Which of the following methods of structural analysis is a displacement method? (A) Moment distribution method (B) Column analogy method (C) Three moment equation (D) None of the above

Which of the following methods of structural analysis is a displacement method?
(A) Moment distribution method
(B) Column analogy method
(C) Three moment equation
(D) None of the above
by

1 Answer

Answer :

(A) Moment distribution method
by

Related questions

Which of the following methods of structural analysis is a force method? (A) Slope deflection method (B) Column analogy method (C) Moment distribution method (D) None of the above

Description : Which of the following methods of structural analysis is a force method? (A) Slope deflection method (B) Column analogy method (C) Moment distribution method (D) None of the above

Last Answer : (B) Column analogy method

Which of the following is not the displacement method? (A) Equilibrium method (B) Column analogy method (C) Moment distribution method (D) Kani's method

Description : Which of the following is not the displacement method? (A) Equilibrium method (B) Column analogy method (C) Moment distribution method (D) Kani's method

Last Answer : (B) Column analogy method

The moment-distribution method in structural analysis falls in the category of (a) Displacement method (b) Force method (c) Flexibility method (d) First order approximate method

Description : The moment-distribution method in structural analysis falls in the category of (a) Displacement method (b) Force method (c) Flexibility method (d) First order approximate method

Last Answer : (a) Displacement method

For structural analysis of forces, the method refers to (A) Moment-area-theorem (B) Three-moment equation (C) Maxwell's reciprocal theorem (D) None of these

Description : For structural analysis of forces, the method refers to  (A) Moment-area-theorem  (B) Three-moment equation  (C) Maxwell's reciprocal theorem  (D) None of these

Last Answer : (A) Moment-area-theorem 

In the displacement method of structural analysis, the basic unknowns are (A) Displacements (B) Force (C) Displacements and forces (D) None of the above

Description : In the displacement method of structural analysis, the basic unknowns are (A) Displacements (B) Force (C) Displacements and forces (D) None of the above

Last Answer : (A) Displacements

In the virtual work method of plastic analysis of steel structures, the virtual quantity is (a) Slope (b) Moment (c) Load (d) Displacement

Description : In the virtual work method of plastic analysis of steel structures, the virtual quantity is (a) Slope (b) Moment (c) Load (d) Displacement

Last Answer : (d) Displacement

The degree of static indeterminacy up to which column analogy method can be used is (A) 2 (B) 3 (C) 4 (D) Unrestricted

Description : The degree of static indeterminacy up to which column analogy method can be used is (A) 2 (B) 3 (C) 4 (D) Unrestricted

Last Answer : (B) 3

The width of the analogous column in the method of column analogy is (A) 2/EI (B) 1/EI (C) 1/2 EI (D) 1/4 EI

Description : The width of the analogous column in the method of column analogy is (A) 2/EI (B) 1/EI (C) 1/2 EI (D) 1/4 EI

Last Answer : (B) 1/EI

The shear resistance of a soil is constituted basically of the following component. (A) The frictional resistance to translocation between the individual soil particles at their contact point (B) To the structural relation to displacement of the soil because of the interlocking of the particles (C) Cohesion and adhesion between the surfaces of the soil particles (D) All the above

Description : The shear resistance of a soil is constituted basically of the following component. (A) The frictional resistance to translocation between the individual soil particles at their contact point (B) To the ... (C) Cohesion and adhesion between the surfaces of the soil particles (D) All the above

Last Answer : Answer: Option D

In moment distribution method, the sum of distribution factors of all the members meeting at any joint is always (A) Zero (B) Less than 1 (C) 1 (D) Greater than 1

Description : In moment distribution method, the sum of distribution factors of all the members meeting at any joint is always (A) Zero (B) Less than 1 (C) 1 (D) Greater than 1

