A soil mass is said to be in plastic equilibrium if (A) It is stressed to maximum (B) It is on the verge of failure (C) It is in plastic stage (D) It starts flowing

A soil mass is said to be in plastic equilibrium if
(A) It is stressed to maximum
(B) It is on the verge of failure
(C) It is in plastic stage
(D) It starts flowing
by

1 Answer

Answer :

Answer: Option B
by

Related questions

Concerning educational films, it can be truthfully said that Options: A) They differ from commercial films chiefly is the basis of nature of the film B) Motion picture production by school children has proved to be a failure C) War developments advanced the educational use of films by decades D) The interest factor in educational films was stressed from the start

Description : Concerning educational films, it can be truthfully said that Options: A) They differ from commercial films chiefly is the basis of nature of the film B) Motion picture production by school children ... use of films by decades D) The interest factor in educational films was stressed from the start

Last Answer : C) War developments advanced the educational use of films by decades 

The minimum water content at which the soil retains its liquid state and also possesses a small shearing strength against flowing, is known (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Permeability limit

Description : The minimum water content at which the soil retains its liquid state and also possesses a small shearing strength against flowing, is known (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Permeability limit

Last Answer : (A) Liquid limit

If the natural water content of soil mass lies between its liquid limit and plastic limit, the soil mass is said to be in (A) Liquid state (B) Plastic state (C) Semisolid state (D) Solid state

Description : If the natural water content of soil mass lies between its liquid limit and plastic limit, the soil mass is said to be in (A) Liquid state (B) Plastic state (C) Semisolid state (D) Solid state

Last Answer : Answer: Option B

In non-cohesive soil in passive state of plastic equilibrium (A) Major principal stress is horizontal (B) Minor principal stress is vertical (C) Major principal stress is vertical (D) Minor and major principal stresses are equally inclined to the horizontal

Description : In non-cohesive soil in passive state of plastic equilibrium (A) Major principal stress is horizontal (B) Minor principal stress is vertical (C) Major principal stress is vertical (D) Minor and major principal stresses are equally inclined to the horizontal

Last Answer : (B) Minor principal stress is vertical

In active state of plastic equilibrium in a non cohesive soil with horizontal ground surface (A) Major principal stress is horizontal (B) Minor principal stress is vertical (C) Major principal stress is vertical (D) Minor and major principal stresses are equally inclined to horizontal

Description : In active state of plastic equilibrium in a non cohesive soil with horizontal ground surface (A) Major principal stress is horizontal (B) Minor principal stress is vertical (C) Major principal stress is vertical (D) Minor and major principal stresses are equally inclined to horizontal

Last Answer : Answer: Option C

The major principal stress in an element of cohesion-less soil within the backfill of a retaining wall is (A) Vertical if the soil is in an active state of plastic equilibrium (B) Vertical if the soil is in a passive state of plastic equilibrium (C) Inclined at 45° to the vertical plane (D) None of the above

Description : The major principal stress in an element of cohesion-less soil within the backfill of a retaining wall is (A) Vertical if the soil is in an active state of plastic equilibrium (B) Vertical if the ... state of plastic equilibrium (C) Inclined at 45° to the vertical plane (D) None of the above

Last Answer : Answer: Option A

The maximum water content at which a reduction in water content does not cause a decrease in volume of a soil mass, is known (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Permeability limit

Description : The maximum water content at which a reduction in water content does not cause a decrease in volume of a soil mass, is known (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Permeability limit

Last Answer : (C) Shrinkage limit

Terzaghi's analysis assumes: (A) Soil is homogeneous and isotropic (B) Elastic zone has straight boundaries inclined at = to the horizontal and plastic zones fully developed (C) Failure zones do not extend above the horizontal plane through the base of the footing (D) All the above

Description : Terzaghi's analysis assumes: (A) Soil is homogeneous and isotropic (B) Elastic zone has straight boundaries inclined at = to the horizontal and plastic zones fully developed (C) Failure zones do not extend above the horizontal plane through the base of the footing (D) All the above

Last Answer : Answer: Option D

Choose the wrong statement (A) Fluids are capable of flowing (B) Fluids conform to the shape of the containing vessels (C) When in equilibrium, fluids cannot sustain tangential forces (D) When in equilibrium, fluids can sustain shear forces

