Rankine's theory of earth pressure assumes that the back of the wall is (A) Plane and smooth (B) Plane and rough (C) Vertical and smooth (D) Vertical and rough

Rankine's theory of earth pressure assumes that the back of the wall is
(A) Plane and smooth
(B) Plane and rough
(C) Vertical and smooth
(D) Vertical and rough
by

1 Answer

Answer :

Answer: Option C
by

Related questions

Rankine's theory of active earth pressure assumes (A) Soil mass is homogeneous, dry and cohesionless (B) Ground surface is a plane which may be horizontal or inclined (C) Back of the wall is vertical and smooth (D) All the above

Description : Rankine's theory of active earth pressure assumes (A) Soil mass is homogeneous, dry and cohesionless (B) Ground surface is a plane which may be horizontal or inclined (C) Back of the wall is vertical and smooth (D) All the above

Last Answer : Answer: Option D

Consider the following statements regarding Coulomb’s theory of earth pressure: 1. It is based on wedge theory of earth pressure. 2. It assumes the wall surface to be rough. 3. It may or may not satisfy the static equilibrium condition occurring in nature. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements regarding Coulomb's theory of earth pressure: 1. It is based on wedge theory of earth pressure. 2. It assumes the wall surface to be rough. 3. It may or may not satisfy the static equilibrium condition ... 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (b) 1 & 2 only

Coulomb's wedge theory assumes that (A) Back fill is dry, cohesionless, homogeneous and isotropic (B) Slip surface is the plane which passes through the heel of the wall (C) Position and direction of the resultant earth pressure are known (D) All the above

Description : Coulomb's wedge theory assumes that (A) Back fill is dry, cohesionless, homogeneous and isotropic (B) Slip surface is the plane which passes through the heel of the wall (C) Position and direction of the resultant earth pressure are known (D) All the above

Last Answer : (D) All the above

A heavy ladder resting on floor and against a vertical wall may not be in equilibrium, if (A) The floor is smooth, the wall is rough (B) The floor is rough, the wall is smooth (C) The floor and wall both are smooth surfaces (D) The floor and wall both are rough surfaces

Description : A heavy ladder resting on floor and against a vertical wall may not be in equilibrium, if (A) The floor is smooth, the wall is rough (B) The floor is rough, the wall is smooth (C) The floor and wall both are smooth surfaces (D) The floor and wall both are rough surfaces

Last Answer : (C) The floor and wall both are smooth surfaces

Terzaghi's theory of one dimensional consolidation assumes (A) Load is applied in one direction (B) Coefficient of permeability is constant (C) Excess pore water drains out only in the vertical direction (D) All the above

Description : Terzaghi's theory of one dimensional consolidation assumes (A) Load is applied in one direction (B) Coefficient of permeability is constant (C) Excess pore water drains out only in the vertical direction (D) All the above

Last Answer : Answer: Option D

The design of a retaining wall assumes that the retained earth (A) Is dry (B) Is free from moisture (C) Is not cohesive (D) All the above

Description : The design of a retaining wall assumes that the retained earth (A) Is dry (B) Is free from moisture (C) Is not cohesive (D) All the above

Last Answer : Answer: Option D

A retaining wall 6m high supports a backfill with a surcharge angle of 10°. The back of the wall is inclined to the vertical at a positive batter angle of 5°. If the angle of wall friction is 7°, then the resultant active earth pressure will act at a distance of 2 m above the base and inclined to the horizontal at an angle of (A) 7° (B) 10° (C) 12° (D) 17

Description : A retaining wall 6m high supports a backfill with a surcharge angle of 10°. The back of the wall is inclined to the vertical at a positive batter angle of 5°. If the angle of wall friction is 7°, then the resultant ... inclined to the horizontal at an angle of (A) 7° (B) 10° (C) 12° (D) 17

Last Answer : (C) 12°

On the ladder resting on the ground and leaning against a smooth vertical wall, the force of friction will be (A) Downwards at its upper end (B) Upwards at its upper end (C) Perpendicular to the wall at its upper end (D) Zero at its upper end

Description : On the ladder resting on the ground and leaning against a smooth vertical wall, the force of  friction will be  (A) Downwards at its upper end  (B) Upwards at its upper end  (C) Perpendicular to the wall at its upper end  (D) Zero at its upper end 

Last Answer : (D) Zero at its upper end 

On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be (A) Towards the wall at its upper end (B) Away from the wall at its upper end (C) Upwards at its upper end (D) Downwards at its upper end

