Hydrometer measures the specific gravity of liquids based on the principles of buoyancy. Pycnometer is used to measure the specific gravity of (A) Powder & granular solids (B) Liquids (C) Low melting point semi-solids (D) All 'a', 'b' & 'c

Hydrometer measures the specific gravity of liquids based on the
principles of buoyancy. Pycnometer is used to measure the specific gravity
of
(A) Powder & granular solids
(B) Liquids
(C) Low melting point semi-solids
(D) All 'a', 'b' & 'c
by

1 Answer

Answer :

(D) All 'a', 'b' & 'c
by

Related questions

Hydrometer is used to determine (A) Specific gravity of liquids (B) Specific gravity of solids (C) Specific gravity of gases (D) Relative humidity

Description : Hydrometer is used to determine (A) Specific gravity of liquids (B) Specific gravity of solids (C) Specific gravity of gases (D) Relative humidity

Last Answer : Answer: Option A

A hydrometer indicates specific gravity by comparing the _____________. A. density of a substance in water with the density of the same substance in air B. differences in weight between water and the liquid measured C. mass of substance measured with the density of the same substance D. buoyancy of an object in water with the buoyancy of the same object in the liquid being measured

Description : A hydrometer indicates specific gravity by comparing the _____________. A. density of a substance in water with the density of the same substance in air B. differences in weight between water and the ... of an object in water with the buoyancy of the same object in the liquid being measured

Last Answer : Answer: D

For determine the specific gravity of soil solids, using a pycnometer of 500 cc., the following data is available : Weight of dry empty pycnometer = 125 g Weight of dried soil and pycnometer = 500 g Weight of dried soil and distilled = 850 g water filled in pycnometer up to top The specific gravity of soil solids, is (A) 2.0 (B) 2.25 (C) 2.50 (D) 2.75

Description : For determine the specific gravity of soil solids, using a pycnometer of 500 cc., the following data is available : Weight of dry empty pycnometer = 125 g Weight of dried soil and pycnometer = 500 g Weight of dried soil and distilled ... of soil solids, is (A) 2.0 (B) 2.25 (C) 2.50 (D) 2.75

Last Answer : (C) 2.50

Which of the following statements is not true about triacylglycerols? (a) When solids and semisolids at room temperature, they are called fats. (b) When liquids at room temperature, they are called oils. (c) When hydrolyzed, they produce glycerol and carboxylate salts. (d) Triacylglycerols with low melting points are composed of saturated fatty acids, causing them to be liquids at room temperature

Description : Which of the following statements is not true about triacylglycerols? (a) When solids and semisolids at room temperature, they are called fats. (b) When liquids at room temperature, they are ... low melting points are composed of saturated fatty acids, causing them to be liquids at room temperature

Last Answer : Triacylglycerols with low melting points are composed of saturated fatty acids, causing them to be liquids at room temperature

How can we measure specific gravity of milk? (1) Using a viscometer (2) Using an odometer (3) Using a hygrometer (4) Using a hydrometer

Description : How can we measure specific gravity of milk? (1) Using a viscometer (2) Using an odometer (3) Using a hygrometer (4) Using a hydrometer

Last Answer : (4) Using a hydrometer Explanation: A hydrometer is an instrument that measures the specific gravity of liquids the ratio of the density of the liquid to the density of water.

A hydrometer is used to measure the ____________. A. specific gravity of a battery electrolyte B. water pressure in a deck pipeline C. amount of potable water a vessel is taking on D. power developed by a salt water service pump

Description : A hydrometer is used to measure the ____________. A. specific gravity of a battery electrolyte B. water pressure in a deck pipeline C. amount of potable water a vessel is taking on D. power developed by a salt water service pump

Last Answer : Answer: A

Lactometer is a type of Hydrometer which is used to measure the specific gravity of -----? A. Honey B. Water C. Milk (Answer)

Description : Lactometer is a type of Hydrometer which is used to measure the specific gravity of -----? A. Honey B. Water C. Milk (Answer)