Description : Choose the wrong statement (A) Fluids are capable of flowing (B) Fluids conform to the shape of the containing vessels (C) When in equilibrium, fluids cannot sustain tangential forces (D) When in equilibrium, fluids can sustain shear forces

Last Answer : Answer: Option D

The flow in a pipe or channel is said to be non-uniform when (A) The liquid particles at all sections have the same velocities (B) The liquid particles at different sections have different velocities (C) The quantity of liquid flowing per second is constant (D) Each liquid particle has a definite path

Description : The flow in a pipe or channel is said to be non-uniform when (A) The liquid particles at all sections have the same velocities (B) The liquid particles at different sections have different ... The quantity of liquid flowing per second is constant (D) Each liquid particle has a definite path

Last Answer : Answer: Option B

The flow in a pipe or channel is said to be uniform when (A) The liquid particles at all sections have the same velocities (B) The liquid particles at different sections have different velocities (C) The quantity of liquid flowing per second is constant (D) Each liquid particle has a definite path

Description : The flow in a pipe or channel is said to be uniform when (A) The liquid particles at all sections have the same velocities (B) The liquid particles at different sections have different ... The quantity of liquid flowing per second is constant (D) Each liquid particle has a definite path

Last Answer : Answer: Option A

Which of the following statement is correct? (A) In a compressible flow, the volume of the flowing liquid changes during the flow (B) A flow, in which the volume of the flowing liquid does not change, is called incompressible flow (C) When the particles rotate about their own axes while flowing, the flow is said to be rotational flow (D) All of the above

Description : Which of the following statement is correct? (A) In a compressible flow, the volume of the flowing liquid changes during the flow (B) A flow, in which the volume of the flowing liquid does not change, ... their own axes while flowing, the flow is said to be rotational flow (D) All of the above

Last Answer : Answer: Option D

is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is (A) f = (P/A) + (Z/M) (B) f = (A/P) + (M/Z) (C) f = (P/A) + (M/Z) (D) f = (P/A) + (M/6Z)

Description : is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is (A) f = (P/A) + (Z/M) ... ) + (M/Z) (C) f = (P/A) + (M/Z) (D) f = (P/A) + (M/6Z)

Last Answer : Answer: Option C

If the maximum dip of a parabolic tendon carrying tension P is h and the effective length of the pre-stressed beam is L, the upward uniform pressure will be (A) 8hp/l (B) 8hp/l² (C) 8hl/p (D) 8hl/p²

Description : If the maximum dip of a parabolic tendon carrying tension P is h and the effective length of the pre-stressed beam is L, the upward uniform pressure will be (A) 8hp/l (B) 8hp/l² (C) 8hl/p (D) 8hl/p²

Last Answer : Answer: Option B

A pre-stressed rectangular beam which carries two concentrated loads W at L/3 from either end, is provided with a bent tendon with tension P such that central one-third portion of the tendon remains parallel to the longitudinal axis, the maximum dip h is (A) WL/P (B) WL/2P (C) WL/3P (D) WL/4P

Description : A pre-stressed rectangular beam which carries two concentrated loads W at L/3 from either end, is provided with a bent tendon with tension P such that central one-third portion of the tendon remains parallel to the longitudinal axis, the maximum dip h is (A) WL/P (B) WL/2P (C) WL/3P (D) WL/4P

Last Answer : Answer: Option C

is the pre-stressed force applied to tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The minimum stress on the beam subjected to a maximum bending moment is (A) f = (P/A) - (Z/M) (B) f = (A/P) - (M/Z) (C) f = (P/A) - (M/Z) (D) f = (P/A) - (M/6Z)

Description : is the pre-stressed force applied to tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The minimum stress on the beam subjected to a maximum bending moment is (A) f = (P/A) - (Z/M) (B) f = (A/P) - (M/Z) (C) f = (P/A) - (M/Z) (D) f = (P/A) - (M/6Z)

Last Answer : Answer: Option C

The section in which concrete is not fully stressed to its permissible value when stress in steel reaches its maximum value is (a) Under-reinforced section (b) Over-reinforced section (c) Critical section (d) Balanced section

Description : The section in which concrete is not fully stressed to its permissible value when stress in steel reaches its maximum value is (a) Under-reinforced section (b) Over-reinforced section (c) Critical section (d) Balanced section