Last Answer : (C) 1

Pick up the correct statement from the following: (A) The structural member subjected to compression and whose dimensions are small as compared to its length, is called a stmt (B) The vertical compression members are generally known as columns or stanchions (C) Deflection in lateral direction of a long column, is generally known as buckling (D) All the above

Description : Pick up the correct statement from the following:  (A) The structural member subjected to compression and whose dimensions are small as  compared to its length, is called a stmt  (B) The ... in lateral direction of a long column, is generally known as buckling  (D) All the above

Last Answer : (D) All the above

A protective or decorative non-structural element placed at the level of the truss supports and column head is called (a) Eaves girder (b) Baluster (c ) Eaves board (d) Tie girder

Description : A protective or decorative non-structural element placed at the level of the truss supports and column head is called (a) Eaves girder (b) Baluster (c ) Eaves board (d) Tie girder

Last Answer : (c ) Eaves board

What are the shortcomings of grillage analysis which is commonly used in structural analysis of bridges?

Description : What are the shortcomings of grillage analysis which is commonly used in structural analysis of bridges?

Last Answer : Grillage analysis suffers from the following shortcomings based on E. C. Hambly: (i) For coarse mesh, torques may not be identical in orthogonal directions. Similarly, twists may differ in ... moment in an element depends on the curvatures in the beam's direction and its orthogonal direction.

For structural analysis, Maxwell's reciprocal theorem can be applied to: (A) Plastic structures (B) Elastic structures (C) Symmetrical structures (D) All the above

Description : For structural analysis, Maxwell's reciprocal theorem can be applied to: (A) Plastic structures (B) Elastic structures (C) Symmetrical structures (D) All the above

Last Answer : (B) Elastic structures

Which of the following does not include different learning methods? a) Memorization b) Analogy c) Deduction d) Introduction

Description : Which of the following does not include different learning methods? a) Memorization b) Analogy c) Deduction d) Introduction

Last Answer : d) Introduction

In Torque-Voltage analogy, the Moment of Inertia of a mechanical rotational system is analogous to

Description : In Torque-Voltage analogy, the Moment of Inertia of a mechanical rotational system is analogous to (A) Capacitance C. (B) Inductance L. (C) Resistance R. (D) Inductive reactance XL

Last Answer : In Torque-Voltage analogy, the Moment of Inertia of a mechanical rotational system is analogous to Inductance L.

In the three moment equation method a. imaginary span unit span is assumed b. imaginary span zero span is assumed c. no imaginary span assumed d.twice the imaginary span is assumed

Description : In the three moment equation method a. imaginary span unit span is assumed b. imaginary span zero span is assumed c. no imaginary span assumed d.twice the imaginary span is assumed

Last Answer : b. imaginary span zero span is assumed

The equation, Nst = (f/2)/[1 + 5 (Npr - 1) √(f/2)], corresponds to __________ analogy. (A) Von-Karman (B) Reynolds (C) Colburn (D) Prandtl

Description : The equation, Nst = (f/2)/[1 + 5 (Npr - 1) √(f/2)], corresponds to __________ analogy. (A) Von-Karman (B) Reynolds (C) Colburn (D) Prandtl

Last Answer : (D) Prandtl

The equation, (NSt × N2/3 Pr ) = f/2, is the __________ analogy. (A) Colburn (B) Reynolds (C) Prandtl (D) None of these

Description : The equation, (NSt × N2/3 Pr ) = f/2, is the __________ analogy. (A) Colburn (B) Reynolds (C) Prandtl (D) None of these

Last Answer : (A) Colburn

The equation, Nst = f/2, is the __________ analogy. (A) Colburn (B) Reynolds (C) Prandtl (D) None o

Description : The equation, Nst = f/2, is the __________ analogy. (A) Colburn (B) Reynolds (C) Prandtl (D) None o

Last Answer : (B) Reynolds

While using three moments equation, a fixed end of a continuous beam is replaced by an additional span of (A) Zero length (B) Infinite length (C) Zero moment of inertia(D) None of the above

