The weight of a pycnometer containing 400 g sand and water full to the top is 2150 g. The weight of pycnometer full of clean water is 1950 g. If specific gravity of the soil is 2.5, the water content is (A) 5 % (B) 10 % (C) 15 % (D) 20 %

The weight of a pycnometer containing 400 g sand and water full to the top is 2150 g. The weight
of pycnometer full of clean water is 1950 g. If specific gravity of the soil is 2.5, the water content is
(A) 5 %
(B) 10 %
(C) 15 %
(D) 20 %
by

1 Answer

Answer :

(D) 20 %
by

Related questions

260 g of wet soil was taken in a pycnometer jar of weight 400 g in order to find the moisture content in the soil, with specific gravity of soil particles 2.75. The weight of soil and remaining water filled in pycnometer without air bubbles was 1415 g and the weight of pycnometer filled with water alone was 1275 g. The moisture content in the soil is (A) 24.2 % (B) 18.2 % (C) 53.8 % (D) None of these

Description : 260 g of wet soil was taken in a pycnometer jar of weight 400 g in order to find the moisture content in the soil, with specific gravity of soil particles 2.75. The weight of soil and remaining water filled in pycnometer without air ... is (A) 24.2 % (B) 18.2 % (C) 53.8 % (D) None of these

Last Answer : Answer: Option B

For determine the specific gravity of soil solids, using a pycnometer of 500 cc., the following data is available : Weight of dry empty pycnometer = 125 g Weight of dried soil and pycnometer = 500 g Weight of dried soil and distilled = 850 g water filled in pycnometer up to top The specific gravity of soil solids, is (A) 2.0 (B) 2.25 (C) 2.50 (D) 2.75

Description : For determine the specific gravity of soil solids, using a pycnometer of 500 cc., the following data is available : Weight of dry empty pycnometer = 125 g Weight of dried soil and pycnometer = 500 g Weight of dried soil and distilled ... of soil solids, is (A) 2.0 (B) 2.25 (C) 2.50 (D) 2.75

Last Answer : (C) 2.50

The total weight of a pycnometer with water and oven dried soil 20 (g) is 1600 g. The pycnometer filled with water alone weighs 1500 g. The specific gravity of the soil, is (A) 1.0 (B) 1.5 (C) 2.0 (D) 2.5

Description : The total weight of a pycnometer with water and oven dried soil 20 (g) is 1600 g. The pycnometer filled with water alone weighs 1500 g. The specific gravity of the soil, is (A) 1.0 (B) 1.5 (C) 2.0 (D) 2.5

Last Answer : (C) 2.0

A partially saturated sample of soil has a unit weight of 2.0 g/cm3 and specific gravity of soil particles is 2.6. If the moisture content in the soil is 20%, the degree of saturation is (A) 20 % (B) 77 % (C) 92 % (D) None of these

Description : A partially saturated sample of soil has a unit weight of 2.0 g/cm3 and specific gravity of soil particles is 2.6. If the moisture content in the soil is 20%, the degree of saturation is (A) 20 % (B) 77 % (C) 92 % (D) None of these

Last Answer : Answer: Option C

A compacted soil sample using 10% moisture content has a weight of 200 g and mass unit weight of 2.0 g/cm3 . If the specific gravity of soil particles and water are 2.7 and 1.0, the degree of saturation of the soil is (A) 11.1 % (B) 55.6 % (C) 69.6 % (D) None of these

Description : A compacted soil sample using 10% moisture content has a weight of 200 g and mass unit weight of 2.0 g/cm3 . If the specific gravity of soil particles and water are 2.7 and 1.0, the degree of saturation of the soil is (A) 11.1 % (B) 55.6 % (C) 69.6 % (D) None of these

Last Answer : (B) 55.6 %

Which of the following methods is most accurate for the determination of the water content of soil? (A) Oven drying method (B) Sand bath method (C) Calcium carbide method (D) Pycnometer method