Last Answer : (a) Under-reinforced section

An ideal plastic substance indicates no deformation, when stressed upto yield stress, but behaves like a Newtonian fluid beyond yield stress. Which of the following is an ideal plastic? (A) Sewage sludge (B) Rubber latex (C) Blood (D) Sugar solution

Description : An ideal plastic substance indicates no deformation, when stressed upto yield stress, but behaves like a Newtonian fluid beyond yield stress. Which of the following is an ideal plastic? (A) Sewage sludge (B) Rubber latex (C) Blood (D) Sugar solution

Last Answer : (A) Sewage sludge

At fully plastic twisting moment (a) only fibres at surface are stressed to yield point in shear (b) fibres at centre are stressed to yield point in shear (c) all fibres are stressed to yield point in shear (d) none of these

Description : At fully plastic twisting moment (a) only fibres at surface are stressed to yield point in shear (b) fibres at centre are stressed to yield point in shear (c) all fibres are stressed to yield point in shear (d) none of these

Last Answer : (c) all fibres are stressed to yield point in shear

The maximum net pressure intensity causing shear failure of soil, is known (A) Safe bearing capacity (B) Net safe bearing capacity (C) Net ultimate bearing capacity (D) Ultimate bearing capacity

Description : The maximum net pressure intensity causing shear failure of soil, is known (A) Safe bearing capacity (B) Net safe bearing capacity (C) Net ultimate bearing capacity (D) Ultimate bearing capacity

Last Answer : (C) Net ultimate bearing capacity

The maximum pressure which a soil can carry without shear failure, is called (A) Safe bearing capacity (B) Net safe bearing capacity (C) Net ultimate bearing capacity (D) Ultimate bearing capacity

Description : The maximum pressure which a soil can carry without shear failure, is called (A) Safe bearing capacity (B) Net safe bearing capacity (C) Net ultimate bearing capacity (D) Ultimate bearing capacity

Last Answer : (A) Safe bearing capacity

Pick up the correct statement from the following: (A) An unconfined compression test is a special case of triaxial compression test (B) An unconfined compression test is a special case of direct shear test (C) The confining pressure is maximum during an unconfined compression test (D) The cylindrical specimen of a soil is subjected to major principal stress till it fails due to shearing along the plane of the failure

Description : Pick up the correct statement from the following: (A) An unconfined compression test is a special case of triaxial compression test (B) An unconfined compression test is a special case of direct ... subjected to major principal stress till it fails due to shearing along the plane of the failure

Last Answer : Option A

Are logic, integrity, honesty overrated? Is that why they seem to be on the verge of extinction?

Description : Are logic, integrity, honesty overrated? Is that why they seem to be on the verge of extinction?

Last Answer : Logic, integrity and honesty are overrated when they get in the way of political agendas.

Why does my plant look like it's on the verge of death?

Description : Why does my plant look like it's on the verge of death?

Last Answer : answer:Ornamental pepper plants are annuals that grow best in warm areas., so I would guess that your plant has borne fruit and lived it's life, or Ornamental pepper plants are susceptible to ... prevent the spread of disease. Do not replace the plant with another ornamental pepper. Same source.

Are honey bees on the verge of extinction, if so will Professor Einstein's calculation prove to be true?

Description : Are honey bees on the verge of extinction, if so will Professor Einstein's calculation prove to be true?

Last Answer : answer:Honeybees aren't near extinction, they're just dying in large numbers, suddenly, and we don't know why. So they're being studied to find the cause. There are still a lot of bees and ... case of a useful quote's being invented and put into the mouth of a famous person for political purposes

Is the Oak Ridge, Tn. laboratory on the verge of a major discovery?

Description : Is the Oak Ridge, Tn. laboratory on the verge of a major discovery?

Last Answer : That would be a boon. Currently, I believe it’s only corn that can be used for ethanol.

Yu-Gi-Oh duelists of , how did you completely turn the tables on someone on the verge of certain victory?

Description : Yu-Gi-Oh duelists of , how did you completely turn the tables on someone on the verge of certain victory?

Last Answer : They were too cocky. You could have been me turns before but they kept prolonging things because they wanted to pull off summoning a special monster and needed more cards. It took so long it gave me the turns I needed to get better cards to beat him

To be or not to be? On the verge of despair.

Description : Hi, I need help. I'm only 13 (I'm a girl) and I can't go on ... My moms an ex-boyfriend I hated with all my heart and he also hit me and cursed me, beat my mom, he still annoys us, stalks us ... do anymore. when I kill myself, I hurt the people around me. Can you please advise me what to do? ...

