The catalytic converter for conversion of SO2 to SO3 by contact process should have a feed with SO2 content between (A) 2-5 % (B) 7-10 % (C) 12-15 % (D) 20-25 %

The catalytic converter for conversion of SO2
to SO3 by contact process
should have a feed with SO2 content between
(A) 2-5 %
(B) 7-10 %
(C) 12-15 %
(D) 20-25 %
by

1 Answer

Answer :

(B) 7-10 %
by

Related questions

Multistage catalytic converter is not used in the (A) Conversion of SO2 to SO3 (B) NH3 synthesis reaction (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Multistage catalytic converter is not used in the (A) Conversion of SO2 to SO3 (B) NH3 synthesis reaction (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (B) NH3 synthesis reaction

Conversion of SO2 to SO3 in Monsanto 4-pass converter is about __________ percent. (A) 80 (B) 90 (C) 98 (D) 100

Description : Conversion of SO2 to SO3 in Monsanto 4-pass converter is about __________ percent. (A) 80 (B) 90 (C) 98 (D) 100

Last Answer : (C) 98

In multistage equilibrium conversion of SO2 to SO3 (2SO2 + O2 ⇌ 2SO3 ), the reverse reaction becomes appreciable at a temperature of 550° C. The percentage equilibrium conversion of SO2 to SO3 can be increased by (A) Increasing the oxygen concentration (B) Putting more quantity of V2O5 catalyst in the converter (C) Removing some quantity of SO3 during intermediate stage (D) Maintaining low temperature & pressure in the converter

Description : In multistage equilibrium conversion of SO2 to SO3 (2SO2 + O2 ⇌ 2SO3 ), the reverse reaction becomes appreciable at a temperature of 550° C. The percentage equilibrium conversion of SO2 to ... some quantity of SO3 during intermediate stage (D) Maintaining low temperature & pressure in the converter

Last Answer : (C) Removing some quantity of SO3 during intermediate stage

Pick out the wrong statement. (A) Conversion of SO2 to SO3 in Monsanto-4 pass converter is about 98% (B) The chemical formula of oleum is H2S2O7 , which is formed by saturating sulphuric acid with sulphur trioxide (C) Vitriol oil is nothing but technical sulphuric acid (D) Decomposition of sulphuric acid on heating does not start before its boiling

Description : Pick out the wrong statement. (A) Conversion of SO2 to SO3 in Monsanto-4 pass converter is about 98% (B) The chemical formula of oleum is H2S2O7 , which is formed by saturating ... but technical sulphuric acid (D) Decomposition of sulphuric acid on heating does not start before its boiling

Last Answer : (D) Decomposition of sulphuric acid on heating does not start before its boiling

In chamber process of sulphuric acid manufacture in industry, the gas phase oxidation of SO2 to SO3 is accomplished by a __________ reaction. (A) Non-catalytic homogeneous (B) Non-catalytic heterogeneous (C) Catalytic homogenous (D) Catalytic heterogeneous

Description : In chamber process of sulphuric acid manufacture in industry, the gas phase oxidation of SO2 to SO3 is accomplished by a __________ reaction. (A) Non-catalytic homogeneous (B) Non-catalytic heterogeneous (C) Catalytic homogenous (D) Catalytic heterogeneous

Last Answer : (C) Catalytic homogenous

In the converter of the contact process for the manufacture of H2SO4 the equilibrium conversion of SO2__________ (i) __________ with increase in temperature and __________ (ii) __________ with increase in the mole ratio of SO2 to air. (A) (i) increases (ii) decreases (B) (i) decreases (ii) increases (C) (i) increases (ii) increases (D) (i) decreases (ii) decreases

Description : In the converter of the contact process for the manufacture of H2SO4 the equilibrium conversion of SO2__________ (i) __________ with increase in temperature and __________ (ii) __________ with increase in the mole ratio ... increases (C) (i) increases (ii) increases (D) (i) decreases (ii) decreases

Last Answer : (B) (i) decreases (ii) increases

Limestone powder is injected during pulverised coal burning in boilers to __________ the flue gases. (A) Reduce SO2 content in (B) Catalytically convert SO2 to SO3 in (C) Increase the dew point of (D) None of these

Description : Limestone powder is injected during pulverised coal burning in boilers to __________ the flue gases. (A) Reduce SO2 content in (B) Catalytically convert SO2 to SO3 in (C) Increase the dew point of (D) None of these

Last Answer : (A) Reduce SO2 content in

Automobile exhaust is passed through two compartments catalytic converter employing platinum as catalyst for (A) Conversion of CO into CO2 in the second compartment (B) Conversion of NOx into N2 and NH3 in the first compartment (C) Oxidation of unburnt hydrocarbon fuel in the second compartment (D) All (A), (B) and (C)

