Himachal Pradesh.

Mention any two factors that have contributed to a healthy growth of the automobile industry in India ? Name two centres where this industry is located. -SST 10th

Description : Mention any two factors that have contributed to a healthy growth of the automobile industry in India ? Name two centres where this industry is located. -SST 10th

Last Answer : (i) The introduction of new and comtemporary models stimulated the demand for vehicles in the market. (ii) Foreign Direct Investment (FDI) brought in new technology and aligned the industry with global developments. The two centres of automobile industry are Jamshedpur and Gurgaon.

Name any two major centres of electronic products. -SST 10th

Description : Name any two major centres of electronic products. -SST 10th

Last Answer : Mumbai, Kolkata: (Entertainment) TV, BPL, Videocon, Onida, Philips, CD based system, Car audio system etc.

Name any four major centres of cotton textile of India during the colonial period. -SST 10th

Description : Name any four major centres of cotton textile of India during the colonial period. -SST 10th

Last Answer : (i) Bombay - 1854 (ii) Kanpur - I860 (iii) Ahmedabad - 1861 (iv) Madras - 1874

How can employment opportunities be generated in the tourism and information and technology centres ? -SST 10th

Description : How can employment opportunities be generated in the tourism and information and technology centres ? -SST 10th

Last Answer : (i) Government should encourage tourism by providing more facilities to the tourists. (ii) Medical treatment in India is very cheap as compared to developed nations. (iii) Vocational training ... Research and development work should be promoted. (v) Government should set up more technology parks.

On an outline map of India locate and label, name the following textile centres : -SST 10th

Description : On an outline map of India locate and label, name the following textile centres : -SST 10th

Last Answer : Outline map of India

Name the centres of the woollen industry in Kashmir -SST 10th

Description : Name the centres of the woollen industry in Kashmir -SST 10th

Last Answer : (i) Kashmir : Srinagr (ii) Punjab : Amritsar, Dhariwal, Ludhiana. (iii) Rajasthan : Jaipur, Bikaner. (iv) Uttar Pradesh : Agra, Kanpur, Mirzapur. (v) Madya Pradesh : Gwalior.

Where are the main manufacturing centres of Electronic Industry. -SST 10th

Description : Where are the main manufacturing centres of Electronic Industry. -SST 10th

Last Answer : They are at Mumbai, Kolkata, Delhi, Bangalore, Hyderabad and Pune.

Which are the leading centres of software Industry. -SST 10th

Description : Which are the leading centres of software Industry. -SST 10th

Last Answer : They are Bangalore and Hyderabad.

What industrial product are the following centres noted for? -SST 10th

Description : What industrial product are the following centres noted for? -SST 10th

Last Answer : Industrial products are: (i) Gurgaon—Maruti car (ii) Perambur—The Integral coach factory (iii) Chittaranjan—Chittaranjan locomotive works.

Name some iron and Steel plants centres. -SST 10th

Description : Name some iron and Steel plants centres. -SST 10th

Last Answer : Some centres of Iron and Steel plants are at Jamshedpur, Bhadravati, Rourkela, Bokaro and at Neyveli in South.

Name the four centres of iron and Steel in the public sector which are located in a single geographical region. -SST 10th

Description : Name the four centres of iron and Steel in the public sector which are located in a single geographical region. -SST 10th

Last Answer : Bhilai: Russia. Rourkela: Germany. Durgapur: U.K. Bokaro: Russia.

Without a drill press, what is a trick for drilling a truly vertical hole in board?

Description : Without a drill press, what is a trick for drilling a truly vertical hole in board?

Last Answer : Stand a bubble level near the place-of-drillage, and rest the dorsal edge of the drill against the long edge of the level. Ask a friend to hold the level, if necessary.

Is there anything besides drilling that can be done for a very shallow surface cavity?

Description : Is there anything besides drilling that can be done for a very shallow surface cavity?

Last Answer : Long run PULL it! Get over the drilling, it will only get deeper. get it fixed! Maybe a laser drilling instead. or get Nitrous Oxide.

Your thoughts on offshore oil drilling,now that there is a oil spill in the Gulf of Mexico?

Description : Your thoughts on offshore oil drilling,now that there is a oil spill in the Gulf of Mexico?

Last Answer : answer:My stance on Spilled oil in our oceans is bad has remained unchanged. I also think we can drill in the oceans and still take reasonable precautions to see that these sorts of things don't happen ... make efforts to clean up our messes. That last part is where the US has a bad track record.

