Which of the following conditions is to be satisfied both in elastic and plastic analyses? (a) Equilibrium condition (b) Yield condition (c ) Plastic moment condition (d) Mechanism condition

Which of the following conditions is to be satisfied both in elastic and plastic analyses?
(a) Equilibrium condition (b) Yield condition
(c ) Plastic moment condition (d) Mechanism condition
by

1 Answer

Answer :

(a) Equilibrium condition
by

Related questions

Select incorrect statement from the following. In the Virtual work method, it is generally assumed that [ A ] Elastic deformations in the slab are negligible [ B ] Plastic deformations in the slab are negligible [ C ] Plastic deformations takes place at the yield lines [ D ] Both (a) and (b)

Description : Select incorrect statement from the following. In the Virtual work method, it is generally assumed that [ A ] Elastic deformations in the slab are negligible [ B ] Plastic deformations in the slab are negligible [ C ] Plastic deformations takes place at the yield lines [ D ] Both (a) and (b)

Last Answer : [ B ] Plastic deformations in the slab are negligible

At yield point of a test piece, the material (A) Obeys Hooke's law (B) Behaves in an elastic manner (C) Regains its original shape on removal of the load(D) Undergoes plastic deformation

Description : At yield point of a test piece, the material  (A) Obeys Hooke's law  (B) Behaves in an elastic manner  (C) Regains its original shape on removal of the load  (D) Undergoes plastic deformation 

Last Answer : (D) Undergoes plastic deformation 

Pick up the correct statement from the following: (A) In a loaded beam, the moment at which the first yield occurs is called yield moment(B) In a loaded beam, the moment at which the entire section of the beam becomes fully plastic, is called plastic moment (C) In a fully plastic stage of the beam, the neutral axis divides the section in two sections of equal area (D) All the above

Description : Pick up the correct statement from the following:  (A) In a loaded beam, the moment at which the first yield occurs is called yield moment (B) In a loaded beam, the moment at which the ... beam, the neutral axis divides the section in two sections of  equal area  (D) All the above 

Last Answer : (D) All the above 

Which one of the following is the correct ratio of plastic moment to yield moment for a simply supported beam of uniform square cross section throughout the span (a) 1.5 (b) 1.7 (c) 2.0 (d) 2.34

Description : Which one of the following is the correct ratio of plastic moment to yield moment for a simply supported beam of uniform square cross section throughout the span (a) 1.5 (b) 1.7 (c) 2.0 (d) 2.34

Last Answer : (a) 1.5

The moment capacity of section at plastic hinge equals a) Yield moment b) Zero c) Fully plastic moment d) Twice the yield moment

Description : The moment capacity of section at plastic hinge equals a) Yield moment b) Zero c) Fully plastic moment d) Twice the yield moment

Last Answer : c) Fully plastic moment

At ‘yield point’ of a copper wire A. the load hasn't exceeded the elastic limit yet; so, Hooke's law applies B. the load has already exceeded the elastic limit and the material has become plastic C. even the plastic stage has passed and the wire has snapped already D. Like Brass and Bronze, Copper has no yield poin

Description : At yield point' of a copper wire A. the load hasn't exceeded the elastic limit yet; so, Hooke's law applies B. the load has already exceeded the elastic limit and the material has become ... stage has passed and the wire has snapped already D. Like Brass and Bronze, Copper has no yield poin

Last Answer : the load has already exceeded the elastic limit and the material has become plastic

The limit beyond which the material does not behave elastically is known as (a) Proportional limit (b) Elastic limit (c) Plastic limit (d) Yield Point

Description : The limit beyond which the material does not behave elastically is known as (a) Proportional limit (b) Elastic limit (c) Plastic limit (d) Yield Point

Last Answer : (b) Elastic limit

The statement : stress is proportional to strain, i.e. the Hooke’s law holds good upto (a) Elastic Limit (b) Proportional Limit (c) Plastic Limit (d) Yield point

Description : The statement : stress is proportional to strain, i.e. the Hooke’s law holds good upto (a) Elastic Limit (b) Proportional Limit (c) Plastic Limit (d) Yield point

Last Answer : (b) Proportional Limit

The stress at which extension of a material takes place more quickly as compared to increase in load, is called (a) No elastic zone (b) Plastic point (c) Yield point (d) Breaking point

Description : The stress at which extension of a material takes place more quickly as compared to increase in load, is called (a) No elastic zone (b) Plastic point (c) Yield point (d) Breaking point