Last Answer : C. Milk (Answer)

A pycnometer is used for the measurement of (A) Flow rate of molten metal (B) Specific gravity of a liquid (C) Composition of alloys (D) Concentration of a solution

Description : A pycnometer is used for the measurement of (A) Flow rate of molten metal (B) Specific gravity of a liquid (C) Composition of alloys (D) Concentration of a solution

Last Answer : Option B

When you check the specific gravity of the battery electrolyte with a hydrometer, it should be kept in mind that ____________. A. the battery is fully charged when the indicator floats low in the electrolyte B. any water that has been previously added to the cells will dilute the solution and give a false reading C. a hydrometer reading is inaccurate if taken immediately after water is added to the cell D. temperature has no effect on hydrometer readings

Description : When you check the specific gravity of the battery electrolyte with a hydrometer, it should be kept in mind that ____________. A. the battery is fully charged when the indicator floats low in ... taken immediately after water is added to the cell D. temperature has no effect on hydrometer readings

Last Answer : Answer: C

The weight of a pycnometer containing 400 g sand and water full to the top is 2150 g. The weight of pycnometer full of clean water is 1950 g. If specific gravity of the soil is 2.5, the water content is (A) 5 % (B) 10 % (C) 15 % (D) 20 %

Description : The weight of a pycnometer containing 400 g sand and water full to the top is 2150 g. The weight of pycnometer full of clean water is 1950 g. If specific gravity of the soil is 2.5, the water content is (A) 5 % (B) 10 % (C) 15 % (D) 20 %

Last Answer : (D) 20 %

A pycnometer is used to determine (A) Water content and voids ratio (B) Specific gravity and dry density (C) Water content and specific gravity (D) Voids ratio and dry density

Description : A pycnometer is used to determine (A) Water content and voids ratio (B) Specific gravity and dry density (C) Water content and specific gravity (D) Voids ratio and dry density

Last Answer : (C) Water content and specific gravity

The total weight of a pycnometer with water and oven dried soil 20 (g) is 1600 g. The pycnometer filled with water alone weighs 1500 g. The specific gravity of the soil, is (A) 1.0 (B) 1.5 (C) 2.0 (D) 2.5

Description : The total weight of a pycnometer with water and oven dried soil 20 (g) is 1600 g. The pycnometer filled with water alone weighs 1500 g. The specific gravity of the soil, is (A) 1.0 (B) 1.5 (C) 2.0 (D) 2.5

Last Answer : (C) 2.0

260 g of wet soil was taken in a pycnometer jar of weight 400 g in order to find the moisture content in the soil, with specific gravity of soil particles 2.75. The weight of soil and remaining water filled in pycnometer without air bubbles was 1415 g and the weight of pycnometer filled with water alone was 1275 g. The moisture content in the soil is (A) 24.2 % (B) 18.2 % (C) 53.8 % (D) None of these

Description : 260 g of wet soil was taken in a pycnometer jar of weight 400 g in order to find the moisture content in the soil, with specific gravity of soil particles 2.75. The weight of soil and remaining water filled in pycnometer without air ... is (A) 24.2 % (B) 18.2 % (C) 53.8 % (D) None of these

Last Answer : Answer: Option B

Write step by step procedure to determine specific gravity of soil by pycnometer in laboratory.

Description : Write step by step procedure to determine specific gravity of soil by pycnometer in laboratory.

Last Answer : 1. Clean the pycnometer and dry it, find the mass of pycnometer, brass cap and washer accurate to 1g. say M1 2. Put about 200gm to 400gm of wet soil sample in pycnometer and find its mass with its cap ... it top of cap and find its weight say M4. 5. The specific gravity is calculated by 

Define specific gravity of soil. Explain the stepwise procedure of determination of specific gravity of soil by pycnometer.

Description : Define specific gravity of soil. Explain the stepwise procedure of determination of specific gravity of soil by pycnometer. 

Last Answer : Specific Gravity: It is ratio of unit weight in air of a given volume of soil solids at a specific temperature to unit weight in air of an equal volume of distilled water at same temperature. ... Repeat all above steps two more times to calculate average specific gravity of given soil sample.

