One of the Lehmann's rules of plane tabling, is (A) Location of the instrument station is always distant from each of the three rays from the known points in proportion to their distances (B) When looking in the direction of each of the given points, the instrument station will be on the right side of one and left side of the other ray (C) When the instrument station is outside the circumscribing circle its location is always on the opposite side of the ray to the most distant point as the inter-section of the other two rays (D) None of these

One of the Lehmann's rules of plane tabling, is 

(A) Location of the instrument station is always distant from each of the three rays from the 

known points in proportion to their distances 

(B) When looking in the direction of each of the given points, the instrument station will be on 

the right side of one and left side of the other ray 

(C) When the instrument station is outside the circumscribing circle its location is always on the 

opposite side of the ray to the most distant point as the inter-section of the other two rays 

(D) None of these 

by

1 Answer

Answer :

(A) Location of the instrument station is always distant from each of the three rays from the 

known points in proportion to their distances 

by

Related questions

The 'fix' of a plane table station with three known points, is bad if the plane table station lies (A) In the great triangle (B) Outside the great triangle (C) On the circumference of the circumscribing circle (D) None of these

Description : The 'fix' of a plane table station with three known points, is bad if the plane table station lies  (A) In the great triangle  (B) Outside the great triangle  (C) On the circumference of the circumscribing circle  (D) None of these 

Last Answer : (C) On the circumference of the circumscribing circle 

While working on a plane table, the correct rule is: (A) Draw continuous lines from all instrument stations (B) Draw short rays sufficient to contain the points sought (C) Intersection should be obtained by actually drawing second rays (D) Take maximum number of sights as possible from each station to distant objects

Description : While working on a plane table, the correct rule is: (A) Draw continuous lines from all instrument stations (B) Draw short rays sufficient to contain the points sought (C) Intersection ... drawing second rays (D) Take maximum number of sights as possible from each station to distant objects

Last Answer : (B) Draw short rays sufficient to contain the points sought

The instrument which is used in plane tabling for obtaining horizontal and vertical distances directly without resorting to chaining, is known as (A) Plane alidade (B) Telescopic alidade (C) Clinometer (D) Tacheometer

Description : The instrument which is used in plane tabling for obtaining horizontal and vertical distances directly without resorting to chaining, is known as (A) Plane alidade (B) Telescopic alidade (C) Clinometer (D) Tacheometer

Last Answer : (B) Telescopic alidade

The operation of resection involves the following steps 1. Rough orientation of the plane table 2. The three lines form a triangle of error 3. Drawing lines back through the three control points 4. Select a point in the triangle of error such that each ray is equally rotated either clockwise or anti clockwise 5. The points obtained by three rays are the correct location. The correct sequence is (A) 1, 3, 2, 4, 5 (B) 1, 2, 3, 4, 5 (C) 1, 4, 3, 2, 5 (D) 1, 3, 2, 4, 5

Description : The operation of resection involves the following steps 1. Rough orientation of the plane table 2. The three lines form a triangle of error 3. Drawing lines back through the three control points 4. Select a point in the triangle of error ... 2, 3, 4, 5 (C) 1, 4, 3, 2, 5 (D) 1, 3, 2, 4, 5

Last Answer : (A) 1, 3, 2, 4, 5

The method of plane tabling commonly used for establishing the instrument station is a method of (a) Radiation (b) Intersection* (c) Resection (d) Traversing

Description : The method of plane tabling commonly used for establishing the instrument station is a method of (a) Radiation (b) Intersection* (c) Resection (d) Traversing

Last Answer : (b) Intersection*

If bisectors of opposite angles of a cyclic quadrilateral ABCD intersect the circle, circumscribing it at the points P and Q, prove that PQ is a diameter of the circle. -Maths 9th

Description : If bisectors of opposite angles of a cyclic quadrilateral ABCD intersect the circle, circumscribing it at the points P and Q, prove that PQ is a diameter of the circle. -Maths 9th

Last Answer : Given, ABCD is a cyclic quadrilateral. DP and QB are the bisectors of ∠D and ∠B, respectively. To prove PQ is the diameter of a circle. Construction Join QD and QC.

