In the equation of virtual work, following force is neglected (A) Reaction of any smooth surface with which the body is in contact (B) Reaction of a rough surface of a body which rolls on it without slipping (C) Reaction at a point or an axis, fixed in space, around which a body is constrained to turn (D) All of the above

In the equation of virtual work, following force is neglected
(A) Reaction of any smooth surface with which the body is in contact
(B) Reaction of a rough surface of a body which rolls on it without slipping
(C) Reaction at a point or an axis, fixed in space, around which a body is constrained to turn
(D) All of the above
by

1 Answer

Answer :

(D) All of the above
by

Related questions

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Proportional to the coefficient of static friction b.Proportional to the coefficient of dynamic friction c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above

Last Answer : c. Indeterminate

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Indeterminate b.Proportional to the coefficient of dynamic friction c.Determinate but depends on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Last Answer : c. Determinate but depends on the acceleration of the cylinder

Which one of the following is not the law of dry friction? a.If friction is neglected, the reactions are always normal to the surfaces on contact b.Friction always acts to oppose the relative motion of the free body c.If static friction is acting, the value of the friction force may vary from zero to its maximum value d.The force of friction is always normal to the surface e.All of the above

Description : Which one of the following is not the law of dry friction? a.If friction is neglected, the reactions are always normal to the surfaces on contact b.Friction always acts to oppose the relative motion of ... its maximum value d.The force of friction is always normal to the surface e.All of the above

Last Answer : d. The force of friction is always normal to the surface

Ball "A" ROLLS down an inclined plane without slipping. An identical ball, Ball "B", SLIDES down the same inclined plane without rolling. Which of the following statements is true? w) Ball "A" has more kinetic energy x) Ball "B" has more kinetic energy y) their kinetic energies are the same z) their rotational kinetic energies are equal just after release

Description : Ball "A" ROLLS down an inclined plane without slipping. An identical ball, Ball "B", SLIDES down the same inclined plane without rolling. Which of the following statements is true? w) Ball ... y) their kinetic energies are the same z) their rotational kinetic energies are equal just after release  

Last Answer : ANSWER: Y -- THEIR KINETIC ENERGIES ARE THE SAME

The statement, regarding the size of stones used at the wearing surface. "The size of a stone used on a road must be in due proportion to the space occupied by a wheel of ordinary dimensions on a smooth level surface. The point of contact will be found to be longitudinal about 2.5 cm and everypiece of stone put into the road which exceeds 2.5 cm in any of its dimension is mischievous" was made by (A) Telford (B) Macadam (C) Tresguet (D) Sully

Description : The statement, regarding the size of stones used at the wearing surface. "The size of a stone used on a road must be in due proportion to the space occupied by a wheel of ordinary dimensions on a smooth ... dimension is mischievous" was made by (A) Telford (B) Macadam (C) Tresguet (D) Sully

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) According to the petrological characteristics, concrete aggregates are classified as heavy weight, normal weight and light weight (B) According to the shape of the particles, concrete aggregates are classified as rounded irregular, angular and flaky (C) According to the surface texture of the particles, the concrete aggregates are classified as glassy, smooth, granular, rough, crystalline, honey combed and porous (D) All the above

Description : Pick up the correct statement from the following: (A) According to the petrological characteristics, concrete aggregates are classified as heavy weight, normal weight and light weight (B) According to ... glassy, smooth, granular, rough, crystalline, honey combed and porous (D) All the above

Last Answer : Answer: Option D

Incorrect statement for co-efficient of friction could be that A. The coefficient of friction is denoted by the Greek letter µ. B. The coefficient of friction is directly proportional to the force of friction C. The coefficient of friction is constant even in the conditions of fast slipping and high contact pressure D. The coefficient of friction is inversely proportional to the force pressing the surfaces together

Description : Incorrect statement for co-efficient of friction could be that A. The coefficient of friction is denoted by the Greek letter µ. B. The coefficient of friction is directly proportional to ... D. The coefficient of friction is inversely proportional to the force pressing the surfaces together

Last Answer : The coefficient of friction is constant even in the conditions of fast slipping and high contact pressure

AB and CD are two smooth parallel walls. A child rolls a ball along ground from A towards point P find PD so that ball reaches point B after striking

Description : AB and CD are two smooth parallel walls. A child rolls a ball along ground from A towards point P find PD so that ball reaches point B after striking