Last Answer : (c) Yield point

The number of independent equations to be satisfied for static equilibrium in a space structure is (A) 2 (B) 3 (C) 4 (D) 6

Description : The number of independent equations to be satisfied for static equilibrium in a space structure is (A) 2 (B) 3 (C) 4 (D) 6

Last Answer : (D) 6

The number of independent equations to be satisfied for static equilibrium of a plane structure is (A) 1 (B) 2 (C) 3 (D) 6

Description : The number of independent equations to be satisfied for static equilibrium of a plane structure is (A) 1 (B) 2 (C) 3 (D) 6

Last Answer : (C) 3

The number of independent equations to be satisfied for static equilibrium in a space structure is (a) 3 (b) 6 (c) 4 (d) 2

Description : The number of independent equations to be satisfied for static equilibrium in a space structure is (a) 3 (b) 6 (c) 4 (d) 2

Last Answer : 6

What is the purpose of the CAGE framework? a) The CAGE framework investigates to what extent home demand, home factor conditions and domestic rivalry are important to multinational firms. b) The CAGE framework analyses bilateral differences and commonalities between two countries. c) The CAGE framework is a broad framework to help managers understand the environment in which their business operates. d) The CAGE framework a checklist for forecasting political, economic, strategic or technological factors.

Description : What is the purpose of the CAGE framework? a) The CAGE framework investigates to what extent home demand, home factor conditions and domestic rivalry are important to multinational firms. ... d) The CAGE framework a checklist for forecasting political, economic, strategic or technological factors.

Last Answer : The CAGE framework analyses bilateral differences and commonalities between two countries.

At fully plastic twisting moment (a) only fibres at surface are stressed to yield point in shear (b) fibres at centre are stressed to yield point in shear (c) all fibres are stressed to yield point in shear (d) none of these

Description : At fully plastic twisting moment (a) only fibres at surface are stressed to yield point in shear (b) fibres at centre are stressed to yield point in shear (c) all fibres are stressed to yield point in shear (d) none of these

Last Answer : (c) all fibres are stressed to yield point in shear

Yield line theory results in [ A ] Elastic solution [ B ] Lower bound solution [ C ] Upper bound solution [ D ] Unique solution

Description : Yield line theory results in [ A ] Elastic solution [ B ] Lower bound solution [ C ] Upper bound solution [ D ] Unique solution

Last Answer : [ B ] Lower bound solution

Yield line analysis by equilibrium method gives ------------------ to that of obtained by virtual work method [ A ] Equal values [ B ] Lesser values [ C ] Higher values [ D ] None of the above.

Description : Yield line analysis by equilibrium method gives ------------------ to that of obtained by virtual work method [ A ] Equal values [ B ] Lesser values [ C ] Higher values [ D ] None of the above.

Last Answer : [ A ] Equal values

Equilibrium relates to which of these (a) Market condition which oscillate ; (b) Market state of falling price; (c) Market condition of rising price ; (d) Market conditions which once achieved tends to persist

Description : Equilibrium relates to which of these (a) Market condition which oscillate ; (b) Market state of falling price; (c) Market condition of rising price ; (d) Market conditions which once achieved tends to persist

Last Answer :  (d) Market conditions which once achieved tends to persist

The shafts will have same strength on the basis of torsional rigidity, if (A) Diameter and length of both shafts is same (B) Material of both shafts is same (C) Angle of twist for both shafts is same (D) All of above conditions are satisfied

Description : The shafts will have same strength on the basis of torsional rigidity, if (A) Diameter and length of both shafts is same (B) Material of both shafts is same (C) Angle of twist for both shafts is same (D) All of above conditions are satisfied

Last Answer : (D) All of above conditions are satisfied

The shafts will have same strength on the basis of torsional rigidity, if (a) diameter and length of both shafts is same (b) material of both shafts is same (c) angle of twist for both shafts is same (d) all of above conditions are satisfied

Description : The shafts will have same strength on the basis of torsional rigidity, if (a) diameter and length of both shafts is same (b) material of both shafts is same (c) angle of twist for both shafts is same (d) all of above conditions are satisfied

Last Answer : (d) all of above conditions are satisfied

What is known about the native population of New Zealand at present? (A) The natives are quite satisfied with their living conditions. (B) The natives live on good lands. (C) Both in the cities and in the rural areas, the life of the natives is worse than that of the European New Zealanders. (D) The natives are never at peace with the other New Zealanders.

