The width of the analogous column in the method of column analogy is (A) 2/EI (B) 1/EI (C) 1/2 EI (D) 1/4 EI

The width of the analogous column in the method of column analogy is
(A) 2/EI
(B) 1/EI
(C) 1/2 EI
(D) 1/4 EI
by

1 Answer

Answer :

(B) 1/EI
by

Related questions

The degree of static indeterminacy up to which column analogy method can be used is (A) 2 (B) 3 (C) 4 (D) Unrestricted

Description : The degree of static indeterminacy up to which column analogy method can be used is (A) 2 (B) 3 (C) 4 (D) Unrestricted

Last Answer : (B) 3

Which of the following methods of structural analysis is a displacement method? (A) Moment distribution method (B) Column analogy method (C) Three moment equation (D) None of the above

Description : Which of the following methods of structural analysis is a displacement method? (A) Moment distribution method (B) Column analogy method (C) Three moment equation (D) None of the above

Last Answer : (A) Moment distribution method

Which of the following is not the displacement method? (A) Equilibrium method (B) Column analogy method (C) Moment distribution method (D) Kani's method

Description : Which of the following is not the displacement method? (A) Equilibrium method (B) Column analogy method (C) Moment distribution method (D) Kani's method

Last Answer : (B) Column analogy method

Which of the following methods of structural analysis is a force method? (A) Slope deflection method (B) Column analogy method (C) Moment distribution method (D) None of the above

Description : Which of the following methods of structural analysis is a force method? (A) Slope deflection method (B) Column analogy method (C) Moment distribution method (D) None of the above

Last Answer : (B) Column analogy method

Euler's formula states that the buckling load for a column of length , both ends hinged and whose least moment of inertia and modulus of elasticity of the material of the column are and respectively, is given by the relation (A) P = ²EI/l² (B) P = /EI (C) P = /l² (D) P = ²EI/l

Description : Euler's formula states that the buckling load for a column of length , both ends hinged and whose least moment of inertia and modulus of elasticity of the material of the column are and respectively, is given by the relation (A) P = ²EI/l² (B) P = /EI (C) P = /l² (D) P = ²EI/l

Last Answer : (A) P = ²EI/l²

Pick out the wrong statement pertaining to the analogy between equations of heat and mass transfer operations. (A) Sherwood number in mass transfer is analogous to Nusselt number in heat transfer (B) Prandtl number in heat transfer is analogous to Schmidt number in mass transfer (C) Reynolds number in mass transfer is analogous to Grashoff number in heat transfer (D) Reynolds number remains the same in both heat and mass transfer

Description : Pick out the wrong statement pertaining to the analogy between equations of heat and mass transfer operations. (A) Sherwood number in mass transfer is analogous to Nusselt number in heat transfer ... heat transfer (D) Reynolds number remains the same in both heat and mass transfer

Last Answer : (C) Reynolds number in mass transfer is analogous to Grashoff number in heat transfer

Write the analogous electrical elements in force current analogy for the elements of mechanical translational system.

Description : Write the analogous electrical elements in force current analogy for the elements of mechanical translational system.

Last Answer : Force-current I Velocity v-voltage v Displacement x-flux_ Frictional coeff B-conductance 1/R Mass M- capacitance C Stiffness K-Inverse of inductance 1/L

Write the analogous electrical elements in force voltage analogy for the elements of mechanical translational system.

Description : Write the analogous electrical elements in force voltage analogy for the elements of mechanical translational system.

Last Answer : Force-voltage e Velocity v-current i Displacement x-charge q Frictional coeff B-Resistance R Mass M- Inductance L Stiffness K-Inverse of capacitance 1/C

In Torque-Voltage analogy, the Moment of Inertia of a mechanical rotational system is analogous to

Description : In Torque-Voltage analogy, the Moment of Inertia of a mechanical rotational system is analogous to (A) Capacitance C. (B) Inductance L. (C) Resistance R. (D) Inductive reactance XL

Last Answer : In Torque-Voltage analogy, the Moment of Inertia of a mechanical rotational system is analogous to Inductance L.

Spring constant in force-voltage analogy is analogous to?

Description : Spring constant in force-voltage analogy is analogous to?

Last Answer : Spring constant in force-voltage analogy is analogous to reciprocal of capacitance.

Mass, in force-voltage analogy, is analogous to?

Description : Mass, in force-voltage analogy, is analogous to?

Last Answer : Mass, in force-voltage analogy, is analogous to the inductance.

In thermal-electrical analogy charge is considered analogous to?

Description : In thermal-electrical analogy charge is considered analogous to?

Last Answer : In thermal-electrical analogy charge is considered analogous to temperature.

In force-voltage analogy, velocity is analogous to?