Last Answer : AB and CD are two smooth parallel walls. A child rolls a ball along ground from A towards point P find PD so that ball ... B. 0.5 m C. 1.2 m D. 0.6 m

The Newton's law of resistance is based on the assumption that the (A) Planes of the body are completely smooth (B) Space around the body is completely filled with the fluid (C) Fluid particles do not exert any influence on one another (D) All of the above

Description : The Newton's law of resistance is based on the assumption that the (A) Planes of the body are completely smooth (B) Space around the body is completely filled with the fluid (C) Fluid particles do not exert any influence on one another (D) All of the above

Last Answer : Answer: Option D

A __________ surface has the maximum thermal emissivity out of the following. (A) Black & smooth (B) Black & rough (C) White & smooth (D) White & rough

Description : A __________ surface has the maximum thermal emissivity out of the following. (A) Black & smooth (B) Black & rough (C) White & smooth (D) White & rough

Last Answer : (B) Black & rough

Which of the following is not a characteristic observed in material failure by fatigue fracture? (A) Plastic deformation of material does not occur (B) Initiation of crack from below the surface does not occur (C) Initiation of crack occurs on the surface of the machine part (D) Presence of both rough & smooth zone with conchoidal markings in smooth zone of the surface

Description : Which of the following is not a characteristic observed in material failure by fatigue fracture? (A) Plastic deformation of material does not occur (B) Initiation of crack from below the surface does ... (D) Presence of both rough & smooth zone with conchoidal markings in smooth zone of the surface

Last Answer : Option B

The term dispersion describes the process of ∙ A. separating light into its component frequencies ∙ B. reflecting light from a smooth surface ∙ C. the process by which light is absorbed by an uneven rough surface ∙ D. light scattering

Description : The term dispersion describes the process of ∙ A. separating light into its component frequencies ∙ B. reflecting light from a smooth surface ∙ C. the process by which light is absorbed by an uneven rough surface ∙ D. light scattering

Last Answer : A. separating light into its component frequencies

The termdispersion describestheprocessof a.separatinglightinto its componentfrequencies b. reflecting light from a smooth surface c. the process by which light is absorbed by an uneven rough surface d. light scattering

Description : The termdispersion describestheprocessof a.separatinglightinto its componentfrequencies b. reflecting light from a smooth surface c. the process by which light is absorbed by an uneven rough surface d. light scattering

Last Answer : a.separatinglightinto its componentfrequencies

Why do you polish the teeth before seating of a partial denture: A. To smooth the rough surface B. To minimise the retention of plaque C. To increase the adoptability of occlusal rests

Description : Why do you polish the teeth before seating of a partial denture: A. To smooth the rough surface B. To minimise the retention of plaque C. To increase the adoptability of occlusal rests

Last Answer : B. To minimise the retention of plaque

A heavy ladder resting on floor and against a vertical wall may not be in equilibrium, if (A) The floor is smooth, the wall is rough (B) The floor is rough, the wall is smooth (C) The floor and wall both are smooth surfaces (D) The floor and wall both are rough surfaces

Description : A heavy ladder resting on floor and against a vertical wall may not be in equilibrium, if (A) The floor is smooth, the wall is rough (B) The floor is rough, the wall is smooth (C) The floor and wall both are smooth surfaces (D) The floor and wall both are rough surfaces

Last Answer : (C) The floor and wall both are smooth surfaces

Rankine's theory of earth pressure assumes that the back of the wall is (A) Plane and smooth (B) Plane and rough (C) Vertical and smooth (D) Vertical and rough

Description : Rankine's theory of earth pressure assumes that the back of the wall is (A) Plane and smooth (B) Plane and rough (C) Vertical and smooth (D) Vertical and rough

Last Answer : Answer: Option C

A body absorbs heat most if it is – (1) black and rough (2) black and smooth (3) white and rough (4) white and smooth

Description : A body absorbs heat most if it is – (1) black and rough (2) black and smooth (3) white and rough (4) white and smooth

Last Answer : (1) black and rough Explanation: A black body is an idealized physical body that absorbs all incident electromagnetic radiation, regardless of frequency or angle of incidence. Another property is roughness. Sand is rough and black and so it is a good absorber.