If bisectors of opposite angles of a cyclic quadrilateral ABCD intersect the circle, circumscribing it at the points P and Q, prove that PQ is a diameter of the circle. -Maths 9th

Description : If bisectors of opposite angles of a cyclic quadrilateral ABCD intersect the circle, circumscribing it at the points P and Q, prove that PQ is a diameter of the circle. -Maths 9th

Last Answer : Given, ABCD is a cyclic quadrilateral. DP and QB are the bisectors of ∠D and ∠B, respectively. To prove PQ is the diameter of a circle. Construction Join QD and QC.

For locating a distant object visible from two transit stations, the method usually preferred to, is (A) Angles and distances from transit stations (B) Angles from two transit stations (C) Distance from two transit stations (D) Angle from one transit station and distance from the other

Description : For locating a distant object visible from two transit stations, the method usually preferred to, is  (A) Angles and distances from transit stations  (B) Angles from two transit stations  ... from two transit stations  (D) Angle from one transit station and distance from the other 

Last Answer : (B) Angles from two transit stations 

The 'fix' of a plane table from three known points, is good, if (A) Middle station is nearest (B) Middle station is farthest (C) Either the right or left station is nearest (D) None of these

Description : The 'fix' of a plane table from three known points, is good, if  (A) Middle station is nearest  (B) Middle station is farthest  (C) Either the right or left station is nearest  (D) None of these 

Last Answer : (A) Middle station is nearest 

A and B are two towers of equal height diametrically opposite on either side of the nadir point, at 3 km and 5 km distances. Which one of the following statements is correct? (A) Height displacement of A will be less than that of B (B) Height displacement of B will be less than that of A (C) Height displacement of A and B is equal (D) Height displacement of A and B will be towards each other

Description : A and B are two towers of equal height diametrically opposite on either side of the nadir point, at 3 km and 5 km distances. Which one of the following statements is correct? (A) Height displacement ... of A and B is equal (D) Height displacement of A and B will be towards each other

Last Answer : Answer: Option A

Locating the position of a plane table station with reference to three known points, is known as (A) Intersection method (B) Radiation method (C) Resection method (D) Three point problem

Description : Locating the position of a plane table station with reference to three known points, is known as (A) Intersection method (B) Radiation method (C) Resection method (D) Three point problem

Last Answer : (D) Three point problem

Subtense bar is an instrument used for (A) Levelling (B) Measurement of horizontal distances in plane areas (C) Measurement of horizontal distances in undulated areas (D) Measurement of angles

Description : Subtense bar is an instrument used for (A) Levelling (B) Measurement of horizontal distances in plane areas (C) Measurement of horizontal distances in undulated areas (D) Measurement of angles

Last Answer : (C) Measurement of horizontal distances in undulated areas

Which one of the following procedures for getting accurate orientation is the most distinctive feature of the art of plane tabling? (A) Radiation (B) Intersection (C) Traversing (D) Resection

Description : Which one of the following procedures for getting accurate orientation is the most distinctive feature of the art of plane tabling? (A) Radiation (B) Intersection (C) Traversing (D) Resection

Last Answer : (D) Resection

While surveying a plot of land by plane tabling, the field observations (A) And plotting proceed simultaneously (B) And plotting do not proceed simultaneously (C) And recorded in field books to be plotted later (D) All the above

Description : While surveying a plot of land by plane tabling, the field observations (A) And plotting proceed simultaneously (B) And plotting do not proceed simultaneously (C) And recorded in field books to be plotted later (D) All the above

Last Answer : (A) And plotting proceed simultaneously

Two dimensional flows occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at successive periods of time (C) The magnitude and direction of the velocity do not change from point to point in the fluid (D) The fluid particles move in plane or parallel planes and the streamline patterns are identical in each plan

Description : Two dimensional flows occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at ... fluid particles move in plane or parallel planes and the streamline patterns are identical in each plan

Last Answer : Answer: Option D

Uniform flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at successive periods of time (C) The magnitude and direction of the velocity do not change from point to point in the fluid ) The fluid particles move in plane or parallel planes and the streamline patterns are identical in each pleasure