Description : What is known about the native population of New Zealand at present? (A) The natives are quite satisfied with their living conditions. (B) The natives live on good lands. (C) Both in the cities ... of the European New Zealanders. (D) The natives are never at peace with the other New Zealanders. 

Last Answer : (C) Both in the cities and in the rural areas, the life of the natives is worse than that of the European New Zealanders.

Every material obeys the Hooke's law within its (A) Elastic limit (B) Plastic point (C) Limit of proportionality (D) None of these

Description : Every material obeys the Hooke's law within its (A) Elastic limit (B) Plastic point (C) Limit of proportionality (D) None of these

Last Answer : (C) Limit of proportionality

A member which does not regain its original shape after removed of load producing deformation is said (A) Plastic (B) Elastic (C) Rigid (D) None of these

Description : A member which does not regain its original shape after removed of load producing deformation is said (A) Plastic (B) Elastic (C) Rigid (D) None of these

Last Answer : (A) Plastic

The stress at which extension of a material takes place more quickly as compared to the increase in load, is called (A) Elastic point (B) Plastic point (C) Breaking point (D) Yielding point

Description : The stress at which extension of a material takes place more quickly as compared to the increase in load, is called (A) Elastic point (B) Plastic point (C) Breaking point (D) Yielding point

Last Answer : (D) Yielding point

For structural analysis, Maxwell's reciprocal theorem can be applied to: (A) Plastic structures (B) Elastic structures (C) Symmetrical structures (D) All the above

Description : For structural analysis, Maxwell's reciprocal theorem can be applied to: (A) Plastic structures (B) Elastic structures (C) Symmetrical structures (D) All the above

Last Answer : (B) Elastic structures

Cohesive soils are generally (A) Plastic and also compressible (B) Elastic and also compressible (C) Plastic but incompressible (D) None of these

Description : Cohesive soils are generally (A) Plastic and also compressible (B) Elastic and also compressible (C) Plastic but incompressible (D) None of these

Last Answer : (A) Plastic and also compressible

Terzaghi's analysis assumes: (A) Soil is homogeneous and isotropic (B) Elastic zone has straight boundaries inclined at = to the horizontal and plastic zones fully developed (C) Failure zones do not extend above the horizontal plane through the base of the footing (D) All the above

Description : Terzaghi's analysis assumes: (A) Soil is homogeneous and isotropic (B) Elastic zone has straight boundaries inclined at = to the horizontal and plastic zones fully developed (C) Failure zones do not extend above the horizontal plane through the base of the footing (D) All the above

Last Answer : Answer: Option D

The material in which large deformation is possible before absolute failure by rupture takes place, is known as (a) Ductile (b) Plastic (c) Brittle (d) Elastic

Description : The material in which large deformation is possible before absolute failure by rupture takes place, is known as (a) Ductile (b) Plastic (c) Brittle (d) Elastic

Last Answer : Ductile

Creep coefficient is the ratio of [ A ] Ultimate Creep strain to elastic strain [ B ] Elastic strain to ultimate Creep strain [ C ] Elastic strain to plastic strain [ D ] Plastic strain to elastic strain

Description : Creep coefficient is the ratio of [ A ] Ultimate Creep strain to elastic strain [ B ] Elastic strain to ultimate Creep strain [ C ] Elastic strain to plastic strain [ D ] Plastic strain to elastic strain

Last Answer : [ A ] Ultimate Creep strain to elastic strain

Theories of elastic failure while dealing with brittle materials consider the failure criterion as (a) Ultimate stress (b) Yield stress (c) Both ultimate and yield stress (d) None

Description : Theories of elastic failure while dealing with brittle materials consider the failure criterion as (a) Ultimate stress (b) Yield stress (c) Both ultimate and yield stress (d) None

Last Answer : (a) Ultimate stress

Theories of elastic failure while dealing with ductile materials consider the failure criterion as (a) Ultimate stress (b) Yield stress (c) Both ultimate and yield stress (d) None

Description : Theories of elastic failure while dealing with ductile materials consider the failure criterion as (a) Ultimate stress (b) Yield stress (c) Both ultimate and yield stress (d) None

Last Answer : (b) Yield stress

The necessary condition for forces to be in equilibrium is that these should be (A) Coplanar (B) Meet at one point (C) Both (A) and (B) above (D) All be equal