A body absorbs heat most if it is (1) black and rough (2) black and smooth (3) white and rough (4) white and smooth

Description : A body absorbs heat most if it is (1) black and rough (2) black and smooth (3) white and rough (4) white and smooth

Last Answer : black and rough

What is the usual value of angle of nip for crushing of ordinary rock in smooth steel crushing rolls? (A) 16° (B) 32° (C) 40° (D) 46°

Description : What is the usual value of angle of nip for crushing of ordinary rock in smooth steel crushing rolls? (A) 16° (B) 32° (C) 40° (D) 46°

Last Answer : (B) 32°

The ball bearings are provided with a cage (a) to reduce friction (b) to facilitate slipping of balls (c) to prevent the lubricant from flowing out (d) to maintain the balls at a fixed distance apart

Description : The ball bearings are provided with a cage (a) to reduce friction (b) to facilitate slipping of balls (c) to prevent the lubricant from flowing out (d) to maintain the balls at a fixed distance apart

Last Answer : (d) to maintain the balls at a fixed distance apart

A man carrying a load on his back bends forward because of one of the following reasons: (a) To adjust the centre of gravity of the system such that the vertical line through the centre of gravity passes within the base (b) The man feels lighter because of greater reaction (c) To prevent the load from slipping over and falling down (d) To keep the centre of gravity of the system outside the body

Description : A man carrying a load on his back bends forward because of one of the following reasons: (a) To adjust the centre of gravity of the system such that the vertical line through the centre of gravity ... slipping over and falling down (d) To keep the centre of gravity of the system outside the body

Last Answer : Ans:(a)

A wheeled tractor hauling unit is working on firm earth. The total loaded weight distribution of this unit is: Drive wheels: 25000 kg Scraper wheels: 10000 kg If the coefficient of traction for wheeled tractor on firm earth is 0.5, the rimpull which this tractor can exert without slipping is (A) 10000 kg (B) 12500 kg (C) 22500 kg (D) 5000 kg

Description : A wheeled tractor hauling unit is working on firm earth. The total loaded weight distribution of this unit is: Drive wheels: 25000 kg Scraper wheels: 10000 kg If the coefficient of traction for wheeled tractor on firm ... without slipping is (A) 10000 kg (B) 12500 kg (C) 22500 kg (D) 5000 kg

Last Answer : (B) 12500 kg

A body of mass 37 kg rests on a rough horizontal surface. The minimum horizontal force required to just start the motion

Description : A body of mass 37 kg rests on a rough horizontal surface. The minimum horizontal force required to just start the motion

Last Answer : A body of mass 37 kg rests on a rough horizontal surface. The minimum horizontal force required to just start the ... ) µs = 0.188 b) µk = 0.118

Pick out the correct statement pertaining to Venturimeter. (A) A Venturimeter with a fixed pressure drop discharges more, when the flow is vertically downward, than when the flow is vertically upward (B) The co-efficient of contraction of a Venturimeter is always unity (C) For a fixed pressure drop, the discharge of a gas through a Venturimeter is greater, when compressibility is taken into account, than when it is neglected (D) None of these

Description : Pick out the correct statement pertaining to Venturimeter. (A) A Venturimeter with a fixed pressure drop discharges more, when the flow is vertically downward, than when the flow is vertically upward (B ... , when compressibility is taken into account, than when it is neglected (D) None of these

Last Answer : (D) None of these

In continuous beam if it is end is fixed supported the bending moment will be a. zero b. neglected c. infinite

Description : In continuous beam if it is end is fixed supported the bending moment will be a. zero b. neglected c. infinite

Last Answer : a. zero

In a fixed beam the total change of slope along the span is a. Zero b.infinite c. neglected d.assumed to be unit value

Description : In a fixed beam the total change of slope along the span is a. Zero b.infinite c. neglected d.assumed to be unit value

Last Answer : a. Zero

48. A perfectly elastic body (a) Can move freely (b) Has perfectly smooth surface (c) Is not deformed by any external surface (d) Recovers its original size and shape when the deforming force is removed.

Description : 48. A perfectly elastic body (a) Can move freely (b) Has perfectly smooth surface (c) Is not deformed by any external surface (d) Recovers its original size and shape when the deforming force is removed.

Last Answer : d) Recovers its original size and shape when the deforming force is removed.