Description : Uniform flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at ... fluid particles move in plane or parallel planes and the streamline patterns are identical in each pleasure

Last Answer : Answer: Option C

True one-dimensional flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at successive periods of time (C) The magnitude and direction of the velocity do not change from point to point in the fluid (D) The fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane

Description : True one-dimensional flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same ... fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane

Last Answer : Answer: Option A

Non uniform flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at successive periods of time (C) Velocity, depth, pressure, etc. change from point to point in the fluid flow. (D) The fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane

Description : Non uniform flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at ... The fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane

Last Answer : Answer: Option C

Steady flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at successive periods of time (C) The magnitude and direction of the velocity do not change from point to point in the fluid (D) The fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane

Description : Steady flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at successive ... fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane

Last Answer : Answer: Option B

A pilot can improve the probability of detecting other aircrafts by: a. Minimizing the duration of eye rests and making as many eye movements as possible b. Moving the head frequently to alter the apparent motion of any distant object c. Maximizing the time spent looking in each sector to allow the maximum chance of detecting movement d. Maintaining as far as possible a lookout ahead of the aircraft and relying on peripheral vision to detect any movement from the side

Description : A pilot can improve the probability of detecting other aircrafts by: a. Minimizing the duration of eye rests and making as many eye movements as possible b. Moving the head frequently to ... lookout ahead of the aircraft and relying on peripheral vision to detect any movement from the side

Last Answer : a. Minimizing the duration of eye rests and making as many eye movements as possible

A pilot can improve the probability of detecting other aircrafts by: a. Minimizing the duration of eye rests and making as many eye movements as possible b. Moving the head frequently to alter the apparent motion of any distant object c. Maximizing the time spent looking in each sector to allow the maximum chance of detecting movement d. Maintaining as far as possible a lookout ahead of the aircraft and relying on peripheral vision to detect any movement from the side

Description : A pilot can improve the probability of detecting other aircrafts by: a. Minimizing the duration of eye rests and making as many eye movements as possible b. Moving the head frequently to ... a lookout ahead of the aircraft and relying on peripheral vision to detect any movement from the side

Last Answer : a. Minimizing the duration of eye rests and making as many eye movements as possible

The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Description : The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Last Answer : (A) Chain surveying

In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder (C) Velocity profile varies hyperbolically and the shear stress remains constant over the cross-section (D) Average flow occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Description : In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a ... occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Last Answer : (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder

Pick up the correct statement from the following: (A) The theodolite in which telescope can be rotated in vertical plane is called a transmit (B) When the vertical circle is to the left of the telescope during observation, it is called to be in left face (C) When the vertical circle is to the right of the telescope during observation, it is called to be in right face (D) All the above

Description : Pick up the correct statement from the following:  (A) The theodolite in which telescope can be rotated in vertical plane is called a transmit  (B) When the vertical circle is to the left of ... the telescope during observation, it is called to be  in right face  (D) All the above 

Last Answer : (D) All the above 

In a plane-table survey, the process of determining the plotted position of a station occupied by the plane-table by means of sights taken towards known points, the locations of which have already been plotted, is known as (a) Radiation (b) Resection (c) Intersection (d) Traversing

Description : In a plane-table survey, the process of determining the plotted position of a station occupied by the plane-table by means of sights taken towards known points, the locations of which have already been plotted, is known as (a) Radiation (b) Resection (c) Intersection (d) Traversing

Last Answer : (b) Resection

While setting a plane table at a station it was found that the error in centering was 30 cm away from the ray of length 40 m drawn from the station. If the scale of the plan is 1 cm = 2 cm, the displacement of the end of the ray in plan from the true position will be (A) 0.02 cm (B) 0.15 cm (C) 0.2 cm (D) 0.1 cm

Description : While setting a plane table at a station it was found that the error in centering was 30 cm away from the ray of length 40 m drawn from the station. If the scale of the plan is 1 cm = 2 cm, the displacement of the end of ... true position will be (A) 0.02 cm (B) 0.15 cm (C) 0.2 cm (D) 0.1 cm