Description : Automobile exhaust is passed through two compartments catalytic converter employing platinum as catalyst for (A) Conversion of CO into CO2 in the second compartment (B) Conversion of NOx into N2 and NH3 in the first ... of unburnt hydrocarbon fuel in the second compartment (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The gas phase reaction 2A ⇌ B is carried out in an isothermal plug flow reactor. The feed consists of 80 mole % A and 20 mole % inerts. If the conversion of A at the reactor exit is 50%, then CA/CA0 at the outlet of the reactor is (A) 2/3 (B) 5/8 (C) 1/3 (D) 3/8

Description : The gas phase reaction 2A ⇌ B is carried out in an isothermal plug flow reactor. The feed consists of 80 mole % A and 20 mole % inerts. If the conversion of A at the reactor exit is 50%, then CA/CA0 at the outlet of the reactor is (A) 2/3 (B) 5/8 (C) 1/3 (D) 3/8

Last Answer : (B) 5/8

In the manufacture of H2SO4 , vanadium catalyst as compared to platinum catalyst (A) Gives higher conversion efficiency (B) Has a longer life and is not poisoned by arsenic (C) Handles lower SO2 content gas (7 -10% SO2 ), thus increasing the capital cost of the plant (D) All (A), (B) and (C)

Description : In the manufacture of H2SO4 , vanadium catalyst as compared to platinum catalyst (A) Gives higher conversion efficiency (B) Has a longer life and is not poisoned by arsenic (C) Handles lower SO2 content gas (7 -10% SO2 ), thus increasing the capital cost of the plant (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Main pollutants released from iron & steel industry is (A) CO, CO2 & SO2 (B) H2S, NO & SO3 (C) CO2 , H2S & NO2 (D) SO3 , NO2 & CO2

Description : Main pollutants released from iron & steel industry is (A) CO, CO2 & SO2 (B) H2S, NO & SO3 (C) CO2 , H2S & NO2 (D) SO3 , NO2 & CO2

Last Answer : (A) CO, CO2 & SO2

Main pollutants released from petroleum refineries is (A) CO, SO2 & H2S (B) CO2 , NO & SO3 (C) CO2 , H2S & NO2 (D) SO3 , NO2 & CO2

Description : Main pollutants released from petroleum refineries is (A) CO, SO2 & H2S (B) CO2 , NO & SO3 (C) CO2 , H2S & NO2 (D) SO3 , NO2 & CO2

Last Answer : (A) CO, SO2 & H2S

Which of the following pollutants is absent in the emissions from a fertiliser plant? (A) SO2 & SO3 (B) NO2 (C) NH3 (D) CO

Description : Which of the following pollutants is absent in the emissions from a fertiliser plant? (A) SO2 & SO3 (B) NO2 (C) NH3 (D) CO

Last Answer : (D) CO

During manufacture of H2SO4 , the oxidation of SO2 to SO3 by oxygen is an endothermic reaction. The yield of SO3 will be maximised, if the (A) Temperature is increased (B) Pressure is reduced (C) Temperature is increased and pressure is reduced (D) Temperature is reduced and pressure is increased

Description : During manufacture of H2SO4 , the oxidation of SO2 to SO3 by oxygen is an endothermic reaction. The yield of SO3 will be maximised, if the (A) Temperature is increased (B) Pressure is reduced (C) Temperature is increased and pressure is reduced (D) Temperature is reduced and pressure is increased

Last Answer : (D) Temperature is reduced and pressure is increased

If helium is introduced in a reactor containing O2 , SO2 and SO3 at equilibrium, so that total pressure increases while volume and temperature remains constant. In this case the dissociation of SO3 (as per Le Chatelier's principle). (A) Decreases (B) Increases (C) Remains unaltered (D) Changes unpredictably

Description : If helium is introduced in a reactor containing O2 , SO2 and SO3 at equilibrium, so that total pressure increases while volume and temperature remains constant. In this case the dissociation of SO3 ( ... 's principle). (A) Decreases (B) Increases (C) Remains unaltered (D) Changes unpredictably

Last Answer : (A) Decreases

10% oleum comprises of 10% free (A) SO2 (B) H2SO3 (C) SO3 (D) H2SO4

Description : 10% oleum comprises of 10% free (A) SO2 (B) H2SO3 (C) SO3 (D) H2SO4

Last Answer : (C) SO3

More than 100 percent of __________ is present in oleum. (A) SO3 (B) H2SO4 (C) H2SO3 (D) SO2