Description : In force-voltage analogy, velocity is analogous to?

Last Answer : In force-voltage analogy, velocity is analogous to current.

The viscous friction co-efficient, in force-voltage analogy, is analogous to?

Description : The viscous friction co-efficient, in force-voltage analogy, is analogous to?

Last Answer : The viscous friction co-efficient, in force-voltage analogy, is analogous to resistance.

In liquid level and electrical system analogy, voltage is considered analogous to?

Description : In liquid level and electrical system analogy, voltage is considered analogous to?

Last Answer : In liquid level and electrical system analogy, voltage is considered analogous to head.

In electrical-pneumatic system analogy the current is considered analogous to?

Description : In electrical-pneumatic system analogy the current is considered analogous to?

Last Answer : In electrical-pneumatic system analogy the current is considered analogous to air flow rate.

The temperature, under thermal and electrical system analogy, is considered analogous to?

Description : The temperature, under thermal and electrical system analogy, is considered analogous to?

Last Answer : The temperature, under thermal and electrical system analogy, is considered analogous to voltage.

The capacitance, in force-current analogy, is analogous to?

Description : The capacitance, in force-current analogy, is analogous to?

Last Answer : The capacitance, in force-current analogy, is analogous to mass.

Differences in deflections between two points A and B by the moment area method is given by a.(Area of BMD diagram between A and B ).XB/2EI. b.(Area of BMD diagram between A and B).XB/3EI c.(Area of BMD diagram between A and B) .XB/EI d.None.

Description : Differences in deflections between two points A and B by the moment area method is given by a.(Area of BMD diagram between A and B ).XB/2EI. b.(Area of BMD diagram between A and B).XB/3EI c.(Area of BMD diagram between A and B) .XB/EI d.None.

Last Answer : c.(Area of BMD diagram between A and B) .XB/EI

.Differences in slopes between two points A and B by the moment area method is given by a.Area of BMD diagram between A and B /2EI. b.Area of BMD diagram between A and B /3EI. C.Area of BMD diagram between A and B /EI d.None.

Description : .Differences in slopes between two points A and B by the moment area method is given by a.Area of BMD diagram between A and B /2EI. b.Area of BMD diagram between A and B /3EI. C.Area of BMD diagram between A and B /EI d.None.

Last Answer : C.Area of BMD diagram between A and B /EI

The maximum deflection of a simply supported beam of span L, carrying an isolated load at the centre of the span; flexural rigidity being EI, is (A) WL3 /3EL (B) WL3 /8EL (C) WL3 /24EL (D) WL3 /48EL

Description : The maximum deflection of a simply supported beam of span L, carrying an isolated load at the  centre of the span; flexural rigidity being EI, is  (A) WL3 /3EL (B) WL3 /8EL (C) WL3 /24EL (D) WL3 /48EL

Last Answer : (D) WL3 /48EL

The maximum deflection due to a load W at the free end of a cantilever of length L and having flexural rigidity EI, is (A) WL²/2EI (B) WL²/3EI (C) WL3 /2EI (D) WL3 /3EI

Description : The maximum deflection due to a load W at the free end of a cantilever of length L and having  flexural rigidity EI, is  (A) WL²/2EI (B) WL²/3EI (C) WL3 /2EI (D) WL3 /3EI

Last Answer : (D) WL3 /3EI

The maximum deflection due to a uniformly distributed load w/unit length over entire span of a cantilever of length l and of flexural rigidly EI, is (A) wl3 /3EI (B) wl4 /3EI (C) wl4 /8EI (D) wl4 /12E

Description : The maximum deflection due to a uniformly distributed load w/unit length over entire span of a  cantilever of length l and of flexural rigidly EI, is  (A) wl3 /3EI (B) wl4 /3EI (C) wl4 /8EI (D) wl4 /12E

Last Answer : (C) wl4 /8EI

A cantilever of length is subjected to a bending moment at its free end. If EI is the flexural rigidity of the section, the deflection of the free end, is (A) ML/EI (B) ML/2EI (C) ML²/2EI (D) ML²/3EI

Description : A cantilever of length is subjected to a bending moment at its free end. If EI is the flexural  rigidity of the section, the deflection of the free end, is  (A) ML/EI (B) ML/2EI (C) ML²/2EI (D) ML²/3EI

Last Answer : (D) ML²/3EI

The deflection due to couple M at the free end of a cantilever length L is (A) ML/EI (B) 2ML/EI (C) ML²/2E(D) M²L/2EI

Description : The deflection due to couple M at the free end of a cantilever length L is  (A) ML/EI (B) 2ML/EI (C) ML²/2E (D) M²L/2EI

Last Answer : (C) ML²/2EI

The energy stored in a beam of length subjected to a constant B.M. is (A) M²L/2EI (B) ML²/2EI (C) M²L/EI (D) ML²/EI