Write step by step procedure for determination of specific gravity by pycnometer bottle.

Description : Write step by step procedure for determination of specific gravity by pycnometer bottle. 

Last Answer : Procedure for determination of specific gravity by pycnometer bottle: 1. Clean the pycnometer bottle and dry it. Take the weight of empty pycnometer with conical cap as W1' gm. 2. Oven dry the ... 8. Repeat all above steps two more times to calculate average specific gravity of given soil sample.

Reciprocating screens are normally inclined at an angle of 5° with the horizontal and employ gyratory motion at feed end & reciprocating motion at the discharge end. They are not suitable for the screening of the (A) Light metal powder down upto 4 mesh size (B) Dry chemicals (C) Heavy tonnages of rocks or gravel (D) Powdered food & granular materials

Description : Reciprocating screens are normally inclined at an angle of 5° with the horizontal and employ gyratory motion at feed end & reciprocating motion at the discharge end. They are not suitable for the ... Dry chemicals (C) Heavy tonnages of rocks or gravel (D) Powdered food & granular materials

Last Answer : (C) Heavy tonnages of rocks or gravel

Safety fuse wire used in domestic electrical appliances is made of metal of low (1) Resistance (2) Melting point (3) Specific gravity (4) Conductance

Description : Safety fuse wire used in domestic electrical appliances is made of metal of low (1) Resistance (2) Melting point (3) Specific gravity (4) Conductance

Last Answer : (2) Melting point Explanation: The fuse wire is based on the Joules law of heating which says that when the electric current is allowed to pass through a conductor, the conductor heats up and is ... . For this purpose the material used as fuse wire should have high resistance and low melting point.

Safety fuse wire used in domestic electrical appliances is made of metal of low (1) Resistance (2) Melting point (3) Specific gravity (4) Conductance

Description : Safety fuse wire used in domestic electrical appliances is made of metal of low (1) Resistance (2) Melting point (3) Specific gravity (4) Conductance

Last Answer : Melting point

Pick out the wrong statement. (A) Surface tension of a liquid is because of the difference in magnitude of adhesive & cohesive forces(B) A hydrometer used for the determination of specific gravities of liquidsworks on the principle of buoyant forces(C) In case of unsteady fluid flow, the velocity at any given point does notchange with time(D) Turbulent fluid flow is characterised by the rapid fluctuation ofinstantaneous pressure & velocity at a poin

Description : Pick out the wrong statement. (A) Surface tension of a liquid is because of the difference in magnitude of adhesive & cohesive forces (B) A hydrometer used for the determination of ... Turbulent fluid flow is characterised by the rapid fluctuation of instantaneous pressure & velocity at a poin

Last Answer : (C) In case of unsteady fluid flow, the velocity at any given point does not change with time

Which of the following represents the corrected specific gravity of a lead acid battery, with a temperature of 90°F, and a hydrometer reading of 1160? A. 1150 B. 1156 C. 1160 D. 1164

Description : Which of the following represents the corrected specific gravity of a lead acid battery, with a temperature of 90°F, and a hydrometer reading of 1160? A. 1150 B. 1156 C. 1160 D. 1164

Last Answer : Answer: D

The specific gravity of the electrolyte in a lead-acid battery is measured by a _____________. A. gould plate B. titration pipette C. hydrometer D. litmus paper test

Description : The specific gravity of the electrolyte in a lead-acid battery is measured by a _____________. A. gould plate B. titration pipette C. hydrometer D. litmus paper test

Last Answer : Answer: C

To determine the state of charge of a nickel-cadmium battery, you should ___________. A. check the electrolyte with a hydrometer B. use the constant specific gravity method C. use a nonbreakable mercury thermometer D. connect a voltmeter to the battery terminals

Description : To determine the state of charge of a nickel-cadmium battery, you should ___________. A. check the electrolyte with a hydrometer B. use the constant specific gravity method C. use a nonbreakable mercury thermometer D. connect a voltmeter to the battery terminals