Description : Which of the following methods is most accurate for the determination of the water content of soil? (A) Oven drying method (B) Sand bath method (C) Calcium carbide method (D) Pycnometer method

Last Answer : Option A

A pycnometer is used to determine (A) Water content and voids ratio (B) Specific gravity and dry density (C) Water content and specific gravity (D) Voids ratio and dry density

Description : A pycnometer is used to determine (A) Water content and voids ratio (B) Specific gravity and dry density (C) Water content and specific gravity (D) Voids ratio and dry density

Last Answer : (C) Water content and specific gravity

You are given a sample of soil containing coarse grains to determine its water content, you will use (A) Pycnometer (B) Oven-drying method (C) Calcium carbide method (D) Alcohol method

Description : You are given a sample of soil containing coarse grains to determine its water content, you will use (A) Pycnometer (B) Oven-drying method (C) Calcium carbide method (D) Alcohol method

Last Answer : Answer: Option A

For determining the moisture content of a soil sample, the following data is available Weight of container = 260 g, Weight of soil sample and = 320 g container, Weight of soil sample (dried) and = 310 g container. The moisture content of the soil sample, is (A) 15 % (B) 18 % (C) 20 % (D) 25 %

Description : For determining the moisture content of a soil sample, the following data is available Weight of container = 260 g, Weight of soil sample and = 320 g container, Weight of soil sample (dried) and = 310 g container. The moisture content of the soil sample, is (A) 15 % (B) 18 % (C) 20 % (D) 25 %

Last Answer : (C) 20 %

Degree of saturation of a natural soil deposit having water content 15%, specific gravity 2.50 and void ratio 0.5, is (A) 50 % (B) 60 % (C) 75 % (D) 80 %

Description : Degree of saturation of a natural soil deposit having water content 15%, specific gravity 2.50 and void ratio 0.5, is (A) 50 % (B) 60 % (C) 75 % (D) 80 %

Last Answer : (C) 75 %

If voids ratio is 0.67, water content is 0.188 and specific gravity is 2.68, the degree of saturation of the soil, is (A) 25 % (B) 40 % (C) 60 % (D) 75 %

Description : If voids ratio is 0.67, water content is 0.188 and specific gravity is 2.68, the degree of saturation of the soil, is (A) 25 % (B) 40 % (C) 60 % (D) 75 %

Last Answer : Answer: Option D

A soil sample of mass specific gravity 1.92 has moisture content 30%. If the specific gravity of solids is 2.75, the degree of saturation, is (A) 95.4 % (B) 95.5 % (C) 95.6 % (D) 95.7 %

Description : A soil sample of mass specific gravity 1.92 has moisture content 30%. If the specific gravity of solids is 2.75, the degree of saturation, is (A) 95.4 % (B) 95.5 % (C) 95.6 % (D) 95.7 %

Last Answer : Option D

Write step by step procedure to determine specific gravity of soil by pycnometer in laboratory.

Description : Write step by step procedure to determine specific gravity of soil by pycnometer in laboratory.

Last Answer : 1. Clean the pycnometer and dry it, find the mass of pycnometer, brass cap and washer accurate to 1g. say M1 2. Put about 200gm to 400gm of wet soil sample in pycnometer and find its mass with its cap ... it top of cap and find its weight say M4. 5. The specific gravity is calculated by 

Define specific gravity of soil. Explain the stepwise procedure of determination of specific gravity of soil by pycnometer.

Description : Define specific gravity of soil. Explain the stepwise procedure of determination of specific gravity of soil by pycnometer. 

Last Answer : Specific Gravity: It is ratio of unit weight in air of a given volume of soil solids at a specific temperature to unit weight in air of an equal volume of distilled water at same temperature. ... Repeat all above steps two more times to calculate average specific gravity of given soil sample.