Description : The energy stored in a beam of length subjected to a constant B.M. is  (A) M²L/2EI (B) ML²/2EI (C) M²L/EI (D) ML²/EI

Last Answer : (A) M²L/2E

A cantilever carries is uniformly distributed load W over its whole length and a force W acts at its free end upward. The net deflection of the free end will be (A) Zero (B) (5/24) (WL3 /EI) upward (C) (5/24) (WL3 /EI) downward (D) None of these

Description : A cantilever carries is uniformly distributed load W over its whole length and a force W acts at its  free end upward. The net deflection of the free end will be  (A) Zero  (B) (5/24) (WL3 /EI) upward  (C) (5/24) (WL3 /EI) downward  (D) None of these 

Last Answer : (B) (5/24) (WL3 /EI) upward

The effective width of a column strip of a flat slab, is (A) One-fourth the width of the panel (B) Half the width of the panel (C) Radius of the column (D) Diameter of the column

Description : The effective width of a column strip of a flat slab, is (A) One-fourth the width of the panel (B) Half the width of the panel (C) Radius of the column (D) Diameter of the column

Last Answer : Answer: Option B

Slenderness ratio of the column is the ratio of [ A ] the effective length to width of column [ B ] the effective length to depth of column [ C ] the effective length to least lateral design [ D ] none of the above

Description : Slenderness ratio of the column is the ratio of [ A ] the effective length to width of column [ B ] the effective length to depth of column [ C ] the effective length to least lateral design [ D ] none of the above

Last Answer : [ C ] the effective length to least lateral design

Different learning method does not include: a) Memorization b) Analogy c) Deduction d) Introduction

Description : Different learning method does not include: a) Memorization b) Analogy c) Deduction d) Introduction

Last Answer : d) Introduction

Now here are some more words. Complete them with ei or ie. Consult a dictionary if necessary. -English 9th

Description : Now here are some more words. Complete them with ei or ie. Consult a dictionary if necessary. -English 9th

Last Answer : believe; receive; weird; leisure; seize; weight; reign; feign; grief; pierce This rule is applicable only in the case of ‘believe’ ‘grief’ and ‘pierce’ words. The other words have ei instead of ie.

A : EI Nino is a climatic change which causes deleterious environmental changes. R : Increased trophospheric ozone due to El Nino cause shift of clima

Description : A : EI Nino is a climatic change which causes deleterious environmental changes. R : Increased trophospheric ozone due to El Nino cause shift of clima

Last Answer : A : EI Nino is a climatic change which causes deleterious environmental changes. R : Increased trophospheric ... and Reason are false, then mark (4).

Which among the following is the value of static deflection (δ) for a fixed beam with central point load? A ( Wl 3 ) /(192 EI) B ( Wl 2 ) /(192 EI) C (Wl 3 ) /(384 EI) D None of the above

Description : Which among the following is the value of static deflection (δ) for a fixed beam with central point load? A ( Wl 3 ) /(192 EI) B ( Wl 2 ) /(192 EI) C (Wl 3 ) /(384 EI) D None of the above

Last Answer : A ( Wl 3 ) /(192 EI)

Which among the following is the value of static deflection (δ) for a fixed beam with central point load? a. (Wl 3 ) /(192 EI) b. (Wl 2 ) /(192 EI) c. (Wl 3 ) /(384 EI)

Description : Which among the following is the value of static deflection (δ) for a fixed beam with central point load? a. (Wl 3 ) /(192 EI) b. (Wl 2 ) /(192 EI) c. (Wl 3 ) /(384 EI)

Last Answer : a. (Wl 3 ) /(192 EI)

The expression EI d4y/dx4 at a section of a member represents a. Shearing force b. rate of loading c. bending moment d.slope.

Description : The expression EI d4y/dx4 at a section of a member represents a. Shearing force b. rate of loading c. bending moment d.slope.

Last Answer : b. rate of loading

.The expression EI d3y/dx3 at a section of a member represents a.Shearing force b.rate of loading c.bending moment d.slope.

Description : .The expression EI d3y/dx3 at a section of a member represents a.Shearing force b.rate of loading c.bending moment d.slope.

Last Answer : a.Shearing force

The expression EI d2y/dx2 at a section of a member represents a. Shearing force b.rate of loading c.bending moment d.slope.

Description : The expression EI d2y/dx2 at a section of a member represents a. Shearing force b.rate of loading c.bending moment d.slope.

Last Answer : c.bending moment

.Maximum slope in a cantilever beam with a Moment M at the free end will be a. 3ML/EI. b.2ML/EI. C. ML/EI. d. None.