Last Answer : Answer: D

When checking the specific gravity of the battery electrolyte with a hydrometer, you should be aware that ________________. A. the battery is fully charged when the float sinks deepest into the electrolyte B. the battery is discharged when the float is highest in the electrolyte C. a hydrometer reading is accurate if taken immediately after water is added to the cell D. warm temperatures will lower the specific gravity of the electrolyte

Description : When checking the specific gravity of the battery electrolyte with a hydrometer, you should be aware that ________________. A. the battery is fully charged when the float sinks deepest into the ... is added to the cell D. warm temperatures will lower the specific gravity of the electrolyte

Last Answer : Answer: D

Which of the following statements concerning the specific gravity of a battery electrolyte is true? A. The electrolyte becomes less dense when it is cooled. B. The specific gravity reading is lowered when the electrolyte is heated. C. The most accurate hydrometer reading is obtained immediately after water is added. D. The temperature does not affect the specific gravity of the electrolyte.

Description : Which of the following statements concerning the specific gravity of a battery electrolyte is true? A. The electrolyte becomes less dense when it is cooled. B. The specific gravity reading is lowered ... water is added. D. The temperature does not affect the specific gravity of the electrolyte.

Last Answer : Answer: B

Solids and liquids have  (a) one value of specific heat (ft) two values of specific heat  (c) three values of specific heat  (d) no value of specific heat  (e) one value under some conditions and two values under other conditions.

Description : Solids and liquids have  (a) one value of specific heat (ft) two values of specific heat  (c) three values of specific heat  (d) no value of specific heat  (e) one value under some conditions and two values under other conditions.

Last Answer : Answer : a

__________ are mixed using ribbon blenders. (A) Lumpy solids and low viscosity liquids (B) Dry powders (C) High viscosity liquids (D) Thick pastes

Description : __________ are mixed using ribbon blenders. (A) Lumpy solids and low viscosity liquids (B) Dry powders (C) High viscosity liquids (D) Thick pastes

Last Answer : (B) Dry powders

Pick out the wrong statement. (A) Low intensity explosives are also called propellants, whereas high intensity explosive are called detonators (B) Gun powder comprises of 75% salt petre, 15% charcoal and 10% sulphur (C) Lead azide is a popular military explosive (D) TNT is a hygroscopic explosive having very high melting point and is non-toxic to human being

Description : Pick out the wrong statement. (A) Low intensity explosives are also called propellants, whereas high intensity explosive are called detonators (B) Gun powder comprises of 75% salt petre, 15% charcoal ... TNT is a hygroscopic explosive having very high melting point and is non-toxic to human being

Last Answer : (D) TNT is a hygroscopic explosive having very high melting point and is non-toxic to human being

Pick out the wrong statement. (A) Nitrogen is normally supplied in fertiliser either in Ammoniacal or the nitrate form, from which the soil takes it up in the form of ammonium ions ornitrate ions and forms amino acids(B) Calcium present in the fertiliser helps in correcting the soil acidity(C) Particle size range of a good granular fertiliser is 10-15 mesh and itcontains less moisture as compared to finely divided powder form of fertiliser(D) Ammonium nitrate fertiliser is obtained as a by-product in an integratedsteel plant having by-product coke ovens

Description : Pick out the wrong statement. (A) Nitrogen is normally supplied in fertiliser either in Ammoniacal or the nitrate form, from which the soil takes it up in the form of ammonium ions ornitrate ... nitrate fertiliser is obtained as a by-product in an integrated steel plant having by-product coke ovens

Last Answer : (D) Ammonium nitrate fertiliser is obtained as a by-product in an integrated steel plant having by-product coke ovens

Particulate' air pollutants are finely divided solids and liquids. Which of the following is not a ‘particulate’? (A) Dust & mists(B) Smoke & fumes(C) Photochemical smog & soot(D) None of these