A soil mass coated with a thin layer of paraffin weighs 460 g. When immersed, it displaces 299 cc of water. The weight of paraffin is 10 g. If specific gravity of solids is 2.5 and that of paraffin 0.9, the void ratio of soil, is (A) 0.55 (B) 0.60 (C) 0.65 (D) 0.70

Description : A soil mass coated with a thin layer of paraffin weighs 460 g. When immersed, it displaces 299 cc of water. The weight of paraffin is 10 g. If specific gravity of solids is 2.5 and that of paraffin 0.9, the void ratio of soil, is (A) 0.55 (B) 0.60 (C) 0.65 (D) 0.70

Last Answer : Answer: Option B

A sample of saturated soil has 30% water content and the specific gravity of soil grains is 2.6. The dry density of the soil mass in g/cm3 , is (A) 1.47 (B) 1.82 (C) 1.91 (D) None of these

Description : A sample of saturated soil has 30% water content and the specific gravity of soil grains is 2.6. The dry density of the soil mass in g/cm3 , is (A) 1.47 (B) 1.82 (C) 1.91 (D) None of these

Last Answer : (D) None of these

Hydrometer measures the specific gravity of liquids based on the principles of buoyancy. Pycnometer is used to measure the specific gravity of (A) Powder & granular solids (B) Liquids (C) Low melting point semi-solids (D) All 'a', 'b' & 'c

Description : Hydrometer measures the specific gravity of liquids based on the principles of buoyancy. Pycnometer is used to measure the specific gravity of (A) Powder & granular solids (B) Liquids (C) Low melting point semi-solids (D) All 'a', 'b' & 'c

Last Answer : (D) All 'a', 'b' & 'c

A pycnometer is used for the measurement of (A) Flow rate of molten metal (B) Specific gravity of a liquid (C) Composition of alloys (D) Concentration of a solution

Description : A pycnometer is used for the measurement of (A) Flow rate of molten metal (B) Specific gravity of a liquid (C) Composition of alloys (D) Concentration of a solution

Last Answer : Option B

Write step by step procedure for determination of specific gravity by pycnometer bottle.

Description : Write step by step procedure for determination of specific gravity by pycnometer bottle. 

Last Answer : Procedure for determination of specific gravity by pycnometer bottle: 1. Clean the pycnometer bottle and dry it. Take the weight of empty pycnometer with conical cap as W1' gm. 2. Oven dry the ... 8. Repeat all above steps two more times to calculate average specific gravity of given soil sample.

PROBLEM EA Sample of moist soil has a water content of 20.0% and the moist unit weight of 21.09 KN/cu.meter. The specific gravity of the soil is 2.75. Compute the degree of saturation and the value of porosity?

Description : PROBLEM EA Sample of moist soil has a water content of 20.0% and the moist unit weight of 21.09 KN/cu.meter. The specific gravity of the soil is 2.75. Compute the degree of saturation and the value of porosity?

Last Answer : two seconds

The ratio of the weight of given volume of soil solids to the weight of an equal volume of distilled water at the given temperature, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content

Description : The ratio of the weight of given volume of soil solids to the weight of an equal volume of distilled water at the given temperature, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content

Last Answer : (B) Specific gravity

The ratio of the weight of water to the weight of solids in a given mass of soil, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content

Description : The ratio of the weight of water to the weight of solids in a given mass of soil, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content

Last Answer : Answer: Option D

If is specific gravity of sand particles, is porosity, the critically hydraulic gradient (A) ic = (G + 1)/(1 - e) (B) ic = (G + 1)/(1 + e) (C) ic = (G - 1)/(1 + e) (D) ic = (G - 1)/(1 - e)

Description : If is specific gravity of sand particles, is porosity, the critically hydraulic gradient (A) ic = (G + 1)/(1 - e) (B) ic = (G + 1)/(1 + e) (C) ic = (G - 1)/(1 + e) (D) ic = (G - 1)/(1 - e)