Description : While using three moments equation, a fixed end of a continuous beam is replaced by an additional span of (A) Zero length (B) Infinite length (C) Zero moment of inertia (D) None of the above

Last Answer : (A) Zero length

The most widely used method for analysing the performance of a marketing strategy is A)cost analysis. B)sales analysis. C)distribution analysis. D)promotional analysis. E)target market analysis

Description : The most widely used method for analysing the performance of a marketing strategy isA)cost analysis. B)sales analysis. C)distribution analysis. D)promotional analysis. E)target market analysis

Last Answer : B)sales analysis.

Which one of the following methods is best suited for mapping the distribution of different crops as provided in the standard classification of crops in India? (A) Pie diagram (B) Chorochromatic technique (C) Isopleth technique (D) Dot method

Description : Which one of the following methods is best suited for mapping the distribution of different crops as provided in the standard classification of crops in India? (A) Pie diagram (B) Chorochromatic technique (C) Isopleth technique (D) Dot method

Last Answer : (B) Chorochromatic technique

Which method is not included in seven Project Selection Methods? A. Financial Analysis B. Strategic Alignment C. Weighted Scoring Model D. Straight line Model (Ans.)

Description : Which method is not included in seven Project Selection Methods?  A. Financial Analysis B. Strategic Alignment C. Weighted Scoring Model D. Straight line Model (Ans.)

Last Answer : D. Straight line Model (Ans.)

Which of the following met Which of the following methods best considers intan hods best considers intangible costs related to a l gible costs related to a location decision? ocation decision? a)Weighted method b)Location break-even analysis c)Transportation method d)Assignment method e) None of the above

Description : Which of the following met Which of the following methods best considers intan hods best considers intangible costs related to a l gible costs related to a location decision? ocation decision? a) ... b)Location break-even analysis c)Transportation method d)Assignment method e) None of the above

Last Answer : b)Location break-even analysis

Product Production and ion and/or shipping costs are always considered in which of the following locat g location decision methods? a. factor rating method b. transportation method c. locational locational break-even break-even analysis analysis d. center-of-gravity center-of-gravity method

Description : Product Production and ion and/or shipping costs are always considered in which of the following locat g location decision methods? a. factor rating method b. transportation method c. locational locational break-even break-even analysis analysis d. center-of-gravity center-of-gravity method

Last Answer : b. transportation method

Which of the following following methods methods best considers considers intangible intangible costs related related to a location location decision? a. crossover crossover methods methods b. locational break-even locational break-even analysis analysis c. factor rating analysis d. the transportation transportation method e. the assignment assignment method

Description : Which of the following following methods methods best considers considers intangible intangible costs related related to a location location decision? a. crossover crossover methods methods b. ... rating analysis d. the transportation transportation method e. the assignment assignment method

Last Answer : d. the transportation transportation method

Communi Community attitudes, zoni es, zoning restrictions, and qua and quality of labor force are l ce are likely to be considered in which of the fo considered in which of the following location decis llowing location decision methods? ion methods? a. transportation transportation method b. locational break-even locational break-even analysis analysis c. center-of-gravity center-of-gravity method d. simulation e. factor rating method

Description : Communi Community attitudes, zoni es, zoning restrictions, and qua and quality of labor force are l ce are likely to be considered in which of the fo considered in which of the following ... analysis analysis c. center-of-gravity center-of-gravity method d. simulation e. factor rating method

Last Answer : e. factor rating method

Henry takes the company's sales for the past five years and calculates a growth trend. Which sales forecasting method is being employed? A)time series analysis B)executive judgement C)correlation methods D)market tests

Description : Henry takes the company's sales for the past five years and calculates a growth trend. Which sales forecasting method is being employed? A)time series analysis B)executive judgement C)correlation methods D)market tests

