The mechanism method and the statical method guide in estimating (a) The lower and upper bounds respectively on the strength of structure (b) The upper and lower bounds respectively on the strength of structure (c) The lower bound on the strength of structure (d) The upper bound on the strength of structure

The mechanism method and the statical method guide in estimating
(a) The lower and upper bounds respectively on the strength of structure
(b) The upper and lower bounds respectively on the strength of structure
(c) The lower bound on the strength of structure
(d) The upper bound on the strength of structure
by

1 Answer

Answer :

(b) The upper and lower bounds respectively on the strength of structure
by

Related questions

Virtual work method and equilibrium method gives ---------------- to the collapse load on the slab [ A ] Upper bound [ B ] Lower bound [ C ] Upper bound and lower bound respectively [ D ] None of the above.

Description : Virtual work method and equilibrium method gives ---------------- to the collapse load on the slab [ A ] Upper bound [ B ] Lower bound [ C ] Upper bound and lower bound respectively [ D ] None of the above.

Last Answer : [ A ] Upper bound

The assumed yield line pattern is to be correct when the lower bound solution ---------the upper bound solution [ A ] May be greater than [ B ] May be less than [ C ] Will coincide with [ D ] Must be less than

Description : The assumed yield line pattern is to be correct when the lower bound solution ---------the upper bound solution [ A ] May be greater than [ B ] May be less than [ C ] Will coincide with [ D ] Must be less than

Last Answer : [ C ] Will coincide with

Yield line theory results in [ A ] Elastic solution [ B ] Lower bound solution [ C ] Upper bound solution [ D ] Unique solution

Description : Yield line theory results in [ A ] Elastic solution [ B ] Lower bound solution [ C ] Upper bound solution [ D ] Unique solution

Last Answer : [ B ] Lower bound solution

Why is it upper bound and lower bound and not higher bound and lower bound?

Description : Why is it upper bound and lower bound and not higher bound and lower bound?

Last Answer : My first search revealed this is a mathematical concept. So you should direct this question to whoever first coined the term. The definition is below. https://www.mathsisfun.com/definitions/upper-bound.html

A structure is erected on an impervious clay whose thickness is 12 m. Drainage is possible both at upper and lower surfaces. Coefficient of consolidation is 0.015 cm2 per minute. For attaining 50% consolidation with a time factor 0.20, the number of days required (A) 3233 (B) 3123 (C) 33331 (D) 3313

Description : A structure is erected on an impervious clay whose thickness is 12 m. Drainage is possible both at upper and lower surfaces. Coefficient of consolidation is 0.015 cm2 per minute. For attaining 50% consolidation with a ... 20, the number of days required (A) 3233 (B) 3123 (C) 33331 (D) 3313

Last Answer : Answer: Option C

The 'centre line method' is specially adopted for estimating (A) Circular buildings (B) Hexagonal buildings (C) Octagonal buildings (D) All the above

Description : The 'centre line method' is specially adopted for estimating (A) Circular buildings (B) Hexagonal buildings (C) Octagonal buildings (D) All the above

Last Answer : (D) All the above

Pick up the correct statement regarding the centre line method of estimating a building (A) Product of the centre line of the walls and area of cross-section of any item, gives total quantity of the item (B) The centre line is worked out separately for different sections of walls of a building (C) The centre line length is reduced by half the layer of main wall joining the partition wall (D) All the above

Description : Pick up the correct statement regarding the centre line method of estimating a building (A) Product of the centre line of the walls and area of cross-section of any item, gives total quantity of the ... length is reduced by half the layer of main wall joining the partition wall (D) All the above

Last Answer : (D) All the above

belt of silk runs over two metal pulleys, one of which is surrounded by a hollow metal sphere. Two electrodes, in the form of comb-shaped rows of sharp metal points, are positioned respectively near to the bottom of the lower pulley and inside the sphere, over the upper pulley. The top electrode is connected to the sphere and the bottom one to the ground. A high DC potential is applied to the upper pulley. A simple version of which equipment is being described here?

Description : belt of silk runs over two metal pulleys, one of which is surrounded by a hollow metal sphere. Two electrodes, in the form of comb-shaped rows of sharp metal points, are positioned ... potential is applied to the upper pulley. A simple version of which equipment is being described here?