Last Answer : (B) 0.15 cm

The intensity of direct longitudinal stress in the cross-section at any point distant r from the neutral axis, is proportional to (A) r (B) 1/r (C) r2 (D) 1/r²

Description : The intensity of direct longitudinal stress in the cross-section at any point distant r from the neutral axis, is proportional to (A) r (B) 1/r (C) r2 (D) 1/r²

Last Answer : (A) r

I have never driven a car in countries outside the USA that use the left side lane and steering wheel on right side of the car. Is it difficult to adjust to the left side of the road and opposite side steering wheel (in Ireland)?

Description : I have never driven a car in countries outside the USA that use the left side lane and steering wheel on right side of the car. Is it difficult to adjust to the left side of the road and opposite side steering wheel (in Ireland)?

Last Answer : Your question will most certainly have subjective answers. Personally, I have driven in Japan where they have right-hand side steering wheels and driving on the left side of the road. The ... look for similar driving patterns, like staying within the lines, and being cognizant of the environment.

Write any four advantages of intersection method of plane tabling over radiation method of plane tabling.

Description : Write any four advantages of intersection method of plane tabling over radiation method of plane tabling.

Last Answer : Advantages of intersection method: 1. Interection method requires less ground distance measurement than radiation method. 2. By this method we can locate inaccessible points which cannot be ... to radiation method, intersection method eliminates undulation error, bisection error and plotting errors.

Explain errors occurred due to manipulation and sighting in plane tabling.

Description : Explain errors occurred due to manipulation and sighting in plane tabling.

Last Answer : i) The board not being horizontal- This error affects chiefly the measurement of vertical angles. ii) The table not being accurately centered. The plotted position of the occupied station not ... and correct any displacement. v) The defective sighting- The object not being correctly sighted.

Define orientation and principle of plane tabling.

Description : Define orientation and principle of plane tabling. 

Last Answer : Orientation: The orientation of plane table means keeping the plane table at all stations parallel to the position it occupied at first station. Principles of plane table survey: 1. The rays drawn from ... same as that of previous station i.e. orientation should be done at each changed station.  

Enlist the methods of plane tabling.

Description : Enlist the methods of plane tabling. 

Last Answer : Method of Surveying with the plane table are : 1) Radiation 2) Intersection 3) Traversing 4) Resection

Explain with neat sketch the procedure of radiation method of plane tabling.

Description : Explain with neat sketch the procedure of radiation method of plane tabling.

Last Answer : 1. The table is set at suitable station e.g. P from where all stations can be sighted and measured. 2. After centering and leveling, mark station P as P' on sheet. 3. Suppose stations A, B, C, and D are ... marked as pa. 5. Similarly station B, C and D are bisected and marked as b, c and d.

What are the sources of errors in plane tabling?

Description : What are the sources of errors in plane tabling?

Last Answer : The following are the sources of errors in plane tabling 1) The board not being horizontal 2) The table not being accurately centered 3) The table not being Correctly oriented 4) The objects ... through the station point 7) Inaccuracy in plotting 8) The expansion and contraction of the paper 

For determining the support reactions at A and B of a three hinged arch, points B and Care joined and produced to intersect the load line at D and a line parallel to the load line through A at D'. Distances AD, DD' and AD' when measured were 4 cm, 3 cm and 5 cm respectively. The angle between the reactions at A and B is (A) 30° (B) 45° (C) 60° (D) 90

Description : For determining the support reactions at A and B of a three hinged arch, points B and Care joined  and produced to intersect the load line at D and a line parallel to the load line through A at D'.  Distances AD, DD ... reactions at A and B is  (A) 30°  (B) 45°  (C) 60°  (D) 90

Last Answer : (D) 90

A student zips on his scooter to ride to the train station to get to college. His home is close to two stops; the first one is a mile from home, and the second is two miles from home in the opposite direction. In the morning, he always gets on at the first stop and in the afternoon, he always gets off at the second one.Why? -Riddles

Description : A student zips on his scooter to ride to the train station to get to college. His home is close to two stops; the first one is a mile from home, and the second is two miles from home in the ... gets on at the first stop and in the afternoon, he always gets off at the second one.Why? -Riddles

Last Answer : The sations and his home are on a hill, which allows him to ride down easily on his scooter.