Description : On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be (A) Towards the wall at its upper end (B) Away from the wall at its upper end (C) Upwards at its upper end (D) Downwards at its upper end

Last Answer : (C) Upwards at its upper end

Total strain energy theory for the failure of a material at elastic limit, is known (A) Guest's or Trecas' theory (B) St. Venant's theory (C) Rankine's theory (D) Haig's theory

Description : Total strain energy theory for the failure of a material at elastic limit, is known  (A) Guest's or Trecas' theory  (B) St. Venant's theory  (C) Rankine's theory  (D) Haig's theory 

Last Answer : (D) Haig's theory 

Maximum shear stress theory for the failure of a material at the elastic limit, is known (A) Guest's or Trecas' theory (B) St. Venant's theory (C) Rankine's theory (D) Haig's theory

Description : Maximum shear stress theory for the failure of a material at the elastic limit, is known  (A) Guest's or Trecas' theory  (B) St. Venant's theory  (C) Rankine's theory  (D) Haig's theory

Last Answer : (A) Guest's or Trecas' theory

Maximum strain theory for the failure of a material at the elastic limit, is known as (A) Guest's or Trecas' theory (B) St. Venant's theory (C) Rankine's theory (D) Haig's theory

Description : Maximum strain theory for the failure of a material at the elastic limit, is known as  (A) Guest's or Trecas' theory  (B) St. Venant's theory  (C) Rankine's theory  (D) Haig's theory 

Last Answer : (B) St. Venant's theory

Maximum principal stress theory for the failure of a material at elastic point, is known (A) Guest's or Trecas' theory (B) St. Venant's theory (C) Rankine's theory (D) Von Mises' theory

Description : Maximum principal stress theory for the failure of a material at elastic point, is known  (A) Guest's or Trecas' theory  (B) St. Venant's theory  (C) Rankine's theory  (D) Von Mises' theory

Last Answer : (C) Rankine's theory 

For a slab supported on its four edges with corners held down and loaded uniformly, the Marcus correction factor to the moments obtained by Grashoff Rankine's theory (A) Is always less than 1 (B) Is always greater than 1 (C) Can be more than 1 (D) Can be less than 1

Description : For a slab supported on its four edges with corners held down and loaded uniformly, the Marcus correction factor to the moments obtained by Grashoff Rankine's theory (A) Is always less than 1 (B) Is always greater than 1 (C) Can be more than 1 (D) Can be less than 1

Last Answer : Answer: Option A

Terzaghi's analysis assumes: (A) Soil is homogeneous and isotropic (B) Elastic zone has straight boundaries inclined at = to the horizontal and plastic zones fully developed (C) Failure zones do not extend above the horizontal plane through the base of the footing (D) All the above

Description : Terzaghi's analysis assumes: (A) Soil is homogeneous and isotropic (B) Elastic zone has straight boundaries inclined at = to the horizontal and plastic zones fully developed (C) Failure zones do not extend above the horizontal plane through the base of the footing (D) All the above

Last Answer : Answer: Option D

The operation of resection involves the following steps 1. Rough orientation of the plane table 2. The three lines form a triangle of error 3. Drawing lines back through the three control points 4. Select a point in the triangle of error such that each ray is equally rotated either clockwise or anti clockwise 5. The points obtained by three rays are the correct location. The correct sequence is (A) 1, 3, 2, 4, 5 (B) 1, 2, 3, 4, 5 (C) 1, 4, 3, 2, 5 (D) 1, 3, 2, 4, 5

Description : The operation of resection involves the following steps 1. Rough orientation of the plane table 2. The three lines form a triangle of error 3. Drawing lines back through the three control points 4. Select a point in the triangle of error ... 2, 3, 4, 5 (C) 1, 4, 3, 2, 5 (D) 1, 3, 2, 4, 5

Last Answer : (A) 1, 3, 2, 4, 5

In the equation of virtual work, following force is neglected (A) Reaction of any smooth surface with which the body is in contact (B) Reaction of a rough surface of a body which rolls on it without slipping (C) Reaction at a point or an axis, fixed in space, around which a body is constrained to turn (D) All of the above

Description : In the equation of virtual work, following force is neglected (A) Reaction of any smooth surface with which the body is in contact (B) Reaction of a rough surface of a body which rolls on it without ... an axis, fixed in space, around which a body is constrained to turn (D) All of the above

Last Answer : (D) All of the above

Pick up the correct statement from the following: (A) According to the petrological characteristics, concrete aggregates are classified as heavy weight, normal weight and light weight (B) According to the shape of the particles, concrete aggregates are classified as rounded irregular, angular and flaky (C) According to the surface texture of the particles, the concrete aggregates are classified as glassy, smooth, granular, rough, crystalline, honey combed and porous (D) All the above