Last Answer : Van de Graaff generator.

The asymptotic upper bound solution of the recurrence relation given by T(n)= 2T(n/2)+n/log n is: (1) O(n2) (2) O(n log n) (3) O(n log log n) (4) O(log log n)

Description : The asymptotic upper bound solution of the recurrence relation given by T(n)= 2T(n/2)+n/log n is: (1) O(n2) (2) O(n log n) (3) O(n log log n) (4) O(log log n)

Last Answer : (3) O(n log log n) 

Which one of the following is wrong about Chara? (a) Upper oogonium and lower round antheridium (b) Globule and nucule present on the same plant (c) Upper antheridium and lower oogonium (d) Globule is male reproductive structure

Description : Which one of the following is wrong about Chara? (a) Upper oogonium and lower round antheridium (b) Globule and nucule present on the same plant (c) Upper antheridium and lower oogonium (d) Globule is male reproductive structure

Last Answer : (c) Upper antheridium and lower oogonium

A project planning methodology is any structured approach used to guide the project team during development of the project plan. What is an example of this methodology? 1. Standard forms or templates. 2. Upper management involvement 3. Functional work authorizations4. Stakeholders skills

Description : A project planning methodology is any structured approach used to guide the project team  during development of the project plan. What is an example of this methodology? 1. Standard forms or templates.  2. Upper management involvement  3. Functional work authorizations 4. Stakeholders skills

Last Answer : 1. Standard forms or templates.

Are hockey and baseball the only sports in which the spectators can keep the ball/puck if shot out of bounds?

Description : Are hockey and baseball the only sports in which the spectators can keep the ball/puck if shot out of bounds?

Last Answer : I don’t know what the chances are of a tennis ball landing in the audience, but I would think that people could keep these. They go thorough a lot of tennis balls in a match.

What's out of bounds when you are throwing a wedding shower?

Description : What's out of bounds when you are throwing a wedding shower?

Last Answer : nothing

How come all other gymnist can fall and jump out of bounds and mess shit up and still higher scores then the American girls?

Description : How come all other gymnist can fall and jump out of bounds and mess shit up and still higher scores then the American girls?

Last Answer : Obviously, that is not true since the Americans finished one and two in the all around. Let’s not be homers.

I am green all over, yet I know no bounds. If you turn me around a face you will see, being without me produces envy. What am I? -Riddles

Description : I am green all over, yet I know no bounds. If you turn me around a face you will see, being without me produces envy. What am I? -Riddles

Last Answer : A dollar bill.

why did colonists feel that the british parliament overstepped its bounds with the stamp act?

Description : why did colonists feel that the british parliament overstepped its bounds with the stamp act?

Last Answer : The colonists felt that the British government had no right to tax them because there were not any representatives of the colonies in the British Parliament. The colonies had no say in how much the taxes should be or what they should pay for. They didn't think this was fair.

What does leaps and bounds mean ?

Description : What does leaps and bounds mean ?

Last Answer : By leaps and bounds - means very fast

Why Was I Always Taught That Once A Kick off Went 10 Yards It Was A Free Ball Unless It Went Out Of Bounds. I have Seen At Least 2 College Games Where The Ball Went Into The End Zone Untouched And Did?

Description : Why Was I Always Taught That Once A Kick off Went 10 Yards It Was A Free Ball Unless It Went Out Of Bounds. I have Seen At Least 2 College Games Where The Ball Went Into The End Zone Untouched And Did?

Last Answer : There are two separate kicks (not including punts) in football,the scrimmage kick and the on-sides kick.The scrimmage kick is also known as the kickoff. A Kickoffoccurs at the start of each ... goesout of bounds, the Receiving team retains possession at the spotwhere the ball goes out of bounds.

What is required to have a correct point of beginning on a metes and bounds legal description?

Description : What is required to have a correct point of beginning on a metes and bounds legal description?

Last Answer : Feel Free to Answer

What shape would a molecule with two bounds groups and two lone pairs have?

Description : What shape would a molecule with two bounds groups and two lone pairs have?

Last Answer : The correct answer is: Bent.

What shape would a molecule with two bounds groups and two lone pairs have?

Description : What shape would a molecule with two bounds groups and two lone pairs have?

Last Answer : The correct answer is: Bent.