Last Answer : Everything is solvable. Personally, I would start with myself.

A lady dropped her wallet in the parking lot of a super market. A boy picked the wallet up and ran towards the lady. He set off at 60° to the verge

Description : A lady dropped her wallet in the parking lot of a super market. A boy picked the wallet up and ran towards the lady. He set off at 60° to the verge

Last Answer : A lady dropped her wallet in the parking lot of a super market. A boy picked the wallet up ... of velocity of boy directly across the parking strip.

In case of a super-cooled solution, which is on the verge of crystallisation, the free energy of the solution as compared to that of the solid is (A) More (B) Less (C) Same (D) More or less; depends on the nature of solution

Description : In case of a super-cooled solution, which is on the verge of crystallisation, the free energy of the solution as compared to that of the solid is (A) More (B) Less (C) Same (D) More or less; depends on the nature of solution

Last Answer : (A) More

Which of the following conditions is to be satisfied both in elastic and plastic analyses? (a) Equilibrium condition (b) Yield condition (c ) Plastic moment condition (d) Mechanism condition

Description : Which of the following conditions is to be satisfied both in elastic and plastic analyses? (a) Equilibrium condition (b) Yield condition (c ) Plastic moment condition (d) Mechanism condition

Last Answer : (a) Equilibrium condition

The product of mass and acceleration of flowing liquid is called (A) Inertia force (B) Viscous force (C) Gravity force (D) Pressure force

Description : The product of mass and acceleration of flowing liquid is called (A) Inertia force (B) Viscous force (C) Gravity force (D) Pressure force

Last Answer : Answer: Option A

The velocity of the liquid flowing through the divergent portion of a Venturimeter (A) Remains constant (B) Increases (C) Decreases (D) Depends upon mass of liquid

Description : The velocity of the liquid flowing through the divergent portion of a Venturimeter (A) Remains constant (B) Increases (C) Decreases (D) Depends upon mass of liquid

Last Answer : Answer: Option C

The pressure of the liquid flowing through the divergent portion of a Venturimeter (A) Remains constant (B) Increases (C) Decreases (D) Depends upon mass of liquid

Description : The pressure of the liquid flowing through the divergent portion of a Venturimeter (A) Remains constant (B) Increases (C) Decreases (D) Depends upon mass of liquid

Last Answer : Answer: Option C

As per RBI said in its statement, banks have to seek whose permission before selling stake in stressed companies? A) GOI B) CVC C) RBI D) CBI E) Both B and D

Description : As per RBI said in its statement, banks have to seek whose permission before selling stake in stressed companies? A) GOI B) CVC C) RBI D) CBI E) Both B and D

Last Answer : E) Both B and D Explanation: Following the central bank s directive to banks to ensure that stake sales in stressed companies under the strategic debt restructuring (SDR) does not get ... the Central Vigilance Commission (CVC) before closing such deals, people familiar with the development said.

The material in which large deformation is possible before absolute failure by rupture takes place, is known as (a) Ductile (b) Plastic (c) Brittle (d) Elastic

Description : The material in which large deformation is possible before absolute failure by rupture takes place, is known as (a) Ductile (b) Plastic (c) Brittle (d) Elastic

Last Answer : Ductile

The firm is said to be in equilibrium when the difference between R and C is: A. Maximum B. Zero C. Minimum D. One

Description : The firm is said to be in equilibrium when the difference between R and C is: A. Maximum B. Zero C. Minimum D. One

Last Answer : ANSWER: A

A system is said to be at equilibrium, if the entropy of the system has reached __________ value. (A) Minimum (B) Zero (C) Maximum (D) None of these

Description : A system is said to be at equilibrium, if the entropy of the system has reached __________ value. (A) Minimum (B) Zero (C) Maximum (D) None of these

Last Answer : C) Maximum

Under perfect market conditions a firm is said to be in equilibrium where (a) Total output is equal to total demand ; (b) Profit is the maximum; (c) Where the total revenue is maximum ; (d) Where total average cost is the minimum

Description : Under perfect market conditions a firm is said to be in equilibrium where (a) Total output is equal to total demand ; (b) Profit is the maximum; (c) Where the total revenue is maximum ; (d) Where total average cost is the minimum

Last Answer : (b) Profit is the maximum; 