Description : Pick up the correct statement from the following: (A) According to the petrological characteristics, concrete aggregates are classified as heavy weight, normal weight and light weight (B) According to ... glassy, smooth, granular, rough, crystalline, honey combed and porous (D) All the above

Last Answer : Answer: Option D

The major principal stress in an element of cohesion-less soil within the backfill of a retaining wall is (A) Vertical if the soil is in an active state of plastic equilibrium (B) Vertical if the soil is in a passive state of plastic equilibrium (C) Inclined at 45° to the vertical plane (D) None of the above

Description : The major principal stress in an element of cohesion-less soil within the backfill of a retaining wall is (A) Vertical if the soil is in an active state of plastic equilibrium (B) Vertical if the ... state of plastic equilibrium (C) Inclined at 45° to the vertical plane (D) None of the above

Last Answer : Answer: Option A

On the ladder resting on the ground and leaning against a smooth vertical wall, the force of friction will be?

Description : On the ladder resting on the ground and leaning against a smooth vertical wall, the force of friction will be?

Last Answer : On the ladder resting on the ground and leaning against a smooth vertical wall, the force of friction will be zero at its upper end.

On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be?

Description : On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be?

Last Answer : On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be upwards at its upper end.

Rankine’s And Guest’s Theory Of Failure Are Applicable For What Materials?

Description : Rankine’s And Guest’s Theory Of Failure Are Applicable For What Materials?

Last Answer : Rankine’s theory of failure is applicable for brittle materials. Guest’s theory of failure is applicable for ductile materials.

The design of shafts made of brittle materials is based on (a) Guest’s theory (b) Rankine’s theory (c) St. Venant’s theory (d) Von Mises Theory

Description : The design of shafts made of brittle materials is based on (a) Guest’s theory (b) Rankine’s theory (c) St. Venant’s theory (d) Von Mises Theory

Last Answer : (b) Rankine’s theory

Write any four assumptions of Rankine’s theory made for non-cohesive soils.

Description : Write any four assumptions of Rankine’s theory made for non-cohesive soils.

Last Answer : Assumption of Rankines Theory for non-cohesive soils : i. The soil is semi-infinite, homogenous, dry and cohesion less. ii. The soil element is in the state of plastic equilibrium. iii ... and smooth. v. The wall yield about the base thus satisfies deformation condition for plastic equilibrium. 

What are the difference between Rough Endoplasmic Reticulum (RER) and Smooth Endoplasmic Reticulum (SER)? -Biology

Description : What are the difference between Rough Endoplasmic Reticulum (RER) and Smooth Endoplasmic Reticulum (SER)? -Biology

Last Answer : answer:

In a certain plant rough seeds R are dominant and smooth seeds r RECESSIVE two plants with genotype?

Description : In a certain plant rough seeds R are dominant and smooth seeds r RECESSIVE two plants with genotype?

Last Answer : Need answer

Is limestone rough or smooth?

Description : Is limestone rough or smooth?

Last Answer : Limestone can be smooth but it is mostly rough. You can tell this just buy looking at some or feeling it.

If therapy with multiple drugs causes induction of drug metabolism in your asthma patient, it will (a) Result in increased smooth endoplasmic reticulum (b) Result in increased rough endoplasmic reticulum (c) Result in decreased enzymes in the soluble cytoplasmic fraction (d) Require 3-4 months to reach completion (e) Be irreversible

Description : If therapy with multiple drugs causes induction of drug metabolism in your asthma patient, it will (a) Result in increased smooth endoplasmic reticulum (b) Result in increased rough endoplasmic reticulum ... soluble cytoplasmic fraction (d) Require 3-4 months to reach completion (e) Be irreversible

Last Answer : Ans: A

What is the difference between smooth and rough endoplasmic reticulum ?

Description : What is the difference between smooth and rough endoplasmic reticulum ?

Last Answer : The endoplasmic reticulum is a delicate membranous structure contiguous to the nuclear membrane and present in the cytoplasm. It forms an extense net of channels throughout the cell and it ... conduction of the contraction stimulus. Cell Structure Review - Image Diversity: endoplasmic reticulum

The pollen grains of flowers pollinated by insects are : (1) smooth and dry (2) rough and sticky (3) rough and dry (4) large and, showy

Description : The pollen grains of flowers pollinated by insects are : (1) smooth and dry (2) rough and sticky (3) rough and dry (4) large and, showy

Last Answer : (2) rough and sticky Explanation: Pollen grains are large sticky and heavy, usually with rough surfaces so that they can readily cling onto the insects bodies. They are sticky so that pollen grains settling on them are not easily displaced.