The first marine sanctuary in India, having within its bounds coral reefs, mollusca, dolphins, tortoises and various kinds of sea birds, has been established in (a) Sundarbans (b) Chilka Lake (c) Gulf of Kachchh (d) Lakshadweep

Description : The first marine sanctuary in India, having within its bounds coral reefs, mollusca, dolphins, tortoises and various kinds of sea birds, has been established in (a) Sundarbans (b) Chilka Lake (c) Gulf of Kachchh (d) Lakshadweep

Last Answer : Ans: (b)

In the echo method of estimating distnces, a radar signa was sent towards the Mars. If the echo was received after 8 minute 20 second, how far wat the

Description : In the echo method of estimating distnces, a radar signa was sent towards the Mars. If the echo was received after 8 minute 20 second, how far wat the

Last Answer : In the echo method of estimating distnces, a radar signa was sent towards the Mars. If the echo was ... wat the Mars from the earth at that instant?

Which one of the following is not included while estimating national income through income method? (1) Rent (2) Mixed incomes (3) Pension (4) Undistributed profits

Description : Which one of the following is not included while estimating national income through income method? (1) Rent (2) Mixed incomes (3) Pension (4) Undistributed profits

Last Answer : (3) Pension Explanation: The income approach equates the total output of a nation to the total factor income received by residents or citizens of the nation. Transfer incomes are excluded from ... wages of labourers will be included, pensions of retired workers will be excluded from national income.

Which one of the following is not a method of estimating National Income? (1) Expenditure method (2) Product method (3) Matrix method (4) Income method

Description : Which one of the following is not a method of estimating National Income? (1) Expenditure method (2) Product method (3) Matrix method (4) Income method

Last Answer : (3) Matrix method Explanation: The matrix method is a structural analysis method used as a fundamental principle in many applications in civil engineering. The method is carried out, using ... of measuring national income. The methods are product method, income method and expenditure method.

Pick up the correct statement from the following: A. The maximum rate of storm runoff is called peak drainage discharge B. Rational method of estimating peak run off, may be used precisely for areas less than 50 hectares C. The period after which the entire area starts contributing to the runoff, is called the time of concentration D. All the above

Description : Pick up the correct statement from the following: A. The maximum rate of storm runoff is called peak drainage discharge B. Rational method of estimating peak run off, may be used precisely for ... entire area starts contributing to the runoff, is called the time of concentration D. All the above

Last Answer : ANS: D

Why is the MMF method of estimating the voltage regulation considered as the optimistic method?

Description : Why is the MMF method of estimating the voltage regulation considered as the optimistic method?

Last Answer : In this method the actual value is more than the result obtained.

Why is the synchronous impedance method of estimating voltage regulation considered as pessimistic method?

Description : Why is the synchronous impedance method of estimating voltage regulation considered as pessimistic method?

Last Answer : Compared to other methods, the value of voltage regulation obtained by the synchronous impedance method is always higher than the actual valuei.e actual value is lower than the results obtained and therefore this method is called the pessimistic method.

What are the advantages and disadvantages of estimating the voltage regulation of an Alternator by EMF method?

Description : What are the advantages and disadvantages of estimating the voltage regulation of an Alternator by EMF method?

Last Answer : Advantages: · Simple no load tests (for obtaining OCC and SCC) are to be conducted · Calculation procedure is much simpler Disadvantages: · The value of voltage regulation obtained by this method is always higher than the actual value

Kathryn has little experience estimating the time it will take to complete a systems project. She has just completed the planning phase of the project. What method should she use to estimate the time required to build the system? a. adjusted project complexity b. function points c. industry standards d. Microsoft Project e. more complex approach

Description : Kathryn has little experience estimating the time it will take to complete a systems  project. She has just completed the planning phase of the project. What method should she use to estimate the ... b. function points  c. industry standards  d. Microsoft Project  e. more complex approach

Last Answer : c. industry standards

Measuring Biochemical Oxygen Demand (BOD) is a method used for (a) estimating the amount of organic matter in sewage water (b) working out the efficiency of oil driven automobile engines (c) measuring the activity of Saccharomyces cerevisiae in producing curd on a commercial scale (d) working out the efficiency of RBCs about their capacity to carry oxygen.