Under perfect market conditions an Industry is said to be in equilibrium where (a) Total output is equal to total demand ; (b) Profit is maximum (c) Where the total revenue is maximum ; (d) Where total average cost is the minimum

Description : Under perfect market conditions an Industry is said to be in equilibrium where (a) Total output is equal to total demand ; (b) Profit is maximum (c) Where the total revenue is maximum ; (d) Where total average cost is the minimum

Last Answer : (a) Total output is equal to total demand ;

A body is said to be in equilibrium if (A) It moves horizontally (B) It moves vertically (C) It rotates about its C.G. (D) None of these

Description : A body is said to be in equilibrium if  (A) It moves horizontally  (B) It moves vertically  (C) It rotates about its C.G.  (D) None of these 

Last Answer : (D) None of these 

11. If a body floating in a liquid does not return back to its original position and heels farther "away when given a small angular displacement, the body is said to be in neutral equilibrium. A) Yes B) No

Description : 11. If a body floating in a liquid does not return back to its original position and heels farther "away when given a small angular displacement, the body is said to be in neutral equilibrium. A) Yes B) No

Last Answer : B

06. A body floating in a liquid is said to be not in equilibrium if its metacentre lies below its centre of gravity. A) Agree B) Disagree

Description : 06. A body floating in a liquid is said to be not in equilibrium if its metacentre lies below its centre of gravity. A) Agree B) Disagree

Last Answer : A

04. A body floating in a liquid is said to be in a stable equilibrium, if its metacentre coincides with its centre of gravity. A) True B) False

Description : 04. A body floating in a liquid is said to be in a stable equilibrium, if its metacentre coincides with its centre of gravity. A) True B) False

Last Answer : B

If a body floating in a liquid returns back to its original position, when given a small angular displacement, the body is said to be in (A) Neutral equilibrium (B) Stable equilibrium (C) Unstable equilibrium (D) None of these

Description : If a body floating in a liquid returns back to its original position, when given a small angular displacement, the body is said to be in (A) Neutral equilibrium (B) Stable equilibrium (C) Unstable equilibrium (D) None of these

Last Answer : Answer: Option B

A submerged body is said to be in a stable equilibrium, if its centre of gravity __________ the centre of buoyancy. (A) Coincides with (B) Lies below (C) Lies above (D) None of these

Description : A submerged body is said to be in a stable equilibrium, if its centre of gravity __________ the centre of buoyancy. (A) Coincides with (B) Lies below (C) Lies above (D) None of these

Last Answer : Answer: Option B

A body floating in a liquid is said to be in neutral equilibrium, if its metacentre (A) Coincides with its centre of gravity (B) Lies above its centre of gravityC) Lies below its centre of gravity (D) Lies between the centre of buoyancy and centre of gravity

Description : A body floating in a liquid is said to be in neutral equilibrium, if its metacentre (A) Coincides with its centre of gravity (B) Lies above its centre of gravity C) Lies below its centre of gravity (D) Lies between the centre of buoyancy and centre of gravity

Last Answer : Answer: Option A

If a body floating in a liquid occupies a new position and remains at rest in this new position, when given a small angular displacement, the body is said to be in __________ equilibrium. (A) Neutral (B) Stable (C) Unstable (D) None of these

Description : If a body floating in a liquid occupies a new position and remains at rest in this new position, when given a small angular displacement, the body is said to be in __________ equilibrium. (A) Neutral (B) Stable (C) Unstable (D) None of these

Last Answer : Answer: Option A

At the center line of a pipe flowing under pressure where the velocity gradient is zero, the shear stress will be (A) Minimum (B) Maximum (C) Zero (D) Could be any value

Description : At the center line of a pipe flowing under pressure where the velocity gradient is zero, the shear stress will be (A) Minimum (B) Maximum (C) Zero (D) Could be any value

Last Answer : Answer: Option D

When a liquid is flowing through a pipe, the velocity of the liquid is (A) Maximum at the centre and minimum near the walls (B) Minimum at the centre and maximum near the walls (C) Zero at the centre and maximum near the walls (D) Maximum at the centre and zero near the walls

Description : When a liquid is flowing through a pipe, the velocity of the liquid is (A) Maximum at the centre and minimum near the walls (B) Minimum at the centre and maximum near the walls (C) Zero at the centre and maximum near the walls (D) Maximum at the centre and zero near the walls

Last Answer : Answer: Option A