A body absorbs heat most if it is – (1) black and rough (2) black and smooth (3) white and rough (4) white and smooth

Description : A body absorbs heat most if it is – (1) black and rough (2) black and smooth (3) white and rough (4) white and smooth

Last Answer : (1) black and rough Explanation: A black body is an idealized physical body that absorbs all incident electromagnetic radiation, regardless of frequency or angle of incidence. Another property is roughness. Sand is rough and black and so it is a good absorber.

A __________ surface has the maximum thermal emissivity out of the following. (A) Black & smooth (B) Black & rough (C) White & smooth (D) White & rough

Description : A __________ surface has the maximum thermal emissivity out of the following. (A) Black & smooth (B) Black & rough (C) White & smooth (D) White & rough

Last Answer : (B) Black & rough

Appearance of welded structures with respect to riveted structures is a. Smooth b. Rough c. Same d. None

Description : Appearance of welded structures with respect to riveted structures is a. Smooth b. Rough c. Same d. None

Last Answer : a. Smooth

Epitheliogenesis imperfecta ligua bovis is a defect in which tongue is A A. Abnormally smooth B. Normally smooth C. Abnormally rough D. All of these

Description : Epitheliogenesis imperfecta ligua bovis is a defect in which tongue is A A. Abnormally smooth B. Normally smooth C. Abnormally rough D. All of these

Last Answer : Abnormally smooth

Identify the components labelled A, B, C and D in the diagram below from the list (i) to (viii) given along withComponents : (i) Cristae of mitochondria (ii) Inner membrane of mitochondria (iii) Cytoplasm (iv) Smooth endoplasmic reticulum (v) Rough endoplasmic reticulum (vi) Mitochondrial matrix (vii) Cell vacuole (viii) Nucleus The correct components are: A B C D (a) (v) (iv) (viii) (iii) (b) (i) (iv) (viii) (vi) (c) (vi) (v) (iv) (vii) (d) (v) (i) (iii) (ii)

Description : Identify the components labelled A, B, C and D in the diagram below from the list (i) to (viii) given along with Components : (i) Cristae of mitochondria (ii) Inner membrane of mitochondria (iii) Cytoplasm (iv) Smooth endoplasmic ... viii) (vi) (c) (vi) (v) (iv) (vii) (d) (v) (i) (iii) (ii)

Last Answer : (a) (v) (iv) (viii) (iii)

Select the correct matching in the following pairs. (a) Rough ER – Synthesis of glycogen (b) Rough ER – Oxidation of fatty acids (c) Smooth ER – Oxidation of phospholipids (d) Smooth ER – Synthesis of lipids

Description : Select the correct matching in the following pairs. (a) Rough ER – Synthesis of glycogen (b) Rough ER – Oxidation of fatty acids (c) Smooth ER – Oxidation of phospholipids (d) Smooth ER – Synthesis of lipids

Last Answer : (d) Smooth ER – Synthesis of lipids

Nuclear envelope is a derivative of (a) microtubules (b) rough endoplasmic reticulum (c) smooth endoplasmic reticulum (d) membrane of Golgi complex.

Description : Nuclear envelope is a derivative of (a) microtubules (b) rough endoplasmic reticulum (c) smooth endoplasmic reticulum (d) membrane of Golgi complex.

Last Answer : (b) rough endoplasmic reticulum

In turbulent flow, a rough pipe has the same friction factor as a smooth pipe (A) In the zone of complete turbulence (B) When the roughness projections are much smaller than the thickness of the laminar film (C) Everywhere in the transition zone (D) When the friction factor is independent of the Reynold's number

Description : In turbulent flow, a rough pipe has the same friction factor as a smooth pipe (A) In the zone of complete turbulence (B) When the roughness projections are much smaller than the thickness of ... ) Everywhere in the transition zone (D) When the friction factor is independent of the Reynold's number

Last Answer : (B) When the roughness projections are much smaller than the thickness of the laminar film

In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said to have the same hydraulic roughness, when they have equal values of (A) Relative roughness (B) Absolute roughness (C) Friction co-efficient for flows at equal Reynold number (D) All (A), (B) & (C)

Description : In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said ... co-efficient for flows at equal Reynold number (D) All (A), (B) & (C)

