Choose the wrong statement (A) Fluids are capable of flowing (B) Fluids conform to the shape of the containing vessels (C) When in equilibrium, fluids cannot sustain tangential forces (D) When in equilibrium, fluids can sustain shear forces

Choose the wrong statement
(A) Fluids are capable of flowing
(B) Fluids conform to the shape of the containing vessels
(C) When in equilibrium, fluids cannot sustain tangential forces
(D) When in equilibrium, fluids can sustain shear forces
by

1 Answer

Answer :

Answer: Option D
by

Related questions

A fluid in equilibrium can't sustain (A) Tensile stress (B) Compressive stress (C) Shear stress (D) Bending stress

Description : A fluid in equilibrium can't sustain (A) Tensile stress (B) Compressive stress (C) Shear stress (D) Bending stress

Last Answer : Answer: Option C

A fluid in equilibrium cannot sustain :

Description : A fluid in equilibrium cannot sustain : (A) tensile stress (B) compressive stress (C) shear stress (D) bending stress

Last Answer : A fluid in equilibrium cannot sustain : shear stress 

Pick out the wrong statement. (A) The shear stress at the pipe (dia = D, length = L) wall in case of laminar flow of Newtonian fluids is (D/4L). ∆p (B) In the equation, T. gc = k. (du/dy) n the value of 'n' for pseudoplastic and Dilatant fluid are < 1 and >1 respectively (C) Shear stress for Newtonian fluid is proportional to the rate of shear in the direction perpendicular to motion (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

Description : Pick out the wrong statement. (A) The shear stress at the pipe (dia = D, length = L) wall in case of laminar flow of Newtonian fluids is (D/4L). ∆p (B) In the equation, T. gc = k. ... to motion (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

Last Answer : (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

Fluid is a substance that (A) Cannot be subjected to shear forces (B) Always expands until it fills any container (C) Has the same shear stress at a point regardless of its motion (D) Cannot remain at rest under action of any shear force

Description : Fluid is a substance that (A) Cannot be subjected to shear forces (B) Always expands until it fills any container (C) Has the same shear stress at a point regardless of its motion (D) Cannot remain at rest under action of any shear force

Last Answer : Answer: Option D

Choose the wrong statement (A) The center of buoyancy is located at the center of gravity of the displaced liquid (B) For stability of a submerged body, the center of gravity of body must lie directly below the center of buoyancy (C) If C.G. and center of buoyancy coincide, the submerged body must lie at neutral equilibrium for all positions (D) All floating bodies are stable

Description : Choose the wrong statement (A) The center of buoyancy is located at the center of gravity of the displaced liquid (B) For stability of a submerged body, the center of gravity of body must ... the submerged body must lie at neutral equilibrium for all positions (D) All floating bodies are stable

Last Answer : Answer: Option D

Pick out the wrong statement. (A) Momentum transfer in laminar flow results from velocity gradient (B) A fluid in equilibrium is not free from shear stress (C) The viscosity of a non-Newtonian fluid is a function of temperature only (D) Both (B) and (C)

Description : Pick out the wrong statement. (A) Momentum transfer in laminar flow results from velocity gradient (B) A fluid in equilibrium is not free from shear stress (C) The viscosity of a non-Newtonian fluid is a function of temperature only (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Pick out the wrong statement. (A) Minimum number of degree of freedom of a system is zero (B) Degree of freedom of a system containing a gaseous mixture of helium, carbon dioxide and hydrogen is 4 (C) For a two phase system in equilibrium made up of fourchemical species, the number of degrees of freedom is 4 (D) Enthalpy and internal energy change is zero during phase change processes like melting, vaporisation and sublimation

Description : Pick out the wrong statement. (A) Minimum number of degree of freedom of a system is zero (B) Degree of freedom of a system containing a gaseous mixture of helium, carbon ... ) Enthalpy and internal energy change is zero during phase change processes like melting, vaporisation and sublimation