Last Answer : Answer: Option C

The yield of a rapid gravity filter as compared to that of slow sand filter, is (A) 10 times (B) 15 times (C) 20 times (D) 30 times

Description : The yield of a rapid gravity filter as compared to that of slow sand filter, is (A) 10 times (B) 15 times (C) 20 times (D) 30 times

Last Answer : (D) 30 times

Pick up the correct statement from the following: (A) The phenomenon of quicksand generally occurs in the cohesionless soil (B) At critical hydraulic gradient, the saturated sand becomes quick (C) The critical gradient depends on the void ratio and the specific gravity (D) All the above

Description : Pick up the correct statement from the following: (A) The phenomenon of quicksand generally occurs in the cohesionless soil (B) At critical hydraulic gradient, the saturated sand becomes quick (C) The critical gradient depends on the void ratio and the specific gravity (D) All the above

Last Answer : (D) All the above

A coarse-grained soil has a voids ratio 0.75, and specific gravity as 2.75. The critical gradient at which quick sand condition occurs, is (A) 0.25 (B) 0.50 (C) 0.75 (D) 1.00

Description : A coarse-grained soil has a voids ratio 0.75, and specific gravity as 2.75. The critical gradient at which quick sand condition occurs, is (A) 0.25 (B) 0.50 (C) 0.75 (D) 1.00

Last Answer : (D) 1.00

A soil has a bulk density of 22 kN/m3 and water content 10 %. The dry density of soil is (A) 18.6 kN/m3 (B) 20.0 kN/m3 (C) 22.0 kN/m3 (D) 23.2 kN/m3 Answer: Option

Description : A soil has a bulk density of 22 kN/m3 and water content 10 %. The dry density of soil is (A) 18.6 kN/m3 (B) 20.0 kN/m3 (C) 22.0 kN/m3 (D) 23.2 kN/m3

Last Answer : (B) 20.0 kN/m3

If water content of a soil is 40%, G is 2.70 and void ratio is 1.35, the degree of saturation is (A) 70 % (B) 75 % (C) 80 % (D) 85 %

Description : If water content of a soil is 40%, G is 2.70 and void ratio is 1.35, the degree of saturation is (A) 70 % (B) 75 % (C) 80 % (D) 85 %

Last Answer : Answer: Option C

Bulking of sand is maximum if moisture content is about (A) 2 % (B) 4 % (C) 6 % (D) 10 %

Description : Bulking of sand is maximum if moisture content is about (A) 2 % (B) 4 % (C) 6 % (D) 10 %

Last Answer : Answer: Option B

The moisture content in a well seasoned timber is (A) 4 % to 6 % (B) 10 % to 12 % (C) 15 % to 20 % (D) 100 %

Description : The moisture content in a well seasoned timber is (A) 4 % to 6 % (B) 10 % to 12 % (C) 15 % to 20 % (D) 100 %

Last Answer : Answer: Option B

A pycnometer is used to determine (A) Voids ratio (B) Dry density (C) Water content (D) Density index

Description : A pycnometer is used to determine (A) Voids ratio (B) Dry density (C) Water content (D) Density index

Last Answer : (C) Water content

A fundamental equation of void ratio (e), specific gravity (G), water content and degree of saturation (Sr ) is (A) e = /Sr(B) = eG/Sr(C) G = /S(D) Sr = /G

Description : A fundamental equation of void ratio (e), specific gravity (G), water content and degree of saturation (Sr ) is (A) e = /Sr (B) = eG/Sr (C) G = /S (D) Sr = /G

Last Answer : (A) e = /Sr

Fundamental relationship between dry density ( d), specific gravity (G), water content ( ) and percentage of air voids (na) is: (A) d = (1 - na) G (1 + ) (B) d = (1 + na) G (1 + ) (C) d = (1 + na) G (1 - ) (D) d = (1 - na) G (1 - )