Description : Measuring Biochemical Oxygen Demand (BOD) is  a method used for  (a) estimating the amount of organic matter in  sewage water (b) working out the efficiency of oil driven  automobile engines ... commercial  scale (d) working out the efficiency of RBCs about their  capacity to carry oxygen.

Last Answer : (a) estimating the amount of organic matter in  sewage water

Measuring Biochemical Oxygen Demand (BOD) is a method used for (a) estimating the amount of organic matter in sewage water (b) working out the efficiency of oil driven automobile engines (c) measuring the activity of Saccharomyces cerevisiae in producing curd on a commercial scale (d) working out the efficiency of RBCs about their capacity to carry oxygen.

Description : Measuring Biochemical Oxygen Demand (BOD) is a method used for (a) estimating the amount of organic matter in sewage water (b) working out the efficiency of oil driven automobile engines (c) ... a commercial scale (d) working out the efficiency of RBCs about their capacity to carry oxygen.

Last Answer : (a) estimating the amount of organic matter in sewage water

How do you estimate in the three point estimating method?

Description : How do you estimate in the three point estimating method?

Last Answer : One optimistic estimate, a pessimistic estimate and one “most likey” estimate is considered for an activity. (Op estimate+6 X most likely+ pess. Estimate) is calculated and divided by 6. This result then may be further iterated. This is the estimate to be used.

The credit default spread method of valuation of a guarantee given by a parent company on behalf of its subsidiary involves estimating the value ____________. a) using credit default spread based on the credit rating of the subsidiary b) using credit default spread based on the credit rating of the guarantor c) based on probability of default d) of the guarantee using an option pricing model

Description : The credit default spread method of valuation of a guarantee given by a parent company on behalf of its subsidiary involves estimating the value ____________. a) using credit default spread based on ... guarantor c) based on probability of default d) of the guarantee using an option pricing model

Last Answer : a) using credit default spread based on the credit rating of the subsidiary

Method of managing promotion budget by defining objectives, determining tasks to achieve objectives and estimating costs for activities is called A. percentage of sales method B. affordable method C. competitive parity method D. objective and task method

Description : Method of managing promotion budget by defining objectives, determining tasks to achieve objectives and estimating costs for activities is called A. percentage of sales method B. affordable method C. competitive parity method D. objective and task method

Last Answer : D. objective and task method

72. Measuring Biochemical Oxygen Demand (BOD) is a method used for (1) Working out the efficiency of R.B.Cs. about their capacity to carry oxygen (2) Estimating the amount of organic matter is sewage water (3) Working out the efficiency of oil driven automobile engines (4) Measuring the activity of Sacccharomyces cerevisae in producing curd on a commercial scale

Description : 72. Measuring Biochemical Oxygen Demand (BOD) is a method used for (1) Working out the efficiency of R.B.Cs. about their capacity to carry oxygen (2) Estimating the amount of ... driven automobile engines (4) Measuring the activity of Sacccharomyces cerevisae in producing curd on a commercial scale

Last Answer : Estimating the amount of organic matter is sewage water

Which one of the following is not included while estimating national income through income method? (1) Rent (2) Mixed incomes (3) Pension (4) Undistributed profits

Description : Which one of the following is not included while estimating national income through income method? (1) Rent (2) Mixed incomes (3) Pension (4) Undistributed profits 

Last Answer : Pension

Which one of the following is not a method of estimating National Income ? (1) Expenditure method (2) Product method (3) Matrix method (4) Income method

Description : Which one of the following is not a method of estimating National Income ? (1) Expenditure method (2) Product method (3) Matrix method (4) Income method

Last Answer : Matrix method 

The number of plastic hinges required in a structure of indeterminate status for a ‘mechanism’ to develop is (a) i (b) i + 1 ( c) i + 2 (d) i – 1 Where ‘i' is the degree of indeterminacy

Description : The number of plastic hinges required in a structure of indeterminate status for a ‘mechanism’ to develop is (a) i (b) i + 1 ( c) i + 2 (d) i – 1 Where ‘i' is the degree of indeterminacy

Last Answer : (b) i + 1

The bound charge density and free charge density are 12 and 6 units respectively. Calculate the susceptibility. a) 1 b) 0 c) 2 d) 72