In cell formation using production flow analysis, the following process will be left out of theanalysis a.Grinding b.Milling c.Drilling d.Gear cutting

Description : In cell formation using production flow analysis, the following process will be left out of theanalysis a.Grinding b.Milling c.Drilling d.Gear cutting

Last Answer : d.Gear cutting

Drilling, milling and threading are examples of which kind of processes? a.Additive manufacturing b.Subtractive manufacturing c.Formative manufacturing d.None of the above

Description : Drilling, milling and threading are examples of which kind of processes? a.Additive manufacturing b.Subtractive manufacturing c.Formative manufacturing d.None of the above

Last Answer : b.Subtractive manufacturing

In a CNC program block, N05 GO1 G91 G33 X20 Z-40……, G33 refer to a.Peck Drilling b.Counter Boring c.Thread Cutting d.Grooving

Description : In a CNC program block, N05 GO1 G91 G33 X20 Z-40……, G33 refer to a.Peck Drilling b.Counter Boring c.Thread Cutting d.Grooving

Last Answer : c.Thread Cutting

What is drilling perfectly, round holes in my tree, they tend to run in a line and the bark is turning black in color

Description : What is drilling perfectly, round holes in my tree, they tend to run in a line and the bark is turning black in color

Last Answer : Bees, boring bees. They boor holes, perfectly round holes into wood.

Explain the following terms : (i) Withering (ii) Plantation Farming (iii) Drilling -Geography

Description : Explain the following terms : (i) Withering (ii) Plantation Farming (iii) Drilling -Geography

Last Answer : (i) Withering: It is involved in the process of making black tea. The tea leaves are spread over shelves called withering racks and air is blown over the leaves to reduce their moisture ... method of sowing seeds at regular interval through a bamboo shaft attached to the plough which make furrows.

Which was India’s first mobile offshore drilling platform? -Do You Know?

Description : Which was India’s first mobile offshore drilling platform? -Do You Know?

Last Answer : answer:

Drilling into wood, cooling?

Description : Is it good to use cooling for large wood drilling?

Last Answer : I've never cooled here, it just takes less speed on the drill

What speed to choose when drilling

Description : If I have a small 5 mm iron drill bit, should I give high or low speed? I'll cool with oil. How is it? The smaller the drill the .... the speed? Thanks ZDEMDA

Last Answer : I would say that steel is more suitable at a diameter of 5 mm, a speed of 1600 revolutions and, as a rule, the larger the diameter of the drill, the lower the speed.

Cooling during drilling

Description : I need to drill iron strips on the fence. How do I cool the drill? Should I mix water with oil?

Last Answer : Cool it only with oil, I use fine machine oil (konkor), but you can use any low-viscosity (´sweet´), even cooking oil from the kitchen. : o It is also possible in an emergency with water - the disadvantage is that it corrodes the drilled material - but mainly the drill.

Drilling into the glass.

Description : I need to drill a terrarium. Glass thickness 5 mm and I would drill a hole 7 mm. Would it work somehow? Or is it bullshit?

Last Answer : There are special triangular drills for glass, it should be drilled with cooling.

Is drilling a hole in wood a physical change?

Description : Is drilling a hole in wood a physical change?

Last Answer : Yes, it typically is. Both the wood (sawdust) removed and theremaining block are still wood. They have not changed chemically.For that matter, reducing the whole block to sawdust would not makethe wood a different substance, only a different form.

'Sagar Samrat' is (a) an oil drilling platform in Mumbai High (b) an island in Indian Ocean (c) a ship used for Antarctica expedition (d) a space craft

Description : 'Sagar Samrat' is (a) an oil drilling platform in Mumbai High (b) an island in Indian Ocean (c) a ship used for Antarctica expedition (d) a space craft

Last Answer : Ans: (a)

Which allotrope of the carbon is used in cutting and drilling?

Description : Which allotrope of the carbon is used in cutting and drilling?

Last Answer : Diamond

Flywheel is used in (A) Punch press (B) Drilling machine (C) Surface grinder (D) Milling machine

Description : Flywheel is used in (A) Punch press (B) Drilling machine (C) Surface grinder (D) Milling machine

Last Answer : (A) Punch press

Welded joints require a. Punching of holes b. Drilling of holes c. Punching & Drilling of holes d. None

Description : Welded joints require a. Punching of holes b. Drilling of holes c. Punching & Drilling of holes d. None

Last Answer : d. None