Description : Fundamental relationship between dry density ( d), specific gravity (G), water content ( ) and percentage of air voids (na) is: (A) d = (1 - na) G (1 + ) (B) d = (1 + na) G (1 + ) (C) d = (1 + na) G (1 - ) (D) d = (1 - na) G (1 - )

Last Answer : Answer: Option A

If the depth of moist sand in a cylinder is 15 cm and the depth of the sand when fully inundated with water is 12 cm, the bulking of the moist sand, is (A) 10 % (B) 12 % (C) 15 % (D) 25%

Description : If the depth of moist sand in a cylinder is 15 cm and the depth of the sand when fully inundated with water is 12 cm, the bulking of the moist sand, is (A) 10 % (B) 12 % (C) 15 % (D) 25%

Last Answer : Answer: Option D

The ratio of the volume of voids to the volume of soil solids in a given soil mass, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content

Description : The ratio of the volume of voids to the volume of soil solids in a given soil mass, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content

Last Answer : (C) Void ratio

A saturated soil sample has water content of 40% and specific gravity of soil particles 2.7. The void ratio of the soil, is (A) 0.4 (B) 0.52 (C) 1.08 (D) None of these

Description : A saturated soil sample has water content of 40% and specific gravity of soil particles 2.7. The void ratio of the soil, is (A) 0.4 (B) 0.52 (C) 1.08 (D) None of these

Last Answer : (C) 1.08

The ratio of the volume of voids to the total volume of the given soil mass, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content

Description : The ratio of the volume of voids to the total volume of the given soil mass, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content

Last Answer : (A) Porosity

the water content of a fully saturated soil mass is 100%, then the voids ratio of the sample is (A) Less than specific gravity of soil (B) Equal to specific gravity of soil (C) Greater than specific gravity of soil (D) Independent of specific gravity of soil

Description : the water content of a fully saturated soil mass is 100%, then the voids ratio of the sample is (A) Less than specific gravity of soil (B) Equal to specific gravity of soil (C) Greater than specific gravity of soil (D) Independent of specific gravity of soil

Last Answer : Answer: Option B

The natural water content of the soil sample was found to be 40%, specific gravity is 2.7 and void ratio 1.2; then the degree of saturation of the soil will be (a) 100% (b) 69% (c) 87% (d) 90%

Description : The natural water content of the soil sample was found to be 40%, specific gravity is 2.7 and void ratio 1.2; then the degree of saturation of the soil will be (a) 100% (b) 69% (c) 87% (d) 90%

Last Answer : (d) 90%

If dry density, water density and specific gravity of solids of a given soil sample are 1.6 g/cc, 1.84 g/cc and 2.56 respectively, the porosity of the soil sample, is (A) 0.375 (B) 0.370 (C) 0.380 (D) 0.390

Description : If dry density, water density and specific gravity of solids of a given soil sample are 1.6 g/cc, 1.84 g/cc and 2.56 respectively, the porosity of the soil sample, is (A) 0.375 (B) 0.370 (C) 0.380 (D) 0.390

Last Answer : (A) 0.375

A 1st class brick immersed in water for 24 hours, should not absorb water (by weight) more than (A) 10 % (B) 15 % (C) 20 % (D) 25 %

Description : A 1st class brick immersed in water for 24 hours, should not absorb water (by weight) more than (A) 10 % (B) 15 % (C) 20 % (D) 25 %

Last Answer : Answer: Option C

The weight of a good quality brick when immersed in water for a period of 16 hours should not exceed the weight of dry brick (A) 20 % (B) 15 % (C) 10 % (D) None of these

Description : The weight of a good quality brick when immersed in water for a period of 16 hours should not exceed the weight of dry brick (A) 20 % (B) 15 % (C) 10 % (D) None of these

Last Answer : Answer: Option A

A soil sample of mass specific gravity 1.92 has moisture content 30%. If the specific gravity of solids is 2.75, the void ratio, is (A) 0.858 (B) 0.860 (C) 0.862 (D) 0.864