Last Answer : (D) Enthalpy and internal energy change is zero during phase change processes like melting, vaporisation and sublimation

Pick out the wrong statement. (A) The disintegration rate of a radioactive substance cannot be increased by heating it (B) Electrons have negligible mass and unit negative change (C) Deuterium atom has one proton and two neutrons in its nucleus (D) Cadmium is capable of absorbing neutrons

Description : Pick out the wrong statement. (A) The disintegration rate of a radioactive substance cannot be increased by heating it (B) Electrons have negligible mass and unit negative change (C) Deuterium atom has one proton and two neutrons in its nucleus (D) Cadmium is capable of absorbing neutrons

Last Answer : (C) Deuterium atom has one proton and two neutrons in its nucleus

Poise is the unit of (A) Surface tension (B) Capillarity (C) Viscosity (D) Shear stress in fluids

Description : Poise is the unit of (A) Surface tension (B) Capillarity (C) Viscosity (D) Shear stress in fluids

Last Answer : Answer: Option C

Choose the wrong statement (a) Temperature of medium being cooled must be below that of the evaporator (b) Refrigerant leaves the condenser as liquid (c) All solar thermally operated absorption systems are capable only of intermittent operation (d) frost on evaporator reduces heat transfer

Description : Choose the wrong statement (a) Temperature of medium being cooled must be below that of the evaporator (b) Refrigerant leaves the condenser as liquid (c) All solar thermally operated absorption systems are capable only of intermittent operation (d) frost on evaporator reduces heat transfer

Last Answer : Ans: a

Which of the following formulae is used to calculate tangential stress, when a member is subjected to stress in mutually perpendicular axis and accompanied by a shear stress? a. [(σ x – σ y )/2 ]sin θ – τ cos 2θ b. [(σ x – σ y )/2 ]– τ cos 2θ c. [(σ x – σ y )/2 ]sin θ – τ 2 cos θ d. None of the above

Description : Which of the following formulae is used to calculate tangential stress, when a member is subjected to stress in mutually perpendicular axis and accompanied by a shear stress? a. [(σ x - σ y )/2 ]sin θ - τ cos 2θ b. [(σ x - ... τ cos 2θ c. [(σ x - σ y )/2 ]sin θ - τ 2 cos θ d. None of the above

Last Answer : c. [(σ x – σ y )/2 ]sin θ – τ 2 cos θ

Shear stress in the beam acting on the cross section is (a) Normal to the cross section (b) Tangential to the cross section (c) Neither normal nor tangential (d) None

Description : Shear stress in the beam acting on the cross section is (a) Normal to the cross section (b) Tangential to the cross section (c) Neither normal nor tangential (d) None

Last Answer : b) Tangential to the cross section

The minimum liquid rate to be used in an absorber corresponds to an operating line (A) Of slope = 1 (B) Of slope = 0.1 (C) Tangential to the equilibrium curve (D) None of these

Description : The minimum liquid rate to be used in an absorber corresponds to an operating line (A) Of slope = 1 (B) Of slope = 0.1 (C) Tangential to the equilibrium curve (D) None of these

Last Answer : (C) Tangential to the equilibrium curve

When mild steel is subjected to a tensile load, its fracture will conform to (a) Star shape (b) Granular shape (c) Cup and cone shape (d) Fibrous shape

Description : When mild steel is subjected to a tensile load, its fracture will conform to (a) Star shape (b) Granular shape (c) Cup and cone shape (d) Fibrous shape

Last Answer : (c) Cup and cone shape

Froude number is significant in (A) Supersonics, as with projectile and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion through two fluids where there is a surface of discontinuity, gravity forces, and wave making effect, as with ship's hulls (D) All of the above

Description : Froude number is significant in (A) Supersonics, as with projectile and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion ... gravity forces, and wave making effect, as with ship's hulls (D) All of the above

Last Answer : Answer: Option C

Reynolds number is significant in (A) Supersonics, as with projectile and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion through two fluids where there is a surface of discontinuity, gravity forces, and wave making effect, as with ship's hulls (D) All of the above