In wireless distribution system __________ a) multiple access point are inter-connected with each other b) there is no access point c) only one access point exists d) access points are not required

Description : In wireless distribution system __________ a) multiple access point are inter-connected with each other b) there is no access point c) only one access point exists d) access points are not required

Last Answer : a) multiple access point are inter-connected with each other

According to law of triangle of forces (A) Three forces acting at a point will be in equilibrium (B) Three forces acting at a point can be represented by a triangle, each side being proportional to force (C) If three forces acting upon a particle are represented in magnitude and direction by the sides of a triangle, taken in order, they will be in equilibrium (D) If three forces acting at a point are in equilibrium, each force is proportional to the sine of the angle between the other two

Description : According to law of triangle of forces  (A) Three forces acting at a point will be in equilibrium  (B) Three forces acting at a point can be represented by a triangle, each side ... point are in equilibrium, each force is proportional to the sine of  the angle between the other two 

Last Answer : (C) If three forces acting upon a particle are represented in magnitude and direction by the  sides of a triangle, taken in order, they will be in equilibrium

According to Lami's theorem (A) Three forces acting at a point will be in equilibrium (B) Three forces acting at a point can be represented by a triangle, each side being proportional to force (C) If three forces acting upon a particle are represented in magnitude and direction by the sides of a triangle, taken in order, they will be in equilibrium (D) If three forces acting at a point are in equilibrium, each force is proportional to the sine of the angle between the other two

Description : According to Lami's theorem (A) Three forces acting at a point will be in equilibrium (B) Three forces acting at a point can be represented by a triangle, each side being proportional to ... point are in equilibrium, each force is proportional to the sine of the angle between the other two

Last Answer : Answer: Option D

The horizontal angles from the boat between A and B and B and C, the stations on the shore are 1 2. The distances AB = L1 and BC = L2 2 at C between the boat and station B between A and C at B). (A) 1 2) = (L2 1/L1 2) = K (B) t 2 = 360° - 1 2 (C) 2 = sin /(K + ) (D) All the above

Description : The horizontal angles from the boat between A and B and B and C, the stations on the shore are 1 2. The distances AB = L1 and BC = L2 2 at C between the boat and station B between A and C at B). (A) 1 2) = (L2 1/L1 2) = K (B) t 2 = 360° - 1 2 (C) 2 = sin /(K + ) (D) All the above

Last Answer : (D) All the above

n the DNA molecule, (a) the proportion of adenine in relation to thymine varies with the organism (b) there are two strands which run anti- parallel-one in 5′ → 3′ direction and other in 3′ → 5′ (c) the total amount of purine nucleotides and pyrimidine nucleotides is not always equal (d) there are two strands which run parallel in the 5′ → 3′ direction.

Description : n the DNA molecule, (a) the proportion of adenine in relation to thymine varies with the organism (b) there are two strands which run anti- parallel-one in 5′ → 3′ direction and other in 3′ → ... is not always equal (d) there are two strands which run parallel in the 5′ → 3′ direction.

Last Answer : (b) there are two strands which run anti- parallel-one in 5′ → 3′ direction and other in 3′ → 5′

The section of a reinforced beam where most distant concrete fibre in compression and tension in steel attains permissible stresses simultaneously, is called (A) Balanced sectionB) Economic section (C) Critical section (D) All the above

Description : The section of a reinforced beam where most distant concrete fibre in compression and tension in steel attains permissible stresses simultaneously, is called (A) Balanced section B) Economic section (C) Critical section (D) All the above

Last Answer : Answer: Option D

The section of a reinforced beam where most distant concrete fiber in compression and tension in steel attains permissible stresses simultaneously is called (i)Balanced section (ii)Economic section (iii)Critical section [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Description : The section of a reinforced beam where most distant concrete fiber in compression and tension in steel attains permissible stresses simultaneously is called (i)Balanced section (ii)Economic section (iii)Critical section [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Last Answer : [ D ] i, ii and iii