Description : The bound charge density and free charge density are 12 and 6 units respectively. Calculate the susceptibility. a) 1 b) 0 c) 2 d) 72

Last Answer : c) 2

In a bar of large length when held vertically and subjected to a load at its lower end, its own￾weight produces additional stress. The maximum stress will be (A) At the lower cross-section (B) At the built-in upper cross-section (C) At the central cross-section (D) At every point of the bar

Description : In a bar of large length when held vertically and subjected to a load at its lower end, its own￾weight produces additional stress. The maximum stress will be (A) At the lower cross-section (B) At the built-in upper cross-section (C) At the central cross-section (D) At every point of the bar

Last Answer : (B) At the built-in upper cross-section

In highway construction on super-elevated curves, the rolling shall proceed from (A) Sides towards the centre (B) Centre towards the sides (C) Lower edge towards the upper edge (D) Upper edge towards the lower edge

Description : In highway construction on super-elevated curves, the rolling shall proceed from (A) Sides towards the centre (B) Centre towards the sides (C) Lower edge towards the upper edge (D) Upper edge towards the lower edge

Last Answer : Answer: Option C

Normally pre-stressing wires are arranged in the (A) Upper part of the beam (B) Lower part of the beam (C) Center (D) Anywhe

Description : Normally pre-stressing wires are arranged in the (A) Upper part of the beam (B) Lower part of the beam (C) Center (D) Anywhere

Last Answer : Answer: Option B

Ware house pack' of cement means (A) Full capacity of the ware house (B) Pressure exertion of the bags of upper layers (C) Pressure compaction of the bags on lower layers (D) Packing the ware house

Description : Ware house pack' of cement means (A) Full capacity of the ware house (B) Pressure exertion of the bags of upper layers (C) Pressure compaction of the bags on lower layers (D) Packing the ware house

Last Answer : Answer: Option C

Nogging of a common wooden partition is (A) Upper horizontal wooden member (B) Lower horizontal wooden member (C) Intermediate horizontal wooden member (D) Vertical wooden member

Description : Nogging of a common wooden partition is (A) Upper horizontal wooden member (B) Lower horizontal wooden member (C) Intermediate horizontal wooden member (D) Vertical wooden member

Last Answer : Answer: Option C

Stud(s) of a common wooden partition (A) Are vertical wooden members (B) Is the upper horizontal wooden member (C) Is the lower horizontal wooden member (D) Are the intermediate horizontal wooden members

Description : Stud(s) of a common wooden partition (A) Are vertical wooden members (B) Is the upper horizontal wooden member (C) Is the lower horizontal wooden member (D) Are the intermediate horizontal wooden members

Last Answer : Answer: Option A

In grillage foundations a minimum 15 cm cover is provided on (A) Upper flange of top tier (B) Lower beam of lower tier (C) Ends of external beams (D) None to these

Description : In grillage foundations a minimum 15 cm cover is provided on (A) Upper flange of top tier (B) Lower beam of lower tier (C) Ends of external beams (D) None to these

Last Answer : Answer: Option B

The sill of a common wooden partition is (A) Vertical wooden member on either end (B) Lower horizontal wooden member (C) Upper horizontal wooden member (D) Intermediate horizontal wooden member

Description : The sill of a common wooden partition is (A) Vertical wooden member on either end (B) Lower horizontal wooden member (C) Upper horizontal wooden member (D) Intermediate horizontal wooden member

Last Answer : Answer: Option B

For estimating the run off of catchments, the mean value of the constant 'K' in the Khosla's formula Qy = Py - K (1.8 Ty + 32) is (A) 1.21 (B) 1.23 (C) 1.25 (D) 1.27

Description : For estimating the run off of catchments, the mean value of the constant 'K' in the Khosla's formula Qy = Py - K (1.8 Ty + 32) is (A) 1.21 (B) 1.23 (C) 1.25 (D) 1.27

Last Answer : (D) 1.27

While estimating the qualities for the construction of a building, the correct metric unit is (A) Metre for length (B) Cubic metre for area (C) Square metres for volume (D) Litre for capacity

Description : While estimating the qualities for the construction of a building, the correct metric unit is (A) Metre for length (B) Cubic metre for area (C) Square metres for volume (D) Litre for capacity

Last Answer : (D) Litre for capacity