Description : The necessary condition for forces to be in equilibrium is that these should be (A) Coplanar (B) Meet at one point (C) Both (A) and (B) above (D) All be equal

Last Answer : (C) Both (A) and (B) above

The ratio of lateral strain to axial strain of a homogeneous material, is known (A) Yield ratio (B) Hooke's ratio (C) Poisson's ratio (D) Plastic ratio

Description : The ratio of lateral strain to axial strain of a homogeneous material, is known  (A) Yield ratio  (B) Hooke's ratio  (C) Poisson's ratio  (D) Plastic ratio 

Last Answer : (C) Poisson's ratio 

The number of plastic hinges required in a structure of indeterminate status for a ‘mechanism’ to develop is (a) i (b) i + 1 ( c) i + 2 (d) i – 1 Where ‘i' is the degree of indeterminacy

Description : The number of plastic hinges required in a structure of indeterminate status for a ‘mechanism’ to develop is (a) i (b) i + 1 ( c) i + 2 (d) i – 1 Where ‘i' is the degree of indeterminacy

Last Answer : (b) i + 1

Are you satisfied with the condition of the roads?

Description : The condition of the roads.

Last Answer : We have relatively good roads

What is the condition to be satisfied in the selection of L and C in a series inverter?

Description : What is the condition to be satisfied in the selection of L and C in a series inverter?

Last Answer : R2< 4LC

State the condition to be satisfied before connecting two alternators in parallel

Description : State the condition to be satisfied before connecting two alternators in parallel

Last Answer : The following are the three conditions to be satisfied by synchronizing the additional Alternator with the existing one or the common bus-bars. · The terminal voltage magnitude of the incoming ... incoming Alternator voltage must be the same as the bus-bar voltage. . Zero phase difference

Which of the following condition should be satisfied in the design of a vibration absorber ? A) Natural frequency of the auxiliary system should be equal to the natural frequency of the main system B) Natural frequency of the auxiliary system should be equal to the half natural frequency of the main systemC) Natural frequency of the auxiliary system should be fall in between natural frequency of the main system and the frequency of excitation D) Natural frequency of the auxiliary system should be twice natural frequency of the main system

Description : Which of the following condition should be satisfied in the design of a vibration absorber ? A) Natural frequency of the auxiliary system should be equal to the natural frequency of the main ... D) Natural frequency of the auxiliary system should be twice natural frequency of the main system

Last Answer : A) Natural frequency of the auxiliary system should be equal to the natural frequency of the main system

For total internal reflection to occur, which condition must be satisfied? a) N1 = N2 b) N1 > N2 c) N1 < N2 d) N1 x N2=1

Description : For total internal reflection to occur, which condition must be satisfied? a) N1 = N2 b) N1 > N2 c) N1 < N2 d) N1 x N2=1

Last Answer : b) N1 > N2

For a dielectric, the condition to be satisfied is a) σ/ωε > 1 b) σ/ωε < 1 c) σ = ωε d) ωε = 1

Description : For a dielectric, the condition to be satisfied is a) σ/ωε > 1 b) σ/ωε < 1 c) σ = ωε d) ωε = 1

Last Answer : b) σ/ωε < 1

Let G(x) be the generator polynomial used for CRC checking. What is the condition that should be satisfied by G(x) to detect odd number of bits in error? a. G(x) contains more than two terms b. G(x) does not divide 1+x^k, for any k not exceeding the frame length c. 1+x is a factor of G(x) d. G(x) has an odd number of terms

Description : Let G(x) be the generator polynomial used for CRC checking. What is the condition that should be satisfied by G(x) to detect odd number of bits in error? a. G(x) contains more than two terms b. G(x) does ... exceeding the frame length c. 1+x is a factor of G(x) d. G(x) has an odd number of terms

Last Answer : c. 1+x is a factor of G(x)

Let G(x) be generator polynomial used for CRC checking. The condition that should be satisfied by G(x) to correct odd numbered error bits, will be: (1) (1+x) is factor of G(x) (2) (1-x) is factor of G(x) (3) (1+x2) is factor of G(x) (4) x is factor of G(x)

Description : Let G(x) be generator polynomial used for CRC checking. The condition that should be satisfied by G(x) to correct odd numbered error bits, will be: (1) (1+x) is factor of G(x) (2) (1-x) is factor of G(x) (3) (1+x2) is factor of G(x) (4) x is factor of G(x)

