Description : In the Contact process of sulphuric acid manufacture, 98% acid cooler is made of (A) Stainless steel (B) Cast iron (C) Lead lined steel (D) Rubber lined steel
Last Answer : (B) Cast iron
Description : For handling sulphuric acid of 95% strength, the suitable material of construction for pipes is (A) Stainless steel (B) Cast iron (C) Aluminium (D) Nickel
Description : Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber ... Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel
Last Answer : (A) High silicon iron, silicon rubber, Kel-F and Teflon
Description : Acetaldehyde is produced by hydration of acetylene in a sulphuric acid solution of mercuric sulphate. Hydration tower is made of (A) Rubber lined mild steel (B) Lead lined mild steel (C) Aluminium (D) Cast iron
Last Answer : (A) Rubber lined mild steel
Description : A suitable material of construction to use with fuming sulphuric acid is (A) Carbon steel (B) Stainless steel type 304 (C) Nickel (D) Monel
Last Answer : (D) Monel
Description : The material of construction of pressure mills used for squeezing out the juice from sugar cane is (A) Stainless steel (B) Cast iron (C) Mild steel (D) Monel
Description : __________ is used as a material of construction for the blade of power saw. (A) Wrought iron (B) Stainless steel (C) Mild steel (D) High speed steel
Last Answer : Option D
Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin
Last Answer : (D) Brass, cast iron, mild steel and tin
Description : Mild steel storage vessels are suitable for the storage of (A) Anhydrous ammonia (B) Fatty acids (C) Hydrochloric acid (95%) (D) Sulphuric acid (25%)
Last Answer : (A) Anhydrous ammonia
Description : Dilute sulphuric acid is transported in __________ pipes. (A) Mild steel (B) Lead (C) Copper (D) Special alloys
Last Answer : (B) Lead
Description : Sulphur melting pit in the sulphuric acid plant is made of (A) Lead lined stainless steel (B) Cast iron (C) Steel or cement-brick lined (D) Hard wood
Last Answer : (C) Steel or cement-brick lined
Description : Which of the following is the most suitable material of construction for the condenser tubes, where the cooling medium is brine (salty water)? (A) Aluminium (B) Copper (C) Titanium (D) Stainless steel
Last Answer : Option C
Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware
Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin
Description : 100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain
Last Answer : (C) Aluminium, tin and rubber
Description : Sulphuric acid pickling tanks are lined with (A) Nickel (B) Rubber (C) Aluminium (D) Glass
Last Answer : (B) Rubber
Description : Most common stainless steel type 316, which is highly resistant to corrosion contains (A) 16-13% Cr 10-14% Ni and 2-3% Mo (B) 20-22% Cr, and 8-10% Ni (C) 2-4% Cr, 22% NI and 2-4% Mo (D) None of these
Last Answer : (A) 16-13% Cr 10-14% Ni and 2-3% Mo
Description : Which of the following is the cheapest material of construction for the storage of sodium hydroxide upto a concentration of 75%? (A) Stainless steel (B) Plain carbon steel (C) Nickel (D) Copper
Last Answer : (B) Plain carbon steel
Description : Material of construction of pipe generally used for conveying water in India is (A) Stainless steel (B) Cast iron (C) Wrought iron (D) Lead lined steel
Description : Material of construction of foundry crucible is (A) Lead (B) Stainless steel (C) Graphite
Description : Pick out the wrong statement. (A) Conversion of SO2 to SO3 in Monsanto-4 pass converter is about 98% (B) The chemical formula of oleum is H2S2O7 , which is formed by saturating ... but technical sulphuric acid (D) Decomposition of sulphuric acid on heating does not start before its boiling
Last Answer : (D) Decomposition of sulphuric acid on heating does not start before its boiling
Description : Pick out the wrong statement. (A) Chamber process of sulphuric acid manufacture produces pure acid of concentration < 80% (B) Contact process of sulphuric acid manufacture produces pure acid of ... of 20% oleum (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst
Last Answer : (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst
Description : Most suitable material for high pressure vessel operating at 500 atm. and 500° C is (A) Molybdenum stainless steel (B) 18/8 stainless steel (C) Mild steel (D) High silicon iron (14% Si)
Last Answer : (A) Molybdenum stainless steel
Description : Which of the following would not be a suitable material of construction for handling aqueous hydrofluoric acid (HF) at 100°C? (A) Monel (B) Stainless steel (C) Graphite (D) Kel-F and Teflon
Last Answer : (B) Stainless steel
Description : Which of the following has the highest density and the lowest melting point? (A) Stainless steel (B) Titanium (C) Lead (D) Aluminium
Last Answer : (C) Lead
Description : Spray dryer for evaporating milk to produce milk powder is made of (A) Lead lined steel (B) Stainless steel (C) Aluminium (D) Cast iron
Description : Stainless steel is not corroded by (A) Hydrochloric acid (10%) (B) Nitric acid (10%) (C) Sulphuric acid (10%) (D) Saturated brine
Last Answer : (B) Nitric acid (10%)
Description : Hydrochloric acid absorber in made of (A) Cast iron (B) Mild steel (C) Karbate (D) Stainless steel
Last Answer : (C) Karbate
Description : Most suitable material of construction for the storage of concentrated nitric acid is (A) Cast iron (B) Monel (C) Karbate (D) Aluminium or chromium alloys (Cr > 18% for cold acid)
Last Answer : (D) Aluminium or chromium alloys (Cr > 18% for cold acid)
Description : The best material for the core of a transformer is – (1) stainless steel (2) mild steel (3) hard steel (4) soft iron
Last Answer : (4) soft iron Explanation: Iron has a very large magnetic response: it greatly amplifies an applied magnetic field. The transformer's ability to transfer energy depends on the strength of the magnetic ... field is amplified. The input energy can then be lower while still having the same effect.