Description : .Maximum slope in a cantilever beam with a Moment M at the free end will be a. 3ML/EI. b.2ML/EI. C. ML/EI. d. None.

Last Answer : C. ML/EI.

Maximum slope in a S.S beam with UDL w at the entire span will be a. wl3/ 16EI. b.wl3/ 24EI. c. wl3/ 48 EI. d.None

Description : Maximum slope in a S.S beam with UDL w at the entire span will be a. wl3/ 16EI. b.wl3/ 24EI. c. wl3/ 48 EI. d.None

Last Answer : b.wl3/ 24EI.

Which of the following is a differential equation for deflection? a.dy / dx = (M/EI) b. dy / dx = (MI/E) c.d2y / dx2 = (M/EI) d.d2y / dx2 = (ME/I)

Description : Which of the following is a differential equation for deflection? a.dy / dx = (M/EI) b. dy / dx = (MI/E) c.d2y / dx2 = (M/EI) d.d2y / dx2 = (ME/I)

Last Answer : c.d2y / dx2 = (M/EI)

Deflection of a simply supported beam when subjected to central point load is given as ________ a. (Wl /16 EI) b. (Wl2/16 EI) c. (Wl3/48 EI) d. (5Wl4/ 384EI)

Description : Deflection of a simply supported beam when subjected to central point load is given as ________ a. (Wl /16 EI) b. (Wl2/16 EI) c. (Wl3/48 EI) d. (5Wl4/ 384EI)

Last Answer : c. (Wl3/48 EI)

For transmission line, the incident voltage Ei = 6V, and Er = 3V. Calculate: (1) Reflection coefficient (2) Standing wave ratio

Description : For transmission line, the incident voltage Ei = 6V, and Er = 3V. Calculate: (1) Reflection coefficient (2) Standing wave ratio

Last Answer : (1)Reflection coefficient  (2) Standing wave ratio (1)Reflection coefficient Reflection coefficient R=Er/Ei  =3/6  R=0.5 (2) Standing wave ratio SWR=Ei+Er/Ei-Er  =6+3/6-3  SWR =3

For a transmission line, the incident voltage. Ei = 6V and Er =2V ,Calculate: (i) Reflection Coefficient (ii) SWR

Description : For a transmission line, the incident voltage. Ei = 6V and Er =2V ,Calculate: (i) Reflection Coefficient (ii) SWR

Last Answer : Reflection Coefficient(K) = Er / Ei  = 2V / 6V  K = 0.333 SWR = 1+K / 1- K  = 1+0.333 / 1-0.333  = 1.333 / 0.667 SWR= 1.998

To instruct Wordto fit the width ofa column to the contents ofa table automatically, click the button and then point to AutoFit Contents. (A) Fit to Form (B) Format (C) Autosize (D) Contents (E) AutoFit

Description : To instruct Wordto fit the width ofa column to the contents ofa table automatically, click the button and then point to AutoFit Contents. (A) Fit to Form (B) Format (C) Autosize (D) Contents (E) AutoFit

Last Answer : AutoFit

To instruct Word to fit the width of a column to the contents of a table automatically, click the _____button and then point to Auto Fit Contents: a) Fit to Form b) Format c) Auto Size d) Contents e) Auto Fit

Description : To instruct Word to fit the width of a column to the contents of a table automatically, click the _____button and then point to Auto Fit Contents: a) Fit to Form b) Format c) Auto Size d) Contents e) Auto Fit

Last Answer : a) Fit to Form

Column efficiency is measured in terms of number of theoretical plates, which is: A. Inversely related to height equivalent to theoretical plates B. Directly related to the peak width C. Directly related to height equivalent to theoretical plates D. Inversely related to the peak width

Description : Column efficiency is measured in terms of number of theoretical plates, which is: A. Inversely related to height equivalent to theoretical plates B. Directly related to the peak width C. Directly related to height equivalent to theoretical plates D. Inversely related to the peak width

Last Answer : Inversely related to height equivalent to theoretical plates 

What is the difference between a homologous and analogous structure?

Description : What is the difference between a homologous and analogous structure?

Last Answer : A: Homologous structures are anatomical features that have a similar evolutionary origin, but may have different functions, while analogous structures are anatomical features that have a similar function, but may have different evolutionary origins.

What is the difference between a homologous and an analogous structure?

Description : What is the difference between a homologous and an analogous structure?

Last Answer : A: Homologous structures are similar in structure and origin, but may have different functions, while analogous structures have similar functions but evolved independently and have different origins.

What factions are analogous to Earth nations in the Star Trek Universe?

Description : What factions are analogous to Earth nations in the Star Trek Universe?

Last Answer : USA is the Klingon and China is the Rolumulans. Japan is Vulcan. Canada is Bajorin. Russia is Cardasian.