Description : Which one of the following clay mineral has the highest CEC? (A) Vermiculite (B) Montmorillonite (C) Kaolinite (D) Illite
Last Answer : (A) Vermiculite
Description : Which type of clay will adsorb more herbicide? a). Montmorillonite b). Illite c). Kaolinite d). b & c
Last Answer : a). Montmorillonite
Description : non expanding type mineral is — a. Vermiculite b. Illite c. Kaolinite d. Montmorillonite
Last Answer : c. Kaolinite
Description : Sand particles are made of (A) Rock minerals (B) Kaolinite (C) Illite (D) Montmorillonite
Last Answer : Answer: Option A
Description : Pick up the correct statement from the following: (A) Illite bond is weaker than Kaolinite bond (B) Illite bond is stronger than montmorillonite bond (C) Illite does not swell when wet (D) All the above
Last Answer : Answer: Option D
Description : The clay soil mainly consists of (A) Kaolinite (B) Montmorillonite (C) Vermiculite (D) All the above
Last Answer : (D) All the above
Description : In clay soil (A) Swelling and shrinkage characteristics prevail (B) Consolidation continues even after several years of construction (C) Differential settlement is generally prevalent (D) All the above
Description : Pick up the correct statement from the following: (A) Kaolinite is most stable clay (B) Kaolinite shows a very little sign of swelling on wetting (C) Kaolinite is also called China clay (D) All the above
Description : Black cotton soil is rich in a. Illite b. Kaolnite c. Montmorillonite d. Chlorite
Last Answer : c. Montmorillonite
Description : Pick up the clay soil group which does not swell when wet from the following: (A) Kaolinite group (B) Mite group (C) Vermiculite group (D) Montrorillonite group
Last Answer : (B) Mite group
Description : Pick up the in-correct statement from the following: The soils which contain montmorillonite minerals (A) Swell more when wet (B) Shrink more when dry (C) Possess high plasticity (D) Possess high coefficient of internal coefficient
Last Answer : (D) Possess high coefficient of internal coefficient
Description : Kaolinite, Halloysite and Dickite are
Last Answer : Ans. 1:1 type silicate clay minerals
Description : Montmorillonite clays adsorb more herbicide as compared to other clays due to a). Expanding lattices b). more surface area c). More negatively charged sites d). All
Last Answer : d). All
Description : Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more ... of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity
Last Answer : (D) High molecular weight polymers on dissolving gives solution of very low viscosity
Description : Gray King Assay and Swelling Index of a coal is a measure of its (A) Swelling characteristics (B) Abradability (C) Agglutinating properties (D) Resistance to impact breakage
Last Answer : (A) Swelling characteristics
Description : Black soil contains the clay mineral
Last Answer : Ans. Montmorillonite clay (2:1)
Description : Which of the following mineral is used in cement industry and plaster of paris? A. Marble B. China Clay C. Gypsum D. Fire Clay
Last Answer : ANSWER: C
Description : Which mineral is mostly found in northern and western mountains of Pakistan? A. Chromite B. Lime-stone C. China Clay D. Gypsum
Last Answer : ANSWER: B
Description : Which mineral is used in the making of high speed machines? A. Rock Salt B. Chromite C. China Clay D. Lunic Stone
Last Answer : ANSWER: D
Description : Which of the following mineral is used for food and in chemical industries? A. Fire Clay B. Chromite C. Rock Salt D. Gypsum
Description : The mineral weathering and clay formation are rapid where the climate is- (a) Warm and moist (b) Warm and dry (c) Cold and moist (d) Cold and dry
Last Answer : (c) Cold and moist
Description : High quality crop soil requires humus as a major component. Which of the following best describes the composition of humus w) fine sand particles x) decaying organic matter y) mineral like clay matter z) chemical fertilizers
Last Answer : ANSWER: X -- DECAYING ORGANIC MATTER
Description : Name the clay mineral produced by the alteration of potash feldspar which is also used in ceramics.
Last Answer : ANSWER: KAOLINITE
Description : In bridge widening projects, the method of stitching is normally employed for connecting existing deck to the new deck. What are the problems associated with this method in terms of shrinkage of concrete?