Description : More than 100 percent of __________ is present in oleum. (A) SO3 (B) H2SO4 (C) H2SO3 (D) SO2

Last Answer : (B) H2SO4

. Bromides contained in hot mother liquor is treated with __________ during manufacture of bromine from sea water. (A) SO3 (B) Cl2 (C) NH3 (D) SO2

Description : . Bromides contained in hot mother liquor is treated with __________ during manufacture of bromine from sea water. (A) SO3 (B) Cl2 (C) NH3 (D) SO2

Last Answer : (B) Cl2

Oleum produces fumes of (A) SO2 (B) H2SO4 (C) SO3 (D) SO2 + H2SO4

Description : Oleum produces fumes of (A) SO2 (B) H2SO4 (C) SO3 (D) SO2 + H2SO4

Last Answer : (C) SO3

At a given temperature, the equilibrium yield of SO3 obtained from the oxidation of SO2 is proportional to (where, P = pressure of the system). (A) P (B) √P (C) P(D) 1/P

Description : At a given temperature, the equilibrium yield of SO3 obtained from the oxidation of SO2 is proportional to (where, P = pressure of the system). (A) P (B) √P (C) P (D) 1/P

Last Answer : (B) √P

The moisture content in a well seasoned timber is (A) 4 % to 6 % (B) 10 % to 12 % (C) 15 % to 20 % (D) 100 %

Description : The moisture content in a well seasoned timber is (A) 4 % to 6 % (B) 10 % to 12 % (C) 15 % to 20 % (D) 100 %

Last Answer : Answer: Option B

Raw Kerosene has a smoke point of 15 mm. After it is subjected to dearomatization by liquid SO2 extraction (Edeleanu process), its smoke point may become __________ mm. (A) 5 (B) 10 (C) 25 (D) 100

Description : Raw Kerosene has a smoke point of 15 mm. After it is subjected to dearomatization by liquid SO2 extraction (Edeleanu process), its smoke point may become __________ mm. (A) 5 (B) 10 (C) 25 (D) 100

Last Answer : (C) 25

For determining the moisture content of a soil sample, the following data is available Weight of container = 260 g, Weight of soil sample and = 320 g container, Weight of soil sample (dried) and = 310 g container. The moisture content of the soil sample, is (A) 15 % (B) 18 % (C) 20 % (D) 25 %

Description : For determining the moisture content of a soil sample, the following data is available Weight of container = 260 g, Weight of soil sample and = 320 g container, Weight of soil sample (dried) and = 310 g container. The moisture content of the soil sample, is (A) 15 % (B) 18 % (C) 20 % (D) 25 %

Last Answer : (C) 20 %

How would the equilibrium change if NO2 were added to SO2(g)+NO2(g)=NO(g)+SO3(g)+heat?

Description : How would the equilibrium change if NO2 were added to SO2(g)+NO2(g)=NO(g)+SO3(g)+heat?

Last Answer : The amount of NO and SO3 would increased.

Consider the following changes: 1. Curdling of milk 2. Sublimation of camphor 3. Drying of paint 4. Oxidation of SO2 to SO3 The chemical changes are: (a) 1, 2 and 4 only (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only

Description : Consider the following changes: 1. Curdling of milk 2. Sublimation of camphor 3. Drying of paint 4. Oxidation of SO2 to SO3 The chemical changes are: (a) 1, 2 and 4 only (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only

Last Answer : Ans:(b)

Mark the compound which possesses ionic, covalent and coordinate bonds. (1) NH4C1 (2) SO3 (3) SO2 (4) H2O

Description : Mark the compound which possesses ionic, covalent and coordinate bonds. (1) NH4C1 (2) SO3 (3) SO2 (4) H2O

Last Answer : (1) NH4C1 Explanation: Ammonium chloride (NH4Cl) is generally considered as an ionic compound but this compound has three different types of bond.

Acid rain is due to increase in atmospheric concentration of (a) ozone and dust (b) CO2 and CO (c) SO3 and CO (d) SO2 and NO2

Description : Acid rain is due to increase in atmospheric  concentration of (a) ozone and dust (b) CO2 and CO (c) SO3 and CO (d) SO2 and NO2

Last Answer : (d) SO2 and NO2.

Acid rain is due to increase in atmospheric concentration of (a) ozone and dust (b) CO2 and CO (c) SO3 and CO (d) SO2 and NO2.

Description : Acid rain is due to increase in atmospheric concentration of (a) ozone and dust (b) CO2 and CO (c) SO3 and CO (d) SO2 and NO2.

Last Answer : (d) SO2 and NO2.