Description : Reynolds number is significant in (A) Supersonics, as with projectile and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion ... gravity forces, and wave making effect, as with ship's hulls (D) All of the above

Last Answer : Answer: Option B

Which is the correct statement about law of polygon of forces? (A) If any number of forces acting at a point can be represented by the sides of a polygon taken in order, then the forces are in equilibrium (B) If any number of forces acting at a point can be represented in direction and magnitude by the sides of a polygon, then the forces are in equilibrium (C) If a polygon representing forces acting at a point is closed then forces are in equilibrium (D) If any number of forces acting at a point can be represented in direction and magnitude by the sides of a polygon taken in order, then the forces are in equilibrium

Description : Which is the correct statement about law of polygon of forces?  (A) If any number of forces acting at a point can be represented by the sides of a polygon taken  in order, then the ... direction and magnitude by  the sides of a polygon taken in order, then the forces are in equilibrium 

Last Answer : (D) If any number of forces acting at a point can be represented in direction and magnitude by  the sides of a polygon taken in order, then the forces are in equilibrium 

Two fluids are flowing through two similar pipes of the same diameter. The Reynold's number is same. For the same flow rate if the viscosity of a fluid is reduced to half the value of the first fluid, the pressure drop will (A) Increase (B) Decrease (C) Remain unchanged (D) Data insufficient to predict relative pressure drop

Description : Two fluids are flowing through two similar pipes of the same diameter. The Reynold's number is same. For the same flow rate if the viscosity of a fluid is reduced to half the value of the ... (A) Increase (B) Decrease (C) Remain unchanged (D) Data insufficient to predict relative pressure drop

Last Answer : (B) Decrease

The ratio of average values of shear stresses produced on the bed and the banks of a channel due to flowing water is (A) Less than 1 (B) Equal to 1 (C) Greater than 1 (D) Equal to zero

Description : The ratio of average values of shear stresses produced on the bed and the banks of a channel due to flowing water is (A) Less than 1 (B) Equal to 1 (C) Greater than 1 (D) Equal to zero

Last Answer : Answer: Option C

At the center line of a pipe flowing under pressure where the velocity gradient is zero, the shear stress will be (A) Minimum (B) Maximum (C) Zero (D) Could be any value

Description : At the center line of a pipe flowing under pressure where the velocity gradient is zero, the shear stress will be (A) Minimum (B) Maximum (C) Zero (D) Could be any value

Last Answer : Answer: Option D

A soil mass is said to be in plastic equilibrium if (A) It is stressed to maximum (B) It is on the verge of failure (C) It is in plastic stage (D) It starts flowing

Description : A soil mass is said to be in plastic equilibrium if (A) It is stressed to maximum (B) It is on the verge of failure (C) It is in plastic stage (D) It starts flowing

Last Answer : Answer: Option B

Pick up the correct statement from the following: Method of sawing timber (A) Tangentially to annual rings, is known as tangential method (B) In four quarters such that each board cuts annual rings at angles not less than 45°, is known as quarter sawing method (C) Cut out of quarter logs, parallel to the medullary rays and perpendicular to annual rings, is known as radial sawing (D) All the above

Description : Pick up the correct statement from the following: Method of sawing timber (A) Tangentially to annual rings, is known as tangential method (B) In four quarters such that each board cuts annual rings ... medullary rays and perpendicular to annual rings, is known as radial sawing (D) All the above

Last Answer : Answer: Option D

__________ stress cannot be sustained by a fluid in equilibrium. (A) Shear (B) Tensile (C) Compressive

Description : __________ stress cannot be sustained by a fluid in equilibrium. (A) Shear (B) Tensile (C) Compressive

Last Answer : Option A

Pick out the wrong statement. (A) Different solids have different equilibrium moisture curves (B) Total condenser or reboiler is considered equivalent to one theoretical plate in McCabe-Thiele method of theoretical plate calculation for distillation column (C) Heat removal load on cooler remains constant, even with increase of the reflux ratio in a distillation column (D) Even a forced draft cooling tower cannot cool water below the wet bulb temperature