Last Answer : (1+x) is factor of G(x)

The yield moment of a cross section is defined as the moment that will just produce the yield stress in (A) The outer most fibre of the section (B) The inner most fibre of the section (C) The neutral fibre of the section (D) The fibre everywhere

Description : The yield moment of a cross section is defined as the moment that will just produce the yield  stress in  (A) The outer most fibre of the section  (B) The inner most fibre of the section  (C) The neutral fibre of the section  (D) The fibre everywhere 

Last Answer : (A) The outer most fibre of the section 

The yield line ultimate moment is obtained when the yield line is --------------- to the direction of the reinforcement [ A ] Parallel [ B ] At right angles. [ C ] Passes through [ D ] Crosses at an angle of 45°

Description : The yield line ultimate moment is obtained when the yield line is --------------- to the direction of the reinforcement [ A ] Parallel [ B ] At right angles. [ C ] Passes through [ D ] Crosses at an angle of 45°

Last Answer : [ B ] At right angles.

Ponchon-Savarit method analyses the fractional equipment based on (A) Enthalpy balance only (B) Material balance only (C) Both enthalpy and material balances (D) The assumption of constant molal-overflow

Description : Ponchon-Savarit method analyses the fractional equipment based on (A) Enthalpy balance only (B) Material balance only (C) Both enthalpy and material balances (D) The assumption of constant molal-overflow

Last Answer : (C) Both enthalpy and material balances

In non-cohesive soil in passive state of plastic equilibrium (A) Major principal stress is horizontal (B) Minor principal stress is vertical (C) Major principal stress is vertical (D) Minor and major principal stresses are equally inclined to the horizontal

Description : In non-cohesive soil in passive state of plastic equilibrium (A) Major principal stress is horizontal (B) Minor principal stress is vertical (C) Major principal stress is vertical (D) Minor and major principal stresses are equally inclined to the horizontal

Last Answer : (B) Minor principal stress is vertical

A soil mass is said to be in plastic equilibrium if (A) It is stressed to maximum (B) It is on the verge of failure (C) It is in plastic stage (D) It starts flowing

Description : A soil mass is said to be in plastic equilibrium if (A) It is stressed to maximum (B) It is on the verge of failure (C) It is in plastic stage (D) It starts flowing

Last Answer : Answer: Option B

In active state of plastic equilibrium in a non cohesive soil with horizontal ground surface (A) Major principal stress is horizontal (B) Minor principal stress is vertical (C) Major principal stress is vertical (D) Minor and major principal stresses are equally inclined to horizontal

Description : In active state of plastic equilibrium in a non cohesive soil with horizontal ground surface (A) Major principal stress is horizontal (B) Minor principal stress is vertical (C) Major principal stress is vertical (D) Minor and major principal stresses are equally inclined to horizontal

Last Answer : Answer: Option C

The major principal stress in an element of cohesion-less soil within the backfill of a retaining wall is (A) Vertical if the soil is in an active state of plastic equilibrium (B) Vertical if the soil is in a passive state of plastic equilibrium (C) Inclined at 45° to the vertical plane (D) None of the above

Description : The major principal stress in an element of cohesion-less soil within the backfill of a retaining wall is (A) Vertical if the soil is in an active state of plastic equilibrium (B) Vertical if the ... state of plastic equilibrium (C) Inclined at 45° to the vertical plane (D) None of the above

Last Answer : Answer: Option A

In the impact problems the following conditions must always be satisfied a.The total kinetic energy remains unchanged b.The total linear momentum remains unchanged c.The magnitude of the total linear momentum is multiplied by the coefficient of restitution d.The kinetic energy of the system is reduced by a factor proportional to the coefficient of restitution e.None of the above

Description : In the impact problems the following conditions must always be satisfied a.The total kinetic energy remains unchanged b.The total linear momentum remains unchanged c.The magnitude of the total linear ... is reduced by a factor proportional to the coefficient of restitution e.None of the above

Last Answer : b. The total linear momentum remains unchanged

The Tyndall effect is observed only when following conditions are satisfied : (a) The diameter of the dispersed particles is much smaller than the wav

Description : The Tyndall effect is observed only when following conditions are satisfied : (a) The diameter of the dispersed particles is much smaller than the wav

Last Answer : The Tyndall effect is observed only when following conditions are satisfied : (a) The diameter of the dispersed particles ... ) and (c) D. (a) and (d)