Acid rain is caused by increase in the atmospheric concentration of (a) CO2 and CO (b) O3 and dust (c) SO2 and NO2 (d) SO3 and CO.

Description : Acid rain is caused by increase in the atmospheric concentration of (a) CO2 and CO (b) O3 and dust (c) SO2 and NO2 (d) SO3 and CO.

Last Answer : (c) SO2 and NO2

. Which of the following reagents will react with furan to form 2-furansulfonic acid? (a) SO3 in pyridine at 100°C (b) Dilute H2SO4 at 200°C (c) SO2 at 100°C (d) Dilute H2SO4 at 100°C

Description : Which of the following reagents will react with furan to form 2-furansulfonic acid? (a) SO3 in pyridine at 100°C (b) Dilute H2SO4 at 200°C (c) SO2 at 100°C (d) Dilute H2SO4 at 100°C

Last Answer : SO3 in pyridine at 100°C

When conc. H2 SO4 is added to dry KNO3 , brown fumes are evolved. These fumes are due to (1) SO3 (2) SO2 (3) NO2 (4) N2O

Description : When conc. H2 SO4 is added to dry KNO3 , brown fumes are evolved. These fumes are due to (1) SO3 (2) SO2 (3) NO2 (4) N2O

Last Answer : NO2

In SO3 absorber (Contact Process), packing material used is of (A) Cast iron (B) Chemical stoneware (C) Karbate (D) Mild steel

Description : In SO3 absorber (Contact Process), packing material used is of (A) Cast iron (B) Chemical stoneware (C) Karbate (D) Mild steel

Last Answer : (B) Chemical stoneware

. In contact process, SO3 is absorbed in 97% H2SO4 and not in water, because (A) SO3 gas is sparingly soluble in water (B) Water forms an acid mist, which is difficult to absorb (C) The purity of acid is affected (D) Scale formation in the absorber is to be avoided

Description : . In contact process, SO3 is absorbed in 97% H2SO4 and not in water, because (A) SO3 gas is sparingly soluble in water (B) Water forms an acid mist, which is difficult to absorb (C) The purity of acid is affected (D) Scale formation in the absorber is to be avoided

Last Answer : (B) Water forms an acid mist, which is difficult to absorb

Multistage operation (as in the case of catalytic oxidation of SO2 ) is not carried out for NH3 synthesis, because of (A) Comparatively higher pressure drop (B) High cost of the high pressure vessel used for the reactor (C) Higher pumping cost (D) Chances of entrainment and disturbance of catalyst bed

Description : Multistage operation (as in the case of catalytic oxidation of SO2 ) is not carried out for NH3 synthesis, because of (A) Comparatively higher pressure drop (B) High cost of the high pressure ... for the reactor (C) Higher pumping cost (D) Chances of entrainment and disturbance of catalyst bed

Last Answer : (B) High cost of the high pressure vessel used for the reactor

The weight of a pycnometer containing 400 g sand and water full to the top is 2150 g. The weight of pycnometer full of clean water is 1950 g. If specific gravity of the soil is 2.5, the water content is (A) 5 % (B) 10 % (C) 15 % (D) 20 %

Description : The weight of a pycnometer containing 400 g sand and water full to the top is 2150 g. The weight of pycnometer full of clean water is 1950 g. If specific gravity of the soil is 2.5, the water content is (A) 5 % (B) 10 % (C) 15 % (D) 20 %

Last Answer : (D) 20 %

The practical limit of moisture content achieved in air drying of timber is (A) 5 % (B) 15 % (C) 25 % (D) 35

Description : The practical limit of moisture content achieved in air drying of timber is (A) 5 % (B) 15 % (C) 25 % (D) 35 %

Last Answer : Answer: Option B

In petroleum refining, the process used for conversion of hydrocarbons to aromatics is (A) Catalytic cracking (B) Catalytic reforming (C) Hydrotreating (D) Alkylation

Description : In petroleum refining, the process used for conversion of hydrocarbons to aromatics is (A) Catalytic cracking (B) Catalytic reforming (C) Hydrotreating (D) Alkylation

Last Answer : (B) Catalytic reforming

While designing a water supply of an industrial township, industrial and commercial water demand of total supply, is assumed (A) 10 % (B) 10 to 15 % (C) 15 to 20 % (D) 20 to 25 %

Description : While designing a water supply of an industrial township, industrial and commercial water  demand of total supply, is assumed  (A) 10 %  (B) 10 to 15 %  (C) 15 to 20 %  (D) 20 to 25 %

Last Answer : (D) 20 to 25 %

By over-reinforcing a beam, the moment of resistance can be increased not more than (A) 10 % (B) 15 % (C) 20 % (D) 25 %