Description : Pick out the wrong statement. (A) Different solids have different equilibrium moisture curves (B) Total condenser or reboiler is considered equivalent to one theoretical plate in McCabe-Thiele method of ... (D) Even a forced draft cooling tower cannot cool water below the wet bulb temperature

Last Answer : (C) Heat removal load on cooler remains constant, even with increase of the reflux ratio in a distillation column

Which stage of shock is best described as that stage when the mechanisms that regulate blood pressure fail to sustain a systolic pressure above 90 mm Hg? a) Progressive In the progressive stage of shock, the mechanisms that regulate blood pressure can no longer compensate, and the mean arterial pressure falls below normal limits. b) Refractory The refractory or irreversible stage of shock represents the point at which organ damage is so severe that the patient does not respond to treatment and cannot survive.

Description : Which stage of shock is best described as that stage when the mechanisms that regulate blood pressure fail to sustain a systolic pressure above 90 mm Hg? a) Progressive In the progressive stage of ... which organ damage is so severe that the patient does not respond to treatment and cannot survive.

Last Answer : a) Progressive In the progressive stage of shock, the mechanisms that regulate blood pressure can no longer compensate, and the mean arterial pressure falls below normal limits.

The emergency electrical power source on tank vessels over 500 GT on an international voyage, should be capable of continuous operation under emergency load for _____________. A. 6 hours B. 12 hours C. 18 hours D. 24 hours

Description : The emergency electrical power source on tank vessels over 500 GT on an international voyage, should be capable of continuous operation under emergency load for _____________. A. 6 hours B. 12 hours C. 18 hours D. 24 hours

Last Answer : Answer: C

Buoys which support the cables to which vessels are attached are of (A) Cylindrical shape (B) Pear shaped (C) Spherical shape (D) All of these

Description : Buoys which support the cables to which vessels are attached are of (A) Cylindrical shape (B) Pear shaped (C) Spherical shape (D) All of these

Last Answer : (D) All of these

With increase in the shear rate, the apparent viscosity of pseudo-plastic fluids (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on the magnitude of shear rate

Description : With increase in the shear rate, the apparent viscosity of pseudo-plastic fluids (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on the magnitude of shear rate

Last Answer : (B) Decreases

Potential flow is the flow of (A) Compressible fluids with shear (B) Compressible fluids with no shear (C) Incompressible fluids with shear (D) Incompressible fluids with no shear

Description : Potential flow is the flow of (A) Compressible fluids with shear (B) Compressible fluids with no shear (C) Incompressible fluids with shear (D) Incompressible fluids with no shear

Last Answer : (D) Incompressible fluids with no shear

Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for counter flow and parallel flow can be theoretically same when any one of the fluids (hot or cold fluid) passes through the heat exchanger at constant temperature (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs (D) Phase change in case of a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Description : Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for ... a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Last Answer : (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs

By applying the static equations i.e. H V M = 0, to a determinate structure, we may determine (A) Supporting reactions only (B) Shear forces only (C) Bending moments only (D) All the above

Description : By applying the static equations i.e. H V M = 0, to a determinate structure, we may  determine  (A) Supporting reactions only  (B) Shear forces only  (C) Bending moments only  (D) All the above

Last Answer : (D) All the above

At either end of a plane frame, maximum number of possible transverse shear forces, are (A) One (B) Two (C) Three (D) Four

Description : At either end of a plane frame, maximum number of possible transverse shear forces, are (A) One (B) Two (C) Three (D) Four

Last Answer : (A) One

When equal and opposite forces applied to a body, tend to elongate it, the stress so produced, is called (A) Shear stress (B) Compressive stress (C) Tensile stress (D) Transverse stress

Description : When equal and opposite forces applied to a body, tend to elongate it, the stress so produced, is called (A) Shear stress (B) Compressive stress (C) Tensile stress (D) Transverse stress