Last Answer : A)time series analysis

In moment distribution method the effect of applies moment on adjacent joints are a. neglected b. carried over c. multiplied by a factor before applying d. distributed over the span

Description : In moment distribution method the effect of applies moment on adjacent joints are a. neglected b. carried over c. multiplied by a factor before applying d. distributed over the span

Last Answer : b. carried over

In moment distribution method any unbalanced moment at a joint is a. neglected b. multiplied by a factor to solve c. distributed in the spans d.considered infinite

Description : In moment distribution method any unbalanced moment at a joint is a. neglected b. multiplied by a factor to solve c. distributed in the spans d.considered infinite

Last Answer : c. distributed in the spans

In moment distribution method initially all the members of the beam as assumed to be a.free b.fixed c.partially free d.partially fixed

Description : In moment distribution method initially all the members of the beam as assumed to be a.free b.fixed c.partially free d.partially fixed

Last Answer : b.fixed

Euler's formula states that the buckling load for a column of length , both ends hinged and whose least moment of inertia and modulus of elasticity of the material of the column are and respectively, is given by the relation (A) P = ²EI/l² (B) P = /EI (C) P = /l² (D) P = ²EI/l

Description : Euler's formula states that the buckling load for a column of length , both ends hinged and whose least moment of inertia and modulus of elasticity of the material of the column are and respectively, is given by the relation (A) P = ²EI/l² (B) P = /EI (C) P = /l² (D) P = ²EI/l

Last Answer : (A) P = ²EI/l²

In a combined footing for two columns carrying unequal loads, the maximum hogging bending moment occurs at (A) Less loaded column (B) More loaded column (C) A point of the maximum shear force (D) A point of zero shear force

Description : In a combined footing for two columns carrying unequal loads, the maximum hogging bending moment occurs at (A) Less loaded column (B) More loaded column (C) A point of the maximum shear force (D) A point of zero shear force

Last Answer : Answer: Option D

If W is total load per unit area on a panel, D is the diameter of the column head, L is the span in two directions, then the sum of the maximum positive bending moment and average of the negative bending moment for the design of the span of a square flat slab, should not be less than (A) WL/12 (L - 2D/3)² (B) WL/10 (L + 2D/3)² (C) WL/10 (L - 2D/3)² (D) WL/12 (L - D/3)²

Description : If W is total load per unit area on a panel, D is the diameter of the column head, L is the span in two directions, then the sum of the maximum positive bending moment and average of the negative bending moment for the design of the span ... (L + 2D/3)² (C) WL/10 (L - 2D/3)² (D) WL/12 (L - D/3)²

Last Answer : Answer: Option C

If is the net upward pressure on a square footing of side for a square column of side , the maximum bending moment is given by (A) B.M = pb (c - a)/4 (B) B.M = pb (b - a)²/4 (C) B.M = pb (b - a)²/8 (D) B.M = pb (b + a)/8

Description : If is the net upward pressure on a square footing of side for a square column of side , the maximum bending moment is given by (A) B.M = pb (c - a)/4 (B) B.M = pb (b - a)²/4 (C) B.M = pb (b - a)²/8 (D) B.M = pb (b + a)/8

Last Answer : Answer: Option C

The base of a column is subjected to moment. If the intensity of bearing pressure due to axial load is equal to stress due to moment, then the bearing pressure between the base and the concrete is (a) Uniform compression throughout (b) Zero at one end and compression at the other end (c) Tension at one end and compression at the other end (d) Compression, verying as a parabolic profile

Description : The base of a column is subjected to moment. If the intensity of bearing pressure due to axial load is equal to stress due to moment, then the bearing pressure between the base and the concrete ... Tension at one end and compression at the other end (d) Compression, verying as a parabolic profile

Last Answer : (b) Zero at one end and compression at the other end

In PERT analysis, the time estimates of activities and probability of their occurrence follow (A) Normal distribution curve (B) Poisson's distribution curve (C) Beta distribution curve (D) None of the above