Description : By over-reinforcing a beam, the moment of resistance can be increased not more than (A) 10 % (B) 15 % (C) 20 % (D) 25 %

Last Answer : Answer: Option D

A 1st class brick immersed in water for 24 hours, should not absorb water (by weight) more than (A) 10 % (B) 15 % (C) 20 % (D) 25 %

Description : A 1st class brick immersed in water for 24 hours, should not absorb water (by weight) more than (A) 10 % (B) 15 % (C) 20 % (D) 25 %

Last Answer : Answer: Option C

A concrete structure is set on fire and the temperature raises to 1000°C. The strength of concrete as compared to original strength reduces to (A) 10 % (B) 15 % (C) 20 % (D) 25 %

Description : A concrete structure is set on fire and the temperature raises to 1000°C. The strength of concrete as compared to original strength reduces to (A) 10 % (B) 15 % (C) 20 % (D) 25 %

Last Answer : Answer: Option C

For the gaseous reaction 2A → B, where the feed consists of 50 mole % A and 50 mole % inerts, the expansion factor is (A) 1 (B) -0.5 (C) -0.25 (D) 0

Description : For the gaseous reaction 2A → B, where the feed consists of 50 mole % A and 50 mole % inerts, the expansion factor is (A) 1 (B) -0.5 (C) -0.25 (D) 0

Last Answer : (C) -0.25

Protein content in cow colostrum(%) a 10 b 12.8 c 14.7 d 16

Description : Protein content in cow colostrum(%) a 10 b 12.8 c 14.7 d 16

Last Answer : b 12.8

What should be the moisture content of the seed if it is stored for long term? a. 12-16% b. 15-18% c. 3-5 % d. 6-8%

Description : What should be the moisture content of the seed if it is stored for long term? a. 12-16% b. 15-18% c. 3-5 % d. 6-8%

Last Answer : d. 6-8%

Pick out the wrong statement. (A) Catalytic converter is fitted in automobiles to reduce carbon monoxide concentration in exhaust emissions (B) Inhalation of pollutant carbon monoxide results in death by asphyxiation (C) Sulphur dioxide is the main pollutant emitted from the exhaust of petrol driven automobiles (D) Decomposition of plants containing chlorophyll is a natural source of carbon monoxide in atmosphere

Description : Pick out the wrong statement. (A) Catalytic converter is fitted in automobiles to reduce carbon monoxide concentration in exhaust emissions (B) Inhalation of pollutant carbon monoxide results ... D) Decomposition of plants containing chlorophyll is a natural source of carbon monoxide in atmosphere

Last Answer : (C) Sulphur dioxide is the main pollutant emitted from the exhaust of petrol driven automobiles

. Catalyst used in the catalytic converter employed in automobiles to convert CO into CO2 and for complete oxidation of un-burnt hydrocarbons is (A) Nickel (B) Cobalt (C) Vanadium (D) Platinum

Description : . Catalyst used in the catalytic converter employed in automobiles to convert CO into CO2 and for complete oxidation of un-burnt hydrocarbons is (A) Nickel (B) Cobalt (C) Vanadium (D) Platinum

Last Answer : (D) Platinum

Catalyst used in the 'catalytic converter' employed in automobile exhaust line for complete combustion/oxidation of carbon monoxide, nitrogen oxides and hydrocarbons is (A) Alumina (B) Platinum (C) Vanadium pentoxide (D) Iron oxide

Description : Catalyst used in the 'catalytic converter' employed in automobile exhaust line for complete combustion/oxidation of carbon monoxide, nitrogen oxides and hydrocarbons is (A) Alumina (B) Platinum (C) Vanadium pentoxide (D) Iron oxide

Last Answer : Option B

The chamber process is (A) Preferred over contact process for producing 98 to 100% H2SO4 and various oleums (B) Non-catalytic and operates only on pyrites (C) A batch process for directly producing high strength (98 to 100%) H2SO4 (D) None of these

Description : The chamber process is (A) Preferred over contact process for producing 98 to 100% H2SO4 and various oleums (B) Non-catalytic and operates only on pyrites (C) A batch process for directly producing high strength (98 to 100%) H2SO4 (D) None of these

Last Answer : (D) None of these

The conversion time of a 12 bit successive approximation A/D converter using a 1 MHz clock is

Last Answer : The conversion time of a 12 bit successive approximation A/D converter using a 1 MHz clock is 12μs.

A 12 bit counter type A/D converter uses a 1 MHz clock. Its maximum conversion time is

Last Answer : A 12 bit counter type A/D converter uses a 1 MHz clock. Its maximum conversion time is 4096μs.