Last Answer : (C) Tensile stress

The shear force on a simply supported beam is proportional to (A) Displacement of the neutral axis (B) Sum of the forces (C) Sum of the transverse forces (D) Algebraic sum of the transverse forces of the section

Description : The shear force on a simply supported beam is proportional to (A) Displacement of the neutral axis (B) Sum of the forces (C) Sum of the transverse forces (D) Algebraic sum of the transverse forces of the section

Last Answer : (D) Algebraic sum of the transverse forces of the section

A member is balanced at its end by two inclined members carrying equal forces. For equilibrium the angle between the inclined bars must be (A) 3° (B) 45° (C) 90° (D) 120°

Description : A member is balanced at its end by two inclined members carrying equal forces. For equilibrium  the angle between the inclined bars must be  (A) 3°  (B) 45°  (C) 90°  (D) 120° 

Last Answer : (D) 120° 

According to law of triangle of forces (A) Three forces acting at a point will be in equilibrium (B) Three forces acting at a point can be represented by a triangle, each side being proportional to force (C) If three forces acting upon a particle are represented in magnitude and direction by the sides of a triangle, taken in order, they will be in equilibrium (D) If three forces acting at a point are in equilibrium, each force is proportional to the sine of the angle between the other two

Description : According to law of triangle of forces  (A) Three forces acting at a point will be in equilibrium  (B) Three forces acting at a point can be represented by a triangle, each side ... point are in equilibrium, each force is proportional to the sine of  the angle between the other two 

Last Answer : (C) If three forces acting upon a particle are represented in magnitude and direction by the  sides of a triangle, taken in order, they will be in equilibrium

If a rigid body is in equilibrium under the action of three forces, then (A) These forces are equal (B) The lines of action of these forces meet in a point (C) The lines of action of these forces are parallel (D) Both (B) and (C) above

Description : If a rigid body is in equilibrium under the action of three forces, then  (A) These forces are equal  (B) The lines of action of these forces meet in a point  (C) The lines of action of these forces are parallel  (D) Both (B) and (C) above

Last Answer : (D) Both (B) and (C) above

If three forces acting in different planes can be represented by a triangle, these will be in (A) Non-equilibrium (B) Partial equilibrium (C) Full equilibrium (D) None of the above

Description : If three forces acting in different planes can be represented by a triangle, these will be in  (A) Non-equilibrium  (B) Partial equilibrium  (C) Full equilibrium  (D) None of the above 

Last Answer : (A) Non-equilibrium 

According to principle of moments (A) If a system of coplanar forces is in equilibrium, then their algebraic sum is zero (B) If a system of coplanar forces is in equilibrium, then the algebraic sum of their moments about any point in their plane is zero (C) The algebraic sum of the moments of any two forces about any point is equal to moment of their resultant about the same point (D) Positive and negative couples can be balanced

Description : According to principle of moments  (A) If a system of coplanar forces is in equilibrium, then their algebraic sum is zero  (B) If a system of coplanar forces is in equilibrium, then the ... of  their resultant about the same point  (D) Positive and negative couples can be balanced

Last Answer : (C) The algebraic sum of the moments of any two forces about any point is equal to moment of  their resultant about the same point 

two forces acting at a joint are not along the straight line, then for the equilibrium of the joint (A) One of the forces must be zero (B) Each force must be zero (C) Forces must be equal and of the same sign (D) Forces must be equal in magnitude but opposite in sign

Description : two forces acting at a joint are not along the straight line, then for the equilibrium of the joint (A) One of the forces must be zero (B) Each force must be zero (C) Forces must be equal and of the same sign (D) Forces must be equal in magnitude but opposite in sign

Last Answer : (B) Each force must be zero

If three forces acting in one plane upon a rigid body, keep it in equilibrium, then they must either (A) Meet in a point (B) Be all parallel (C) At least two of them must meet (D) All the above are correct