Last Answer : (C) Friction co-efficient for flows at equal Reynold number

Consider two pipes of same length and diameter through which water is passed at the same velocity. The friction factor for rough pipe is f1 and that for smooth pipe is f2 . Pick out the correct statement(A) f1 = f2 (B) f1 < f2 (C) f1 > f2 (D) Data not sufficient to relate f1 & f2

Description : Consider two pipes of same length and diameter through which water is passed at the same velocity. The friction factor for rough pipe is f1 and that for smooth pipe is f2 . Pick out the correct statement. (A) f1 = f2 (B) f1 < f2 (C) f1 > f2 (D) Data not sufficient to relate f1 & f2

Last Answer : (C) f1 > f2

In the complete turbulence zone (in rough pipes), the (A) Rough and smooth pipes have the same friction factor (B) Laminar film covers the roughness projections (C) Friction factor depends upon NRe only (D) Friction factor is independent of the relative roughness

Description : In the complete turbulence zone (in rough pipes), the (A) Rough and smooth pipes have the same friction factor (B) Laminar film covers the roughness projections (C) Friction factor depends upon NRe only (D) Friction factor is independent of the relative roughness

Last Answer : (D) Friction factor is independent of the relative roughness

Which of the following is not a characteristic observed in material failure by fatigue fracture? (A) Plastic deformation of material does not occur (B) Initiation of crack from below the surface does not occur (C) Initiation of crack occurs on the surface of the machine part (D) Presence of both rough & smooth zone with conchoidal markings in smooth zone of the surface

Description : Which of the following is not a characteristic observed in material failure by fatigue fracture? (A) Plastic deformation of material does not occur (B) Initiation of crack from below the surface does ... (D) Presence of both rough & smooth zone with conchoidal markings in smooth zone of the surface

Last Answer : Option B

The term dispersion describes the process of ∙ A. separating light into its component frequencies ∙ B. reflecting light from a smooth surface ∙ C. the process by which light is absorbed by an uneven rough surface ∙ D. light scattering

Description : The term dispersion describes the process of ∙ A. separating light into its component frequencies ∙ B. reflecting light from a smooth surface ∙ C. the process by which light is absorbed by an uneven rough surface ∙ D. light scattering

Last Answer : A. separating light into its component frequencies

The termdispersion describestheprocessof a.separatinglightinto its componentfrequencies b. reflecting light from a smooth surface c. the process by which light is absorbed by an uneven rough surface d. light scattering

Description : The termdispersion describestheprocessof a.separatinglightinto its componentfrequencies b. reflecting light from a smooth surface c. the process by which light is absorbed by an uneven rough surface d. light scattering

Last Answer : a.separatinglightinto its componentfrequencies

Why do you polish the teeth before seating of a partial denture: A. To smooth the rough surface B. To minimise the retention of plaque C. To increase the adoptability of occlusal rests

Description : Why do you polish the teeth before seating of a partial denture: A. To smooth the rough surface B. To minimise the retention of plaque C. To increase the adoptability of occlusal rests

Last Answer : B. To minimise the retention of plaque

The difference between smooth and rough endoplasmi reticulum is the lack of: a) ATP b) proteins c) ribosomes d) peroxisomes

Description : The difference between smooth and rough endoplasmi reticulum is the lack of: a) ATP b) proteins c) ribosomes d) peroxisomes

Last Answer : ANSWER: C -- RIBOSOMES

The pollen grains of flowers pollinated by insects are : (1) smooth and dry (2) rough and sticky (3) rough and dry (4) large and showy

Description : The pollen grains of flowers pollinated by insects are : (1) smooth and dry (2) rough and sticky (3) rough and dry (4) large and showy

Last Answer : rough and sticky

A body absorbs heat most if it is (1) black and rough (2) black and smooth (3) white and rough (4) white and smooth

Description : A body absorbs heat most if it is (1) black and rough (2) black and smooth (3) white and rough (4) white and smooth

Last Answer : black and rough

Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head or trib arch (C) The levelling screws are used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Description : Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head ... used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Last Answer : (D) All the above

The direct shear test suffers from the following disadvantage: (A) Drain condition cannot be controlled (B) Pore water pressure cannot be measured (C) Shear stress on the failure plane is not uniform (D) The area under the shear and vertical loads does not remain constant throughout the test

Description : The direct shear test suffers from the following disadvantage: (A) Drain condition cannot be controlled (B) Pore water pressure cannot be measured (C) Shear stress on the failure plane is not uniform (D) The area under the shear and vertical loads does not remain constant throughout the test

Last Answer : Answer: Option C