Description : The best material for the core of a transformer is (1) stainless steel (2) mild steel (3) hard steel (4) soft iron
Last Answer : soft iron
Description : Specify the material of construction suitable for handling concentrated HNO3 at 100°C. (A) High silicon iron, Kel-F and Teflon (B) Tin and wood (C) Silicone rubber (D) Stainless steel
Last Answer : (A) High silicon iron, Kel-F and Teflon
Description : Material of construction of the electrode used in the electric resistance welding is (A) Stainless steel (B) Graphite (C) Copper (D) Steel
Description : Neutraliser tank used for reacting nitric acid with ammonia for the production of ammonium nitrate is made of (A) Aluminium (B) Stainless steel (C) High silicon (14%) iron (D) Copper
Description : Plate and frame filter press is usually made of (A) Mild steel (B) Cast iron (C) Stainless steel (D) Galvanised iron
Description : Tank furnace used for melting of glass is made of (A) Mild steel (B) Cast iron (C) Refractory blocks (D) Stainless steel
Last Answer : (C) Refractory blocks
Description : The digester of a Gobar gas plant is a (A) Mild steel drum (B) Stainless steel vessel (C) Masonry well (D) Cast iron vessel
Last Answer : (C) Masonry well
Description : Mild steel is (A) A low carbon steel (0.05 to 0.3% carbon) (B) Highly resistant to corrosion (as much as stainless steel) (C) A high carbon steel (0.5 to 1.5% carbon) (D) Very poor in strength & ductility
Last Answer : (A) A low carbon steel (0.05 to 0.3% carbon)
Description : Dies for wire drawing are generally made of (A) Mild steel (B) Stainless steel (C) Carbides (D) High carbon stee
Last Answer : (C) Carbides
Description : The 'bomb' in the bomb calorimeter is made of (A) Molybdenum stainless steel (B) Mild steel (C) High silicon iron (14% Si) (D) Copper
Description : Gas holder of a gobar (cow-dung) gas plant is made of (A) Molybdenum stainless steel (B) Tin (C) Mild steel (D) Aluminium
Last Answer : (C) Mild steel
Description : In a drilling process, the metal is removed by both shearing & extrusion. General purpose drills are made of (A) Stainless steel (B) Mild steel (C) High speed steel (D) High carbon steel
Last Answer : (C) High speed steel
Description : Dies for wire drawing are generally made of (A) Mild steel (B) Stainless steel (C) Carbides (D) High carbon steel
Last Answer : (A) Mild steel
Description : The joint for soldering is supported by binding wire made of (A) Mild steel (B) Copper (C) Soft iron (D) Stainless steel
Description : Sulphuric acid is mixed with ground phosphate rock (to produce phosphoric acid) in a steel digestor lined with (A) Acidic refractory (B) Rubber (C) Karbate (D) Lead or acid proof bricks
Last Answer : (A) Acidic refractory
Description : Sulphuric acid is mixed with ground phosphate rock (to produce phosphoric acid) in a steel digestor lined with (A) Acidic refractory (B) Rubber (C) Karbate (D) Lead or acid-proof bricks
Last Answer : (D) Lead or acid-proof bricks
Description : The steel generally used in R.C.C. work, is (A) Stainless (B) Mild steel (C) High carbon steel (D) High tension steel
Last Answer : Answer: Option B
Description : The steel used in R.C.C. work is (A) Stainless steel (B) Mild steel (C) High carbon steel (D) Wrought iron
Description : The steel used for the manufacture of rails, is (A) Bessemer steel (B) Mild steel (C) Cast steel (D) Stainless steel
Last Answer : Answer: Option A
Description : The steel used in steel cored conductors is usually (a) alloy steel (b) stainless steel (c) mild steel (d) high speed steel (e) all of the above
Last Answer : (c) mild steel
Description : When a lead storage battery is discharged - (1) SO2 is evolved (2) Lead sulphate is consumed (3) Lead is formed (4) Sulphuric acid is consumed
Last Answer : (4) Sulphuric acid is consumed Explanation: Lead storage battery was invented by French physicist Gaston Plante in 1859. In the discharged state both the positive and negative plates become lead sulphate and the electrolyte loses much of its dissolved sulphuric acid and becomes primarily water.