What are the difference between Rough Endoplasmic Reticulum (RER) and Smooth Endoplasmic Reticulum (SER)? -Biology

Description : What are the difference between Rough Endoplasmic Reticulum (RER) and Smooth Endoplasmic Reticulum (SER)? -Biology

Last Answer : answer:

In a certain plant rough seeds R are dominant and smooth seeds r RECESSIVE two plants with genotype?

Description : In a certain plant rough seeds R are dominant and smooth seeds r RECESSIVE two plants with genotype?

Last Answer : Need answer

Is limestone rough or smooth?

Description : Is limestone rough or smooth?

Last Answer : Limestone can be smooth but it is mostly rough. You can tell this just buy looking at some or feeling it.

If therapy with multiple drugs causes induction of drug metabolism in your asthma patient, it will (a) Result in increased smooth endoplasmic reticulum (b) Result in increased rough endoplasmic reticulum (c) Result in decreased enzymes in the soluble cytoplasmic fraction (d) Require 3-4 months to reach completion (e) Be irreversible

Description : If therapy with multiple drugs causes induction of drug metabolism in your asthma patient, it will (a) Result in increased smooth endoplasmic reticulum (b) Result in increased rough endoplasmic reticulum ... soluble cytoplasmic fraction (d) Require 3-4 months to reach completion (e) Be irreversible

Last Answer : Ans: A

What is the difference between smooth and rough endoplasmic reticulum ?

Description : What is the difference between smooth and rough endoplasmic reticulum ?

Last Answer : The endoplasmic reticulum is a delicate membranous structure contiguous to the nuclear membrane and present in the cytoplasm. It forms an extense net of channels throughout the cell and it ... conduction of the contraction stimulus. Cell Structure Review - Image Diversity: endoplasmic reticulum

The pollen grains of flowers pollinated by insects are : (1) smooth and dry (2) rough and sticky (3) rough and dry (4) large and, showy

Description : The pollen grains of flowers pollinated by insects are : (1) smooth and dry (2) rough and sticky (3) rough and dry (4) large and, showy

Last Answer : (2) rough and sticky Explanation: Pollen grains are large sticky and heavy, usually with rough surfaces so that they can readily cling onto the insects bodies. They are sticky so that pollen grains settling on them are not easily displaced.

Appearance of welded structures with respect to riveted structures is a. Smooth b. Rough c. Same d. None

Description : Appearance of welded structures with respect to riveted structures is a. Smooth b. Rough c. Same d. None

Last Answer : a. Smooth

Epitheliogenesis imperfecta ligua bovis is a defect in which tongue is A A. Abnormally smooth B. Normally smooth C. Abnormally rough D. All of these

Description : Epitheliogenesis imperfecta ligua bovis is a defect in which tongue is A A. Abnormally smooth B. Normally smooth C. Abnormally rough D. All of these

Last Answer : Abnormally smooth

Identify the components labelled A, B, C and D in the diagram below from the list (i) to (viii) given along withComponents : (i) Cristae of mitochondria (ii) Inner membrane of mitochondria (iii) Cytoplasm (iv) Smooth endoplasmic reticulum (v) Rough endoplasmic reticulum (vi) Mitochondrial matrix (vii) Cell vacuole (viii) Nucleus The correct components are: A B C D (a) (v) (iv) (viii) (iii) (b) (i) (iv) (viii) (vi) (c) (vi) (v) (iv) (vii) (d) (v) (i) (iii) (ii)

Description : Identify the components labelled A, B, C and D in the diagram below from the list (i) to (viii) given along with Components : (i) Cristae of mitochondria (ii) Inner membrane of mitochondria (iii) Cytoplasm (iv) Smooth endoplasmic ... viii) (vi) (c) (vi) (v) (iv) (vii) (d) (v) (i) (iii) (ii)

Last Answer : (a) (v) (iv) (viii) (iii)

Select the correct matching in the following pairs. (a) Rough ER – Synthesis of glycogen (b) Rough ER – Oxidation of fatty acids (c) Smooth ER – Oxidation of phospholipids (d) Smooth ER – Synthesis of lipids

Description : Select the correct matching in the following pairs. (a) Rough ER – Synthesis of glycogen (b) Rough ER – Oxidation of fatty acids (c) Smooth ER – Oxidation of phospholipids (d) Smooth ER – Synthesis of lipids

Last Answer : (d) Smooth ER – Synthesis of lipids

Nuclear envelope is a derivative of (a) microtubules (b) rough endoplasmic reticulum (c) smooth endoplasmic reticulum (d) membrane of Golgi complex.