Description : A soil sample of mass specific gravity 1.92 has moisture content 30%. If the specific gravity of solids is 2.75, the void ratio, is (A) 0.858 (B) 0.860 (C) 0.862 (D) 0.864

Last Answer : Option C

A moist soil sample of volume 60 cc. weighs 108 g and its dried weight is 86.4 g. If its absolute density is 2.52, the degree of saturation is (A) 54 % (B) 64 % (C) 74 % (D) 84 %

Description : A moist soil sample of volume 60 cc. weighs 108 g and its dried weight is 86.4 g. If its absolute density is 2.52, the degree of saturation is (A) 54 % (B) 64 % (C) 74 % (D) 84 %

Last Answer : (D) 84 %

If the specific gravity and voids in soil sample are G and e respectively, the hydraulic gradient i, is (A) (G - 1)/(1 + e) (B) (G + 1)/(1 - e) (C) (1 - G)/(1 + e) (D) (1 + G)/(1 + e)

Description : If the specific gravity and voids in soil sample are G and e respectively, the hydraulic gradient i, is (A) (G - 1)/(1 + e) (B) (G + 1)/(1 - e) (C) (1 - G)/(1 + e) (D) (1 + G)/(1 + e)

Last Answer : Answer: Option A

The general relationship between specific gravity (G), weight of water ( ), degree of saturation (Sr ), void ratio (e) and bulk density ( ), is (A) = (S - eSr ) /(1 + e) (B) = (G + eSr ) /(1 + e) (C) = (1 + e) /(G + Sr ) (D) = (1 - Sr ) e/(G + Sr )

Description : The general relationship between specific gravity (G), weight of water ( ), degree of saturation (Sr ), void ratio (e) and bulk density ( ), is (A) = (S - eSr ) /(1 + e) (B) = (G + eSr ) /(1 + e) (C) = (1 + e) /(G + Sr ) (D) = (1 - Sr ) e/(G + Sr )

Last Answer : (B) = (G + eSr ) /(1 + e)

Rapid gravity filters (A) Were developed by G.W. Fuller (B) Make use of coarser sand with effective size as 0.5 mm (C) Yield as high as 30 times the yield of slow sand filters (D) All the above

Description : Rapid gravity filters  (A) Were developed by G.W. Fuller  (B) Make use of coarser sand with effective size as 0.5 mm  (C) Yield as high as 30 times the yield of slow sand filters  (D) All the above 

Last Answer : (D) All the above 

The catalytic converter for conversion of SO2 to SO3 by contact process should have a feed with SO2 content between (A) 2-5 % (B) 7-10 % (C) 12-15 % (D) 20-25 %

Description : The catalytic converter for conversion of SO2 to SO3 by contact process should have a feed with SO2 content between (A) 2-5 % (B) 7-10 % (C) 12-15 % (D) 20-25 %

Last Answer : (B) 7-10 %

The hydraulic head that would produce a quick condition in a sand stratum of thickness 1.5 m, specific gravity 2.67 and voids ratio 0.67 is equal to(A) 1.0 m (B) 1.5 m (C) 2.0 m (D) 3 m

Description : The hydraulic head that would produce a quick condition in a sand stratum of thickness 1.5 m, specific gravity 2.67 and voids ratio 0.67 is equal to (A) 1.0 m (B) 1.5 m (C) 2.0 m (D) 3 m

Last Answer : (B) 1.5 m

In a liquid limit test, the moisture content at 10 blows was 70% and that at 100 blows was 20%. The liquid limit of the soil, is (A) 35 % (B) 50 % (C) 65 % (D) None of these

Description : In a liquid limit test, the moisture content at 10 blows was 70% and that at 100 blows was 20%. The liquid limit of the soil, is (A) 35 % (B) 50 % (C) 65 % (D) None of these

Last Answer : Answer: Option C