Description : If three forces acting in one plane upon a rigid body, keep it in equilibrium, then they must either (A) Meet in a point (B) Be all parallel (C) At least two of them must meet (D) All the above are correct

Last Answer : (D) All the above are correct

The necessary condition for forces to be in equilibrium is that these should be (A) Coplanar (B) Meet at one point (C) Both (A) and (B) above (D) All be equal

Description : The necessary condition for forces to be in equilibrium is that these should be (A) Coplanar (B) Meet at one point (C) Both (A) and (B) above (D) All be equal

Last Answer : (C) Both (A) and (B) above

A number of forces acting at a point will be in equilibrium if (A) Their total sum is zero (B) Two resolved parts in two directions at right angles are equal (C) Sum of resolved parts in any two perpendicular directions are both zero (D) All of them are inclined equally

Description : A number of forces acting at a point will be in equilibrium if (A) Their total sum is zero (B) Two resolved parts in two directions at right angles are equal (C) Sum of resolved parts in any two perpendicular directions are both zero (D) All of them are inclined equally

Last Answer : (C) Sum of resolved parts in any two perpendicular directions are both zero

According to Lami's theorem (A) Three forces acting at a point will be in equilibrium (B) Three forces acting at a point can be represented by a triangle, each side being proportional to force (C) If three forces acting upon a particle are represented in magnitude and direction by the sides of a triangle, taken in order, they will be in equilibrium (D) If three forces acting at a point are in equilibrium, each force is proportional to the sine of the angle between the other two

Description : According to Lami's theorem (A) Three forces acting at a point will be in equilibrium (B) Three forces acting at a point can be represented by a triangle, each side being proportional to ... point are in equilibrium, each force is proportional to the sine of the angle between the other two

Last Answer : Answer: Option D

Centre of pressure of a plane surface of arbitrary shape immersed vertically in a static mass of fluid(A) Lies above the centroid of the plane surface(B) Is independent of the specific weight of the fluid(C) Is different for different fluids(D) Is at the centroid of the plane surface

Description : Centre of pressure of a plane surface of arbitrary shape immersed vertically in a static mass of fluid (A) Lies above the centroid of the plane surface (B) Is independent of the specific weight of the fluid (C) Is different for different fluids (D) Is at the centroid of the plane surface

Last Answer : (B) Is independent of the specific weight of the fluid

Not an example for actuator (a) Optical fiber (b) Shape memory alloys (c) Magneto-strictive materials (d) Electro-/Magneto-rheological fluids

Description : Not an example for actuator (a) Optical fiber (b) Shape memory alloys (c) Magneto-strictive materials (d) Electro-/Magneto-rheological fluids

Last Answer : (a) Optical fiber

The statement ---- if three forces acting at a point are in equilibrium, each force is proportional to the sine of the angle between the other two ---- is known as a.Law of polygon of forces b.D'Alembert's principle c.Newtons law of forces d.Lami's theorem e.Law of triangle of forces

Description : The statement ---- if three forces acting at a point are in equilibrium, each force is proportional to the sine of the angle between the other two ---- is known as a.Law of polygon of forces b.D'Alembert's principle c.Newtons law of forces d.Lami's theorem e.Law of triangle of forces

Last Answer : d. Lami's theorem

Principal planes are subjected to (A) Normal stresses only (B) Tangential stresses only (C) Normal stresses as well as tangential stresses (D) None of these

Description : Principal planes are subjected to  (A) Normal stresses only  (B) Tangential stresses only  (C) Normal stresses as well as tangential stresses  (D) None of these

Last Answer : (A) Normal stresses only

The locus of the end point of the resultant of the normal and tangential components of the stress on an inclined plane, is (A) Circle (B) Parabola (C) Ellipse (D) Straight line

Description : The locus of the end point of the resultant of the normal and tangential components of the stress  on an inclined plane, is  (A) Circle  (B) Parabola  (C) Ellipse  (D) Straight line 

Last Answer : (C) Ellipse