Description : Nuclear envelope is a derivative of (a) microtubules (b) rough endoplasmic reticulum (c) smooth endoplasmic reticulum (d) membrane of Golgi complex.

Last Answer : (b) rough endoplasmic reticulum

In turbulent flow, a rough pipe has the same friction factor as a smooth pipe (A) In the zone of complete turbulence (B) When the roughness projections are much smaller than the thickness of the laminar film (C) Everywhere in the transition zone (D) When the friction factor is independent of the Reynold's number

Description : In turbulent flow, a rough pipe has the same friction factor as a smooth pipe (A) In the zone of complete turbulence (B) When the roughness projections are much smaller than the thickness of ... ) Everywhere in the transition zone (D) When the friction factor is independent of the Reynold's number

Last Answer : (B) When the roughness projections are much smaller than the thickness of the laminar film

In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said to have the same hydraulic roughness, when they have equal values of (A) Relative roughness (B) Absolute roughness (C) Friction co-efficient for flows at equal Reynold number (D) All (A), (B) & (C)

Description : In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said ... co-efficient for flows at equal Reynold number (D) All (A), (B) & (C)

Last Answer : (C) Friction co-efficient for flows at equal Reynold number

Consider two pipes of same length and diameter through which water is passed at the same velocity. The friction factor for rough pipe is f1 and that for smooth pipe is f2 . Pick out the correct statement(A) f1 = f2 (B) f1 < f2 (C) f1 > f2 (D) Data not sufficient to relate f1 & f2

Description : Consider two pipes of same length and diameter through which water is passed at the same velocity. The friction factor for rough pipe is f1 and that for smooth pipe is f2 . Pick out the correct statement. (A) f1 = f2 (B) f1 < f2 (C) f1 > f2 (D) Data not sufficient to relate f1 & f2

Last Answer : (C) f1 > f2

In the complete turbulence zone (in rough pipes), the (A) Rough and smooth pipes have the same friction factor (B) Laminar film covers the roughness projections (C) Friction factor depends upon NRe only (D) Friction factor is independent of the relative roughness

Description : In the complete turbulence zone (in rough pipes), the (A) Rough and smooth pipes have the same friction factor (B) Laminar film covers the roughness projections (C) Friction factor depends upon NRe only (D) Friction factor is independent of the relative roughness

Last Answer : (D) Friction factor is independent of the relative roughness

The difference between smooth and rough endoplasmi reticulum is the lack of: a) ATP b) proteins c) ribosomes d) peroxisomes

Description : The difference between smooth and rough endoplasmi reticulum is the lack of: a) ATP b) proteins c) ribosomes d) peroxisomes

Last Answer : ANSWER: C -- RIBOSOMES

The pollen grains of flowers pollinated by insects are : (1) smooth and dry (2) rough and sticky (3) rough and dry (4) large and showy

Description : The pollen grains of flowers pollinated by insects are : (1) smooth and dry (2) rough and sticky (3) rough and dry (4) large and showy

Last Answer : rough and sticky

Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head or trib arch (C) The levelling screws are used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Description : Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head ... used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Last Answer : (D) All the above

_________ is not constrained by prior work.

Description : _________ is not constrained by prior work.

Last Answer : Greenfield project

What sort if surface should a ramp have to prevent people slipping?

Description : What sort if surface should a ramp have to prevent people slipping?

Last Answer : Need answer

The rough surface of a horizontal table offers a definite maximum opposing force to initiate the motion of a block along with the table,

Description : The rough surface of a horizontal table offers a definite maximum opposing force to initiate the motion of a block along with the table,

Last Answer : The rough surface of a horizontal table offers a definite maximum opposing force to initiate the motion of ... of F2 adds up to the opposing force.

Is it true that more force must be applied when pushing something across rough surface?

Description : Is it true that more force must be applied when pushing something across rough surface?

Last Answer : What is the answer ?

The walls which are necessary on the hill side of roadway where earth has to be retained from slipping is known as (A) Retaining wall (B) Breast wall (C) Parapet wall (D) None of the above

Description : The walls which are necessary on the hill side of roadway where earth has to be retained from slipping is known as (A) Retaining wall (B) Breast wall (C) Parapet wall (D) None of the above

Last Answer : Answer: Option B