Description : In PERT analysis, the time estimates of activities and probability of their occurrence follow (A) Normal distribution curve (B) Poisson's distribution curve (C) Beta distribution curve (D) None of the above

Last Answer : (C) Beta distribution curve

The probability distribution taken to represent the completion of time in PERT analysis is (a) Normal Distribution (b) Bet Distribution (c) Gamma Distribution (d) Gaussain Distribution

Description : The probability distribution taken to represent the completion of time in PERT analysis is (a) Normal Distribution (b) Bet Distribution (c) Gamma Distribution (d) Gaussain Distribution

Last Answer : (a) Normal Distribution

Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio (above the minimum reflux ratio), the fixed cost of the distillation column first increases and then decreases (C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Description : Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio ( ... (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Last Answer : C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux

What is the ratio of displacement thickness to nominal thickness for a linear distribution of velocity in the boundary layer on a flat plate? (A) 0.5 (B) 1 (C) 1.5 (D) 2

Description : What is the ratio of displacement thickness to nominal thickness for a linear distribution of velocity in the boundary layer on a flat plate? (A) 0.5 (B) 1 (C) 1.5 (D) 2

Last Answer : (A) 0.5

For thermal analysis, the field variable is a.stress b.strain c.displacement d.Temperature

Description : For thermal analysis, the field variable is a.stress b.strain c.displacement d.Temperature

Last Answer : d.Temperature

Consider the following assumption made in the analysis of a jet impinging normally on a moving plate to introduce the principle of moment of momentum: 1. Friction between jet and plate is neglected. 2. Flow is steady 3. Impinging momentum of jet is uncharged. 4. Plate moves at a constant velocity. Which of these statements are relevant? (a) 1, 2 & 4 only (b) 1, 2 & 3 only (c) 2, 3 and 4 only (d) 1, 2, 3 & 4

Description : Consider the following assumption made in the analysis of a jet impinging normally on a moving plate to introduce the principle of moment of momentum: 1. Friction between jet and plate is neglected. 2. Flow is steady 3. Impinging momentum of ... b) 1, 2 & 3 only (c) 2, 3 and 4 only (d) 1, 2, 3 & 4

Last Answer : (a) 1, 2 & 4 only

Different learning method does not include: a) Memorization b) Analogy c) Deduction d) Introduction

Description : Different learning method does not include: a) Memorization b) Analogy c) Deduction d) Introduction

Last Answer : d) Introduction

The number of moment equation in Clapeyron’s method is a.2 b.3 c.4 d.5

Description : The number of moment equation in Clapeyron’s method is a.2 b.3 c.4 d.5

Last Answer : b.3

How to write a structural analysis of a script?

Description : How to write a structural analysis of a script?

Last Answer : You should have a good introduction, explaining the environment and the characters.

What types of models are created during software requirements analysis? (A) Functional and behavioral (B) Algorithmic and data structure (C) Architectural and structural (D) Usability and reliability

Description : What types of models are created during software requirements analysis? (A) Functional and behavioral (B) Algorithmic and data structure (C) Architectural and structural (D) Usability and reliability

Last Answer : (A) Functional and behavioral

Horizontal analysis is also known as ----------------------- a) Static analysis b) Structural analysis c) Dynamic analysis d) None of these

Description : Horizontal analysis is also known as ----------------------- a) Static analysis b) Structural analysis c) Dynamic analysis d) None of these

Last Answer : c) Dynamic analysis

A beam is a structural member which is subjected to (a) Axial tension or compression (b) Transverse loads and couples (c) Twisting moment (d) No load, but its axis should be horizontal and x-section rectangular or circular

Description : A beam is a structural member which is subjected to (a) Axial tension or compression (b) Transverse loads and couples (c) Twisting moment (d) No load, but its axis should be horizontal and x-section rectangular or circular

Last Answer : b) Transverse loads and couples