Description : Particulate' air pollutants are finely divided solids and liquids. Which of the following is not a ‘particulate’? (A) Dust & mists (B) Smoke & fumes (C) Photochemical smog & soot (D) None of these

Last Answer : (D) None of these

Kopp's rule is used to calculate the heat capacity of (A) Solids (B) Liquids (C) Gases (D) All (A), (B) & (C)

Description : Kopp's rule is used to calculate the heat capacity of (A) Solids (B) Liquids (C) Gases (D) All (A), (B) & (C)

Last Answer : (A) Solids

For a stable equilibrium of a submerged body (where, G and B are centres of gravity & buoyancy respectively). (A) G is above B (B) B is above G (C) B & G coincide (D) None of these

Description : For a stable equilibrium of a submerged body (where, G and B are centres of gravity & buoyancy respectively). (A) G is above B (B) B is above G (C) B & G coincide (D) None of these

Last Answer : (B) B is above G

Which parameter is used for the grading of paraffin waxes? (A) Specific gravity (B) Melting point (C) Viscosity (D) Penetration number

Description : Which parameter is used for the grading of paraffin waxes? (A) Specific gravity (B) Melting point (C) Viscosity (D) Penetration number

Last Answer : (C) Viscosity

The centre of percussions is a.The point of application of the resultant of all the forces tending to cause a body to rotate about a central axis b.The point of application of the resultant of gravity and buoyancy forces of the body c.The same as centre of gravity d.The metacentre of the body e.The point in a body about which it can rotate horizontally and oscillates under the influence of gravity

Description : The centre of percussions is a.The point of application of the resultant of all the forces tending to cause a body to rotate about a central axis b.The point of application of the resultant ... .The point in a body about which it can rotate horizontally and oscillates under the influence of gravity

Last Answer : a. The point of application of the resultant of all the forces tending to cause a body to rotate about a central axis

When a body, floating in a liquid, is given a small angular displacement, it starts oscillating about a point known as (A) Centre of pressure (B) Centre of gravity (C) Centre of buoyancy (D) Metacentre

Description : When a body, floating in a liquid, is given a small angular displacement, it starts oscillating about a point known as (A) Centre of pressure (B) Centre of gravity (C) Centre of buoyancy (D) Metacentre

Last Answer : Answer: Option D

Choose the wrong statement (A) Any weight, floating or immersed in a liquid, is acted upon by a buoyant force (B) Buoyant force is equal to the weight of the liquid displaced (C) The point through which buoyant force acts, is called the center of buoyancy (D) Center of buoyancy is located above the center of gravity of the displaced liquid

Description : Choose the wrong statement (A) Any weight, floating or immersed in a liquid, is acted upon by a buoyant force (B) Buoyant force is equal to the weight of the liquid displaced (C) The ... the center of buoyancy (D) Center of buoyancy is located above the center of gravity of the displaced liquid

Last Answer : Answer: Option D

The point in the immersed body through which the resultant pressure of the liquid may be taken to act is known as (A) Meta center (B) Center of pressure (C) Center of buoyancy (D) Center of gravity

Description : The point in the immersed body through which the resultant pressure of the liquid may be taken to act is known as (A) Meta center (B) Center of pressure (C) Center of buoyancy (D) Center of gravity

Last Answer : Answer: Option B

Which of the following decreases with increase in pressure? (A) Melting point of ice (B) Melting point of wax (C) Boiling point of liquids (D) None of these

Description : Which of the following decreases with increase in pressure? (A) Melting point of ice (B) Melting point of wax (C) Boiling point of liquids (D) None of these

Last Answer : (A) Melting point of ice

Pycnometer is an instrument used to measure the – (1) Density (2) Intensity of solar radiation (3) Intensity of earthquake (4) High temperatures

Description : Pycnometer is an instrument used to measure the – (1) Density (2) Intensity of solar radiation (3) Intensity of earthquake (4) High temperatures

Last Answer : (1) Density Explanation: A gas pycnometer is a laboratory device used for measuring the density - or more accurately the volume - of solids, be they regularly shaped, porous or non-porous, ... , employing some method of has displacement and the volume-pressure relationship known as Boyle's Law.