When a train is rounding a curve to prevent side thrust on the wheel flanges of cars a.Opposite thrust is created to counter balance this thrust b.Guide rail sections are provided to take care of thrust c.Thrust eliminators are provided in the train d.Outside rails are realised e.Rail section is made thick on curvature

Description : When a train is rounding a curve to prevent side thrust on the wheel flanges of cars a.Opposite thrust is created to counter balance this thrust b.Guide rail sections are provided to take care of ... are provided in the train d.Outside rails are realised e.Rail section is made thick on curvature

Last Answer : d. Outside rails are realised

Ray Whitcombe is found dead in his office at his desk. The police have narrowed the suspects down to three people: Mrs. Barbara Whitcombe, Ray's wife; Mr. Jason McCubbins, Ray's business partner; and Mr. Harold Nichols, Ray's best friend. All three visited Mr. Whitcombe the day of his murder, but all three provide the police with stories of explanation as to the reason for their visit. Police found Mr. Whitcombe with his wrist watch still on his right arm, a torn up picture of his wife laying on the floor beside the trash can, and an ink pen in his right hand. On the desk, the police found a name plate, a telephone that was off the hook, and a personal calendar turned to the July 5th page with 7B91011 written on it. After examining this evidence, the police knew their suspect. Who was it?

Description : Ray Whitcombe is found dead in his office at his desk. The police have narrowed the suspects down to three people: Mrs. Barbara Whitcombe, Ray's wife; Mr. Jason McCubbins, Ray's business partner; ... written on it. After examining this evidence, the police knew their suspect. Who was it? -Riddles

Last Answer : Jason McCubbins, Ray's business partner. The calendar is the clue to solving this murder. The police realized that since Mr. Whitcombe was wearing his watch on his right arm, he must be left handed. But ... September, October, November. Use the first letter of each month and it spells J-A-S-O-N.

When a load crosses a through type Pratt truss in the direction left to right, the nature of force in any diagonal member in the left half of the span would (A) Change from compression to tension (B) Change from tension to compression (C) Always be compression (D) Always be tension

Description : When a load crosses a through type Pratt truss in the direction left to right, the nature of force in any diagonal member in the left half of the span would (A) Change from compression to tension (B) Change from tension to compression (C) Always be compression (D) Always be tension

Last Answer : (A) Change from compression to tension

1. Consider a circular loop of wire lying in the plane of the table. Let the current pass through the loop clockwise. Apply the right-hand rule to find out the direction of the magnetic field inside and outside the loop. -Physics-10

Description : 1. Consider a circular loop of wire lying in the plane of the table. Let the current pass through the loop clockwise. Apply the right-hand rule to find out the direction of the magnetic field inside and outside the loop. -Physics-10

Last Answer : Solution: For the downward direction of the current, the direction of the magnetic field will be as if emerging from the table outside the loop and merging with the table inside the loop. Similarly, ... the table outside the loop and merging with the table inside the loop, as shown in the figure.

Select the incorrect statement from the following In eccentrically loaded columns, [ A ] The tensile strength of concrete is ignored [ B ] Design stress – strain curve for steel in compression is the same as in tension [ C ] The strain at different points in the section will be same [ D ] Plane section remain plane even after bending

Description : Select the incorrect statement from the following In eccentrically loaded columns, [ A ] The tensile strength of concrete is ignored [ B ] Design stress - strain curve for steel in compression is the ... different points in the section will be same [ D ] Plane section remain plane even after bending

Last Answer : [ C ] The strain at different points in the section will be same

The centroid of a triangle is at the inter-section of a.perpendicular bisectors b.107 dynes c.base and perpendicular from opposite vertex d.perpendiculars down from the corners e.medians

Description : The centroid of a triangle is at the inter-section of a.perpendicular bisectors b.107 dynes c.base and perpendicular from opposite vertex d.perpendiculars down from the corners e.medians

Last Answer : e. medians