Last Answer : In the method of stitching, it is a normal practice to construct the widening part of the bridge at first and let it stay undisturbed for several months. After that, concreting will then be ... Stitching refers to formation of a segment of bridge deck between an existing bridge and a new bridge.
Description : The plasticity index is the numerical difference between (A) Liquid limit and plastic limit (B) Plastic limit and shrinkage limit (C) Liquid limit and shrinkage limit (D) None of these
Last Answer : (A) Liquid limit and plastic limit
Description : The maximum water content at which a reduction in water content does not cause a decrease in volume of a soil mass, is known (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Permeability limit
Last Answer : (C) Shrinkage limit
Description : The minimum water content at which the soil retains its liquid state and also possesses a small shearing strength against flowing, is known (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Permeability limit
Last Answer : (A) Liquid limit
Description : The minimum water content at which the soil just begins to crumble when rolled into threads 3 mm in diameter, is known (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Permeability limit
Last Answer : (B) Plastic limit
Description : The water content of soil, which represents the boundary between plastic state and liquid state, is known as (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Plasticity index
Description : The water content in a soil sample when it continues to loose weight without loosing the volume, is called (A) Shrinkage limit (B) Plastic limit (C) Liquid limit (D) Semi-solid limit
Description : Pick up the correct statement from the following: (A) In soils, the flow index indicates variation in shear strength with water content (B) Liquid limit minus plastic limit, is known as plasticity ... Plastic limit minus shrinkage limit, is known as shrinkage index of the soil (D) All the above
Description : Distribution reinforcement in a simply supported slab, is provided to distribute (A) Load (B) Temperature stress (C) Shrinkage stress (D) All the above
Description : As per IS : 1343, total shrinkage for a pre-tensioned beam, is (A) 3.0 × 10-2 (B) 3.0 × 10-3 (C) 3.0 × 10-5 (D) 3.5 × 10
Description : The transverse reinforcements provided at right angles to the main reinforcement (A) Distribute the load (B) Resist the temperature stresses (C) Resist the shrinkage stress (D) All the above
Description : After pre-stressing process is completed, a loss of stress is due to (A) Shrinkage of concrete (B) Elastic shortening of concrete (C) Creep of concrete (D) All the above
Description : If C is creep coefficient, f is original pre-stress in concrete, m is modular ratio, E is Young's modulus of steel and e is shrinkage strain, the combined effect of creep and shrinkage is: (A) (1 - C)mf - eE B) (C - 1)mf + eE (C) (C - 1)mf - eE (D) (1 - C)mf + eE
Last Answer : Answer: Option B
Description : A pre-stressed concrete member is preferred because (A) Its dimensions are not decided from the diagonal tensile stress (B) Large size of long beams carrying large shear force need not be adopted (C) Removal of cracks in the members due to shrinkage (D) All the above
Description : The function of an expansion joint in rigid pavements is to (A) Relieve warping stresses (B) Relieve shrinkage stresses (C) Resist stresses due to expansion (D) Allow free expansion
Description : Curing (A) Reduces the shrinkage of concrete (B) Preserves the properties of concrete (C) Prevents the loss of water by evaporation (D) All of the above
Last Answer : (D) All of the above
Description : The shrinkage of concrete (A) Is proportional to water content is the mix (B) Is proportional to cement concrete (C) Increases with age of concrete (D) All the above
Description : The effect of adding calcium chloride in concrete is (i) To increase shrinkage (ii) To decrease shrinkage (iii) To increase setting time (iv) To decrease setting time The correct answer is (A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)
Last Answer : (B) (i) and (iv)
Description : Approximate value of shrinkage strain in concrete, is (A) 0.003 (B) 0.0003 (C) 0.00003 (D) 0.0
Description : Shrinkage in concrete can be reduced by using (A) Low water cement ratio (B) Less cement in the concrete (C) Proper concrete mix (D) All the above
Description : Separation of coarse aggregates from mortar during transportation, is known (A) Bleeding (B) Creeping (C) Segregation (D) Shrinkage
Last Answer : Answer: Option C
Description : The property of the ingredients to separate from each other while placing the concrete is called (A) Segregation (B) Compaction (C) Shrinkage (D) Bulking
Description : As compared to ordinary Portland cement, use of pozzolana cement (A) Reduces workability (B) Increases bleeding (C) Increases shrinkage (D) Increases strength