Pycnometer is an instrument used to measure the (1) density (2) intensity of solar radiation (3) intensity of earthquake (4) high temperatures

Description : Pycnometer is an instrument used to measure the (1) density (2) intensity of solar radiation (3) intensity of earthquake (4) high temperatures

Last Answer : density

The melting and boiling points of ionic solids are (a) High (b) Low (c) Very low (d) Of intermediate range

Description : The melting and boiling points of ionic solids are (a) High (b) Low (c) Very low (d) Of intermediate range

Last Answer : Ans:(a)

In primary sedimentation, the 0.2 mm inorganic solids get separated if specific gravity is A. 2.25 B. 2.50 C. 2.55 D. 2.65

Description : In primary sedimentation, the 0.2 mm inorganic solids get separated if specific gravity is A. 2.25 B. 2.50 C. 2.55 D. 2.65

Last Answer : ANS: D

Addition of water in milk will: C A. Increase the special gravity B. Increase the total solids C. Decrease the specific gravity D. Not change the specific gravity

Description : Addition of water in milk will: C A. Increase the special gravity B. Increase the total solids C. Decrease the specific gravity D. Not change the specific gravity

Last Answer : Decrease the specific gravity

Addition of water in milk will: C A. Increase the special gravity B. Increase the total solids C. Decrease the specific gravity D. Not change the specific gravity

Description : Addition of water in milk will: C A. Increase the special gravity B. Increase the total solids C. Decrease the specific gravity D. Not change the specific gravity

Last Answer : Decrease the specific gravity

Addition of water in milk will: C A. Increase the special gravity B. Increase the total solids C. Decrease the specific gravity D. Not change the specific gravity

Description : Addition of water in milk will: C A. Increase the special gravity B. Increase the total solids C. Decrease the specific gravity D. Not change the specific gravity

Last Answer : Decrease the specific gravity

According to the Indian Standards the specific gravity is the ratio of the unit weight of soil solids to that of water at a temperature of (A) 17°C (B) 23°C (C) 27°C (D) 30°C

Description : According to the Indian Standards the specific gravity is the ratio of the unit weight of soil solids to that of water at a temperature of (A) 17°C (B) 23°C (C) 27°C (D) 30°C

Last Answer : (C) 27°C

If dry density, water density and specific gravity of solids of a given soil sample are 1.6 g/cc, 1.84 g/cc and 2.56 respectively, the porosity of the soil sample, is (A) 0.375 (B) 0.370 (C) 0.380 (D) 0.390

Description : If dry density, water density and specific gravity of solids of a given soil sample are 1.6 g/cc, 1.84 g/cc and 2.56 respectively, the porosity of the soil sample, is (A) 0.375 (B) 0.370 (C) 0.380 (D) 0.390

Last Answer : (A) 0.375

The ratio of the weight of given volume of soil solids to the weight of an equal volume of distilled water at the given temperature, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content

Description : The ratio of the weight of given volume of soil solids to the weight of an equal volume of distilled water at the given temperature, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content

Last Answer : (B) Specific gravity

The ratio of the volume of voids to the volume of soil solids in a given soil mass, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content

Description : The ratio of the volume of voids to the volume of soil solids in a given soil mass, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content

Last Answer : (C) Void ratio

A soil mass coated with a thin layer of paraffin weighs 460 g. When immersed, it displaces 299 cc of water. The weight of paraffin is 10 g. If specific gravity of solids is 2.5 and that of paraffin 0.9, the void ratio of soil, is (A) 0.55 (B) 0.60 (C) 0.65 (D) 0.70

Description : A soil mass coated with a thin layer of paraffin weighs 460 g. When immersed, it displaces 299 cc of water. The weight of paraffin is 10 g. If specific gravity of solids is 2.5 and that of paraffin 0.9, the void ratio of soil, is (A) 0.55 (B) 0.60 (C) 0.65 (D) 0.70

Last Answer : Answer: Option B